Used Amtec Ml3-60 for sale (22,069)

Condition: used, Year of construction: 2008, machine/vehicle number: 3079241-0010, functionality: fully functional, power: 175 kW (237.93 HP), input voltage: 400 V, input current: 253 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,100 °C, overall weight: 21,000 kg, number of chambers: 2, control type: PLC-controlled, Aichelin VKEs 3-60/65/110 Multi-chamber furnace Connected load: 175 kW Max. temperature: 1100°C Max. load: 650 kg Iedpfx Asx Tup Hei Rotk Total weight: 21 t Furnace atmosphere: N2, methanol, NH3, air, natural gas, propane With loading table

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure Itodozvdm Rspfx Ai Rjk GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on the thicknesser 250mm - max. thickness of workpiece on the side heads (3-sided) 110mm – from above: - ejectors - toothed infeed shaft - pressure pad - planing shaft - pressure pad - smooth outfeed shaft - pressure pad at the output – from below: - guide strip - adjustable rollers in the lower bed, 2 pcs – from the rear: - side spindles + pressure pad, 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW Isdpezu Sgpefx Ai Rotk - main motor 7.5kW - 3 feed speed settings - electric bed lifting - dust extraction port 2x110mm - overall dimensions (L/W/H) 1650x1500x1210mm - weight 1370kg ADVANTAGES – Polish production – shaft for 4 knives – used planer, very good condition Net price: 23,900 PLN Net price: 5,690 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Itsdjxg Igiepfx Ai Rsk

Condition: like new (used), Year of construction: 2022, machine/vehicle number: P 710, functionality: fully functional, power: 5.5 kW (7.48 HP), oil tank capacity: 120 l, overall weight: 6,500 kg, control type: CNC control, Machine is in as-new condition. The High Quality Press Brake (HQPB) represents the top model of the Placke range of press brakes. The entire manufacturing process, from hydraulic cylinders to control cabinet assembly, is performed in-house. By combining state-of-the-art technology with many years of expertise in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration provides a fully functional press brake. This package of safety, reliability and efficiency, together with user-friendly operation, allows us to meet the highest demands and tolerances in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side supports with 2 pressure pipes and an overhead oil tank, welded - Above-floor design - Coating (2-component structured lacquer), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relief annealed - Depth of stroke measurement, reading head guided by ball bearing rails - Separate Y1 and Y2 control, electronic monitoring of parallelism Hydraulic System: - Hydraulic proportional control valve with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Maximum load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping strip, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Mechanical crowning compensation is structurally unnecessary. - Single V-die holder (13x20) - Working height: 1050 mm (with 55 mm die height) Front Side of Machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are adjustable via ball guides and height-adjustable from 55 mm to 100 mm die height using a slotted adjustment. The ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis control”: - X and R axes CNC-controlled - Z-axis manual Delem DA 66 Touch control panel on swivel arm. Safety devices in accordance with CE standard Iedpfx Aijyvzkie Rstk Technical Data and Working Range: Press force: 600 kN Working length: 1550 mm Distance between frames: 1200 mm Installation height: 400 mm Throat depth: 255 mm Ram stroke: 215 mm Ram Speeds: Rapid approach max. 280 mm/s Press speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electronically limited to ± 5 mm Lower beam height above floor: 947 mm Motor power: 5.5 kW Main dimensions: Below-floor depth: 0 mm Pit depth for side frames: 0 mm Machine weight: approx. 6.5 t Tank capacity (hydraulic oil): 120 l (Specifications subject to change) Rear machine lighting: Work area illumination via LED light strip in the area between the side frames.

Year of construction: 2013, condition: used, 🥕 Sormac KP-60 Knife Peeler for Carrots For sale: Professional Sormac KP-60 knife peeler for carrots and root vegetables. Iodpoy Hdb Eefx Ai Rotk Industrial machine – very precise peeling, minimal raw material losses. ✔ good condition, fully operational ✔ stainless steel ✔ 230/400 V power supply ✔ ready for work Price: 58,000 PLN net Location: Szczecin

Condition: used, functionality: fully functional, Year of construction: 1995, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Tauring, controller model: CNC3A, number of rollers: 8, pipe diameter (max.): 60 mm, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, Tube & profiles bending machine ,Tauring Slalom 60-3A 8 rollers for left and right hand bending sense Operation in manual and automatic programmable axis with digital screen readout Ijdpfx Ajzi Ew Rji Rjtk One-pass bending programmable in different planes manipulator programmable “tube turner” 12 mtrs length tube feeder Complete with several set of rolls for tube from 14 to 60 mm - 8 pcs each set = total 140 rolls. Power rotation 3 kw voltage Vac 400/50 power hydraulic bending 2,2 Kw

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 400 V, Used Spiral Mixer S-Super FAB 60 - Approx. 60 kg dough, 37 kg flour - Year of manufacture: 2005 - 2-speed, 2 timers, manual/automatic mode - Bowl rotation clockwise/counterclockwise - Flour dust cover - Mobile - Painted version (grey) - Spiral motor power: 2.1/3.7 kW, bowl: 0.55 kW, 400 V Includes operating manual, fully functional, cleaned and technically inspected All prices are subject to VAT, ex works Syke. Available at short notice (shipping possible at buyer’s expense) Advance payment required with order. All sales are subject exclusively to our General Terms and Conditions. Isdpoy Rkqhsfx Ai Retk Sale subject to prior sale, technical modifications, and errors reserved.

Condition: used, functionality: fully functional, Year of construction: 1996, Ring bending machine, ZOPF model ZB 60 M - motor-driven - Two-roller drive - Shaft diameter 30 mm - with standard rollers - Bending capacity up to round tube 48 x 3.2 mm - Solid material up to 30 mm - Weight approx. 180 kg Itjdpfjzl Ud Eox Ai Rsk - Motor 0.75 kW, 400 V, 50 Hz, 3-phase

Condition: used, Year of construction: 2022, Manufacturer: NOMA-Nowicki Model: Typhoon KN-60 Ijdsy Th Uijpfx Ai Rjtk Year: 2022 Condition: Used Serial Number: 52022220 Stock Number: 3374 Bowl: 60 litres Bowl speed: variable speed, 2 - 15 RPM Knives: variable speed, 200 - 6000 RPM Mixing: 2 reverse mixing speeds Power: 3 x 400V, 50Hz, 21kW Dimensions: 1100 x 1600 x 1200 mm Weight: 1325 kg

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1,525 x 660 x 610mm, Itjdpfx Aozh I Eboi Rjk Table 1675 x 660mm, table load 2,000 kgs, Spindle speed 12,000 rpm, input 18Kw, Hurco Winmax 5Control, Spindle taper Din 40, 30 ATC, Coolant, Low volt light, Swarf Conveyor, spindle probe

Condition: refurbished (used), Year of construction: 1983, machine/vehicle number: 3/1406, functionality: fully functional, table width: 1,300 mm, table length: 2,500 mm, Veneer press, Joh. Langzauner & Sons Ijdpoy Twrkofx Ai Rjtk ----- Technical data ----- Pressing area: 2,550 mm x 1,300 mm, Power per heating plate: 7,200 W, Number of cylinders: 4 pcs.

Year of construction: 2025, operating hours: 600 h, condition: like new (used), functionality: fully functional, Maximum height 160 mm / 6 5/16" Maximum width 700 mm / 27-1/2" Saw shafts are fixed. Hydraulic driven, knurled feed rollers are available. The top pressure roller is hydraulically adjustable. When the full speed range of the machine is used, up to 20 meters / 65 feet of cutting can be achieved per minute. TECHNICAL SPECIFICATIONS STANDARD METRIC Iedpfx Asyvhp Soi Rotk LENGTH 10'-5" 320 CM WIDTH 7'-5" 230 CM HEIGHT 5'-2" 160 CM APPROXIMATE WEIGHT 8,600 lbs 3900 KG SAW SHAFT MOTORS 2 × 50 KW 2 X 37 KW SAW DIAMETER 11 13/16" 300 MM MINIMUM ENTRY LUMBER WIDTH MIN: 4 3/4" MIN: 120 MM MAXIMUM ENTRY LUMBER WIDTH MAX: 27 1/2" MAX: 700 MM MAXIMUM LUMBER CUTTING HEIGHT MAX: 6 1/4" MAX: 160 MM MIN. & MAX. EXIT LUMBER CUTTING WIDTH MIN: 1/2" MAX: 4 3/4" MIN: 15 MM MAX: 120 MM MIN. LUMBER LENGTH MIN: 3 FEET MIN: 90 CM MAX. FEED SPEED PER MINUTE MAX: 65 FEET / MINUTE MAX: 20 M/MIN

Condition: not inspected (used), Max dia 180 mm Max worklength 490 mm Diametre of spindle bore 60 mm Digital screen * Power needed 39 kW Long 2800 mm Wide Itedpezi Hrvsfx Ai Rok 2130 mm Height 2090 mm Weight 4500 kg ACCESORIES * Coolant pump 1,5/5 bar-125 L

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baling press Dixi 60 SLD, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Itjdpfx Aezk Aqkoi Rok Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any possible errors. The offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any guarantee or warranty.

Condition: used, Selling a used HGH 60 40 Duo shot blasting booth with a mobile aluminum profile frame. Itodozt U Uaepfx Ai Rjk Operating manual included.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 88462-85, feed length X-axis: 30,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 30,000 mm, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, total height: 2,700 mm, total width: 3,000 mm, total length: 5,000 mm, table width: 550 mm, table length: 860 mm, overall weight: 7,000 kg, workpiece weight (max.): 800 kg, controller manufacturer: RÖDERS, controller model: RMS 6 VERSION 4.20, positioning accuracy: 0.005 mm, Equipment: documentation/manual, RÖDERS RFM 760/2 HSC Milling Machine - Includes two EROWA clamping systems - Additional matching accessories - A cooling system and extraction system - Also includes a workbench with fixtures and a 3D measuring probe Note: The machine can be transported on a standard truck! Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. Iedpfjzlfa Dsx Ai Retk FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Sahindler - Scantool profile bending machine Model PV 60 NC Year 2019 - New / Demo Roll diameter : 215 mm. Capacity flat iron : 120 x 25 mm. Capacity flat iron on edge : 80 x 20 mm. Capacity angle iron: 70 x 7 mm. NC control 1 set profile bending rolls Hydraulic top roll movement Bending support Itedpfoytb U Ujx Ai Rek Footpedal

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you: Technical data: Control system: Heidenhain iTNC 530 HSCI Travel ranges: - x-axis: 600 mm - y-axis: 500 mm - z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Load capacity: 400 kg - b-axis: -5° to +110° - c-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct path measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration mandrel with tool holder - Measuring probe infrared, manufacturer Heidenhain TS 649 - Preparation for 3D quickSET - Chip conveyor - MQL, 40 bar, tank 600 l, incl. rotating viewing window, compressed air, linear measuring systems, bed flushing - Flushing gun - Mechanical oil and emulsion mist separator - Compressed air through the spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, side loading door - Electrical interface for articulated-arm robots - Pneumatic control and monitoring of the zero-point clamping system - Selection and de-selection of the handling system via a switch on the machine control panel - incl. additional flushing in the work area - incl. machine preparation for job management - incl. control panel arrangement on the left Ijdjxgnz Tjpfx Ai Rjtk - Power supply to the machine table incl. 2-channel rotary feedthrough - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 clamping circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - incl. extension of the rotary feedthrough to 4 channels Operating hours: approx. 66,600 h Spindle hours: approx. 44,800 h The ball screw drives and linear guides in the x and z axes have been renewed. Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: good (used), Year of construction: 2015, 1x Digicolor dryer, as shown in the pictures. Itjdpezlr A Sjfx Ai Rsk

Condition: like new (used), Year of construction: 2024, operating hours: 2,468 h, power: 39 kW (53.03 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, workpiece length (max.): 1,700 mm, workpiece width (max.): 800 mm, workpiece height (max.): 800 mm, workpiece weight (max.): 1,500 kg, number of slots in tool magazine: 60, total height: 3,000 mm, total length: 5,800 mm, total width: 4,300 mm, overall weight: 15,000 kg, table length: 1,700 mm, table width: 800 mm, mount diameter: 40 mm, number of spindles: 1, power of the milling unit: 39,000 W, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, space requirement width: 4,300 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, POSmill E 1600 Control system: Heidenhain iTNC 640 Travel in X: 1600 mm Travel in Y: 800 mm Travel in Z: 800 mm Table size: 1700 x 800 mm SK 40 tool holder Number of tool positions: 60 Max. spindle speed: 10,000 rpm Rapid traverse rate: 32 m/min Weight: 13.5 t Operating hours: only 2,468 h (as of August 20, 2026) Equipment: - Glass scales in all 3 axes - Hexagon 3D infrared probe system - Air through the spindle Isdpfx Aovwlp Hji Retk - Coolant system 20 bar with band filter unit - Mobile electronic handwheel - Heidenhain iTNC 640 - Tool changer with 60 positions, accessible from the front The machine is currently in our production facility and is still in use. Delivery is possible on short notice, subject to agreement. Training on the machine, transport, and commissioning are available for a separate fee. The machine has been regularly maintained and is in very good condition. Sale without accessories such as clamping devices, chip containers, workbenches, and tools.

Condition: used, Year of construction: 2004, operating hours: 55,000 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 18 mm, For sale is an injection molding machine of the brand Arburg and the type 320S 350-60 with original Arburg handling The machine is fully functional and ready for immediate use Technical Data: Year of construction: 2004 Operating hours: 55,000 h Screw Ø 18 mm Clamping force: 350 kN Core pull: 1*Hydraulic Valve gate: Pneumatic Selector switch Handling: Arburg Multilift H-side removal incl. deposit conveyor belt On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Iedpfx Aeu Hqinei Rstk Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, functionality: fully functional, Year of construction: 2005, fuel type: electric, E – Still R60 forklift – 60 / Kalmar Year of manufacture: 2005 Itodpfx Aiozt Nuzj Rjk UVV inspection valid until: 07/2027 Battery: 2021 / HAWKER 80 Volt, Type 8 PZM 1240 Battery dimensions: 1495 x 995 x 780 mm Lifting height: 3800 mm Fork length: 2.1 m Fork adjustment Side shifter Including charger 80V 170A Still ecotron XM

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, We offer the filler Veral 60, Producer Nate Chotebor. The machine is prepared for filling of the beer. Machine after general repair of all elements - filler, closer and pump. The machine is prepared for next types of bottles - 500 ,660, 750 and 1000 ml bottle. Filling capacity 20 000 bph of 500ml bottle. Isdpfxotrv E Us Ai Retk

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Itjdpjzvhz Eofx Ai Rok Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Year of manufacture: 09/2012 Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Main spindle chuck: approx. 10" Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. The machine is currently powered on and can be demonstrated in operation.