Used Annaburger Universalstreuer Hts 22H.04 for sale (5,228)

Condition: used, Year of construction: 1994, Technical details: tank capacity: 150 l operating pressure: 11 bar dimensions L x W x H: Ø 550 mm x H: 1,2m weight: ca. 60 kg Fjdpfxeu Nz Tio Akhsgf For sale as shown and described, as an unpressurised tank for a sale at low price. Condensation drain valve at the bottom with hand lever 2 connection pieces 1/2 inch 2 connection pieces on the ceiling side 2 inch with blind plugs Boiler/tank Ø 450 x 1000mm upright on tripod stand Temperature max. +50°C / min. 10°C pressure gauge *

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm Fodpfx Asy S D Nmjkhegf table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° total power requirement 30 kW weight of the machine ca. 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor

Year of construction: 2021, condition: ready for operation (used), An automatic Lorenz filter test station for the automatic testing of filter media, half masks, canister filters, and medical face masks is available. Standards: EN143/EN149/EN14683/ISO16900-3 and more, module components: flow meter/photometer upstream and downstream of the test specimen/aerosol generator/suction and extraction unit, aerosols: paraffin oil/Emery oil/DOP/DEHS, volume flow range: 8L-300L/min, min. separation efficiency measuring range: 0.0001%, min. breathing resistance measuring range: 5Pa-1000Pa, max. filter air velocity: 10.2cm/s, max. test area: 237.8cm³. The device has been used little and would not need to be serviced. Documentation available. An on-site inspection is possible. The image is an example. Fgsdoy Tx Slopfx Akhjf

Condition: used, Year of construction: 2017, operating hours: 617 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX20-14 electric forklift, year of manufacture: 2017, battery date: 08.04.2021, operating hours: only 617 h!, previous owner: German Armed Forces, rated lifting capacity: 1,400 kg, fork length: 1,200 mm, lifting height: 4,300 mm, triplex mast, hydraulic side shift, engine: 11 kW/15 hp, weight: 3,159 kg, very good condition, ready for immediate use. Fgedey Ttnnspfx Akhjf On request, we can provide you with a leasing or financing offer. Mr. Mihm (phone: ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale. Power steering, protective roof = Further Information = Lifting capacity: 1,400 kg Overall height: 210 cm Contact Tobias Ebert for more information.

Condition: used, mileage: 24,250 km, power: 103 kW (140.04 HP), first registration: 11/1995, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 04/2027, color: red, gearing type: mechanical, emission class: euro2, number of seats: 9, total length: 6,550 mm, total width: 2,440 mm, total height: 2,850 mm, Equipment: parking heater, soot filter, * Mercedes Benz 814 Double Cab with 9 seats - original 24,250 km - TÜV (roadworthy) - excellent condition * Diesel - Engine displacement: 3,972 cc - 103 kW / 140 hp - Euro 2 - Red emissions tag * 5-speed manual transmission - with integrated shelving units - Tow bar with 2,500 kg towing capacity * German vehicle - German registration document - one owner * Vehicle is immediately available and ready for collection - more pictures to follow * Please schedule an appointment for viewing * Contact: Mr. Andreas Vogel * The information provided online is a non-binding description. * They do not constitute guaranteed properties. Fgodpfey Swu Asx Akhjf * The seller is not liable for typographical or data transmission errors. * Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Fgedpfx Aexhgfmekhof Number of matching pieces:2 Length: 1200mm Width: 1500mm Height: 3500mm Weight: 7000kg

Condition: good (used), working width: 2,550 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), Guillotine Fgodpfjxdb Eyjx Akhof SAFAN - HT 255-8 MACH-ID 9237 Make: SAFAN Type: HT 255-8 Control: ARA TOUCHSCREEN Touchscreen backgauge Maximum sheet thickness: 8mm Max. cutting length: 2550mm Strokes on full length: 19mm Strokes in short 1000 length:40 Cutting angle: 0,5 - 2 Gr° Length backgauge: 0 - 1000mm Number of down holders: 17 Approach speed: 200mm/sec. Power: 15kW Length: 3400mm Width: 2300mm Height: 2150mm Weight: 8900kg

Condition: excellent (used), Year of construction: 2021, total width: 1,000 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Angles plate ASQUITH - HT-35/10 MACH-ID 9260 Make: ASQUITH Type: HT-35/10 Year: 2021 Fgjdpoxhgg Defx Akhjf Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:1 Length: 1200mm Width: 1000mm Height: 3500mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1997, Format: 0x0 Equipment: 4 head paper drills Foot control Technical data: Fedsyxqylepfx Akhsgf Number of drill heads: 4x Drill bit diameter: 3 - 14 mm Drilling distance: 1 - 420 mm Stack height: 50 mm Speed: 680 - 2,900 rpm Power specifications: Frequenz: 50 Hz Machine Voltage: 400V

Condition: used, This listing is for the Infors HT Multitron Shaker The unit is in full working condition and ready for immediate use Advanced incubator shaker designed for reliable and uniform mixing with precise temperature and humidity control. Ideal for research and biotech labs requiring consistent results in cell culture and fermentation processes. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Fgjdpfx Akjyywp Nehsf • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, ABB DCT880-W03-0160-04XA DC Drive 160A 110kW Inverter DCT880 DCT880-W03-0160-04 Fedpfx Akey Ati Rshegf Condition: New (other) The item is new, but may show signs of storage. Technical Data: Type: DCT880-W03-0160-04 (3-leg, 3-phase) Rated Current: 160A Input Voltage: 110–400V AC, 3-phase Power: approx. 110kW (at 400V) Weight: ~16kg Dimensions: approx. 370×271×270mm Note: For detailed technical data and processing instructions, we strongly recommend consulting the original datasheets or contacting the manufacturer directly. Find more items – new and used – in our shop! International shipping costs on request! PD16

Condition: new, sheet width 1600 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 140 mm lower roll diameter 140 mm side roll diameter 120 mm min. bending diameter Oberwalzen-Ø x 3 total power requirement 3 kW weight of the machine ca. 2.000 kg Overall size 3700x1300x1280 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel Fsdpsyv N E Uefx Akhsgf - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: used, Year of construction: 2004, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, Weight: 9.800 kg Price: On request - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B8820 - Drive system: CNC - Drive type: Hydraulic Fsdpfx Akeyf Hpzohsgf - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Transport dimensions: 4000mm x 2200mm x 2100mm (l x w x h) - Transport weight [kg]: 9800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 1999, Linde forklift truck H 45 D -04-600 Diesel Fgsdpfx Akeunztrehof

Condition: used, This listing is for a Shimadzu SIL-HT HPLC System Shimadzu SIL-HT Auto Sampler Shimadzu LC-10AD VP Shimadzu LC-10AD VP DGU-14A Degasser SPD-10AVP UV-VIS Detector This unit was previosuly being used with the CTO-20AC Column oven and the Applied Biosystems API 2000 It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Equipment can be serviced/renovated/refurbished on request at extra cost. Fodpfx Akoxzhn Ajhogf THIS IS ITEM DOES NOT COME WITH THE SHIMADZU CTO-20AC COLUMN OVEN

Condition: used, Hydraulic plate shear STEINER, Type HTS 30/20 R Machine No. 315 Year of manufacture 1982 Fgsdpfxed Hxx Ao Akhjf Cutting length 3050 mm Cutting thickness 20 mm Back gauge 800 mm, controlled Motor power approx. 30 kW Power connection 400 volts, 50 Hz - Back gauge with positioning control ELGO - Back gauge adjustment via ball screws - Safety light curtain SICK at the front as a guard - 3 units of material support arms with ball rollers - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very robust machine with a very stable design Space requirement of the base machine L x W x H 4650 x 2610 x 3200 mm Weight of the base machine 27000 kg Space requirement for transport (base machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Total weight 27000 kg Good condition Machine can be inspected in warehouse 37235 Hessisch Lichtenau, test cuts possible. The lower clamps are currently being re-sealed, and the corresponding price adjustment will be made in the next few days.

Condition: used, grinding length 4000 mm grinding width 1450 mm workpiece height 1250 mm column daylight 1500 mm Passage height 1420 mm table surface area 4240x1250 mm T-slot - distance 160 mm T-slot - width 28H12 mm T-slots 10 workpiece weight 20.000 kg table speed -stepless- 1-50 m/min grinding motor 22 kW turning speeds 960 U/min total power requirement 125 kW weight of the machine ca. 67 t dimensions of the machine ca. 13,2x7,8x5,1 m Peripheral grinding support: 960 rpm, 22 kW Universal grinding support: 7 kW, 500-2900 rpm Dressing device The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Fodpfxoyqr Ugj Akhjgf If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Speed relay - new, available sizes: ALNICO 01 (01T) ALNICO 02 (02T) Fsdpewa Sngsfx Akhogf ALNICO 04 (04T ALNICO 11

Condition: good (used), Nabertherm High-Temperature Furnace 1600 °C Fsdpfxswxwa Es Akhegf The HT 04/16 - HT 450/18 high-temperature furnaces have proven themselves in the laboratory and in production for many years. Whether for quartz glass, glass-ceramics, the sintering of CIM components, or other processes up to a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction and compact, floor-standing design, these high-temperature furnaces are ideal for laboratory processes that require the highest precision. Excellent temperature uniformity and sophisticated details set unsurpassed quality standards. Tmax 1600°C Double-walled housing construction with fan cooling, resulting in low outer wall temperatures Heating from both sides via molybdenum disilicide heating elements High-quality fiber insulation with special backing insulation Side insulation, constructed from tongue-and-groove blocks, ensures low heat loss to the outside Durable ceiling insulation with special suspension Parallel swing door with chain guide for defined opening and closing of the door Labyrinth seal ensures minimal temperature loss in the door area Exhaust air vent in the furnace ceiling Heating element control via thyristors NTLog Basic for Nabertherm controller: Recording process data via USB stick Maximum temperature: 1600°C Internal dimensions (mm): 200x200x200 External dimensions (mm): 830x370x590 Volume (L): 4 Connected load (kW): 5.2 Electrical connection: 3-phase Weight (kg): 150 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 1996, condition: excellent (used), Vötsch VSKZ 04/120/S Walk-In Climatic Test Chamber Fodpfeuuigyex Akhogf Manufacturer: Vötsch Type: VSKZ 04/120/S Temp. Range: -40°C to +120°C Line Voltage: 400V Rated Current: 95A Rated Power: 56 kW Refrigerant: R 404 A Year of Manufacture: 1996 External Dimensions: W 2850 x D 4100 x H 3080 mm SO-01 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1998, 4 spindle paper drilling machine Dürselen PB 04 year 1998 Machine works perfectly complete with instructions, spare parts list, drills and tools - Drill hole diameter 3 - 15 mm - drill distance between the drill heads 31.7 - 293 mm - max. drilling distance over sliding table 420 mm - min. drilling distance above sliding table 1 mm - Insertion depth behind the drills 65 mm - Sliding table width 450 mm Fjdpeuiy Snefx Akhegf - Sliding table size in front of the drills 300 mm - Max. stacking height 50 mm The sliding table can be "programmed" for individual drilling can be "programmed" for individual drilling patterns. Dimensions W 77 cm x D 76 cm x H 135 cm Power connection 380 V Weight 275 kg

Condition: reconditioned (used), Manufacturer: Provisur / Beehive Model: RSDD-04 Type: Separator Fgodpfx Akoy Akhdshjf Dimensions: 2150 x 700 x 1650 mm Power: 21 kW Power supply: 400V 50Hz 3N Sieve hole diameter: 1 mm Material: Acid-resistant stainless steel Machine renovated and ready to work.

Condition: used, For sale is a HEIDENHAIN BF 150 monitor with integrated cooling fan, ID 353 522-04, in like-new condition. The unit is fully functional and has been tested prior to sale. Details: Manufacturer: Heidenhain Type: Monitor with cooling fan Model: BF 150 ID: 353 522-04 Condition: Like new Function: Fully functional, tested Warranty: 7-day functional warranty The item will be carefully packaged for shipping. Ideal as a replacement monitor or for immediate use in existing HEIDENHAIN control systems. Fjdsylctvepfx Akhegf Please feel free to contact me if you have any questions or are interested.

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Fgjdpfxoxz Ab Rj Akhof Year of manufacture: 2008 Machine No.: R7AW0401

Condition: used, Year of construction: 1999, x-travel 2500 mm y-travel 1200 mm Fjdpfsyqv Taox Akhsgf z-travel 1000 mm turning speeds 20-1600 U/min spindle taper ISO SK50 Table dimensions 2700x1000 mm control Heidenhain TNC 426 milling head -swivable ° Spindle capacity 20 Kw Tool changer 36 Pos. weight of the machine ca. 18 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team