Used Berg & Schmidt Bs 280 Plus for sale (10,190)

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I Gujdpfx Asfgyicelxeb · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm Gujdpjfu Nbbefx Alxob 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW Gjdpfx Aefg E Hlelxoub weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Gusdpfx Alefgyifsxjb Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed Godpsfgyigsfx Alxoub vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Godofg E Hmspfx Alxsub Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° Guedpsfg E Hnefx Alxob High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with Gusdefg E Hpepfx Alxob lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, maximum load weight: 33,525 kg, overall weight: 46,000 kg, axle configuration: > 3 axles, first registration: 04/2008, Year of construction: 2008, Equipment: ABS, Manufacturer Kel-Berg / Faymonville Model 4 akslet 3 m Udtræks Maskintrailer Gusdpjxa Tdmofx Alxob Year 2008 Condition Good Serial Number SKBE58S407KE12547 Ref. nr. 7972 Reg. date: 30-04-2008 Drum brake: ? ABS: ? Rear axles: SO F Suspension: Air Tire Size: 235/75R17,5 Cover% left 30-50% Toolbox: ? Total weight: 46000 Kg Net weight: 12575 Kg Load capacity 33425 Kg Inside length: 8.75m / 12.10m Extraction: 3 m Forced steering axles: 3+4 Hydraulic ramps: ? Hydraulic rear support leg: ?

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Type: FXP57S WF Constr. year: 2016 diameter range: 14-22 mm number of dies: 7 Guedpewi Sulsfx Alxjb number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Condition: used, functionality: fully functional, saw blade diameter: 400 mm, SCHMIDT sharpening machine for HSS saw blades Guedpfx Aloyxhmcjxob

Condition: used, mileage: 24,440 km, power: 80 kW (108.77 HP), first registration: 09/2018, fuel type: diesel, empty load weight: 3,800 kg, maximum load weight: 2,700 kg, overall weight: 6,500 kg, tire size: 245/70 R 17,5, wheelbase: 3,100 mm, color: orange, driver cabin: other, gearing type: mechanical, operating hours: 1,815 h, Equipment: air conditioning, * 4x4 drive selectable * Differential lock rear axle * Differential lock front axle * Comfort seat with pneumatic self-adjustment for driver * Passenger single seat with suspension * Rear seat bench for 3 persons * Municipal hydraulics 2-circuit with movement and power hydraulics: * 1st circuit: 2x double-acting movement hydraulics with float position, 1 x single-acting for tipper, 1 x additional double-acting valve, Gjdpfeylaphex Alxoub * 2nd circuit: 1x power hydraulics, proportionally adjustable, max. 50 l/min, 180 bar * Air conditioning * Heated exterior mirrors * Winter service lighting bar with 4 headlights and rotating beacon * Battery main switch * SWS front implement plate, Multicar type * Trailer coupling ball head 3.5 * Trailer socket 12V, 13-pin * Flatbed fixed body, 2320 x 1638 x 500 mm (front 700 mm) ? Full aluminum version Direct contact/ used vehicles and equipment: Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. - .

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, total height: 2,050 mm, total width: 1,930 mm, total length: 2,600 mm, type of input current: DC, overall weight: 1,050 kg, power of the servo motor: 3,500 W, film width: 500 mm, input voltage: 230 V, product height (min.): 10 mm, product height (max.): 250 mm, product width (max.): 450 mm, product length (min.): 100 mm, product width (min.): 10 mm, product length (max.): 650 mm, air demand: 0.5 m³/h, Equipment: compressor, Packer Plus P400 Parcel Packing Machine, manufactured in 2025, is designed for automatic packing of parcels into plastic mailers, simultaneous sealing, and application of address labels. The machine is ideally suited for logistics centers, online stores, and dispatch warehouses. Godpfx Ajyx Ebqslxoub Model: Packer Plus P400 Year of manufacture: 2025 Throughput: approx. 600 parcels/hour Packing method: plastic film + heat sealing Automatic address label application Condition: Very good / like new Included in the scope of delivery: - Computer with monitor - Compressor required for machine operation The machine is ready for immediate use, significantly speeds up the packing process, and reduces manual handling costs. Integrated functions performed by the machine: - Scanning - Packing - Label printing - Label application Supported product dimensions: Length: 100–650 mm Width: 10–450 mm Height: 10–250 mm Maximum speed: up to 1,200 parcels per hour Typical working speed: 700–850 parcels per hour Label dimensions: Length: 60–180 mm Width: 70–100 mm Printer: Zebra ZE500 industrial printer, supporting both direct thermal and thermal transfer printing. Components: PLC controller: Siemens Sensors: Omron Safety components: Schneider, Sick, Eaton Integrated computer system for machine operation Communication interfaces: Ethernet, USB, RS232 Power supply: 230 V Power consumption: 3,500 W Working pressure: 0.8–1.0 MPa Air consumption: 0.5 m³/min Overall dimensions: 2,600 × 1,930 × 2,050 mm Weight: 1,050 kg

Condition: new, pressing force: 3 t, Force 32 kN, stroke 100 mm Gujdpfjyxmppex Alxob

Condition: used, Year of construction: 2022, operating hours: 2,600 h, Equipment: all wheel drive, Caterpillar M318 Gsdpfjyv Uh Ujx Alxjub Engine: Cat C4.4 – Power (ISO 14396): 129 kW / approx. 176 HP – Displacement: 4.4 l – Cylinders: 4 – Emissions: EU Stage V Travel performance Max. speed: up to approx. 35 km/h * Drive: hydrostatic travel drive * Steering: all-wheel steering with oscillating axle Tank & Hydraulics Diesel tank: approx. 350 liters * Hydraulic system: load-sensing hydraulics with multiple auxiliary circuits for attachments Air conditioning Only 2,600 operating hours and in very good condition

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity at 90° round: 120 mm square: 100 mm rectangular: 180 x 100 mm Gusdpfx Aox Ek A Tslxeb at 45° round: 120 mm square: 100 mm at 60° round: 110 mm square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Weight: 390 kg

Condition: excellent (used), functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Vesant 280’ colour production system. Item for sale: 1 x Xerox Versant 280 with the following equipment: Includes Fiery Server EX180 Includes Paper Deck A-CF03 Includes Booklet Finisher A-FN13 Guodpfx Aoxx Ifcelxsb Includes 2-side trimming Includes square fold and front trimming Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 518,174 pages Colour: Approx. 289,321 pages Black: Approx. 228,853 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, mileage: 1,600 km, power: 387 kW (526.17 HP), first registration: 05/2025, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, Body * Body Manufacturer: Hiab Transmission * Automatic transmission Exterior * Power take-off (PTO) * Axle load indicator Safety * Intarder Interior * Fabric seats * Interior color: anthracite * Sun visor Comfort * Automatic climate control Guedpfx Alsyw Dmcoxjb * Comfort seat (driver/passenger) * Air-suspended driver/passenger seat * Height-adjustable driver's seat * Driver's armrest * Heated driver's seat * Driver's lumbar support * Driver's seat ventilation ---- Subject to errors and changes

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, throat depth: 430 mm, nominal power at 50% duty cycle: 88 kVA, type of cooling: water, overall weight: 279 kg, Electrode holder, electrode arms, transformer and water-cooled electrodes Welding controller with graphic display Guodpfx Aeyvx Hzolxjb Medium-frequency technology / inverter Welding controller PY800 Electrode stroke 60 mm Water requirement 9 L/min

Condition: like new (used), Year of construction: 2025, Dear Sir or Madam, We are pleased to offer you a Schmidt CP3 demonstration unit. Equipment: - CP3 combination scraper blade set 36 - Lifting mechanism - Suitable for mounting plate size 3 - Hydraulic adjustment group (lifting/lowering/shifting) - Coupling for vehicle hydraulics (ISO 16028, size 12 / BG3) - double line - Parking stand - Side deflectors left and right - Snow dust protection - Warning markings - Plow lighting in LED Sale in existing condition and only to other businesses!!! Our business hours: Mon-Thu: 07:00 am - 03:30 pm Fri: 07:00 am - 03:00 pm Offer based on our general terms and conditions!!! Sale only to commercial enterprises!!! Used vehicles / used equipment are sold without liability for material defects as per our terms and conditions!!! If you have any further questions, I am at your disposal. For inspections and/or test drives, please arrange an appointment in advance!!! Vehicles/equipment are not always at the listed location. Gujdpfexfabpex Alxsb

Condition: used, Year of construction: 2011, gearing type: other, first registration: 01/2011, color: orange, mileage: 1,001 km, empty load weight: 616 kg, driver cabin: other, Vehicle location: Bovenden, Gujdpsyuw Rbefx Alxeb Body: Salt spreader approximately 2 m³. The salt spreader was mounted on a Unimog U300! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; changes, prior sale, and errors reserved!

Condition: excellent (used), Year of construction: 2025, operating hours: 2 h, lifting height: 3,000 mm, fuel type: diesel, power: 39 kW (53.03 HP), Empty weight: 3.680 kg Lifting capacity: 2.500 kg Godpfx Ajxkrv Ajlxsub Maximum passing height: 207 cm CE mark: yes Technical condition: very good Visual appearance: very good Please contact Tobias Mayr for more information

Condition: used, diameter / mm hollow / mm chuck width / mm weight / kg Gedpfx Alsytycqoxjub HES 400/115 power chuck from BERG with jaws Type: HES 400/115

Condition: good (used), Year of construction: 2021, Mitre cuts up to 60° left and 45° right Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Infinitely variable band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 420 kg Ball-bearing rotary table Quick-release vice Godpfx Asyuyb Nslxjub Large material support Coolant system Including: Infeed roller conveyor 2x2000 mm Measuring unit 4000 mm on the discharge side with digital display

Condition: used, first registration: 02/2008, Year of construction: 2008, Schmidt Hagen SP/42/E/13.5-21.5 *3-axle flatbed semi-trailer*steering axles*ALCOA* !!! Very good condition !!! ● ABS ● Air suspension ● Lift/lowering system ● Floor height: 1,420 mm ● Alcoa Dura-Bright rims ● 3 x Mercedes axles with disc brakes ● All 3 axles are steerable! ● Tyres: 385/55 R 22.5 ● Tread depth: 3/2 / 5/4 / 5/6 mm ● Gross weight: 42,000 kg Guedpfx Aljyutxzjxsb ● Unladen weight: 10,200 kg ● Payload: 31,800 kg - German trailer - TÜV / inspection: available new upon request and for an additional charge! Errors and prior sale excepted! = More information = Please contact Joannis Arpantzanis or Kai Bühler for further information.