Used Aus Kunststoff Durchmesser 25 Cm for sale (26,161)

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control system: MC4 with color monitor, operator panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould open stroke: 820 mm Min. mould height: 330 mm Max. opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Fgedpfx Akjxak Ucjhof Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions & Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 1200 x 1200 mm, 40 - 125 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 15 bar, capacity 1200 - 4500 liters, filter surface 85 - 350 m², dimensions 7000 - 13.500 x 1800 x 2400 mm, weight 10.000 - 28.000 kg, autom. plate transport, engine hydraulics, with or without filter cloths Fgsdpfsfbbqhex Akhjf

Condition: new, Year of construction: 2023, Transformer substation, concrete construction, UF2742 Dimensions (L × W × H): 2.70 m × 4.18 m × 3.32 m Medium-voltage switchgear, Siemens 8DJH type • 2 ring cable feeder bays • Auxiliary switch • Short-circuit indicator • Capacitive voltage indication system • 1 transformer feeder bay • Auxiliary switch • Overcurrent and earth-fault protection with WIC relay • Capacitive voltage indication system Three-phase oil transformer • Type: SBG Fgodjznmuhspfx Akhsf • Power: 1,250 kVA • Hermetically sealed design

Condition: like new (used), 92 linear meters of galvanized pallet racking for outdoor use, Nedcon Like new, see pictures! A top-quality racking system from the major manufacturer NEDCON – a subsidiary of Voestalpine AG with headquarters in the Netherlands. Frame: Height 7.2 m, Depth 110 cm, Strong profiles, reinforced bracing, wind and snow load calculated. Frame and base plates are Sendzimir galvanized. Beam length 2.7 m, hot-dip galvanized, Beam profile 130/50mm, Beams with load capacity/bay: 4000 kg Negotiable price: on request! The offer includes: + 36 units of pre-assembled frames, depth 110 cm, height 7.2 m + 210 units of beams, length 2.7 m, 4000 kg load capacity/bay + 420 units of safety locking mechanisms + 72 units of concrete anchors Additional cost for hot-dip galvanized feet incl. upright protection: €50 net per frame Roof structure available on request! Load capacity signs, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. Goods are in stock. Transport and assembly are available on request. Other configurations available on request. Over 2000 meters available. Inspection possible at any time by appointment. Further information on request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, details, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel platform structures immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether you want to buy pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) Fjdpfx Aksfndh Tohegf • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including thorough cleaning. 2. Commission-based auction: Carrying out auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-b

Condition: ready for operation (used), Year of construction: 2003, clamping force: 1,250 kN, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,000 kg, product length (max.): 4,400 mm, Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details. • Opening force: 35 / 28 kN • Tie bar spacing (H × V): 470 × 470 mm • Mould installation height min.: 300 mm • Opening stroke: 900 mm • Ejector stroke: 150 mm • Ejector force: 22 / 10 kN • Injection unit: SP 520 • Screw diameter options: 35 / 40 / 45 mm • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticizing rate (PS): approx. 22–41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil filling quantity: 345 l • Max. mould weight: 1485 kg • Power supply: 3 phases • Operating voltage: 400 V • Frequency: 50 Hz Fjdpfoylkxaex Akhogf Additional equipment • Cooler (included)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 26,000 h, clamping force: 1,250 kN, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,500 kg, product length (max.): 4,480 mm, Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details. • Screw diameter: 45.0 mm • Tie Bar spacing: 470 x 470 mm • Shot volume: 275.0 cm3 • 6 heating zones • Hydraulic core • Interface: Euromap 12 robot interface • Outer length: 745 mm Fedozk D Nuopfx Akhjgf • Outer width: 770 mm

Condition: used, machine/vehicle number: 19163, Pappschere / Board Cutter Krause 140/72cmSchnittlänge / Cutting Length 140cm Tischbreite / Table width 72cm Auffang- tisch, Fußpressung Fjdpfxoh Szf Ee Akhjgf Vorderan- schlag mit Schmalschneider vordere Anlegeleiste mit darauf verschiebbarem Anlege- winkel Maßskalen in mm-Teilung Gewicht/ Weight 420 kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m Fgodpfx Aezc Nw Askhef All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Isolation amplifier, level limit switch, level gauge, sensor, switch, level transmitter, limit switch -Type: Nivotester FTL325N-F1E1 -Quantity: 6 available Price: per piece Fodpfxod Tvuho Akhogf -Weight: 140 g

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm -Individual components: filters/valves, see photos -Dimensions: 2285/800/H900 mm Fgjdpfx Akeg Avqcshjf -Weight: 1132 kg

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Feldpausch, conveyor belt, transport belt, belt conveyor, height-adjustable -Speed: 15 m/min -Belt width: 250 mm -Conveyor length: 2060 mm -Height: max. 920 mm -Drive: Engel 0.06 kW, see photo of nameplate Fgodeyk T Dcepfx Akhof -Transport dimensions: 2060/530/H810 mm -Weight: 70 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Fjdszh I Iispfx Akhjgf Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: used, Year of construction: 2004, Krauss Maffei KM125-390 C2 (Year of manufacture 2004) Clamping force: 125 kN Fgsdpfx Akjxuq R Hohjf Operating hours: approx. 63,000 h The machine can be inspected at any time

Condition: like new (used), 42 linear meters of galvanized pallet racking for outdoor use, Nedcon Like new, see pictures! A top-quality racking system from the renowned manufacturer NEDCON - this is a subsidiary of Voestalpine AG with its headquarters in the Netherlands. Frame: Height 7.2 m, depth 110 cm, strong profiles, reinforced bracing, wind and snow load taken into account. Frame and base plates are hot-dip galvanized. Beam length 2.7 m, hot-dip galvanized Beam profiles 130/50mm, beams with load capacity per bay: 4000 kg Negotiable price: on request! Offer includes: + 16 units of frames, pre-assembled, depth 110 cm, height 7.2 m + 90 units of beams, length 2.7 m, 4000 kg load capacity per bay + 180 units of locking devices + 32 units of concrete anchors Surcharge for hot-dip galvanized feet including upright protection: €50,- per frame (net) Roof structure available on request! Load capacity signs, documents, etc. are of course included. Further accessories can be found in the accessories catalog. Goods are in stock. Transport and assembly are possible on request. Other configurations available on request. Over 2000 linear meters available. Inspection possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, information and prices, as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Fjdpfofndllox Akhogf Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers in new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailers of goods turnover weekly for maximum selection 📦 OUR ASSORTMENT (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks, or racking for IBC containers - we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Warehouse Technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete worry-free package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including thorough clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service through our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you found us through heavy-duty racking or are looking for heavy-duty racking, galvanized / heavy-duty racking system - we guarantee the best conditions. Contact us for a non-binding offer!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 62,000 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 70 mm, displacement volume: 1,077 cm³, Clamping unit: Clamping force 2500 kN Mould opening force, max. 169 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1877 bar Stroke volume 1077 ccm Shot weight (PS) 980 gr. Injection rate 385 ccm/s Screw speed 220 1/min Plasticising rate max. 76 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 29 kW Adjustable barrel heating zones 6 Oil Reservoir capacity 720 ltr. Fgedpfx Aozfpthekhef Dimensions and weights: Dimensions of the machine ca. 6,50 x 2,20 x 2,40 m Total machine weight 14500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei robot LR100 X: 550 mm, Servo Y: 1200 mm, Servo Z: 2000 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x hydr. core pull - 1 x Air valve - Accumulator - 6 x hotrunner controller - Robot interface according to Euromap 67

Year of construction: 2011, condition: excellent (used), machine/vehicle number: MBMA500Ausschub, DEMAG KBK - double girder extending crane - crane runway with dimensions approx. 15x5m (5m bridge + 2 central 6.5m rails) with approx. 1.5m on both sides !!! extension. Payload / lifting capacity 500 KG - 0,5to Technical data of the system: Crane runway made of Demag KBK2 rails The installation is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports, extension frame type B2/2 etc. incl. 500KG Demag DC chain hoist - lifting height approx. 5m Fgedpju I Ur Nofx Akhof Power supply on the long side by means of conductor rails Crane is dismantled and immediately available Running rails can be extended to length x Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: excellent (used), For sale: Original J.D. Neuhaus PROFI pneumatic hoist, model LN-1T, with a lifting capacity of 250 kg (0.25 t). Manufactured in Germany in 1991 by J.D. Neuhaus Hebezeuge GmbH & Co., Witten-Heven – a global leader in pneumatic lifting systems. Technical specifications: • Model: PROFI LN-1T Fgodextfnwjpfx Akhjf • Lifting capacity: 250 kg (0.25 t) • Year of manufacture: 1991 • Power supply: 6 bar compressed air • Air consumption: approx. 3–4 m³/min • Chain: steel 5 x 15 mm, DIN 5684-8 standard • Controls: dual-lever (up/down) • Weight: approx. 35 kg Condition: • Used, fully functional. • Complete set including hook, control valve, and chain bag. • Normal signs of use, with no mechanical damage. Applications: Suitable for lifting tools, components, and parts in workshops, assembly lines, industrial plants, and ATEX zones (depending on version). JDN construction ensures reliability and durability – made in Germany, commonly used in the aerospace, petrochemical, and automotive industries.

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Manufacturer: Peddinghaus Model: 210/25s Fgedpfswcqmaox Akhof Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 3D Coordinate Measuring Machine | Brand: MAUSER/ZEISS | Type: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available with an air-conditioned hall. The machine has been calibrated regularly by ZEISS. The last calibration was performed on August 7, 2025, the next calibration (recommended) is scheduled for August 2026. TECHNICAL SPECIFICATIONS:: Measuring ranges (Length x Width x Height): 6.000 x 2.500 x 2.000 mm Travels: - X-axis: 6.000 mm - Y-axis: 2.500 mm - Z-axis: 2.000 mm Fgjdpfx Akjy Iub Sehef - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5,0 + L/250)µm, V2 = 3,5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5,0 + L/250)µm - Environmental conditions for maintaining the specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0,5°K/h, 1,0°K/d, 0,5°K/m - Environmental conditions for operation: * Temperature range: + 15°C up to 35°C * Humidity: 30 up to 70% General features, Equipment: - Portal measuring machine with ultra-precision guides and ball-screw drives - Second Y-axis with granite guideway and air bearing - High-resolution Zeiss scales - Positive-drive mechanisms in all three axes - Collision protection for the quill and probe head (for VAST-TK) for manual and setup modes - Safety position for crane interlock - Reference temperature compensation - Microcomputer control - Practice piece: cube, star-shaped stylus - Reference probe D = 8 mm, length: 115 mm - Reference standard D = 30 mm - includes basic software package - Load-bearing capacity: Limited only by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Year of construction: 2014, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, The KraussMaffei polyurethane injection presses are designed specifically for high-volume off-site timber frame production. With large 12.5 m × 3.3 m platen capacity and up to 260-ton clamping force, they allow full wall panels to be injected and in a single operation—delivering consistent insulation, structural stability, and repeatable quality. Integrated high-pressure metering and mixing systems ensure precise polyurethane dosing, while automated conveyors and positioning systems streamline panel loading and alignment. Fgsdpfx Aeyrh Ifokhef The result is faster cycle times, reduced labour, and factory-controlled insulation performance—making large-scale offsite timber frame manufacturing more efficient, predictable, and scalable. In short: Factory precision. Faster panel production. Consistent injected insulation for modern timber construction.

Condition: good (used), Year of construction: 2023, operating hours: 545 h, load capacity: 2,500 kg, lifting height: 4,300 mm, fuel type: diesel, mast type: triplex, construction height: 2,340 mm, Field of application: Internal logistics Fedpoxakw Djfx Akhjgf Number of valves: 3 General condition: very good Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Please contact Pieter de Vries , , ) for more information Additional options and accessories 3rd valve

Condition: used, Year of construction: 2010, machine/vehicle number: 0401-260013, The Peddinghaus HS FDB-2500 is a high-performance CNC plate processing center for the precise and economical processing of steel plates. The system combines drilling, thread cutting, countersinking, marking as well as oxyfuel and optional plasma cutting in one fully automated system - ideal for modern steel construction, plant engineering and industrial production. Fgodsy Iankjpfx Akhef

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 40 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, ejector stroke: 150 mm, opening stroke: 600 mm, total length: 4,480 mm, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,000 kg, power: 18.5 kW (25.15 HP), Equipment: documentation/manual, In perfect shape. Fgsdpfx Akowlhb Tshsf

Condition: good (used), machine/vehicle number: 550C08, A used PEDDINGHAUS punching machine with a large stroke and a large support table with stops. Punching force: 45 tons. Stroke rate: 40 strokes/min. Stroke: 762 mm. Fsdpfx Aed Hxrtjkhegf Working height: 1110 mm.

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions Fgedpfxexqhuue Akhsf - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse