Used Alup Allegro 76 for sale (1,533)

Year of construction: 2009, condition: new, Belt dimensions: 2000x100 mm Nodpfx Abjx Davezocw Belt speed: 30 m/s Angle adjustable from 30 to 90° Power: 3 kW, 4000 V, 50 Hz Weight: 200 kg Rollers for grinding reamers: 3/4"; 1/2"; 1"; 1 1/4"

Condition: new, number of rollers: 3, roller (bottom) diameter: 76 mm, roller (top) diameter: 76 mm, side roll diameter: 76 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity: 1270 x 1.5 mm - Conical rollers - Removable top roller Nodpsh Ralqofx Abzecw - Foot control - Emergency stop - Documentation - 400V

Condition: good (used), 2 pieces of frame stands. Oscillating shaft and overhung shaft. 2 pieces of split lower frame rollers. Shafts and bearings for rollers. Nodpfswwr Eajx Abzscw Guide bracket, etc.

Condition: good (used), Year of construction: 1990, pressure ca.10 t throat anpassbar mm stroke 250 mm Njdpfxeul Eaws Abzscw table surface area 220 x 220 mm mm material diameter max. ca. Ø 267 mm total power requirement 1,5 kW weight of the machine ca. 430 kg dimensions of the machine ca. 899 x 772 x 1520 m

Condition: good (used), Year of construction: 1982, machine/vehicle number: 5261028, Paper cutting machine Polar 76 EM, year of manufacture 1982, program control, air table, 1 spare blade, in good condition, available immediately If you are interested, we will be happy to inform you about other machines in our company. Nsdorg D Ixepfx Abzjcw You are welcome to view the machine at our premises by prior appointment.

Condition: ready for operation (used), Size with continuous feeder: max 760x2000 mm Ncjdpfxed N D Nie Abzow min 150x180 mm Size cross fold: min 150x200 mm Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately

Condition: used, This listing is for a Pall Allegro 1/2" Single Use TFF System. The unit is in full working condition and is ready for immediate release. This Unit is fitted with a Ismatec Flowmaster FMT 300 peristaltic pump. This unit is supplied with Trolley and containers. The Pall Allegro 1/2" Single Use TFF System is a cutting-edge solution designed specifically for tangential flow filtration (TFF) in bioprocessing applications, combining innovative single-use technology with user-friendly design. Unlike traditional TFF systems, the Allegro system incorporates new concepts that enhance ease of use and efficiency, featuring a carefully considered layout that allows full access to components from one side. Key Features: Single-Use Design: Eliminates cross-contamination and cleaning requirements, enhancing system flexibility and ensuring a sterile environment. Integrated Sensors: Equipped with single-use sensors that track key process parameters, provide notifications for out-of-spec conditions, and enable automated control for optimal processing. Easy Setup: Comes with five pre-irradiated manifold sets (feed, retentate, permeate, bio container, recovery) that are ready for installation, typically taking just 20 minutes. Automated Operation: Fully automated for monitoring and controlling critical parameters, ensuring consistent performance throughout ultrafiltration and diafiltration processes. Njdpfx Ajxxyfzjbzscw Technical Specifications: Capacity: Features a recirculation pump with a capacity of 1,000 L/hour, designed to accommodate 0.5 - 2.5 m² cassettes running at a crossflow of 5 L/min/m². Versatile Connections: Easily connects to Allegro 2D and 3D bio containers for WFI, diafiltration buffer, and process fluid in fed batch operations. Temperature Control: Includes a heat exchange plate under the retentate bio container to manage product temperature, either cooling or heating as needed. Applications: Ideal for concentration and diafiltration of proteins, recombinant molecules, potent biological drugs, cytotoxic drugs, and vaccines, the Pall Allegro system stands out as a reliable and efficient choice for modern bioprocessing needs.

Condition: used, This listing is for a Pall Allegro 50 L Standard Mixer and Weigh Platform. The unit is in full working condition and is ready for immediate release. The Pall Allegro 50 L Standard Mixer and Weigh Platform is a robust and versatile solution designed for single-use bioprocessing applications in the pharmaceutical and biotechnology industries. Engineered for consistent mixing performance, this system supports critical upstream and downstream operations including buffer preparation, media mixing, and formulation processes. This platform integrates high-precision weighing functionality with a reliable mixing system, offering enhanced process control in a compact, easy-to-clean stainless steel frame. Its compatibility with Pall Allegro single-use mixers ensures operational flexibility and sterility assurance across various applications. Key Features Integrated Design – Combines mixing and weighing in one streamlined system. Single-Use Compatible – Fully compatible with Pall Allegro 2D mixer bags. High Accuracy Weighing – Precision load cells for reliable mass control and batch documentation. User-Friendly Interface – Easy-to-use control panel with adjustable speed and mixing profiles. Ncodpfx Aexl Dpdjbzjw Hygienic Construction – Stainless steel frame with smooth surfaces for GMP compliance. Scalable Solution – Ideal for pilot-scale to small-scale commercial production. Technical Specifications Model: Allegro 50 L Standard Mixer & Weigh Platform Mixing Volume: Up to 50 liters Mixer Type: Magnetically driven impeller Platform Material: 304 Stainless Steel Weight Capacity: Up to 100 kg Dimensions (approx.): 600 mm x 600 mm x 1100 mm Power Supply: 100–240 V AC / 50–60 Hz Control System: Integrated touch screen interface Manufacturer: Pall Corporation Applications Biopharmaceutical Manufacturing – Media and buffer prep, formulation, and hold steps. Clinical Manufacturing – Flexible use in small-scale GMP operations. Vaccine Production – Sterile formulation and component mixing. Gene & Cell Therapy – Supports sterile, closed-system processing. Process Development Labs – Ideal for scaling up single-use technologies. Benefits Sterile Processing – Supports single-use bags to minimize contamination risk. Compact Footprint – Fits easily into lab and production environments. Accurate Dosing – Integrated weigh system for precise process control. Reduced Cleaning Time – No need for CIP/SIP due to disposable mixer bags. Pall Quality – Developed by a trusted leader in bioprocessing technologies.

Condition: used, This listing is for a Pall Allegro 200 L Single‑Use Mixer System. The unit is in full working condition and is ready for immediate release. The Pall Allegro 200 L single‑use mixer (model LGRMXTTE200L230B) is engineered for scalable, robust mixing in biopharmaceutical operations. It is part of Pall’s Allegro single‑use technology portfolio and is designed for applications from media and buffer preparation through final formulation. Built with proven engineering principles and compatibility with Pall’s Allegro biocontainer film formats, it offers ease-of-use, reproducible performance, and minimal validation burden. Njdpsxl Dxljfx Abzscw Key Features 4‑Pitch Blade Impeller – Effective, low-shear mixing over a broad range of conditions. Bidirectional Flow Capability – Able to run clockwise (up‑flow) or counterclockwise (down‑flow), accommodating different density fluids and solids. Bag Inflation System – Mixer bag inflation provides a controlled mixing envelope, allowing consistent performance across 50–200 L volumes, and supports gas blanketing. Flush Drain Valve – Helps avoid dead legs by removing settled materials that might otherwise be left unagitated. Retention of Allegro Film Materials – Uses the same film as standard Allegro 2D/3D biocontainers for material consistency, reducing requalification effort. Optional Baffle Kit – To mitigate air entrapment at higher rotational speeds for shear-sensitive processes. Technical Specifications Parameter Value Model / Part Number LGRMXTTE200L230B Operating Volume Range 50 – 200 L Voltage / Frequency 230 V AC, 50 Hz Current Draw ~5.1 A Motor Power 0.37 kW Rotation Speed Range 50 – 200 rpm Materials of Construction Mixer tote in 304 stainless steel; film, manifolds, ports in LDPE / PS / silicone etc. Weight (empty system) ~120 kg Footprint (W × D) 1,054 mm × 748 mm Height 1,378 mm Gas Supply Requirements 4 – 6 barg (for bag inflation / blanket) Operating Temperature Range 4 – 40 °C Connections / Ports Inlet, gas inflation, exhaust, flush drain, powder addition ports etc. Applications Upstream Media Preparation – Efficient mixing of culture media and supplements. Downstream Buffer Preparation – Rapid homogenization of buffers or reagents. Final Formulation / Filling – Gentle mixing for drug products. Powder Addition / Reconstitution – Capable of handling solid-liquid mixing (e.g. powders) with repeatability. Shear-Sensitive Biologics – Low shear impeller design suitable for sensitive proteins or biologics. Benefits & Validation High Performance Mixing across Conditions – Demonstrated capability to mix a wide range of systems including liquid-liquid, solid-liquid, and viscous solutions with good speed and uniformity. Validated Materials & Safety – Components meet USP /, USP , , endotoxin limits, gamma-irradiation compatibility (up to 50 kGy), and leak-tested containers. Reduced Validation Overhead – Using the same film materials as existing Allegro biocontainers helps streamline requalification and process transfer. Minimal Dead Volume / Entrapment – Flush drain valve and optional baffles help prevent accumulation of settled solids. Scalable & Flexible – Supports operations from 50 L to 200 L with consistent mixing performance.

Condition: new, - Capacity: 700 x 2 mm - Conical rollers - Removable top roller - Foot control - Emergency stop - Documentation - 400V Nodpfx Ajihv Hpebzscw

Condition: new, – Capacity: 1070 x 2 mm – Conical rollers – Removable top roller – Foot control Ncedpfxjhc Uvme Abzew – Emergency stop – Documentation – 400V

Condition: new, Year of construction: 2025, tube diameter 20 - 76 mm grinding band dimension 100 x 2000 mm 0 2905 U/min Ncjdpfx Aeyv Nvysbzow band speed 30 m/sec 0 3 kW voltage 400 V weight 200 kg

Condition: used, Complete entry line, made by OTO MILLS - Double Decoiler with bottom/top hold-down roll - Strip peeler & Pinch-roll - Automatic strip joiner - Extra-sized horizontal accumulator Scope of supply includes: Double Uncoiler AD508SD - Double hydraulic expansible mandrel - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Pinch-Roll and flattener PRS566 - 3+2 rolls - Hydraulic roll positioning OTO Mills 100% automatic butt-welding unit GG566 - Complete automatic joining and welding process - Strip exit table with encoder - Motorized strip exit Pinch-roll OTO Mills Horizontal Accumulator Ncsdpfx Aoymatisbzjw - Heavy Duty horizontal accumulator - Motorized Feeding Pinch-roll – 106 KW - Rotating table with Main motor 106Kw - Approx. 6,5 meter external table - Exit strip guiding Turret OTO Mills Tube diameter: 76,1 - 168,3 mm Material thickness: 2 - 6.3 mm Double Uncoiler: AD508SD Pinch-Roll and flattener: PRS566 100% automatic butt-welding unit: GG566 Accumulator: Heavy Duty horizontal accumulator

Condition: used, HF Tube mill LT76, made by OLMA (ITALY) and TLM (SPAIN) Manufacturers : - TUBE MILL : OLMA (Italy) / TLM (Spain) - HF WELDER : GH ELIN (Spain) - ZINC SPRAYING UNIT : METALLISATION Including tooling for : 20 / 25 / 28 / 30 / 32 / 35 / 38 / 40 / 42 / 45 / 48 / 50 / 52 / 55 / 60 / 65 / 77 mm Ncodpfxoyl Ukao Abzew & Turk heads for squares and rectangular shapes Round tube diameter: 20 - 76 mm Square tube diameter: 20×20 – 60×60 mm Rectangular tube diameter: 20×10 – 100×20 mm Tube thickness: 0,9 - 2,5 mm Tube length: 4 - 8 m Speed: Up to 40 m/min

Condition: ready for operation (used), Year of construction: 1994, machine/vehicle number: 9314, functionality: fully functional, controller model: Beckhoff mit Addison DataBend, wall thickness: 3 mm, working length: 6,000 mm, workpiece diameter (max.): 76 mm, Equipment: CE marking, TECHNICAL DETAILS Max. diameter: 76 mm Max. wall thickness: 3 mm Max. bending length: 6,000 mm MACHINE DETAILS Control: Beckhoff with Addison DataBend Dimensions & Weight Ncsdpfox Rbf Njx Abzjw Dimensions (L x W x H): 8,000 mm x 2,000 mm x 2,000 mm Transport weight: 6,100 kg Transport packages: 1 EQUIPMENT incl. several mandrels and bending formers Documentation CE marking

Condition: reconditioned (used), Year of construction: 1987, Circular saw feed unit PANHANS Type 76 3 drive rollers (new) Nedpjyg Erwsfx Abzscw Roller diameter: 110 mm Front roller width: 50 mm Middle roller width: 20 mm Rear roller width: 50 mm Axle spacing: 200 mm Feed speed: 13 + 26 m/min Drive power: 0.14 kW Max. workpiece height: 80 mm Min. workpiece length: 200 mm Extraction nozzle: 80 mm

Condition: new, sheet width 1070 mm plate thickness 2,0 mm distance between columns 1100 mm diameter of upper rolls 76 mm total power requirement Handbetrieben weight of the machine ca. 0,22 t dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. Nedpfxjfv A Epo Abzecw - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate

Condition: new, width of the strips 100 mm band length 2000 mm band speed m/sec Nsdpet Eaf Usfx Abzjcw tube diameter 16,5 - 76 mm angle adjustable from - to 0 - 65 Grad connected load frequency 400 V total power requirement 2,2 kW weight of the machine ca. 0,17 t dimensions of the machine ca. 1,3 x 0,7 x 1,1 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V Nodpfx Ajupw Rijbzjcw total power requirement 2,5 /3,3 kW weight of the machine ca. 0,19 t dimensions of the machine ca. 1,2 x 0,75 x 0,7 m

Condition: excellent (used), Year of construction: 2019, Conveyor belt Arburg (76) length 2,37m , belt width 25cm, year 2019 Nodpfxjv I S Tte Abzjcw

Condition: used, Year of construction: 1984,

Year of construction: 2008, condition: used, Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following machines: – Double dec.machine – Strips ends manually welding machine – Horizontal accumulator – 10 stations forming machine Material thickness is adjusting not manually – it is done by el.motors depend of el.indicators e. Welding aggregate is Thermomachine / Italy f. Cooling system g. System for automatic control of tubes sections dimensions h. 4 calibration stations + 4 TH The TH are with mechanical movements depend of necessary calibration. i. Fly cut-off unit is with two geared motors : one for hot cut off and another for cold cut off j. Automatic stacker is MAIR . Max tubes length is 12m. Packets for round tubes are hexagonal or octagonal types and for square tubes square or rectangular depend of tube’s dimensions. Tools available with machine: – Round Tube Ø76,1 – 1 set Ø88,9 – 1 set Ø95 – 1 set Ø101,6 -1set Ø108-1set Ø114,3-1set Ø125 – 1 set Ø133-1set Ø150-1set Ø159-1set Ø188-1set – Rectangular tube 60×60 70×70 75×75 80×80 85×85 Nodpfx Aboi D D Efezocw 90×90 100×100 105×105 120×129 125×125 150×150

Condition: used, Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 8945646465, total width: 2,000 mm, total length: 12,000 mm, total height: 1,800 mm, overall weight: 3,500 kg, air demand: 1 m³/h, ASAP Digital textile printing machine, pigments inks, GOTS and Oekotex 100, class baby articles, printing width 1.80m Technical specifications - Ink type: Kornit NeoPigment™ Intenso, water-based - Color channels: 7 (CMYK + Red, Green, Grey) - Pre-treatment: integrated 8th channel - Print heads: 64x Spectra Polaris (recirculating) - Print width: up to 180 cm - Print speed: up to 200 m²/h Nedow Tynmepfx Abzscw - Print resolution: 400–1200 dpi (recommended 600 x 600 dpi, 6-pass, interlaced) - Ink capacity: 4 liters per color - Weight: approx. 3,500 kg - Power supply: 3-phase, 25 kW, 110/220 V, 50/60 Hz

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Belt Grinder for Pipe and Profile Ends Demonstration machine, as new Year of manufacture: 2008 Robust belt grinding machine for pipe and profile ends on a stable base frame with a large drive motor for professional metal processing. Description – ideally suited for finishing pipes and profiles – for diameters from 20 to 76 mm – grinding angles from 30° to 90° – high belt speed of 30 m/sec – powerful motors – vibration-free operation for optimal results Technical Data Motor power: 3 kW Grinding range: Ø 20–76 mm Belt dimensions: 100 x 2000 mm Guide piece adjustable from 30° to 90° Nsdpsydpkxefx Abzscw Speed: 2905 rpm Belt speed: 30 m/sec Dimensions: 1300 x 640 x 440 mm Weight: 168 kg Accessories (optional) Roller set (radius rollers) for pipe and profile end grinder, ø 20 – 26 – 32 – 42 – 48 – 60 – 76 mm

Condition: new, sheet width 700 mm plate thickness 2,0 mm distance between columns 750 mm diameter of upper rolls 76 mm total power requirement ß,75 KW weight of the machine ca. 0,29 t dimensions of the machine ca. 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate Nedpfx Aborrkdkjzecw