Used Aluminum Furnace for sale (7,109)

Condition: used, Laboratory muffle furnace Additional title: High temperature oven Nominal temperature: 1000 °C Current: 14 A Voltage: 220 V Frequency: 50 Hz Features: Stainless steel housing, temperature display, rotary knobs Itodpjzgcyksfx An Hjk

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - tub capacity: 4.4t - tiltable furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode I - pouring efficiency 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average tub lifespan: 4 – 6 months - furnace equipped with an additional device used to modify liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including bottom-pour stopper - Third group – inductor with power 120 kW, voltage 380 V 50Hz, whose main function is to heat the liquid metal. The inductor is continuously air-cooled during operation. - Fourth group – switchboard with built-in transformer, contactors, and control station. POURING PROCESS The pouring process proceeds as follows: The DISAMATIC 2032 A positions the molds on the conveyor in the correct orientation. The correct position ensures that the open pouring basin in the mold is aligned with the bottom-pour stopper on the bottom of the tub. When the desired position is reached, the operator manually lifts the bottom-pour stopper (using a lever) to fill the mold until the liquid metal is visible in the overflow. The pouring speed of the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer fire-brick lining, where one layer is permanent and the other is expendable. The permanent lining consists of an insulating layer, which is lightweight, burnt stone, and a sillimanite layer. The expendable layer consists of corundum material, i.e., concrete with a high clay content (94%). Both parts are connected by a special cement. The tub inductor is located within a lining made of Al₂O₃ or MgO and SiO₂, depending on the needs. The material used for the bottom-pour stopper is chamotte with varying clay content. The inductor is attached to the pouring furnace with screws and a sealing compound that has adequate plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. tub: approx. 4 – 6 months 2. inductor: approx. 12 weeks Ceramics lifespan depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts do not have direct contact with the liquid metal. Itedpfxozfyu Aj An Hsk PRICE *49,000 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are the responsibility of the Buyer; the price includes the following additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, fully refurbished, 12-month warranty, available for immediate delivery - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating Itsdstbq Eqepfx An Hsk - Supply and exhaust air with electrically actuated dampers (driven by Belimo actuators) - Supply air fan with frequency converter, controlled via regulator - Stainless steel exhaust hood - Bentrup 507 control system with thyristor control - Note: Controller language is German only; switching to other languages is not possible! - Additional drag element Type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current rating: 26 amperes - Supply voltage: 3/N/PE 400VAC - Connection type: prepared for fixed connection, 32 A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing furnace, tempering furnace, laboratory furnace, hardening furnace, ceramic furnace

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Glass tempering furnace - Maximum glass size: 2800 x 6000 mm - Glass thickness: 3 - 19 mm - Blower system for tempering down to 3.8 mm acc. to EN 12150 and ANSI Z97.1 Itedpfx Aszgfzkjn Hek - BOOST315 OPTIMIZED Boost unit for tempering down to 3.15 mm acc. to EN 12150 and ANSI Z97.1 with optimized capacity and loading area HS12 + INA 2860 - Heat strengthening system up to 12 mm acc. to EN 1863 including Low-E glass and ASTM 1048 heat strengthening up to 12 mm. - Includes independent quench nozzle height adjustment (INA) - N85 2860 Noise reduction cabin around the chiller LpA = 85 dB(A) - iLooK integrated - 28xx Integrated Online Glass Quality Measuring System control - V for FC/RC Series Additional process screen to unloading table - Cullet conveyor - Cam option (cameras & screens) - Excellent condition, very little used, fully serviced! - Available immediately

Condition: good (used), Wire electrode, welding wire, welding wire, flux-cored wire -Welding wire: flux-cored wire, drum with unwinding device Itjdozcv Rpepfx An Hek -Wire: Aluminum Ø 2.4 mm -Roller: Ø630 x 460 mm -Transport dimensions: 680/640/H690 mm -Weight: 238 kg

Condition: excellent (used), Year of construction: 2016, Sell Aluminum Porta Gantry 250KG mobile gantry winch, 2016r in bdb condition. Itsdpfovcdciex An Hek

Year of construction: 1992, condition: used, max. temperature 1100 Grad Itjdpfxow Rrf Ss An Hok size of opening ca. 250 x 120 mm depth of chamber ca. 290 / 310 mm heating capacity 2,7 kW control "Thermocomputer TC 5040"

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Itedpfxeuhmaco An Hsk Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: used, Furnace, Chamber Furnace, Heat Treatment Furnace, Hardening Furnace, NABERTHERM Professional Industrial Chamber Furnace – 1150°C, Used Machine Manufacturer Nabertherm (Made in West Germany) Model N81 Itodpfxozc Ihas An Hsk Serial Number 72019 Year of Manufacture 1988 Item Number 7082 Technical Specifications Maximum Temperature: 1150°C Power Rating: 18 kW Operating Voltage: 380 V, 3N~ (Three-phase industrial power supply, 50 Hz) Current Consumption: 27 A Furnace Door Opening: 500 × 250 mm Overall Dimensions Width: 1200 mm Depth: 1800 mm Height: 1750 mm

Condition: used, Working length: 4060mm The traveling trolley size: 650x1700mm Itsdpfeyyhqdex An Hsk

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,480 mm, loading space height: 2,303 mm, Year of construction: 2026, Equipment: ABS, Brand new D-Tec Flexliner Aluminium Tipper 57m³ with 3 Axles D-TEC Flexliner FL-3-S Aluminium * 3 axles * SAF axles * Disc brakes * Air suspension * Automatic lift axle * Wabco EBS * 57 m³ capacity * Aluminium load body * 7 mm wear-resistant aluminium floor * Internal dimensions approx. 10,300 x 2,480 x 2,303 mm * Tipping angle approx. 45–46° * Black sliding tarpaulin * Pneumatically locked combination rear door Itjdpey Nuqiofx An Hek * 2 rear slides * LED lighting * LED work lamps * Toolbox * Load pressure gauge * Tyre pressure monitoring system (TPMS) * Broom/shovel holder * Access ladder * Steel rims * Tyres 385/65 R22.5 * Body colour: RAL 7001 silver grey * Frame RAL 7016 anthracite grey * Available at short notice * Errors and prior sale excepted We are always at your disposal for any questions.

Year of construction: 1998, condition: used, Longitudinal cutting saw for cutting aluminum profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Push length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request Iedpfx Aswx I Hvjn Hstk

Condition: used, Year of construction: 1998, power: 40 kW (54.38 HP), input voltage: 400 V, input current: 58 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 1,200 mm, inner dimension width: 1,000 mm, inner dimension height: 800 mm, Electrically heated Nabertherm N 825 / AS furnace with draw-out door. Maximum temperature: 750 °C Isdpfjzb Dqzsx An Hetk Power: 40 kW Internal dimensions: 1000 x 1200 x 800 mm (width x depth x height) Program controller: Jumo Imago 500 with recording function & program controller.

Condition: used, functionality: fully functional, T36E bulb blowing machine with furnace Olivotto Industries is the leader company in the production of blow machines. The T36E electronic blowing machine, faturing blowing machine featuring complete electronic process control is the natural evolution of the mechanical T series and it has been developed mainly for the productionof lighting bulbs in sodalime glass. In addition, the machine can be used for the production of small articles both in sodalime and borosilicate glass. The T36E is equipped with 36 blowing heads and can operate either with 36 or 18 working heads. Itsdpfxozgbd Uo An Hsk

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1787, functionality: fully functional, temperature: 1,150 °C, total length: 23,700 mm, conveyor belt width: 620 mm, heating capacity: 320 kW (435.08 HP), pass-through height: 100 mm, The system has seen very little use and is in excellent condition. TECHNICAL DETAILS Maximum operating temperature: 1150°C Belt width: 620 mm Installed heating capacity: 320 kW in 8 zones Fuel: Natural gas Operation: Hydrogen + Nitrogen (N2 + H2) integrated Usable height: 100 mm Dimensions Infeed table length: 2 m Burn-off zone LED3 length: 1.5 m Sintering zone length: 7.5 m Rapid cooling zone length: 1 m Convective cooling zone length: 2 x 4 m Flame-free outlet with air shower length: 2 m Outlet table length: 2.7 m Total system length: 23.7 m Total system width: 2.3 m MACHINE DETAILS Natural gas consumption: 25 m³/h (80 mbar) N2 consumption: 45-65 m³/h (max. 80 mbar) H2 consumption: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temperature) EQUIPMENT Flame-free outlet Ceramic muffle Dual thermocouples Ijdszclphspfx An Hotk Programmable Online diagnostic system Low NOx RS recuperative burners SiSiC burner tubes LED 3 de-waxing zone (utilizes the chemically bound energy of waxes and improves burn-off conditions, especially for heavy powder metallurgy parts (>0.9 kg)) "Target-Actual value belt speed comparison" function

Condition: new, Year of construction: 2023, BERG+SCHMID Aluminum Circular Saw Model VELOX 350 Manual Speed: 1800+3,600 rpm - Mitre left + right 45° - Head bevel cuts up to 45° (Schifter) - Ball bearing rotary table - Machine base - Highest cutting quality due to vibration absorption - Very smooth running cut - Pull-through start and high performance - Machine base with chip drawer Saw blade dimensions: 350x32mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Itjdpfxor Ilkto An Hjk Delivery time: ex stock Waiblingen Beinstein

Condition: used, Year of construction: 2003, machine/vehicle number: 3945, functionality: fully functional, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones Isdoyn Rgvspfx An Hstk strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm Cutting area up to 80x200 mm Stroke length: max. 800 mm with digital display Saw blade RPM: 2,000 - 3,800 rpm. Piece counter with automatic shut-off when the target value is reached Continuously adjustable pneumatic material feed Iedpfxexn Iq Do An Hstk Hydro-pneumatic saw feed Pneumatic material clamps Spray device Including user manual Machine dimensions: 2100 x 1100 x 1500 mm (W x D x H) 1000 kg

Condition: refurbished (used), functionality: fully functional, Batch furnace on trolley Manufacturer: Av Eujc Year of manufacture: 2007 Technical data: Batch weight: max. 15 t Usable dimensions: 3300 x 2200 x 1600 mm (L x W x H) Operating temperature: max. 950 °C Temperature uniformity: +/- 10 °C at the end of the holding time 6 pulse burners "System Löcher" on the furnace door of the trolley including: Isdpfx Asza S Ewon Hotk Control cabinet and gas control system Turnkey, including installation, excluding freight

Year of construction: 2009, condition: used, The machine is powered and can be inspected by appointment! Technical data / machine components: Year of manufacture: 12/2009 Manufacturer: PRESSTA-EISELE Voltage: 400 V Rated current: 19.2 A Operating pressure: 250 bar Dimensions: approx. 18-20 m long, approx. 3 m wide Weight, unpacked: 4.5 to 5 tons Horizontal loading magazine: 5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side 17 compartments, 90 mm wide, for holding the profiles, with a pusher 40 x 10 mm (H x W) 2 sliding supports between the toothed belts as additional support Depth, max: 2,380 mm, length: 7,400 mm Loading weight, max: 1,000 kg Conveyor length: 1,850 mm Profile length, min: 1,000 mm Profile length, max: 7,300 mm Common drive via geared motor: 0.55 kW, 400 V, 50 Hz Conveyor speed: 4 m/min Material stop on the left Magazine "empty" sensor, manual cycling Tactile switch for the first loading 5 pneumatic cylinders for aligning the profiles in the longitudinal direction 6 lifting rollers for lifting the profile from the loading magazine and transferring it to the pusher Pusher, electronically positionable feed system: Reinforced design Feed length, max: 9,000 mm Mounted on the right side of the machine Profile feed from right to left Guide profile with linear guide rail Carriage: plate construction with ball bearing carriage Drive via linear motor, positioning via magnetic strip Pneumatic material gripper All 8 profiles can be automatically clamped without adjustment Repeat accuracy: +/- 0.15 mm Rapid traverse speed, max: 180 m/min Input of the profile tube length into the control system 1 light barrier for detecting the beginning of the profile before the first punching head Punching unit: Drive: hydraulic Punching force per cylinder: 3.0 t, designed for 55 punching cycles per minute Only a maximum of 2 tools can be in operation Vertical punching head with 2 cylinders Punching stroke: 15 mm including 2 punching tools for hole ø 6.5 mm, spacing 65 mm Punching cylinders can be selected individually, guide for the profile 2 horizontal punching heads Punching stroke: 15 mm including 1 punching tool each for hole ø 6.5 mm and 1 punching tool for oblong hole 7 x 12 mm, guide for the profile Cycling lubrication system with 4 nozzles for lubricating the punches 3 l oil tank, level monitoring Saw: Drive: 5.5 kW, 400 V, 50 Hz Saw blade: ø 500 mm Saw feed: pneumatic with hydraulic control, from below Pneumatic profile clamping device: vertical and horizontal Iodpfxszbac Te An Hstk Cycling lubrication system with one nozzle Flap after the saw for removing cut-off pieces and scrap, max. 200 mm length Parts fall downwards into the provided box Longer scrap pieces are disposed of with good parts Needle marking system: Character size: 2 – 7 mm Marking window: 80 x 20 mm, 15 characters including spaces Marking always approx. 190 mm after the saw cut Data transfer from an Excel file via interface Each profile can have a different designation

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Ijdpfxjy Uuwmj An Hjtk Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Iedpfx Aey Uuu Esn Hstk Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated continuous furnace system, make Safed Itodjy Ur Aaepfx An Hek consisting of: Magnetic feeder Hardening furnace Type: T 80/54 Ti Throughput: 540 kg/h Temperature: max. 950°C Conveyor belt: effective width 600 mm Effective height: 100 mm Heating power: 229 kW Heating length: 7.200 mm Temperature control zones: 9 Processing time: 15 - 150 minutes Gases used: nitrogen, methanol, ammonia, propane Oil quenching bath Liquid capacity: 4000 l Bath temperature: max. 80°C Washing system Annealing furnace

Year of construction: 2007, condition: used, functionality: fully functional, Assembly robot for corner brackets for aluminum profiles 5 operations Isdszd Rn Rspfx An Hstk Condition: good

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 830397, functionality: fully functional, power: 85 kW (115.57 HP), temperature: 1,000 °C, inner dimension length: 1,600 mm, inner dimension width: 700 mm, inner dimension height: 950 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in a large German corporation, adhering to applicable guidelines and maintenance recommendations. Iedpjy Uxt Eofx An Hstk ACQUISITION COSTS Original purchase price in 2008: €490,000 plus VAT Retrofit in 2022: €254,000 plus VAT TECHNICAL DETAILS Dimensions of the heat treatment unit Housing width, including control cabinet: 3,600 mm Overall length with attachments: 7,000 mm Height above furnace floor: 4,900 mm Loading height above furnace floor: 1,200 mm Pit depth: 630 mm Internal height of the furnace chamber: 950 mm Internal depth of the furnace chamber: 1,600 mm Internal width of the furnace chamber: 700 mm Temperatures Rated furnace temperature: 1,000 °C Operating furnace temperature: 850 °C Oil bath temperature: 60 °C Dimensions of the furnace control cabinet Width: 2,000 mm Depth: 600 mm Height with 100 mm base: 2,100 mm Weights and Volumes Weight of multi-purpose chamber furnace: 22,000 kg Oil bath volume: 7.5 m³ Weight of switchgear: 600 kg Total weight of furnace with oil and charge: 30,000 kg Energy Data Total connected load: 85 kVA Supply voltage: 400 V Supply frequency: 50 Hz Number of phases: 3 Oil bath heating: 2 x 21.6 kW Motor power, heating chamber circulation fan: 5.5 kW Motor power, pre-chamber circulation fan: 2.2 kW Motor power, oil bath air cooler: 3.0 kW Motor power, lifting table: 11 kW Motor power, loading machine: max. 38 kW Current draw, pre-chamber door: max. 17.2 A Current draw, heating chamber door: max. 13.2 A Motor power, combustion air fan: 1.5 kW Motor power, oil bath pump for oil bath: 2.2 kW Motor power, cooling air blower: 0.75 kW Motor power, oil bath circulation fan: 2 x max. 11 kW Motor power, oil bath pump for cooling plates: 1.1 kW Motor power, batch oil circulation pump: 3 kW Batch dimensions with base grate Height: 950 mm Width: 700 mm Length: 1,600 mm Weight: 1,000 kg Note: The dismantling and loading of the furnace must be organized by the buyer.