Used Bütfering Aws Combi 1350 for sale (2,335)

Condition: excellent (used), Year of construction: 1993, Wieser Vorbrecher DV 1350-V EPS Crusher / Grinder / Shredder Capacity: 40 m³/h Available: 3 units In addition to its crushing function, the machine also acts as a rubbing mill (granulator), designed to break the material down into individual EPS beads. Unlike simpler machines of this type, which only feature a primary crusher, this is a much more advanced design consisting of two main sections: 1. Upper Section: Twin-Shaft Primary Crusher This section performs the initial size reduction of bulky material before it enters the grinding chamber. 2. Lower Section: Grinding and Rubbing System The final reduction process takes place in the lower chamber, which consists of: -Rotor: equipped with 3 moving blades -Stator (fixed knives): equipped with 2 stationary blades -Screen: located at the bottom of the chamber, allowing only sufficiently processed material to pass through Nljdpfx Acjwtmw Ao Tsc Optional Equipment The machines can also be supplied complete with dust collectors and an extraction fan. The Wieser ESTAL1350 dust collectors were specifically designed to match the throughput of the crusher. Tags: EPS shredder, EPS crusher, styrofoam grinder, recycling machine, waste reduction system, foam granulator, EPS waste processor, volume reduction machine, compactor, dust collector, extraction fan.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, empty load weight: 319 kg, maximum load weight: 1,031 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 256 150 1350 1 NEW VEHICLE Internal dimensions: 256cm x 150cm Side panel height: 30cm Loading platform height: 66cm Total weight: 1350Kg Payload: 1031Kg Braked single-axle trailer Overrun brake and parking brake by KNOTT Axle with large brake and cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Automatic jockey wheel with 400Kg support load 8 noise-reducing lashing eyes with 800Kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (powder-coated side panels and rims in black) -Ramps -Steel plate on the base plate -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf guard in various heights, also closed -Extension side panels 30cm with tensioning closure -Flat cover with or without bow -High cover 160cm or 180cm Further accessories available upon request! Plus freight to Gera and vehicle registration document 200 € net. Images are for illustrative purposes and may show optional accessories that incur an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. Njdpfjzb Nc Asx Ac Tslc The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to our premises.

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Nedszc N D Nspfx Ac Telc Material supply system Motan (dosing and conveying unit) available at an extra charge Robot Sepro Industrial Robot SDR 22S Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 19900 kg Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Njdpfx Aezc N A Ssc Tslc Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of Manufacture: 2011 Injection Unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 260 t Tie-bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional Equipment: Production line with Engel Viper 20 Robot Machine in very good technical condition Tie-barless hybrid machine: energy-saving and very quiet 8x air valve on the fixed platen side 2x hydraulic core pull on the fixed platen side 2x hydraulic core pull on the moving platen side 18 hot runner control zones Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of Manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B - rotation) driven electrically by servo motors; axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel brand safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg Length/Width/Height: 7.06x2.03x2.30 m Nedpfx Acszc N Arj Tjlc All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can attend live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Nsdpfjzc Nywex Ac Tjlc Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Nsdpfxezc Nyqo Ac Tjlc Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), mileage: 110,305 km, power: 121 kW (164.51 HP), first registration: 03/2023, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 105 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 6,960 mm, total width: 2,070 mm, total height: 2,270 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,800 kg, loading space length: 52,000 mm, loading space width: 22,500 mm, loading space height: 23,400 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, spoiler, tail-lift, traction control, = Additional Options and Accessories = - Automatic low beams - Heated exterior mirrors - Passenger seat - Roof spoiler - Third brake light - Euro 6 - Driver airbag - Remote central locking - Cruise control - Wooden slat trim - Height-adjustable steering wheel - Wireless charging function for mobile phones - Air conditioning - Front center armrest - Rain sensor - Rearview camera - Side door - Tachograph - Partition with window = Further Information = General Information Number of doors: 3 Cab: single License plate: VTV-98-F Technical Information Nledpfx Aszar Uxec Tsc Number of cylinders: 4 Engine displacement: 2,299 cc Front axle: Max. axle load: 1850 kg; steered Rear axle 1: Dual tires; Max. axle load: 2800 kg Weights Unladen weight: 2,280 kg Payload: 1,220 kg GVWR: 3,500 kg Functional Tail lift: D'HOLLANDIA DHLM10, tailgate, 1000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 03/2027 Technical condition: good Optical condition: good

Condition: new, Year of construction: 2026, Perfect-2 1350 RED-L Wide belt sanding machine incl. sanding version for intermediate sanding of coatings Special price for showroom machine - in-house trade fair machine - - Robust, space-saving W-wide belt sanding machine for the highest demands. - Constant working height thanks to adjustable upper part - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level can be adjusted continuously according to a sanding grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit can be tilted 10 degrees - Parallel, spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 kW and 11 kW, 400 volts, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Belt tension, control and oscillation are pneumatic - Compressed air consumption approx. 2 l/min Nsdpfx Acsk Dpp Sj Telc - Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum device for the entire work table with additional perforations of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Over-thickness protection for workpieces with feed emergency stop and lifting mechanism - Continuously adjustable chip removal rate - Electronic feed control on the control panel, continuously adjustable from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Pass height 210 mm up to 18.5 kW - Sanding belt dimensions 1350 x 2000 mm Perfect - Equipment: High-quality, swiveling acrylic glass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and saving of sanding pad elements - Electronic compensation of sanding belt grit size - Operating and running hour counter Coating equipment: - Continuously adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included in the machine: Foldable outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, Combination machine, 4-in-1, HOLZKRAFT CU 410c F 26 N Tersa -- Technical data -- - Circular saw - Reach 2,600 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 100 / 79 mm Max. rip width to the left of the saw blade 2,310 mm Cutting width with parallel guide 900 mm Saw blade tilt 90° - 45° - Jointer - Working width 410 mm Jointer table length 1,660 mm Cutterhead diameter / number of knives 72 mm / 3 pcs. - Thickness planer - Table dimensions 410 x 605 mm Min./max. working height 3 / 230 mm Max. chip removal 4 mm Feed rate 7 m/min - Table router - Usable length of spindle 100 mm Max. tenoning tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 6,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter, saw blade guard 60 mm - Special offer price - Location: In stock, 54634 Bitburg Nsdpfod Dtc Tex Ac Tjlc

Condition: excellent (used), Year of construction: 1984, Working width 600 mm Planing height 200 mm Jointer table length 2100 mm Number of planer knives: 4 pcs. Feed speed 7 + 14 m/min. Machine weight approx. 1100 kg - Aigner auxiliary fence on the jointer fence - Machine stand in cast iron design - Thicknessing table with 4-way guide - Handwheel adjustment - Bridge guard Nedpfxey Db Rxo Ac Tjlc Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Extension table with angle-adjustable telescope stop with degree grid division Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Drive power Scoring motor 0.55 kW Main motor 2 x 5.0 kW Nlsdsd Hx Hmepfx Ac Tec Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 16,000 kg, maximum load weight: 14,100 kg, empty load weight: 1,900 kg, loading space volume: 11 m³, loading space width: 2,420 mm, loading space length: 5,500 mm, loading space height: 800 mm, Dear Sir or Madam, We offer for sale, from our own production, brand new roll-off tipper bodies with steel side panels. The tipper body features the following: - Manufactured according to DIN 30722-1 - Mounting bracket, 50mm diameter - Hook height 1570mm Nlodpfxszbaaxj Ac Toc - Body usable length 5,500mm - Body usable width 2,420mm - Body internal height 800mm - Front panel height 1,600mm - 5mm floor plate - Plates and profiles continuously welded - The steel parts are automatically sandblasted before processing to optimize further processing and corrosion resistance - The outer frame profiles are made of reinforced S-335 steel - All steels sourced from Thyssen Krupp, including certificate - Laterally spring-relieved steel side panels with 3mm steel thickness - Due to the spring relief, the side panels can be moved laterally with one hand, making them very easy to handle during operation - Drive-over & spring-relieved rear gate - Outer rollers are lubricatable and replaceable - 4 pairs of recessed lashing hooks in a multilock rail with a tensile force of 2,500 kg each - Front side: 2 lashing rings with 7,000 kg tensile force each - Rear side: 2 completely recessed 5t lashing eyes - Stable design - Warning marking according to §32 (1) StVO & DIN 67520 - Total weight 16,000 kg - Tare weight approx. 1,900 kg - Payload approx. 14,100 kg - Complete zinc phosphate primer - 2K coating in RAL 7016 - Incl. type plate & container testing according to DGUV rule 114-010 (formerly BGR 186) - Immediately available - Unit price €6,800.00 plus 19% VAT - Also available in other usable body lengths (4.5m / 5m / 6m / 6.5m) Delivery throughout Germany possible for an additional charge! If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sale excepted.

Condition: used, mileage: 1,355,000 km, power: 355 kW (482.67 HP), first registration: 11/2018, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,600 mm, Year of construction: 2018, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Information in English: DAF XF 480 FAR SSC EURO 6 6X2 TOP CONDITION NL TRUCK Nsdpfxoynxawj Ac Tslc Box: Cool / Freeze / Flowers Frigo Martini Ebo Rhoon 2018 Lift: 2,000 kg Dhollandia 2018 Refrigeration: TRS Carrier Iceland, temperatures from -30 to +30 degrees First registration: 03/2018 APK: 03/2026 (NEW) Mileage: 1,355,000 km Engine Power: 353 kW (480 HP) Transmission: Automatic Dimensions (lxbxh): 815 x 250 x 275 cm (internal) Own weight: 13,940 kg Loading capacity: 14,060 kg GVW: 28,000 kg GCW: 50,000 kg Colour: White, Original colour (H3279 Brilliant White) Suspension: Front leaf, axles 2 and 3 air Emission class: Euro 5 Axle configuration: 6X2 Tyres front: 385/65 R22.5 L50% R50% Tyres axle 2: 295/80R22.5 L80% R80% Tyres axle 3: 385/65 R22.5 L40% R40% Cabin type: Super Space Cab Extras: Automatic transmission, MX Engine Brake, Parking Air Conditioning, Parking heater, Refrigeration, Camera, Cruise control, 2 beds, Radio/CD player, TRS Carrier Iceland Refrigeration, Temperatures controlled between -30 and +30 degrees Celsius, 1,500-liter diesel tanks complete with Dutch, German, and Italian Certificates, Fully insulated box built in 2017, Robust and in perfect condition, 5x Stainless steel load lock rails in floor and ceiling including 5 bars, 1x horizontal load lock rail, Many extra lights, Fully Pneumatic Rockinger Trailer coupling, Lift axle, ABS, EBS, Complete service history available, Comes directly from first owner, Directly available and ready for work, Box is large enough for 26 CC (Danish Trolleys), 16 normal pallets or 20 Euro pallets, etc. TOP CONDITION NL TRUCK MAINLY USED FOR LONG DISTANCE TRANSPORT VERY WELL MAINTAINED MULTIPLE UNITS IN STOCK CAN BE SUPPLIED WITH: DRACO FRIGO TRAILER COOL FREEZE FLOWERS Box: Cool / Freeze / Flowers Frigo Martini Ebo Rhoon Make and type chassis: Draco MZS 218 Refrigeration: TRS Carrier Iceland First registration: APK: 2026 FRC ATP: - Inside dimensions (lxbxh): 750 x 250 x 290 cm (internal) Drawbars adjustable length: 40 cm Empty weight: 6.0 kg Loading capacity: 11,960 kg GVW: 18,000 kg Lift: Dhollandia 2,000 kg lift. Year of manufacture 2021!! Suspension: Air suspension Axles: SAF axles with disc brakes Tyre size: 445/45 R19.5 Tyre profile axle 1: L30%, R30% Tyre profile axle 2: L30% R30% Spare tyre trailer 445/45 30% Extras: Adjustable draw bar in length (40 cm), Dhollandia 2,000 kg lift (Renewed in 2021!!), ABS, EBS, SAF axles with disc brakes, 2 Toolboxes, Fully insulated box built by Martini, 5x stainless steel rails in floor and ceiling, 1x horizontal load lock rail, FrigoBlock Refrigeration (Runs on 380V or on the refrigeration of the truck), Extra lights, rear doors, rear bumper, Ferry connections, 2x spare tyres, Complete service history available, Directly available and ready for work, Box is large enough for 24 CC (Danish Trolleys), 14 normal pallets or 38 Euro pallets, etc. Refrigeration unit brand: Carrier Further information: * Payload: 14,520 kg * Maximum axle load | First axle: 9,000 kg * Maximum axle load | Second axle: 11,500 kg * Maximum axle load | Third axle: 7,500 kg * Wheelbase: 645 cm * Lift axle | Third axle: Yes * Driven | Second axle: Yes * Position | First axle: Front * Position | Second axle: Rear * Position | Third axle: Rear Further equipment: * 9-ton front axle * 27 MC / CB * Aluminium fuel tank * Anti-lock braking system * Automatic air conditioning * ...

Condition: used, empty load weight: 8,563 kg, maximum load weight: 30,437 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2016, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | KRONE SD Cool Liner | Carrier 1350 aggregate | Lift axle | Pallet box | Krone axles with disc brakes | Tool box | approx. 9,520 diesel hours | Tires 385/65R22.5 Errors, input and advance sales reserved. Nedpfxev An A Te Ac Tolc

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 Nedpfozcmcvex Ac Tslc POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: new, Year of construction: 2025, functionality: fully functional, New, unused, double-sided contact sanding/calibrating line GIANTWAY 1350 TOP BOTTOM, model year 2025, immediately available in stock. Sanding and calibrating panels from the top and bottom in a single pass – suitable for the furniture and panel industry. It consists of a lower unit BDG 1300 K-R-RPA BOTTOM and an upper unit BFG 1300 K-R-RPA TOP, each with three units: a spiral head for calibrating and two sanding rollers. Automatic thickness positioning via a programmer. Includes two roller conveyors (4000 and 6000 mm) with a frequency converter. Main technical data: Working width: 40–1300 mm Working height: 10–140 mm (lower) / 10–100 mm (upper) Belt speed: 0–19 m/min Sanding belt: 1330 × 2200 mm Spiral head: 9 spirals, 450 pads, 2940 rpm Connected power: 69.24 kW (lower) / 64.35 kW (upper) Required extraction flow rate: 25–30 m/s Nodpfxezcwpgj Ac Tolc Weight: 6800 kg + 7660 kg

Condition: new, functionality: fully functional, machine/vehicle number: NEW-19, maximum load weight: 1,105 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 205 133 1350 2 NEW VEHICLE Internal dimensions: 205 cm x 133 cm Sidewall height incl. railing: 43 cm Nljdpfxjrk Ik Hs Ac Tec Loading platform height: 52 cm Gross weight: 1350 kg Payload: 1100 kg Braked single-axle low-loader Overrun brake and handbrake by AL-KO 1350 kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15 mm thick, robust phenolic plywood sidewalls Steel railing Rear drop-down/removable tailboard with tension locks 15 mm thick, slip-resistant, robust phenolic plywood floor Jockey wheel 6 lashing eyes with 400 kg traction force 14" reinforced C-type tyres M+S tires Mesh/rope hooks on the frame 13-pin plug Front marker lights Rear lights with reversing light, fog light and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026: - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Folding and removable front board - Loading ramps - SARIS light alloy wheels - Complete LED lighting - Anti-theft lock - Fine or coarse-mesh net - H-frame - Mesh sides in various heights, also available closed - Flat tarpaulin with or without bows - Raised tarpaulin 120 cm - Rear supports Additional accessories available on request! Plus freight to Gera and vehicle registration documents: €100 net. Images are for illustration purposes and may show optional accessories subject to surcharge. Haven't found the right trailer yet? We have 50–100 vehicles permanently in stock and ready for immediate pickup. Our workshop operates weekdays from 8:00 am to 5:00 pm for all kinds of repairs. Axle repair specialist, including for caravans. Large selection of rental trailers available. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come by directly.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: A50729/RC1, working width: 1,350 mm, Equipment: documentation/manual, SECOND-HAND WIDE BELT SANDER COSTA MOD. AK-CCCT 1350 - CE RULES - Working width 1350 mm - S/N A50729/RC1 - Year 2005 Nsdpfxozcl Tae Ac Tolc

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Nljdpfx Acoy Naq Us Tjc Working height or feed table height: 900 mm Location: Nattheim

Condition: used, Year of construction: 2008, machine/vehicle number: MBI20, Used Packaging Monoblock TMG COMBI 3000 BPHTechnical Specifications & Performance DataThis Casepacking Monoblock is engineered for secondary packaging of bottles with integrated erecting, packing, partition inserting, and sealing in a single compact frame. Manufactured by TMG, model COMBI 15 N-DA, this second hand unit is optimized for beverage production and industrial packaging lines that require reliable, continuous operation.Manufacturer: TMGModel: COMBI 15 N-DAYear: 2008Category: Casepacking MonoblockProduction speed: up to 3000 bph (bottles per hour)Carton formats: 6-bottle cartons; 12-bottle cartonsContainer compatibility: Glass bottlesBottle format handled: 1.5LIntegrated sections: carton forming, high-capacity magazine, case packing, automatic partition inserter, top-and-bottom sealingClosure system: adhesive tape (top and bottom)Control system: PLC-managed operationsAdvanced Automation & Control SystemsThe monoblock features PLC-based controls for synchronized operation of each module, ensuring stable throughput and high repeatability across shifts. Automated sequencing coordinates carton erection, bottle grouping and loading, partition insertion, and closure, minimizing manual intervention. The control logic supports quick stops and restarts, fault diagnostics, and consistent performance for demanding production schedules typical of a used bottling line.Centralized PLC control for all stationsAutomated timing and interlocks between modulesConsistent, repeatable handling for glass packagingDesigned for efficient format adjustments between 6 and 12 bottlesProduction Line Integration CapabilitiesThis monoblock integrates seamlessly into beverage production environments, upstream of palletizing. It can operate inline with conveyors from filling, labeling, and inspection equipment or as a standalone packaging center with infeed and outfeed conveyors. The integrated high-capacity magazine ensures continuous supply of cartons, while automated case closing with tape simplifies downstream logistics.Inline or standalone operationHigh-capacity carton magazine for extended autonomySuitable for wine bottling and other glass-based productsHandles 1.5L bottles; adaptable to 6 or 12 bottle case patternsMachine Condition & Maintenance HistoryThis second hand Casepacking Monoblock is presented in used condition and suitable for integration into an operational packaging line. Built in 2008, it aligns with industrial packaging standards of its generation and is configured for glass bottle handling with tape sealing. Its PLC-managed design supports reliable operation and straightforward maintenance routines typical of robust TMG engineering.Operational Performance & VersatilityDesigned to protect premium products such as sparkling wine, the monoblock combines precise bottle loading with automatic partition insertion for... Nlodszb Ikrspfx Ac Tjc

Condition: used, mileage: 43,168 km, power: 55 kW (74.78 HP), fuel type: diesel, gearing type: mechanical, first registration: 05/2018, color: white, Colour: White, Commercial Vehicle Peugeot Partner Mix Combi, COLOUR: WHITE, YEAR: 2018-05, KM: 43,168, GVW: 2,210 kg, ENGINE CAPACITY: 1,560 cc, Euro 6, FUEL: Diesel Nedeytlufspfx Ac Tjlc

Year of construction: 2018, condition: used, We offer this used MKN HansDampf AutoChef convection-steam oven, manufactured in 2018. Manufacturer: MKN Model: HansDampf AutoChef Serial number: 12345 Year of manufacture: 2018 Supply voltage: 400/230 V Frequency: 50 Hz Connected load: 32 kW Fuse rating: 63 A Maximum steam pressure: 2.5 bar Includes loading trolley Equipped with automatic cleaning mode Nedpfx Ajzbyqkec Tjlc 2 units available. If you have any questions or require further information, please send a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Palletizer and wrapper in a Comi machine for sale. The machine is currently operating flawlessly in a potato packing facility. It will be available from July 2026. Nodpfxsx Nh Tqo Ac Telc

Condition: used, Year of construction: 2022, operating hours: 485 h, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 20.590 kg Lifting capacity: 450 kg Nledpfjw S Avdsx Ac Toc Rental currency: EUR Please contact KEY-TEC Sales for more information