Used Arthur Klink Vertical Internal Broaching Machine for sale (71,713)

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 1,016 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 760 mm, Available for immediate pickup from our location: Vertical machining center ZPS Depo Type MCTV 1060 NT Year of manufacture 1998 Heidenhain iTNC 426 M Table 1270 x 590 mm Travel distances X/Y/Z 1016/610/760 mm SK 50 Spindle speeds up to 8000 rpm Table load max. 900 kg Dedpfx Akjzrbzkohokr Drive power 11 kW Tool changer, 24-position Distance spindle – table 80 – 840 mm Weight 6700 kg Price: Euro 6,500.00 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 2005, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Dkodpfx Akszru Rfehor Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 1539000208A, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Heidenhain TNC 620, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Rapid traverse rate: 25 m/min Table size: 1,200 × 560 mm Motor spindle speed: 10,000 rpm AC main drive power: 13/9 kW at 40/100 % duty cycle Tool positions: 20 Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain TNC 620 Connected load: 17 kVA Rated current: max. 28 A Fuse rating: 35 A Dksdeztb Imepfx Akhjr Mains voltage: 400 V Mains frequency: 50 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,100 kg EQUIPMENT Electronic handwheel Chip conveyor with extended coolant tank Coolant/air blast switching Coolant spray gun Heidenhain TS 649 measuring probe

Condition: ready for operation (used), Year of construction: 2010, X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible. Dkedpfx Akszrn Iwjhor

Condition: good (used), Year of construction: 2016, Vertical machining center Machine type: DMG Mori Ecomill 1100 V Control: Siemens 840 Dsl -Operate Year: 2016 SPECIFICATIONS Travel X-Axis: 1.100 mm Y-Axis: 560 mm Z-Axis: 510 mm Dkjdpfjzrm H Sex Akhjr Rapid motion: (X/Y/Z): 36 / 36 / 30 m/min. Spindle speeds: 12.000 rpm Spindle motor: 13 kW Torque: 82 Nm Tool: SK 40 Toolchanger Tool capacity: 24 Table size: 1.400 x 560 mm Max. Table Load: 1.000 kg Equipment Chip conveyor Cooling pumps Internal cooling: 17 Prod. Pack 1 bar

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 68, Equipment: cooling unit, documentation/manual, MIKRON HSM 400 U vertical machining center, equipped with HEIDENHAIN TNC 530, manufactured in 2007. Gantry structure. Table equipped with EROWA ITS 148 receiver. Travel: X 400, Y 240, Z 350, B +110°/-110°, C 360°. Feed rate: X, Y, Z 40 m/min. Table load: up to 25 kg. Electromandrel head, 42,000 rpm, 12/13 kW, HSK E40. X, Y, Z linear scales. Chip extractor. Head coolant unit. 68-tool changer. Dkedozru Idopfx Akhor Machine weight: 7,000 kg.

Condition: used, machine/vehicle number: MC939B03, overall weight: 5,800 kg, input voltage: 400 V, type of input current: three-phase, Vertical Machining Center. Manufacturer: Falcon Machine Tools Co., Ltd. (Chevalier, Taiwan) Model: 2040VMC Serial Number: MC939B03 Type: CNC Vertical Machining Center Machine Weight: 5,800 kg Maximum Spindle Speed: 8,000 rpm Power Supply: 400 V Required Power: 15 kVA Dedpfx Aksztba Nohjkr Air Pressure Required: 5 kg/cm²

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, torque: 115 Nm, controller manufacturer: Fanuc, total height: 2,750 mm, total length: 2,200 mm, total width: 2,360 mm, table width: 500 mm, table length: 900 mm, table load: 500 kg, overall weight: 6,400 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, Year of manufacture: 2013 CNC Fanuc TABLE Table size: 900 x 500 mm Five T-slots: 18 H 8 mm Maximum permissible weight on the table: 500 kg WORKING CAPACITY X-axis: 700 mm Y-axis: 530 mm Z-axis: 560 mm Spindle nose – table surface distance: 150 / 710 mm Spindle axis – column surface distance: 550 mm SPINDLE Spindle diameter: 70 mm Spindle taper connection Big Plus: ISO 40 DIN 69871 Spindle speed: 50/12,000 rpm Spindle motor: 15/11 kW Maximum torque: 115 Nm FEED RATES Rapid traverse rates for X/Y/Z axes: 32 m/min Working feed rates: 20 m/min TOOL MAGAZINE Number of tools: 30 Tool taper: ISO 40 Maximum tool diameter (without adjacent tools): 76 / 125 mm Maximum tool weight: 7 kg MACHINE DIMENSIONS Height: 2,750 mm Dsdpfszr Uq Sox Akhjkr Footprint: 2,200 x 2,360 mm Weight: 6,400 kg Machine complete with: •Presetter •Probe •Vise •Tool cabinet •Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle running hours. The machine can be connected and tested on-site. Dedezr Rugepfx Akhjkr

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 9909220, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: FADAL, workpiece weight (max.): 800 kg, total height: 2,200 mm, total length: 2,900 mm, total width: 2,400 mm, table width: 508 mm, table length: 1,220 mm, overall weight: 4,800 kg, number of spindles: 1, number of slots in tool magazine: 21, input voltage: 230 V, type of input current: three-phase, Equipment: documentation/manual, For sale: a reliable American CNC milling machine. This machine is from the renowned HT series – the most powerful and sought-after Fadal version. It features dovetail guideways, is rigid, heavy-duty, and designed for machining steel. The machine is in working order and can be inspected while powered on in Środa Wielkopolska. Dkedeztcz Ispfx Akher

Condition: used, Year of construction: 2011, Technical details: Djdpfezq S D Tox Akhskr x-travel: 660 mm y-travel: 355 mm z-travel: 500 mm total power requirement: 19 kW weight of the machine ca.: 4,1 t

Condition: used, Year of construction: 2016, operating hours: 24,000 h, functionality: unexamined, machine/vehicle number: 466, Wenzler VKM 1-1 CNC Vertical 5-Axis Machining Center Description Type: CNC Vertical 5-Axis Machining Center Manufacturer: Wenzler Dedpfxozrv Dge Akhekr Model: VKM 1-1 Year of Construction: 2016 Serial Number: 466 Condition: Used Quantity: 1 HS Code: 84571090 Item Description The lot includes: One CNC Vertical 5-Axis Machining Center and accessories Technical Data Machine History and Condition The machine was used as a demonstration machine from 2016 to 2022. From 2022, it was used in production at HAL Automotive Plauen GmbH for machining axle carriers. Before being put into operation in production, the machine was overhauled and upgraded. A new milling spindle was acquired in December 2024. The spindle has a running time of approximately 500 operating hours. Operating hours: approx. 24,000 hours Working Area X-axis: 1,500 mm Y-axis: 1,250 mm Z-axis: 880 mm Feed Rate / Rapid Traverse X-axis: 100 m/min Y-axis: 100 m/min Z-axis: 100 m/min Axis Acceleration X-axis: 7 m/s² Y-axis: 7 m/s² Z-axis: 10 m/s² Jerk: 150 m/s³ Table Load Maximum Workpiece Weight: 400 kg Spindle Tool Interface: HSK 100 Maximum Spindle Speed: 10,000 rpm Power, S6 / 40% Duty Cycle: 40 kW Maximum Torque: 175 Nm Tool Magazine Number of Positions: 36 Maximum Tool Length: 520 mm Maximum Tool Diameter with Empty Adjacent Position: 205 mm Maximum Tool Weight: 20 kg Maximum Total Magazine Load: 200 kg Tool Change Time: 3 seconds Equipment Included in the Scope of Supply Chip Conveyor Cooling Unit Cooling Unit Manufacturer: Lahntechnik GmbH Model: KESY 280-01 Serial Number: 2017-05981 Year of Construction: 2017 Rated Power: 13.6 kW Rated Voltage: 400 V / 3~ / PE / 50 Hz Control Voltage: 24 V DC Protection Class: IP54 Refrigerant: R410A – 10.03 t CO₂ equivalent Maximum Operating Pressure: 30 bar HD / 19 bar ND Dry Weight: 400 kg Country of Origin: Germany Not Included in the Scope of Supply The machine or the economic asset does not include product-specific tools, fixtures or robot grippers. Operational Status and Inspection The machine was taken out of production in October 2025 due to the factory closure. The machine is still connected to the power supply and can be inspected in this condition. However, a test run is not possible as no machine operator is available. Please view the videos recorded by the machine in December 2025. Transport and Loading No special transport securing is required. Special lifting and transport equipment from Wenzler is required for loading and unloading. The buyer must rent this equipment directly from Wenzler / Heller Group. After lifting and unloading, the buyer is responsible for returning the equipment to Wenzler.

Condition: good (used), Year of construction: 1990, functionality: unexamined, total height: 3,000 mm, total length: 5,400 mm, total width: 2,900 mm, overall weight: 8,600 kg, For sale from our Bremen location. Manufacturer: Model: AJV25/404 Mazak with 2 worktables and 3 machine vices, as well as accessories, including 1 T-slot worktable, 1 additional machine vice, 1 chip conveyor, and 1 tool changer, with 30 tools. Year of manufacture: 1990 Technical data: X-axis travel: 1000 mm Y-axis travel: 508 mm Z-axis travel: 460 mm Rapid traverse rate: X/Y-axis: 24 m/min Z-axis: 18 m/min Control system: Mazatrol M-32 Table length (clamping surface): 550 x 1240 mm Table width: 410 mm Workpiece weight: 300 kg Tool changer: 40 Spindle taper: CAT 40 Dsdpszq Hw Ujfx Akhokr Max. working spindle torque: 263 Nm Max. spindle speed: 28 – 4000 rpm Spindle motor power: 15 kW Length x Width x Height: 5400.0 x 2900.0 x 3000.0 Weight: 8600 kg

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Sale from Bremen location. Manufacturer: Mazak with chip conveyor and accessories Type: VQC-15/40 Year of manufacture: 1985 Technical data: X-axis travel: 560mm Y-axis travel: 410mm Z-axis travel: 380mm Control system: Mazatrol CAM M-2 Table length: 900mm Dodpezq Hwnjfx Akhskr Table width: 410mm Workpiece weight: 300kg Tool changer: 30 Spindle taper: CAT 40 Max. spindle speed: 6000rpm Spindle motor power: 7.5KW Length x Width x Height: 2300.0 x 2400.0 x 2480.0 Weight: 4750 Kg

Year of construction: 2004, condition: ready for operation (used), A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible. Dkedpfozrhg Tjx Akhor

Condition: excellent (used), Year of construction: 1996, CNC machining center MORI SEIKI MV-40B/40 Year of manufacture: 1996 X-axis: 800 mm Y-axis: 410 mm Z-axis: 510 mm Dkodpfew Ebtcex Akhor Spindle speed: 8,000 RPM Workpiece Workpiece weight: 700 kg Table External length: 1,100 mm External width: 450 mm

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways Dedpfx Aeyh Ri Iokhjkr - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: used, Year of construction: 2015, travel -x axis 762 mm travel -y axis 530 mm travel -z axis 560 mm control Siemens Sinumerik 828D max. Spindle speed 10.000 U/min. table-size 900 x 500 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | QUASER - MV 154 C-10B equipped with 30-way tool changer and chip conveyor. The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dkedpfszq Hkbex Akhor #Tags: MV-154 | MV154 | MV 154 C 10B | MV154C

Condition: used, Year of construction: 2021, travel -x axis 712 mm travel -y axis 508 mm travel -z axis 515 mm B-axis ° C-axis 360 ° control Siemens Sinumerik 828D max. Spindle speed 12.000 U/min. rotary table dia. 410 mm max. swing diameter 500 mm max. table load 200 kg tool taper BT40 5-axis machining center | QUASER - UX 500 equipped with ITC, tool changer and chip conveyor. The machine is in a well-maintained condition. Dkjdpfxszq Hi Re Akhsr Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: UX-500 | UX500

Condition: used, Year of construction: 2013, travel -x axis 762 mm travel -y axis 530 mm travel -z axis 560 mm control Siemens Sinumerik 828D max. Spindle speed 10.000 U/min. table-size 900 x 500 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | QUASER - MV 154 C-10B equipped with 30-way tool changer and chip conveyor. The machine is in a well-maintained condition. Dkjdpfx Ajzq Hi Dokhsr Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MV-154 | MV154 | MV 154 C 10B | MV154C

Year of construction: 2016, condition: excellent (used), functionality: fully functional, We offer this Apollo SRL Macchine Utensili Modular 1 vertical head punching machine, type MB045161215, manufactured in 2016, in very good condition. Djdpfx Aezrpfkjkhskr If you have any questions or require further information, please contact us by email or phone.

Condition: used, Year of construction: 2003, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Mori Seiki Machining Center Model NV5000A/40 Dksdpfx Aezqbm Dokhjr Year 2003 Chip Conveyor ✅ Spindle ✅ Table ✅ Without Ball Screw ❌ Without CNC Drives ❌ The machine is missing the ball screw and the CNC drives; other than that, the spindle and table are present; the machine is otherwise complete.

Condition: used, functionality: fully functional, Year of construction: 2021, !! Short delivery time, we are happy to advise you !! A simple flow pack machine suitable for packaging various products. You have the option to inspect it locally before making a purchase decision. 3 units available Dkedpeu T N Umjfx Akhsr Used. Thermal transfer printer available as an option: €1,900

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 450 mm z-travel 450 mm Dkodszq Hl Eepfx Akhsr Control Heidenhain The machine is used and untested. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, x-travel 560 mm y-travel 500 mm Dsdpfszq Hlrox Akhokr z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!