Used Atom Automatic Cutting Table System for sale (63,145)

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully automatic PLC parts cleaning system The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without dismantling. The unit is space-saving, quiet and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz, 16A CEE 5p 6h plug Drain: 1 1/4" outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Whole components (without dismantling) Quality seals: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heater: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 kg Application area: The RWR 80 L KST fully automatic PLC has been developed for the field of plastic injection molding and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system begins to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically, Isdpfxszgclmj Aayotk after the instructions displayed on the screen have been confirmed. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We would be happy to answer any further questions you may have on the phone.

Year of construction: 2026, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!!!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure can be adjusted from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optional up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blower gun inside • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Top-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with support from gas springs • Monitoring of door opening by means of a safety limit switch Iodpfxjf A D Nme Aayjtk • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: used, Sawing machine, automatic saw, automatic cutting machine, Adige CM501 – used machine Itodpfx Aasy Ayc Djysk Manufacturer: Adige Model: CM 501 Year: 1996 Blade diameter: 250–360 mm Cutting length: 2100 mm Max. workpiece diameter (round): 85 mm Max. workpiece size (square): 70 × 70 mm The ADIGE CM501 automatic circular sawing machine, manufactured in 1996 in Italy, is designed for fully automatic cutting of solid materials, tubes, and profiles made of steel, brass, aluminium, and other light alloys in industrial production environments.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 050155-1, Glass cutting table by Bystronic, model SMFR. Technical specifications can be found in the photos below. Full technical documentation available. Itsdpfox Ekvmox Aaysk

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Speed display via LED on the front Aluminum fence cheeks Arc milling guard Right/left rotation of the milling spindle MK 4 quick-change milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Itedsdqzcxepfx Aayek Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Location: In stock at 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1992, fully automatic programmable capping with additional line detection for defect capping via LUT system Itodpfxol H E Tae Aayjk infeed belt 6 m 6 ejection stations total length 12 m The infeed belt is not running at the moment, probably because of the frequency converter.

Condition: excellent (used), functionality: fully functional, Automatic slab storage system (vertical slabs) n. 1 Jot for slab pack composition n. 1 robot for vertical picking/deposition/picking of packs Itodpfoxxlk Nox Aaysk composed by 130 cells of about 10 slabs each. N. 1 Jot for slab pack breakdown length about 50 meters.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser hours: 7,000 h, laser power: 4,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 750 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, power: 4 kW (5.44 HP), Equipment: CE marking, cooling unit, dust extraction, fume extraction, ONLY 7,000 OPERATING HOURS – LASER UNIT! Special Equipment: - Automatic front-opening sliding door - Cabin lighting - Movable pendant control panel - FastLine Cell - 2D cutting tables with support rails & drawers Standard description: - Machine frame with Y-arm and integrated laser unit - Laser unit: CO2 laser TruFlow4000, high-frequency excited Itodoyidpqjpfx Aayok - Maintenance-free turbo radial blower - Mirror telescope - Cooling unit - Positioning laser diode - Laser power control - Logbook function - Drives: maintenance-free three-phase servomotors - Illumination under the Y-arm - Magnetic coupling for processing head - Head detection - AutoLasPlus - Pendant control panel - TFT color monitor - Teach panel - Network connection RJ 45 Processing Methods: - Laser cutting - Dynamic cutting head (155mm) - Cutting head (240mm) - PierceLine

Condition: like new (used), We sell an automatic machine to cut vaseline for embroidery. Ideal for high volumes shops using, ZSK, Tajima, Barudan, Brother, Happy machines. High end and easy to operate, huge savings on labor/material Completely programmable Itodpfx Aajxz S Tveyok Rare

Condition: new, Year of construction: 2024, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! The system was purchased in 2024 and has not yet been put into operation due to an order backlog! The new price of the system was €672,000 plus VAT! According to the documentation, the system’s production started in 2023. The final assembly took place in 2026. The video is an example video. It does not show the actual system that is for sale! The system has the following configuration: TECHNICAL DETAILS Storage type: Single-deep storage, double-deep Total capacity: approx. 4,540 containers Permissible container weight: 30 kg per container Itedjznc R Sepfx Aayjk Block on the picking side Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 1,974 Storage locations for 170 mm boxes: 276 Block on the back of the storage Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 2,020 Storage locations for 170 mm boxes: 276 Rack and pinion stacker crane Type: AP 31 including double-deep feed table Direction of movement: Horizontal Acceleration: max. 3.5 m/s² Speed: max. 3.5 m/s Box feed Pneumatic lowering for containers: 1 piece Roller conveyor technology: approx. 4.5 m Pneumatic stopper, side: 1 piece Drive: 1 piece Electric drive with inverter: 1 piece Pneumatic drive: 2 pieces Emergency stop button: 1 piece Box storage Pneumatic lowering for containers: 1 piece Roller conveyor technology: approx. 4.5 m RollerDrive element: 1 piece Pneumatic stopper, side: 1 piece Drive: 1 piece Control of the RollerDrive element: 1 piece Electric drive with inverter: 1 piece Pneumatic drive: 2 pieces Express retrieval Gravity roller track: 1.3 m Substructure for storage stiffening: 2 pieces Special feed RollerDrive element: 1 piece Substructure for storage stiffening: 2 pieces Control of the RollerDrive element: 1 piece Pick by Light workstation RollerDrive element: 1 piece Projector: 1 piece Superstructure for storage stiffening: 1 piece Control of the RollerDrive element: 1 piece Projector control: 1 piece Further technical details can be found in the attached offer.

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Iodpfev Iccfox Aayjtk Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Itodpfxoxvwcxs Aayok Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Isdpfxsxa Excs Aayjtk

Year of construction: 2002, condition: ready for operation (used), A Hegla glass cutting system will be available approximately from December 2026. Direction of travel: right-left, connected load: 35kW, max. glass sheet dimensions X/Y: 4600mm/3210mm, max. single glass thickness: 16mm, machine dimensions X/Y/Z: approx. 13200mm/6000mm/1000mm. The stops are worn. Documentation available. An on-site inspection is possible. Iodpfx Aaszi Eigeystk

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Itjdpfx Aaeynnlieyok Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: excellent (used), Lasermax LX550 Roll Feed System with LX581 Module Roll-fed digital print finishing system Designed for continuous-feed digital printing applications Automatic web feeding and tension control Integrated touchscreen control High-volume production capability Suitable for transactional, direct mail and book production workflows Modular system design Made in Sweden Technical Data LX550 Power supply: 230 V, 1-phase, 50 Hz Power consumption: 1800 W Rated current: 10 A LX581 Power supply: 200–240 V, 1-phase, 50/60 Hz Power consumption: 1200 W Rated current: 10 A Circuit breaker: 15 A Machine Information LX550 Serial No: 09LX550034 Itedpszaq Rfjfx Aayjk LX581 Serial No: 09LX581002

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 250 V, We offer this used Wagner Ecotech System powder coating equipment, manufactured in 2007. Iodozn Ixnepfx Aayotk - Powder coating booth with spray robot (6 spray guns) - Donaldson Torit dust extraction system (11 kW) - 75m automatic Emotec conveyor system (disassembled). Year of manufacture unknown.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: GG65LC-13642, input voltage: 380 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 543LMT-J: PLF float glass cutting table with Low-e coating grinder LMT. SN: GG65LC-13642 (2600Kg-39.1A-10kA) from 2007. Bottero 352 BCS at the end of the cutting/grinding line as a break-out table. SN: GG60SB-3040 (2250Kg - 50Hz - 14.5kVA-380V) from 1995. Itedpfx Ajw I Dvksayjk

Year of construction: 2024, condition: used, functionality: fully functional, Maximum paper feed size ( mm ): 1320*980mm Minimum paper feed size( mm ): 350x450mm Maximum die cutting size( mm ): 1300x960mm Minimum mouth size( mm ): 8mm Maximum die cutting pressure( T ): 350N/cm² Machinable paper( mm ): 200-2000g/ m² / 10mm (max thickness) Itedew Rwipopfx Aayek Die cutting accuracy( mm ): ±0.1mm Maximum speed(sheets/hour): 5500 sheets/h Maximum stack height of paper feed(mm): 1400mm (above the level) Minimum stack height for receiving paper(mm): 1250mm (above the level) Gross power(KW): 18.5kw Machine weight(T): 19 T Overall dimension: 7500x2200x2250mm

Year of construction: 2004, condition: ready for operation (used), A mechanized Kjellberg CNC plasma cutting system is offered. Cutting current range: 40A-200A, duty cycle: 100%, output power: 200A at 150V, lower operating point: 60A at 104V, material thickness range: approx. 3mm-60mm, maximum piercing capacity: approx. 30mm, applicable plasma gases: air, oxygen, argon/hydrogen mixture, nitrogen, suitable materials: mild steel, stainless steel, aluminium, electrically conductive materials. Dimensions: approx. 980mm/644mm/1320mm, weight: approx. 370kg. Inspection possible by arrangement. Itsdpjzmh T Nefx Aaysk

Year of construction: 2026, condition: new, functionality: fully functional, ERFOR GR7 Granulator – Efficient Plastic Recycling Solution Itsdpsy Eyrdsfx Aayjk We offer the ERFOR GR7 granulator – a robust and efficient machine designed for producing high-quality regranulate from plastic materials. An ideal solution for companies looking to process production waste and reduce raw material costs. Key Information: Throughput: up to 700 kg/h Materials: LDPE, HDPE, PP (films, production waste, printed materials) Stable, continuous operation High and consistent granulate quality Simple and reliable operation Equipment: High-performance plasticizing unit Automatic filtration system Granulation system Compact, industrial design Why GR7: Fast return on investment Reduced material losses Reliable and long service life Configurable to customer needs Condition: New / built to order Manufacturer: ERFOR / Koltex PRS Contact us – we will configure the machine for your material and required capacity.

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Itodjztn Eropfx Aayjk Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm Iedszgc Ubopfx Aaystk The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source manufacturer: Maxphotonics, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, Why still bother with the cut quality of fine plasma systems? Why still waste valuable space in your workshop with a rotary table? Why still spend thousands of euros each year on expensive plasma wear parts? In addition to the obvious advantages of modern fiber laser technology regarding precision and virtually burr-free laser cut quality, laser cutting is surprisingly cost-effective. At the same time, laser cutting is much easier to operate than plasma cutting systems. And the best part is that we, Schmidt & partners Cutting, support your system from our two service centers throughout its entire service life. We are a reliable partner in the cutting world, providing perfect consulting, installation, training, maintenance, and repair services. We support you with our know-how and experience, including cutting parameters for special materials. We also gladly assist you with the implementation of this technology in your company, particularly with regard to the specific occupational safety aspects of laser technology. kaitec FIBER Pro HGLQ 3015 Cutting area 1,500 x 3,000 mm Max. sheet thickness 35 mm (depending on the laser source power) Laser systems 2kW / 3kW / 4kW / 6kW / 12kW Maxphotonics series Itsdszkuu Ispfx Aaysk (in cooperation with AK Industry GmbH, the certified service partner in Germany) CE certified, risk assessment completed Do you not yet have a suitable filter system? We will gladly select the appropriate filter system to meet your needs. We look forward to hearing from you!

Year of construction: 2026, condition: as good as new (ex-display), Manual cleaning is performed using special gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60°C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Isdpfxjf A Nq As Aayjtk Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard configuration: • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring assistance • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator