Used Bakery Work Turntable for sale (51,880)

Condition: used, mileage: 68,972 km, power: 120 kW (163.15 HP), first registration: 06/2019, fuel type: diesel, overall weight: 4,500 kg, wheelbase: 3,682 mm, color: white, gearing type: mechanical, Equipment: onboard computer, power assisted steering, Special features - ABS, ASR - Radio - Cruise control - Power steering - Driver's seat with armrest - Electric windows - Electronic immobilizer - Central locking with remote control - On-board computer - Parking assist Superstructure France Elevateur 152 TPF Aerial Work Platform Crsdpfx Asy Dfxmed Njb - Working height: 14.8 m - Lateral outreach: 8.3 m - Basket capacity up to 265 kg - Slewing angle 400° - Articulating basket arm 140° - 2 x 60° basket rotation - 2 hydraulic outriggers - Plastic work basket (1000 V insulation) - Indicator light for transport position in the driver’s cab - Emergency pump - Operating hours meter - Engine start/stop function - Sine wave power inverter 2500 VA - 230V socket in basket - Single-handed joystick proportional control for hydraulic movements in the work basket - Audible tilt alarm - Flashing beacons The Renault Master is equipped with a professional aerial work platform from the manufacturer France Elevateur, model 152 TPFcc. This platform offers an impressive working height and allows safe and efficient access to elevated areas for maintenance or repair work. All functions of the lift are fully operational and have been inspected by our workshop. The vehicle is ready for registration. German documents, TÜV and UVV certification are included free of charge. Additional features such as trailer hitch, lighting, shelving, and more are available upon request. Available immediately at our branch in Langenfeld. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. The presentation is exclusively with original photos taken in-house – ensuring full transparency regarding the vehicle’s actual condition. Our vehicles undergo thorough reconditioning in our own specialist workshop before sale – including mechanics, bodywork, and painting. They are thus optimally prepared for their next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – control is better: On request, the vehicle can be inspected by independent inspection organizations such as TÜV, DEKRA, or KÜS – also as a remote inspection. Our service offer for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export license plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of special features as requested Looking for something specific? If you can’t currently find a suitable vehicle for your business in our stock, just contact us – we’ll be happy to help. For technical details, more photos, or a personal consultation, please contact us at any time. All prices stated are net prices. The contents of our website are created with the greatest care and updated regularly. Nevertheless, they are for general information purposes only and do not replace individual advice. Only the details contained in the purchase contract are binding. Subject to change, errors, typing mistakes, and prior sale.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display Crjdpfxeykucme Ad Njb F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2021, operating hours: 10 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. MYTHO EASY Low Very low height machine Winding height 2400 mm Turntable 1650 mm LP Flat turntable 30mm flat - 500mm long Max. Load weight: 1200 KG Crjdpfx Asx Ta Nxsd Nsb PowerStretch 200%, changeable by gear wheels 150-200-250% Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: Film clamp on turntable German. Schuko plug 6 programs individually storable Further demonstration units available immediately from stock. Prices ex stock Ludwigsburg

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg Crsdsykuiaepfx Ad Njb · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Credpjykub Ajfx Ad Nob Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2024, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Csdpfx Asu Tk Eted Norb Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Condition: used, first registration: 03/2002, next inspection (TÜV): 03/2027, Equipment: ABS, Export only Sale only abroad SPR 324 Kotschenreuther 3 axles Crodpfx Asy Dmq Dsd Nsb

Condition: excellent (used), functionality: fully functional, mileage: 11,431 km, power: 120 kW (163.15 HP), first registration: 10/2020, fuel type: diesel, empty load weight: 4,050 kg, overall weight: 5,500 kg, fuel: diesel, number of gears: 6, number of seats: 2, total length: 7,400 mm, total width: 2,000 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, airbag, car registration, central locking, electronic stability program (ESP), full service history, onboard computer, power assisted steering, truck registration, We are offering this very well-maintained Versalift VTM-41-150-F truck-mounted work platform, year of manufacture 2020. Manufacturer: Versalift Model: VTM-41-150-F Crjdpoy D Tarsfx Ad Njb Year of manufacture: 2020 Operating hours: 368 Condition: very good Working height: 14.9 m If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, maximum load weight: 29,340 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2014, next inspection (TÜV): 10/2026, loading space length: 13,600 mm, Year of construction: 2014, Equipment: ABS, * German semi-trailers from first owner, in very good condition * 1st and 3rd axle liftable * Schmitz axles * Galvanized chassis * Side walls, stakes, lashing rings Crodoyr A Awepfx Ad Neb * Tires 385/65 approx. 80% * WhatsApp: * Polish contact, ????? ?????: * Sale only to commercial buyers, without warranty, all information subject to change, interim sale reserved

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2026, overall weight: 35 kg, total length: 700 mm, total width: 1,200 mm, total height: 850 mm, Work Table AT 1200 with Stainless Steel Top and Sliding Doors Cedpfx Adjyhy Imo Norb TOP work table for gastronomy or bakery use Stainless steel worktop Lower storage shelf Stainless steel design with 2 sliding doors Dimensions approx.: 1200 x 700 x 850 mm (W x D x H) Used unit, as new Options: Delivery service New castors / wheels Come and visit us!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, total length: 600 mm, total height: 780 mm, total width: 1,600 mm, Work Table AT 1600 with Stainless Steel Top Premium gastronomic/bakery work table Stainless steel worktop with rear upstand (gallery) Cjdpfx Adeyhy Nks Njrb Lower storage shelf Approx. dimensions: 1600 x 600 x 780 mm (W x D x H) Used unit, cleaned Option: Delivery service New castors / wheels Come visit us!

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2026, overall weight: 49 kg, total length: 600 mm, total width: 500 mm, total height: 850 mm, Worktable AT 500 Drawer Cabinet Credpfx Adsyhy H Ao Neb TOP worktable for gastronomy or bakery use Stainless steel worktop Cabinet enclosed on 3 sides Stainless steel construction with 3 drawers Drawers with integrated handle strip Approx. dimensions: 500 x 600 x 850 mm (W x D x H) Used unit in like-new condition Option: Delivery service New castors / wheels Visit our large showroom!

Condition: good (used), functionality: fully functional, Bakery Refrigerator Liebherr BKPv 6570 Stainless steel design For trays 600 x 400 mm Digital temperature display Adjustable temperature range: -5 to 15°C DGUV V3 tested exclusively by us Connection: 230V Used equipment Visit our large showroom! Codeyhzlmepfx Ad Njrb

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 700 mm, total height: 1,000 mm, total width: 1,600 mm, Work Table AT 1600 with Stainless Steel Top, Mobile Premium Work Table for Gastronomy / Bakery Stainless steel work surface Open bottom / accessible underneath Reinforced, welded construction Approx. dimensions: 1600 x 700 x 1000 mm (W x D x H) Used unit, cleaned Option: Cjdpjyhy Hijfx Ad Nerb Delivery service New castors / wheels Visit our large warehouse!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, overall weight: 55 kg, total length: 700 mm, total width: 1,880 mm, total height: 850 mm, TOP work table AT 1880 with stainless steel top Work table for gastronomy/bakery Stainless steel worktop Lower storage shelf Reinforced welded construction Crjdpfx Adjyhy E Ss Nsb Approx. dimensions: 1880 x 700 x 850 mm (W x D x H) Used unit, cleaned Option: Delivery service New castors/wheels We have many more work tables in stock!

Condition: new, Year of construction: 2025, table diameter: 1,000 mm, – Horizontal capacity: 1200 kg Crjdpfsliftnox Ad Nsb – Vertical load capacity: 600 kg – Table size: 1000 mm – Electrically tiltable – Cable remote control – Digital display – Documentation – 400V

Condition: ready for operation (used), Year of construction: 2007, A Haulotte mast lift is available. Working height: 10m, platform height: 8m, outreach: 3100mm, load capacity: 200kg, max. side force indoors/outdoors: 40kg/20kg, slewing range: 345°, max. inclination: 3°, basket dimensions X/Y: 680mm/930mm, lifting mast: 4950mm, max. wind speed: 45km/h. Machine dimensions X/Y/Z: 2700mm/1000mm/2000mm, weight: approx. 2800kg. An on-site inspection is possible. Credey Dupuopfx Ad Neb

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis: * Steel-welded construction with welded longitudinal beams and through Z-cross members, close cross member spacing for high floor load capacity * Ramp storage between longitudinal beams behind the axle assembly under the loading floor. Two insertion pockets for one ramp each, with closure plate on the rear headframe Underride protection: * According to EU regulations Landing legs (front): * Landing legs with single-side operation Support (rear): * Two adjustable drop supports Axles: * 2 x 10 t air suspension axle units, manufacturer SAF, drum brakes approx. 300 x 200 mm, centered wheel mounting for twin tires, ABS, total air suspension stroke approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), control via hand lever with latch function Tyres: * 8x, 235/75R 17.5 – manufacturer of our choice, on steel rims 6.75 x 17.5, mounted with ET Spray protection: * Made of PVC in front of and behind the axles, according to EU regulations Load securing: * Outer frame with one hole every approx. 150 mm for tension straps, lashing force approx. 2.5 t (lashing straps can be fastened with sideboards closed, chamfered outer frame) * 6 pairs of foldable lashing rings, evenly spaced, tensile force approx. 8 t. * Stake pockets for removable stanchions 80/50: 3 pairs in the outer frame, evenly distributed Brake system: * Compressed air brake system in accordance with EU regulations with EBS * Two coils as a connection to the truck with red/yellow coupling heads * Spring-actuated parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor, recessed in the outer frame Crjdpsy Auhbofx Ad Nob Front wall: * Removable from 25 mm high sideboard Lighting system: * Lighting equipment in accordance with EU regulations, 24 volts, multi-chamber rear lights, license plate lights, side marker lamps, and tail marking lights at the rear. Connection panel on the left of the towing bar, including connection cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with holders * Plug-in beacon at the rear * Additional 40 mm drawbar coupling (max. gross weight 13,500 kg) * Rear extension by approx. 800 mm incl. underride protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolted towing eye approx. 50 mm as per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 removable stanchions made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20’ container * 1 x 20’ extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 * 1 pair aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 x 25 mm sideboards and rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm), including sideboard storage at the front near the headboard Paintwork: * Chassis shot-blasted, cleaned and premium hot-dip galvanized according to latest technology * Body components cleaned, primed and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 3002 carmine red * Sideboards: RAL 3002 carmine red * Kinnegrip stanc

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: Credpfey Auhzjx Ad Nob * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, maximum load weight: 38,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, Our complete vehicle inventory, including immediately and shortly available vehicles, can be found on our website. Selection of features. Complete equipment details upon request. EQUIPMENT: * Gooseneck, length approx. 4,100 mm, with central beam * Extendable load area, length approx. 9,400 mm, with 350 mm x 10° rear bevel and integrated hook-in rail for use with separate aluminum loading ramps * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the selected platform length * Technical fifth wheel load: 18,000 kg * Suitable for tractor units: 4 x 2 and 6 x 2 * TPMS Tire Pressure Monitoring System in accordance with ECE R 141 Crsdpfx Aoy Augdjd Nsb * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lift/lower valve * 235/75 R 17.5 3PMSF twin tires, manufacturer of our choice * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (without supply connections installation on the tractor unit) * 4 pairs of recessed lashing rings in the outer frame of the gooseneck: - The first three pairs are flat (LC 10,000 daN) - The rear pair is fold-out (LC 10,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank; JOST Modul B, static test load approx. 50,000 kg * Wooden flooring approx. 32 mm thick, framed in aluminum omega profiles on the gooseneck and platform * 10 pairs of recessed, flat-mounted, foldable lashing rings in the outer frame of the load area * One pair of lashing rings (LC 10,000 daN) in front of the last axle and at the end crossmember of the trailer * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the outer frame of the load area for plug-in stakes approx. 100 x 50 mm * 1 spare wheel holder under the load area, right side when facing forward * 1 lockable stainless steel (INOX) toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the left when facing forward * Rear crossmember with bevel approx. 350 mm x 10° * Integrated hook-in rail for loose aluminum loading ramps at the rear crossmember * 1 pair of drop-down supports at the rear crossmember * Steering override from front and rear via cable remote control with single-track axle monitoring (no installation on tractor unit) * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 1 LED work light on both left and right of front bulkhead, wired to the tractor unit’s connection rail * Locking positions at each 500 mm on the extension * Internal holder for stakes not in use, mounted to the inside of the gooseneck bulkhead * 4 wheel chocks with holder under the load bed * Galvanised extension sections for platform widening by approx. 230 mm per side (without wooden planks) * 1 LED work light on both left and right in front of the axles, wired to the connection rail for the tractor unit * 2 axle load gauges mounted on the left side, including axle load diagram * 1st axle with traction aid * Mountings for warning signs under the gooseneck as well as left and right at the rear crossmember * Acoustic warning signal when reversing * EU reflector at the rear of the vehicle

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, total width: 2,480 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Below is an excerpt from the equipment. Full specification available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched-through Z cross members; close cross member spacing for high floor load capacity * Ramp holder: Between the longitudinal beams, behind the axle assembly, under the loading floor, two slide-in pockets for loading ramps (one per pocket), with cover plate in the rear head frame Underrun protection: * In accordance with EU regulations Landing legs: * Front: landing legs with single-sided operation * Rear support: two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, brand SAF, approx. 300 x 200mm drum brakes, center-bored for twin tires, ABS, total air suspension lift approx. 200mm (of which raise approx. 140mm, lower approx. 60mm), manual lever control with detent function Tyres: * 8 units, 235/75 R17.5 - brand of our choice. Mounted on 6.75x17.5 rims with offset Splash guards: * PVC splash guards in front of and behind the axles as per EU regulations Load securing: * On the outer frame, boreholes for lashing straps at approx. every 150 mm, lashing capacity approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * Stake pockets for 80/50 insert stakes: 3 pairs on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EU regulations with EBS * Two coils as coupling to the truck, red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z hardwood floor recessed into the outer frame Lighting system: * Lighting system according to EU standards, 24 Volt, multi-chamber rear lights, license plate lights, side marker and lane departure lights at the rear, connection plate left at the drawbar, including connecting cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holders * Detachable flashing beacon at the rear * 40 mm towing device supplied (GVW max. 13,500 kg) * Rear extension approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable rigid drawbar in length, 6 x approx. 100 mm increments, with bolted 50 mm towing eye per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed Csdpfxsy Auf To Ad Njrb * 12 galvanized pipe insert stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20' container * Container locks 1 x 20' extendable to approx. 2,820 mm, compliant with ISO 1496, EN 284 or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technological standard * Body components cleaned, primed, and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 9011 graphite black * Outer frame: hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Fittings: galvanized / KTL black

Condition: used, machine/vehicle number: 8308, mileage: 191,919 km, power: 158 kW (214.82 HP), first registration: 04/2018, fuel type: diesel, overall weight: 11,990 kg, tire size: 245/70R17.5, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: air conditioning, airbag, central locking, differential lock, electric window regulation, onboard computer, power assisted steering, Special features - Electric windows - Radio - ABS / ASR - Rearview camera - Differential lock - Air conditioning - Power steering - Central locking - Fog lights - Air-suspended driver’s seat Superstructure France Elevateur 192 CPM Aerial Working Platform - Working height: 19 m - Lateral outreach without outriggers: 7.5 m - Lateral outreach with outriggers: 11.8 m - Basket load: 265 kg / 2 persons With 220V power socket With compressed air connection 2 water connections: one with 24V electric pump, 2.7 bar; the other a high-pressure connection with petrol-powered pump, 200 bar. - Tower rotation: 400° - 4 hydraulic outriggers and 2 hydraulic rear axle stabilizers - Maximum operating inclination (slope): 5% - Maximum lateral inclination: 15% - Fully insulated fiberglass basket (1000 V) - Steel boom with 2 telescopic sections - Articulated pendulum arm 180° - Emergency operation (remote control) in the cabin - Inclination alarm (tilt sensor) - Basket rotation: 2 x 90° - Operating hours counter - Emergency pump Body features - Tool shelves - Stainless steel water tank 200l - Sine wave inverter 2500VA - Quick coupling for compressed air - Vice - 220V socket Renault D12 with France Elevateur 192 CPM aerial platform, mounted on a 12-ton truck, suitable among others for the facade cleaning industry. The basket is equipped with a high-pressure water pump, petrol-engine driven, 200 bar, as well as a second water connection with 24V electric pump, 2.7 bar. There is also a compressed air connection in the basket. All functions of the aerial platform are fully operational and have been checked by our workshop. The vehicle is ready for registration. German paperwork, TÜV, and UVV certificates are included free of charge. Additional features such as trailer hitch, lighting, shelving, and more are available upon request. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles All vehicles we offer are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photos, taken directly at our premises – ensuring full transparency regarding the actual condition of the vehicle. Prior to sale, our vehicles receive comprehensive preparation in our in-house specialist workshop – including mechanical, body, and paint work. This ensures they are optimally prepared for the next technical inspection. We also guarantee the authenticity of indicated mileage. Credpjy Av N Tjfx Ad Nsb Trust is good – inspection is better: On request, the vehicle can be inspected by independent organizations such as TÜV, DEKRA, or KÜS – also available as remote inspection. Our range of services for you: - Delivery of your vehicle to your chosen location - Complete processing of export formalities, incl. export license plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of special equipment as required Looking for something specific? If you currently cannot find a suitable vehicle for your business in our inventory, please contact us – we are happy to assist you.

Condition: used, mileage: 84,553 km, power: 90 kW (122.37 HP), first registration: 07/2013, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 03/2027, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,740 mm, total width: 2,220 mm, total height: 2,915 mm, Equipment: ABS, crane, soot filter, Renault 120 DXI Palfinger Steiger P260B 4x2 Self-propelled work platform Suspension: leaf spring Wheelbase: 3.90 m PALFINGER Type: P260B Year: 2013 4x hydraulic extension 4x hydraulic outriggers 2x work baskets Crodpfx Aoy Aqf Njd Nsb + emergency controls Equipment: - 3 seats - Radio-CD-DVD-AV-USB - Electric windows We are happy to assist you with financing/leasing through our partners. All information is provided without guarantee. Subject to errors and prior sale.

Condition: used, maximum load weight: 2,150 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 02/2022, total width: 2,150 mm, total height: 890 mm, Temared trailer Winch 3 axles First registration / Year of manufacture: 17.02.2022 / Vehicle type: Semi-trailer Body type: Platform KBA No. (HSN/ TSN): 1897//000 Paint color: Silver Number of previous owners: 1---- The vehicle is unprepared! Nationwide delivery available for an additional charge. Crjdpsy Dyz Aofx Ad Nob Errors and prior sale reserved. We are happy to take your vehicle in part exchange. Financing / leasing also available with no down payment! Do you have questions? We are happy to advise you!

Condition: used, functionality: fully functional, Year of construction: 2017, OMME Trailer Work Platform OMME 1050 E — Year of manufacture 2017 Csdpfxsy A E D Te Ad Nsrb Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 15,100 plus VAT | EXW Einbeck | Delivery upon request