Used Bear Ar40 for sale (2,993)

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable Crsdpfx Ajfgyh Todroh - Quick release vice - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission Cedpfx Aofgyicodrjrh · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm Credpfx Adofgyifjroh total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed Csdpfx Adsfgyigjrjrh vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction Cjdpfxsfg E Hmj Adrerh of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Cedpsfg E H Sofx Adrjrh Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: good (used), PUMP AND VALVE ASSEMBLY FROM A WOOD TREATMENT AUTOCLAVE For sale, a complete pump assembly originating from an industrial wood treatment plant using an autoclave. The set was used in a vacuum-pressure wood treatment plant. The assembly includes, among other things: - a large industrial pump with an electric motor, - an additional vertical pump, - process tanks, - an extensive piping system, - flanged valves, - pneumatically controlled valves, - automation and control elements, - sensors and measuring equipment, - a steel support frame. Cedpez Hrnbsfx Adrsrh The entire assembly is a component of the technological installation of the autoclave for wood treatment. This type of system is used to carry out the individual stages of the impregnation process, including vacuum creation, transport of the impregnating agent, and the pressure phase. In industrial impregnation plants, separate vacuum pumps, pressure pumps, and circulation/transfer pumps are used. The components bear markings indicating the manufacturers of the individual parts, including Sulzer and Actreg/Actreg Valves. Used, industrial condition. Visible signs of use, wear on the paint coating, and localized surface corrosion. Sold as seen in the photos. Individual components are not sold separately – the offer applies to the entire assembly shown. Inspection is possible on-site before purchase. Due to its size and weight, collection is required or transport must be arranged by the buyer.

Condition: new, range L-W-H 1830x510x1860 mm weight 195 kg 15 St. weight max. in kg 700 kg Professional workbench / tool trolley Dimensions of the right 3 upper drawers 41.5 x 39 x 8 cm. Dimensions of the right 4th drawer 41.5 x 39 x 15 cm. Dimensions of the right 5th drawer 41.5 x 39 x 23 cm. Cedpfxou Imfhj Adrsrh Dimensions of the middle 3 upper drawers 83.5 x 39 x 8 cm. Dimensions of the middle 4th drawer 83.5 x 39 x 15 cm. Dimensions of the middle 5th drawer 83.5 x 39 x 23 cm. Dimensions of the left 3 upper drawers 41.5 x 39 x 8 cm. Dimensions of the left 4th drawer 41.5 x 39 x 15 cm. Dimensions of the left 5th drawer 41.5 x 39 x 23 cm. Dimensions of the back wall 183 x 46 cm. Dimensions of the closets 183 x 30 x 46 cm. Dimensions of the shelf 22.5 x 63 cm. Wheel diameter 150 mm. Maximum capacity of the wheels 175 kg. Per bike. (700 kg total) Maximum capacity per tray 30 kg. Dead weight 195 kg. Overall dimensions 198 x 51 x 186 cm. Packaging dimensions 190 x 60 x 95 cm. Equipped with 4 high-performance steering wheels, 2 of them with brakes. All drawers are equipped with non-slip mats. The open compartment and the drawers can be locked separately. Solid wood worktop 4 cm thick. Solid pullouts with ball bearings (double bearings)

Condition: used, functionality: fully functional, Year of construction: 2021, overall weight: 4,850 kg, Equipment: front power take-off, Manufacturer: Krone Model: Swadro TC 1250 Year of purchase: 2023 Used, with signs of wear, good condition Important information: A functional video can be sent upon request. Technical data according to the manufacturer: Four-rotor center-delivery rake Working width: 9,800 - 12,500 mm Swath width approx. 1,400 - 2,200 mm* Transport width approx. 2,990 mm Transport height: approx. 3,990 mm Weight approx. 4,850 kg (base machine) Rotor diameter: Front: 3,300 mm, rear: 2,960 mm Cedpfoz Hvldsx Adrorh Eleven tine arms in front, 13 tine arms in the rear Max. PTO speed 540 rpm Power requirement approx. 59 kW (80 hp) Required hydraulic connections: 1 x single-acting, 1 x double-acting Standard equipment: Mounting Two-point mounting bracket (Cat II) incl. pivoting suspension via ball joint and roller Two-leg support Drive train Rotor gearbox with maintenance-free grease filling, completely hardened KRONE Dura-Max cam track KRONE Easy-Line drive concept (front rotor pair rotates approx. 25% faster than the rear) Rotors individually protected by overload clutch PTO shaft, wide-angle joint on one side, 1 3/8", Z=6 Drive train with freewheel Rotors + rotor chassis Cardan rotor suspension incl. Krone Jet effect, mounting of the tine arms by means of maintenance-free ball bearings Four 10.5 mm trailing double tines per arm with a large coil diameter and "lift effect" Tines mounted to prevent loss around the tine arm Rotor height adjustment by hand crank incl. rotor height indicator Easy operation via hydraulic control unit, incl. follow-up control of the rotors Hydraulic relief of the front rotors, spring relief of the rear rotors Four-wheel rotor chassis incl. four trailing feeler wheels Rotor tires: 4 x 16x6.50-8 each Additional equipment: Warning signs and LED lighting Operation via pre-selection control box and tractor-side control valves additionally with: - Tires Vredestein Flotation 500/50 R 17 - Middle swath curtain (hydraulically pivoting) - Hydraulic single-rotor lift via pre-selection switch box (electric) (lifting of the front rotors) including paired lifting of the rotors + 1 single-acting hydraulic valve

Condition: used, saw blade diameter 400 mm capacity 90 degrees: round 110 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 200x60 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 140x60 mm total power requirement 1,5 kW weight of the machine ca. 130 t dimensions 0,8 x 0,7 x 1,3 m SPECIAL PRICE!! Underfloor aluminum circular saw, hydropneumatic semi-automatic. Codpfx Adod Iinxororh · Maintenance unit for pneumatic control · Turntable with ball bearings · Suction nozzle for chip extraction system · 2 pneumatic vertical clamps · Rotation range 180° · Movable rear material stop = enlargeable cutting area · Saw blade feed continuously adjustable · Two-hand safety control Horizontal vices (option) · Mist spray device for cooling emulsion · Engine braking · Machine base · The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary . Optional saw blade

Condition: ready for operation (used), Year of construction: 1989, total width: 4,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 140 mm, product length (max.): 2,000 mm, number of axes: 2, This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information. Credpfex Enapex Adrjh Retroffited & Overhauled in 2021/22 Working range: • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 500 mm: 140 mm • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 630 mm: 80 mm • Minimum workpiece diameter that can be ground: 3.5 mm • Maximum workpiece length for through-feed grinding: 200 mm • Maximum workpiece length in plunge grinding 245 mm • Maximum grindable profile depth on the workpiece 25 mm Grinding wheel: • Maximum outer diameter 500 or 630 mm • Minimum outer diameter 380 mm • Maximum grinding wheel width 250 mm • Grinding wheel bore 305 mm • Guide wheel: • Maximum guide wheel outer diameter 315 mm • Maximum guide wheel width 250 mm • Bore diameter 127 mm Power requirements: • Power consumption approx. 33 kW Additional equipment • Optional: Additional equipment available Machine Benefits Technical Machine Benefits • Hydrodynamic axis bearing • Regular maintenance during series production

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Cedpfezp Nt Aex Adrerh Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1980, functionality: fully functional, grinding length: 5,000 mm, grinding wheel diameter: 750 mm, grinding diameter: 580 mm, workpiece weight between centers: 4,000 g, Used Gioria RU/S 5000 External Cylindrical Grinding Machine – High-Precision Grinding Technology for Large Parts Available from August 2025 – Viewing under power possible! This robust and precise Gioria RU/S 5000 external cylindrical grinding machine was developed for machining workpieces up to 5,000 mm long and 4,000 kg in weight. With its hydrostatic grinding spindle bearings and a powerful 20 kW drive, it offers the highest precision and excellent grinding results – ideal for use in heavy-duty machining and the production of high-precision components. 🔹 Key Features: ✔ Max. grinding diameter: 580 mm ✔ Grinding length: 5,000 mm ✔ Workpiece weight: up to 4,000 kg ✔ Hydrostatic grinding spindle bearings for vibration-free operation ✔ Large grinding wheel diameter 750 mm for efficient material removal ✔ Continuously adjustable workpiece spindle speed (10–180 rpm) for optimal adaptation to different workpieces ✔ Hydraulic table drive (0.05–4.0 m/min) for precise longitudinal movements ✔ Digital display for the X-axis for exact feed Powerful features for maximum efficiency The machine is equipped with extensive accessories, including: ✅ Coolant cleaning system with paper belt filter (tank capacity: 450 liters) ✅ 6 grinding wheel holders for flexible machining options ✅ 8 steady rests for stable workpiece guidance during long machining operations Components ✅ Dressing device positioned on the tailstock for precise dressing of the grinding wheel Ready for immediate use – viewing available in Stuttgart! This machine is currently still live and can be demonstrated. Further data: Center height 300 mm Center width 5000 mm Max. workpiece diameter 580 mm Max. workpiece diameter with steady rest 30 – 400 mm Csdpfjv Tnhwsx Adrerh Max. workpiece weight between centers 4000 kg Machine taper in the workhead: MT 6 Machine taper in the tailstock: MT 6 Operating voltage 400 V/ 50 Hz Machine weight approx. 20,000 kg Space requirement approx. 13 x 3.5 m Grinding wheel headstock Grinding spindle drive 20 kW Hydrostatic grinding spindle bearing Grinding wheel, max. 750 x 100 x 305 mm Grinding wheel peripheral speed, max. 1 – 34 m/sec. (for wheels Ø 750 mm) Workhead Speed range, continuously adjustable 10-180 rpm MT 6 taper chuck Swivel range +/- 45 degrees Worktable Hydraulic table drive – continuously adjustable 0.05 – 4.0 m/min Worktable swivel range +/- 4 degrees Tailstock Hydraulic quill stroke Quill stroke 90 mm MT 6 center chuck Dressing device positioned on the tailstock Coolant purification system Coolant tank with pressure pump and paper belt filter Tank capacity 450 liters 📍 Delivery: Free on truck from site 📅 Available from August 2025 ⚙ Warranty: None, as this is a used machine Take advantage of this opportunity to acquire a high-quality cylindrical grinding machine for your production. Perfect for large and heavy workpieces – secure this machine now for precise grinding at the highest level!

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Credpfx Asz Ai T Aedreh

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,600 mm, Genox GXC1600T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 110kW Drive Motor with outboard rotor bearings (132kW & 160kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,600mm wide x 660mm diameter cutting chamber with a choice of either a 5 row or 7 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. Crjdez Ai T Nspfx Adreh All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. Crodpfez Ai U Tsx Adreh We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily Crodpfx Adsv T Trujroh clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: used, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,230 kg, color: white, gearing type: automatic, number of seats: 4, total length: 5,570 mm, total width: 1,995 mm, total height: 1,860 mm, loading space length: 2,030 mm, loading space width: 1,840 mm, loading space height: 350 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4030.NW26.SK21231 ---- Errors and prior sale excepted! Conversion to 3-way tipper * Subframe and tilting frame made of lightweight steel profiles, completely hot-dip galvanized * Aluminum sideboards, silver anodized Cedpfx Adoymicaorerh * Folding sideboards, secured with long-travel latches * Folding rear sideboard * 4 ball bearing tilting supports with Durenthan shell, 2 galvanized pins * 20 mm thick rubber pads between subframe and tilting frame * Hydraulic cylinder drive via an electro-hydraulic unit, operable from the cab * Multi-stage telescopic cylinder with nitrided pistons * Underbody protection with lighting SPECIAL EQUIPMENT * Trailer coupling - 13-pole - for 3.5 t trailer load - 90° rear tailgate opening angle - height of the ball head approx. 50 cm (center) * Cargo area protection liner "sprayed", 12-volt connection on the platform * Package: Outdoor Package 2 - engine and tank protection, steel - 100% rear differential lock * Package: Winter 1 - leather steering wheel, heated - front seats, heated * Auxiliary heater, programmable, with remote control FURTHER EQUIPMENT * ABS * Tow hook, front * All-wheel drive, selectable four-wheel drive * Trailer coupling preparation kit * Audio system 44: Ford SYNC 4A * Exterior mirrors, electrically adjustable, heated, with indicator * Exterior mirror housing in vehicle color * Battery management system * Headliner made of woven fabric, light * Overhead console, illuminated * Diesel particulate filter with SCR * Tachometer * Third brake light * ESP (Electronic Stability Program) * Electric windows, front * High beam assistant * Ford Easy Fuel * FordPass Connect incl. eCall and WLAN hotspot * Heated windshield * Floor mats: carpet floor mats, front * Transmission: 6-speed automatic * Grille insert on the fender * Glove compartment with lid * Easy Lift tailgate * Tailgate handle, black * Rear window, heated * Interior mirror, automatic anti-glare * Instrument panel, digital 8 * Air conditioning, front * Headrests (2) * Radiator grille * Paint: Solid color paint * Load securing with protective frame * Steering wheel: Multifunction steering wheel * Steering wheel: Vinyl steering wheel * Center console, front, integrated armrest * Engine cover * Fog lights * Package: Rear seat 18 * Package: Safety Package 2 * Package: Seat 36 * Package: Technology Package 19 * Upholstery: Fabric * Pre-Collision Assist * Wheel Package 9: LM 7.5J x 17, 255/70 R17 * Wheel arch trim * Tire pressure monitoring system * Windshield wipers with rain sensor * Mud flaps, rear * Side sill protection * Selective drive mode switch * Power steering * Start-Stop system * Socket: 12-volt connection in the rear * Rear bumper, painted in vehicle color * Front bumper, painted in vehicle color * Tachograph, digital - preparation * Daytime running lights * Door handles, painted in vehicle color * Traffic sign recognition system * Tie-down eyes, external * Tie-down eyes, internal * Immobilizer * Central locking with remote control ... and more ---- First owner. German version. Errors and prior sale excepted. 2 years factory warranty from registration (can be extended upon request). We will gladly take your vehicle in trade. Financing/leasing also possible without down payment! Do you have any further questions? We would be happy to advise you! Since a deviation of the vehi

Condition: used, Year of construction: 1996, X-axis: 500mm, Y-axis: 380mm, Z-axis: 380mm, B-axis: 180°, C-axis: 360°, max. spindle speed: 15,000rpm, feed and rapid traverse: 30m/min, tool changer: 24-position, tool holder: SK40, control: Deckel Maho MillPlus, spindle operating hours: 7,000h, the original screen is defective, therefore a separate monitor is used, replacement spindle has 7,000h, spindle module and E/R module replaced in 2023, C-axis table bearing repaired in 2023, Z-axis guideways repaired in 2024, hard drive replaced in 2024, without clamping systems or tools, an on-site inspection is possible. Codpfxoz Ea Rno Adrerh

Condition: used, RA1188 Schulz roller curve 90° roller curve conveyor 450-390 IR1220 Manufacturer: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1220 mm Conveying speed: v = 0.35 m/s incl. lateral guides on both sides Roll: Type: G6/50 plain bearing with conical plastic moulding Crodeu Rv U Rspfx Adroh Transport mask: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports 70,00€ per piece Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece Crodpfok Aa Rysx Adrsh RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Credez Iprtepfx Adreh Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Condition: new, Year of construction: 2025, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, Design Design: Bridge measuring machine Guidance system: High-precision air bearing guides Measuring range X-axis: 700 mm Y-axis: 1000 mm Z-axis: 700 mm Accuracy: 1.7 + l/300 Vectorial acceleration: 1732 mm/s² Vectorial velocity: 519 mm/s Probing system Measurement technology: Tactile Type: PH10M / TP20 Equipment Probe changing system: Included Cedpszf H Eusfx Adrsrh

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Crsdpfxevvkipe Adreh

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale is this vertical machining center, including a "Clamex unit" and with few operating hours. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. clearance) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in the X-direction without clamping: X = 1500 mm Max. contour milling dimension in the Y-direction: Y = 985 mm - milling cutter radius Max. horizontal drilling dimension in the X-direction: H = 1168 mm Z-axis travel: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling spindle 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, steplessly adjustable with collet chuck with HSK shank, ceramic ball bearing (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic Max. tool Ø: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position head magazine, swiveling in X and Y direction Crodpez In Ugofx Adroh only for special bevel gear 7869 with HSK holder Vertical spindles individually accessible Arrangement in an L-shape, 5 in the X direction and 4(5) in the Y direction 32 mm pitch Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on the plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 4400 min-1, steplessly adjustable Holder: M 10 thread - pass fit 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in the X direction 1 double drilling spindle in the Y direction Holder: M 10 thread, pass fit 11 mm Total drill length max. 63 mm from the mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing / grooving in the X direction n(max.) 1000 - 5650 min-1, steplessly adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis "CLAMEX" tool set - Includes voucher for 300 pieces + 80 pieces of Lamello connectors Includes original tool set consisting of 2 pcs. P-system slot milling cutters, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling mandrel for P-system slot milling cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling mandrel for P-system slot milling cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P L= 57.5 / shank 10x27 / left 1 pc. Adapter for drills with shank d= 10 mm (left) 1 pc. Collet chuck DIN 6388 form B, double slotted, size 25 Clamping diameter 20, for HSK-F 63 holders