Used Ake 180X39X35/Dp for sale (2,128)

Condition: good (used), Heating fan, mobile heater, gas heater, gas blower -Power: adjustable 50 kW -Consumption: 2-4 kg/h -Connection pressure: 0.35-3.0 bar -Air flow rate: 1570 m³/h -Weight: 32 kg Hnjdjb A S Daopfx Ap Hsn

Condition: good (used), Diaphragm pump, centrifugal pump, water pump, chemical pump -Flow rate: 125 l/min -pneumatically driven -Connection: 8 bar max. -Dimensions: 330/280/H260 mm -Weight: 28 kg Hnodpfx Aob A N Uusp Hjn

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Performance: TA 2.0 Nm -Speed: 500 rpm -Shaft: Ø 24 mm Hjdpfxedkzv Io Ap Honn -Construction: B3 -Number: 1x available -Price: per piece -Dimensions: 285/235/H176 mm -Weight: 16.5 kg

Condition: used, Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Stations: 10 Hodpeb S Hufsfx Ap Honn -Price: per station -Weight: 0.4 kg/piece

Condition: used, PLC control, expansion module, interface module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module, DP master interface -Manufacturer: Siemens, Simatic DP master interface -Type: 6ES7 138-4HAOO-OABO -Number: 1x module available -Price per piece -Dimensions: 75/45/H1220 mm Hnjdpfx Apsh Dnibe Hon -Weight: 0.1 kg/pc.

Condition: new, pressure 1000 kg throat 95.0 mm table length 120 mm table width 120 mm total power requirement manuell kW weight of the machine ca. 17.0 kg Hnsdpfx Apexabduj Hsn dimensions of the machine ca. 270 x 130 x 330 mm Description: - For pressing in and out bearings, bushings, etc. - Made of torsion-resistant steel - Includes mounting holes, ideal for mounting on a workbench - Suitable for bushing removal, straightening, bending, reaming, etc. - Adjustable lever bar, depending on the required force - Ideal for repair shops and general workshop use

Condition: new, pressure 5,0 t throat 215 mm workpiece height max. 445 mm Mandrel diameter 50 x 50 x 645 mm table plate Ø 275 mm total power requirement manuell kW weight of the machine ca. 160 kg. dimensions of the machine ca. 370 x 550 x 810 mm Hjdpfjxabxfox Ap Henn Description : - for pressing in and out of bearings, bushings, ... - the basic body of the model DP 5 made of high-quality gray cast iron - Includes mounting holes, ideal for mounting on a workbench - suitable for bushing, straightening, bending, broaching, ... - variably adjustable lever bar, depending on the required effort - ideal for repair shops and the general workshop area

Year of construction: 2010, condition: used, Gostol DP 10-F-OR-2900 bowl lift suitable for Escher bowls lifting height approx. 290cm total height 420cm dough scraping unit safety cage max. 1000 kg lifting weight Hjdpfx Apoiv Alnj Hjnn year of build 2010 pictures BEFORE reconditioning

Year of construction: 2010, condition: used, Gostol DP 10-F-OR-2900 bowl lift suitable for Escher bowls Hjdpeiv Alrjfx Ap Hsnn lifting height approx. 290cm total height 420cm dough scraping unit safety cage max. 1000 kg lifting weight year of build 2010 pictures BEFORE reconditioning

Condition: used, functionality: fully functional, machine/vehicle number: CT1453160, Year of construction: 2014, operating hours: 5,462 h, load capacity: 3,500 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,160 mm, drive type: Diesel, Diesel forklift Chassis number: CT1453160 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Hnodpfx Aswqh Uqjp Hsn Description: Caterpillar DP 35 NT, No.: R0581, Year of manufacture: 2014, Operating hours: 5,462, Lift height: 7000 mm, Fork positioner, side shift and telescopic forks. The machine is in good optical and good technical condition. Fast and straightforward transport possible by arrangement! This listing is for identification of the equipment only! A detailed description of the condition and possible features will be provided individually upon request! Subject to errors and prior sale, sale to businesses only. All sales of used equipment are made without any warranty or guarantee. If you have not found your forklift, please contact us. We have a wide range of other equipment available on site. 3rd valve, 4th valve,

Condition: used, Year of construction: 1997, functionality: fully functional, System consisting of: Hsdpfx Apjyh Hl Sj Henn Welding robot Romat 310, ROTROL 32 TM controller and programming handset with cable, connecting cable for robot control cabinet Pedestal for robot Tactile sensor, arc seam tracking Drive for Micro SD card for program backup incl. 2 cards Quinto 503 welding machine, wire feeder Welding torch MRW 380, torch hose package Duo drive wire feed unit, torch testing gauge 15 kg wire spool holder, drum equipment Mechanical cleaning, pressure booster 2-station rotary table 4 DP 2200 (load capacity 220 kg per station) 5 m connecting cable to control cabinet 1 light barrier 1 pre-selection start Wiring diagrams Documentation, functional warranty Delivery date: immediately available

Condition: used, Year of construction: 1976, wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 (100) mm Hnjdpfx Apokk Exj Hjn output: 300 St./min.

Condition: used, Profibus Coupler + Accessories (Bus Coupler) BECKHOFF Type BK 3100 Profibus Coupler DP/FMS Accessories: Hodpfx Asxcivwep Honn 1 x Beckhoff KL 9010 bus terminal, serial no. 39040001 2 x Beckhoff KL 2114 digital output, serial no. 38040004 3 x Beckhoff KL 1104 digital input, serial no. 38040003 Dimensions (L/W/H): 120 x 70 x 100 mm Weight:

Condition: new, M&S Gruseck GmbH NEW screening baskets from the specialist – 100% MADE IN GERMANY! Screening baskets suitable for the Doppstadt AK series 430, 435, 510, 535, 560, 635, 640, etc. - TOP QUALITY - Various perforations - Short delivery times Many other spare parts also available from stock: Hedpfxexp Nzmo Ap Honn - Rear screens - Tailgates - Various impact plates - Wear plates - Scraper floor rails - Hammers - Hammer holders - ... AND MUCH MORE!

Condition: good (used), functionality: not functional, We are selling our MGI Meteor DP 8700 XL. It's from the Igepa showroom and has just printed approximately 400,000 prints. It was taken out of service approximately three years ago and has been in our warehouse ever since. Its hardware needs to be upgraded so that it can also recognize non-chipped toner cartridges. Since we have switched to other printing machines, we haven't done this anymore, and the buyer would have to do it. Hodpfx Apowbdk Nj Honn It's stored safely and dry in the warehouse and is ready for transport.

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Length 3500 mm Hnodsv Hx R Nepfx Ap Hsn weight approx. 22 tons

Condition: new, Year of construction: 2025, Power: 750 W / 400 V Drilling capacity in steel: 25 mm Speed range: 60 – 3050 rpm Spindle taper: MK3 Quill stroke: 95 mm Spindle reach: 209 mm Table size: 308 mm x 308 mm Quick-action chuck: 1 – 16 mm Weight: 107 kg Hjdpfx Ajir Embjp Hsnn

Condition: like new (used), New industrial welding machine WELDKAR Multi-GMAW 400S DP Multi-GMAW 400S DP Features: Hnodpfsxf Nviex Ap Hsn TIG HF, LIFT TIG, MMA, MIG Double-pulse MIG Synergic operation Input voltage: 3-phase AC 400 V ± 10% Selectable water/air cooling IGBT module High duty cycle MCU control system Enhanced protection Tested at 550 V Generator-friendly Power supply: 3-phase Duty cycle: 60% at 400 A / 100% at 310 A Enables activation of dedicated pulse curves for aluminium, mild steel, and CuSi3 Waveform control for additional arc stability, even at low currents Digital control of all welding parameters Generator-friendly design allows cooperation with diesel generators, preventing failures caused by voltage spikes Protections include phase loss, overheating, overvoltage, undervoltage, and overcurrent NET PRICE: 10,000 GROSS PRICE: 12,300

Condition: new, Shaft diameter: 480working speed: 3-6motor power: 22length: 2500width: 2200heigth: 2300weight approx.: 9300 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,-- Hnjdjh Alh Ropfx Ap Hjn

Condition: new, Shaft diameter: 580working speed: 2-5motor power: 30length: 3000width: 2310heigth: 3100weight approx.: 16500 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal  working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD Hnsdeh Alh Uepfx Ap Hsn - NC Unit 10 Screen  EURO 11.500,--

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, YAMADA DOBBY Model: DP-35CS Capacity: 35ton Stroke: 30mm SPM: 150~500 Hnsdpfx Aoylr Nmsp Hsn Die Height: 260mm Slide Adjustment: 50mm Slide Area: 320 x 250mm Bolster: 600 x 390 x 100mm Bed Opening: 350 x 120mm Manufactured Year: 1994

Condition: like new (used), Vacuum filler Continuous vacuum filler for straight filling and portioning Filling mechanism: with rotary vane pump with 16 sliding rules, standard Hopper approx. 250 liters, with loading screw, dismantable, with limiter Built-in portioning computer PC Portion weight: 5 - 60.000 gr Filling speed: 0 - 100 % depending on type of the wrapper and portion size Steplessly adjustable filling speed VEMAG lifting device Built-in Hydraulic leading Access also from backside Arm Nirosta for standard trolley according to DIN 9797, 200 liters volume Hnodpfx Apsu Ndlbj Hsn Machine dimensions in cm: Width: 130,0 Length: 220,0 Height: 200,0 Installed power: 9,5 kW Voltage: 380 V, 50 Hz Weight: approx. 1 300 kg

Condition: excellent (used), Rademaker block processor with Rondo make up line. Has been producing 'Salmon en croute' for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Hnedpfx Asiabu Uep Hen Mainly used seasonally so only 11,800 running hours.

Condition: used, REF: MM6452 1 x Baker Perkins travelling oven with 15m long x 1580mm wide belt NOTE: Belt missing 12 x sections/lines. Hjdpfx Aezccfgep Hjnn All equipment to be removed from the factory by the Buyer.

Year of construction: 2003, condition: excellent (used), functionality: fully functional, LINE 2 - Muffin/cake depositing, baking and filling line, comprising of: Hsdpfx Aozcb E Sop Hjnn 1 x Comas MUFFIN LINE 8-lane depositor. Type-IS 800. Serial no. 3505. Date of manufacture – 2003). 1 x Baker Perkins travelling oven with 15m long x 1580mm wide belt. All equipment to be removed from the factory by the Buyer.