Used Beck Maschinenbau Gmbh Scissor Lifting Table for sale (87,510)

Condition: used, Year of construction: 2007, operating hours: 361 h, lifting height: 6,100 mm, Year of manufacture: 2007 Drive: Wheel Empty weight: 1.860 kg Working height: 810 cm CE mark: yes General condition: average Technical condition: average Visual appearance: average Specification Details Manufacturer Skyjack Model SJ4620 (SJIII 4620) Year of Manufacture 2007 Machine Type Electric Scissor Lift Drive System 24V DC Electric Application Indoor use and level surfaces Certification CE Marked (European version) Performance Specification Details Maximum Working Height 8.10 m (26 ft 7 in) Maximum Platform Height 6.10 m (20 ft) Platform Capacity 590 kg (1,300 lb) Maximum Occupants 3 persons Gradeability 25% Travel Speed (Stowed) Approx. 2.9 km/h Travel Speed (Raised) Approx. 1.0 km/h Platform Specification Details Platform Length 2.13 m Platform Width 1.07 m Extension Deck Length 1.20 m Total Extended Platform Length Approx. 3.33 m Dimensions Specification Details Overall Length 2.31 m Overall Width 1.17 m Overall Height (Rails Up) 2.07 m Wheelbase Approx. 1.75 m Ground Clearance Approx. 0.10 m Weight Specification Details Machine Weight 1,860 kg Maximum Platform Load 590 kg Tires and Drive Specification Details Tire Type Solid Non-Marking Tires Tire Size 16 x 5 x 12 Drive Configuration 2-Wheel Drive Inside Turning Radius Approx. 0.71 m Outside Turning Radius Approx. 2.64 m Safety Features * Proportional controls * Emergency lowering system * Tilt alarm with drive cut-out * Pothole protection system * Automatic braking system * Overload protection * Dual holding valves on lift cylinders * Emergency stop controls at both platform and ground stations Electrical System Specification Details Power Supply 24V DC Battery Pack 4 × 6V Deep-Cycle Batteries (configuration may vary) Charger On-board Automatic Battery Charger Transport Information Gsdpfx Afez I Agwsuokc Specification Details Transport Length 2.31 m Transport Width 1.17 m Transport Height 2.07 m Transport Weight 1,860 kg = More information = Please contact Bas Sindorf , ) for more information

Condition: good (used), Year of construction: 1992, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform -Load capacity: 500 kg -Platform: 2200 x 1000 mm -Dimension when retracted: 450 mm Gjdpfx Aob A R I Dsfuokc -Extended dimension: 600 mm -Attention: Stroke only: max. 150 mm -without control -Number: 7x lifting tables available -Price: per piece -Empty weight: 700 kg/piece

Year of construction: 1993, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1993 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) Gedon Sm A Sjpfx Afuskc incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Condition: excellent (used), Year of construction: 2018, VPS 100/2500 cardboard cutting machine – fully functional Fully automatic production of outer packaging from continuous cardboard Gkjdpfozmbi Dox Afusc Application: Packaging of high-quality aluminum rims with precisely fitting packaging to prevent slipping Working width: up to 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.5–7 mm Tool width: approx. 45 mm Operating hours: 13,072 in a single-shift operation Accuracy: Longitudinal cuts: ±0.2 mm Length tolerance: ±1.5 mm/m Packaging size: 600 × 600 × 300 mm Output: approx. 55 s per packaging unit Bottom/lid construction Production of individual packaging for exclusive forged wheels. Bottom with corner locks to hold the rim upright Lid according to FEFCO 0331 If required, development of tightly fitting packaging concepts in consultation with the customer Packaging design Integrated software for creating your own packaging designs Database with approx. 250 packaging designs The machine processes continuous cardboard fully automatically. The patented multi-tool performs creasing, scoring, perforating, and cutting using the single-point principle. The material-friendly creasing technology prevents the cardboard from splitting. Perforations are performed using an oscillating knife with a freely adjustable perforation level. Cuts are made with a toothed knife on a rubberized roller, creating clean, fiber-free cut edges. All tools are adjustable by servomotor. Machine construction Welded construction 6 multi-function tools for longitudinal processing (optional up to 12) 1 transverse processing tool 2 rubberized rollers Segment-controlled overpressure Control: Industrial PC Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) Windows 10 IoT Enterprise Beckhoff TwinCAT 3 21" multi-touch panel Control cabinet integrated Software functions: Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Monitoring of residual lengths Production data acquisition (CSV) Plain text error messages Automatic cardboard changer Automatic selection of the optimal cardboard web width. Standard with two positions, expandable to six or, with side-by-side function, to up to twelve web widths. Additional cardboard magazines expand the system with additional web widths and have their own sensors and residual length management. Box designer Programming software for customer-side workstations for the free creation and programming of individual cardboard designs. General condition The system is in good overall optical and technical condition. The machine cladding, safety devices and conveyor components are complete and intact. No visible damage, corrosion or significant signs of wear can be detected. Maintenance performed internally by the company via SAP-PM Every 6 months electrically Every 3 months mechanically

Condition: new, Year of construction: 2024, Under-table cross-cut saw UTK-600 also with a pneumatic vertical front protective shield Execution according to the new current PLC safety control ltd. Of the new machinery directive Technical specifications: - Motor power 7.5 kW S1 - Max. Saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Speed ​​on the saw shaft: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Necessary air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Saw blade feed pneumatic drive - * NEW two-hand safety PLC control - Automatic engine brake - Set of operating keys - Emergency stop button - Speed ​​regulator for saw blade feed - Fixed vertical protection Gkodpfxof Sqy Do Afuec - Upper safety pressure device (pneumatic protective hood) - suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Godjzil R Repfx Afuekc Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: new, Year of construction: 2026, Stock items available for immediate delivery consisting of: Gkjdefnp Swjpfx Afujc ᐳ Stop rail, 3 m long ᐳ 2 complete stop units ᐳ 1 measuring scale, right to left ᐳ 1 measuring scale, left to right ᐳ Fastening screws - The wooden base strip, 50 x 45 mm, onto which the stop rail is screwed, is not included in the scope of delivery.

Condition: good (used), Year of construction: 2014, operating hours: 672 h, fuel type: electric, Genie GS - 2632 Scissor Lift / Work Platform / Scissor Lift 10m working height, Electric, 2014 A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Godpfxsz Rvgqo Afuskc Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, No. 3245 Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 9 units available For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Gkjdpfexpilxjx Afujc Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 37300454, overall weight: 3,525 kg, fuel type: hybrid, Equipment: all wheel drive, - Skyjack - SJ 6832 RTE - Year of manufacture: 2017 - Recorded operating hours - Scissor lift - Hybrid - 12-meter working height - 10-meter platform height - Electric scissor lift with a HATZ diesel engine for charging the batteries - The engine starts and charges the batteries - 4x4 four-wheel drive - Folded height with guardrails up: 250 cm, down: 161 cm - Total transport length: 330 cm, width: 180 cm - Platform dimensions (extended): 396x142 cm - Load capacity: 454 kg - Unladen weight: 3845 kg - Hatz diesel engine - Integrated battery charger Gkodpfx Afsz N Eyqeuoc - Ready for immediate use

Condition: used, Year of construction: 2004, Four-station filling system for large cans and bottles. Additional title: Siphon filler Capacity: 200 Fl/h Filling places: 4 pieces Power: 100 W Voltage: 230 V Frequency: 50 Hz Length: approx. 1,3 m Width: approx. 0,75 m Height: approx. 2 m Formats: 5 l Party cans; 2 l siphon bottle Gkodpfx Aoztzcqjfuec Features: The containers are pressurized before filling, CIP pipes

Condition: used, Year of construction: 2009, operating hours: 2,140 h, 2009 | Haulotte H12SX | Used Scissor Lift | 2140 hours 📍Location: Luxembourg 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 37 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Operating scissorlift, play on right steering linkage , hearable drive motors. Maximum working height is 12m. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40929 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Gksdpfx Afez Rmfdsuoc 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2025, condition: new, Length-cutting unit Gkedpfx Afjzxzdfouec The machine has a 15 kW electrical connection and can saw logs with diameters up to 85 cm. The saw motor has an 11 kW motor. Dimensions: Overall length: 6.5 m Width: 2 m Height: 3.4 m

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 175 mm, cutting width (max.): 820 mm, saw blade diameter: 550 mm, height adjustment type: pneumatic, saw blade bore: 80 mm, actuation type: electric, total length: 8,000 mm, total width: 1,510 mm, total height: 1,850 mm, overall weight: 2,600 kg, table height: 900 mm, Equipment: CE marking, rotational speed infinitely variable, saw blade guard, Longitudinal circular saws made in Germany! Cutting lengths: 2,200 - 11,200 mm Cutting widths: 420 - 3,000 mm Saw motor: 11 kW, optional 15 kW Max. cutting height: 175 mm Saw blade diameter: 450 - 550 mm Saw feed: Infinitely variable, from 0 - 80 m/min. Gksdjz A Tgdopfx Afusc Compressed air connection: 1/2", 6 bar Required air volume: approx. 3500 m³/h

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, lifting height: 10,000 mm, battery voltage: 48 V, empty load weight: 9,000 kg, General information: The HUBTEX 2125-PU/SO with model MQ 40 is an electric multidirectional sideloader with a load capacity of 4 tons and a cross-seat cabin. This forklift is suitable for warehouse areas where maximum flexibility and maneuverability in narrow aisles are required to handle loads of up to 4000 kg. M = Multidirectional steering Q = Cross-seat cabin 40 = 4,000kg 2125 = Series Gedpfx Asx Aqaqsfuokc PU = Vulkollan tires SO = fork tilting and lowering, extendable forks to 1500mm, hydraulic fork width adjustment Additional equipment/modifications: - Camera system on the right and left of the forks, with monitor in the cabin - Positioning lasers on the right and left of the forks - Soft-stop feature when lowering the forks and when crossing the telescopic fork extension steps

Condition: used, Year of construction: 2006, operating hours: 390 h, load capacity: 230 kg, fuel type: electric, Empty weight: 1.565 kg GVW: 1.795 kg Dimensions (LxBxH): 19 x 8 x 20 cm Gsdjz N Hh Nspfx Afuekc Working height: 800 cm Availability: in stock

Year of construction: 1990, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1990 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric Gedpfjn Sm Ayex Afuskc distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Condition: excellent (used), Year of construction: 2016, Used lifting table – 25,000 kg – manufactured in 2016 For sale: a used industrial lifting table from 2016 with a maximum capacity of 25,000 kg. This lifting table has always been used as a welding table and was therefore specifically designed for heavy metalworking operations. A Siegmund welding table, measuring 4,000 × 2,000 mm, has always been mounted on the lifting table. This Siegmund welding table is also available and can be supplied together with the lifting table, if desired. Specifications: Gjdpfoz Ibwusx Afuskc Year of manufacture: 2016 Capacity: 25,000 kg Type: industrial lifting table Use: as a heavy-duty welding table Siegmund welding table: 4,000 × 2,000 mm, available as an option Suitable for heavy metalworking and welding operations The lifting table is in used condition and is suitable for professional industrial use. Price and further information available upon request. For more information or to arrange a viewing, please contact M2Trade.

Condition: used, Year of construction: 2016, operating hours: 219 h, load capacity: 454 kg, empty load weight: 2,132 kg, fuel type: electric, Skyjack SJIII-4626 – electric scissor lift Gkjdpfxjz H At Ij Afusc Year of manufacture 2016, 219 operating hours. Working height 9.75 m, load capacity 454 kg, weight 2132 kg. Dimensions L x W x H: 2.31 x 1.17 x 2.15 m. Electric drive with 24 V battery, hydraulic rear-wheel drive (2WD). Batteries, service, and SUVA inspection valid until September 2026, as stated in the offer. Please confirm the inspection date, scope of inspection, and agreed services for the specific machine. Purchase price EUR 9200 net, plus applicable VAT. Transport costs are quoted separately. Availability and condition will be confirmed personally. Inspection and collection in Ringgenberg by appointment.

Condition: refurbished (used), Year of construction: 2010, XXL-Center RAS 75.06 - General technical data in mm: Bending length: 6400 mm Gedpex Hf Tvjfx Afuekc Max. sheet thickness (400N/mm2): 1.5 mm Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Gripper claws travel range: 10 – 750 mm Clearance in front of the jaws up to: 300 ° Extendable loading tables: yes Gripper claws: yes Programming: automatic via Bendex Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons - Machine-specific data: Motor-driven; 400V, 50/60 Hz, 3-phase Year of manufacture: 2010 Condition: Will be completely overhauled - Images are examples -

Condition: used, Year of construction: 2006, operating hours: 100 h, functionality: fully functional, Profi Industrial Cutting System (Longitudinal/Cross) – Grossmann – ONLY 100 operating hours! Description: For sale is a high-precision, automated longitudinal and cross-cutting machine from quality manufacturer Grossmann Maschinenbau. The system has a total runtime of no more than 100 operating hours. It is therefore in an almost mint technical condition and shows hardly any signs of wear on the mechanical components. Originally designed for cutting chip mats, this machine’s robust construction and versatile PLC control make it suitable for a wide range of materials (e.g. rubber, cork, fleece, composites, films, textiles, etc.). Technical highlights & features: Gedoylxmfopfx Afuskc Condition: Nearly new (max. 100 operating hours). Format: Maximum cut length 2,500 mm x maximum working width 1,200 mm. Complete line: Includes professional unwinder and winder for fully automatic material flow from roll to roll or roll to format. PLC control: Professionally programmed, with a choice between manual and automatic operation. Material handling: Automatic gripper feed positions material precisely in the end position, with integrated edge removal system for perfectly clean edges. Operation: Intuitive control via display, foot switch, and optical/acoustic production completion indicators (traffic light/horn). Precision: Integrated laser for exact material alignment. Safety: Fully enclosed design and modern safety monitoring. Versatility: This machine is a true all-rounder for any rolled material that needs to be cut to precise sheet sizes or strips. Its stable construction with a high-quality aluminum profile system ensures maximum rigidity. Complete documentation available, including process protocol, wiring diagrams, and technical drawings. The machine can be inspected and tested under power by appointment. For exact technical details and questions about fields of application, please feel free to contact me personally. Contact: Phone: 05427 9423 20

Condition: new, Year of construction: 2024, manual hydraulic frame and edge press 1-sided, stationary > strong welded steel frame > frame pressing system with continuous counter pressure beam on the left side > 1 movable slide (machined surface) for horizontal calibration of width, adjustable in 50 mm increments; with bolt for central locking > 2 manual hydraulic cylinders, horizontal adjustable, pressing strength of 20.000 N each and stroke of 60 mm > 5 vertical pressing units on ball bearings in galvanized structural steel with manual hydraulic cylinders, pressing strength of 20.000 N and stroke of 60 mm pressing units adjustable in 50 mm increments; bearings adjustable six fold and with drop out safety lock; bearing and pressure plate: 40 mm long and 80 mm deep > 1 zinc-plated adjustable hold-down bar with screw clamp, manual to be unhinged > painting: grey-white RAL 9002, abutment and pressing plate blue RAL 5010. > also available with more or less vertical pressing units art.no. Q 007 Gkodpsyuxkofx Afusc (as listed in accessories and options) working space as frame press (w / h in mm): 2700 x 1800 working space as edge press (w / h in mm): 3000 x 1800 overall dimensions (w / h / d in mm): 3340 x 2350 x 730 Price additional packaging costs 92,- netto

Condition: used, Year of construction: 2015, operating hours: 144 h, machine/vehicle number: 11700054, load capacity: 680 kg, lifting height: 9,000 mm, construction height: 2,670 mm, fuel type: electric, Equipment: all wheel drive, MEC 3084ES – electric scissor lift with 4x4 all-wheel drive Year of manufacture 2015, 144 operating hours, serial number 11700054. Working height 11 m, platform height 9 m, lifting capacity 680 kg. Weight according to machine specifications 3975 kg, depending on the equipment. Dimensions L x W x H: 4.40 x 2.13 x 2.67 m with guardrails extended. Please confirm the inspection date, scope of inspection, and agreed services for the specific machine. Gjdez H Avcspfx Afuekc Purchase price EUR 20,450 net, plus applicable VAT. Transport costs are separate and subject to quotation. Availability and condition will be confirmed personally. Inspection and collection in Ringgenberg by appointment.

Condition: good (used), Year of construction: 2017, operating hours: 877 h, empty load weight: 7,300 kg, fuel type: diesel, ATN CX 15 Scissor Lift / Work Platform / Scissor Lift 15m working height, Kubota Diesel, 2017 A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any warranties (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Gkedpfx Afez H Ubdsuoc Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: not inspected (used), Year of construction: 1995, gabletop filling machine for milk Gkedpfehx D E Djx Afuoc 1000 packs/h 0,25 L / 0,5 L / 1,0 L for cartons without screwcap