Used Bernardo Ms 150 X 2000 Dc-2 / 400 V for sale (117,971)

Condition: good (used), axle configuration: 3 axles, first registration: 12/2002, suspension: air, Year of construction: 2002, Equipment: ABS, = Additional Options and Accessories = - EBS - Lift axle - Air suspension = Further Information = Suspension: Air suspension Rear axle 1: Steerable Rear axle 2: Steerable Rear axle 3: Steerable Unladen weight: 12,940 kg Payload: 21,060 kg GVW: 34,000 kg Technical condition: good Optical condition: good Vehicle number: Low-bed trailer: 15 Faymonville / 3 axles, steerable, with remote control SAF / Extendable .: YA9TL35F02113453 SAF 3 x Steerable axles with remote control Unladen weight: 12,490 kg Total weight: 34,000 kg Iisdpfxszvzt Is Aphjh Length: 9.20 m, with extension 15.10 m + extension 20.40 m, total length 24.40 m Width: m = Company Information = No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, functionality: unexamined, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights Ijdpez S Nbwsfx Apheih CEE power plug

Condition: new, 6,5 mm ST 40 3,5 mm VA 90° Grad blade length 250 x 250 mm table: 810 x 750 mm work height max. 950 mm engine output 4,0 weight 630 kg range L-W-H 810 x 750 x 1150 mm Characteristics : Iiodpfxexcux De Aphoh - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Ijdpfsdcmdlex Aphoih Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture: 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal performance modulation — Technical Data: • Year: 2012 • Output: 102–109 kW • Combustion output: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water volume: 190 liters • Weight: approx. 1010 kg — Key Features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-based adjustment) • Automatic cleaning and de-ashing • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic grate (self-cleaning) • Very low power consumption (~0.18 kW) • Modern, energy-efficient system — Feeding Technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with an automatic pellet suction system (vacuum system/suction feed) ➡️ Very simple pellet operation: • Connection to pellet storage via flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual feeding ➡️ Optional: Can also be used for wood chip operation (by connecting to a discharge system) — Iisdsy A Ei Nopfx Aphjh Condition: • Recently dismantled • Was fully operational until dismantling — Inspection: Viewings are possible by appointment at our 1,500 m² warehouse in Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used Heating Systems, Boilers, Heat Pumps & Accessories Direct from Stock We are a family business with around 20 years of experience in heating technology, boasting a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our inventory includes: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and Components: Additionally, we have a wide range of accessories, including circulation pumps, plate heat exchangers and many other components – from small-scale applications to industrial-scale solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units that are not yet listed. 📅 Inspection: A viewing at our warehouse is possible by prior appointment. If you are interested, please contact us – we will help you find the right solution.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1986, total height: 320 mm, total length: 8,775 mm, total width: 2,100 mm, load capacity: 2,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder – Capacity: 2,000 kg – Lifting height: 6 m – Year of manufacture: 1986 – Hoist type: wire rope hoist – FEM/ISO hoist: 3m Dimensions – Span: 8,775 mm centre-to-centre – Installation height: 320 mm – Width of wheel set excluding bumpers: 2,100 mm Iiedez N T Naspfx Apheh – Wheelbase: 1,900 mm – Suitable for crane rail: 50×30 mm Speeds – Hoisting: 5/0.8 m/min (2 speeds) Features – Control: wired push-button control box – Crane manual available: yes, newly prepared – Electrical diagram available: yes – Condition: in good condition, dismantled but operational – Dismantled: yes, available immediately

Condition: used, Year of manufacture: 1986 Colour: Green Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Year: 1986 - Serial number: 13350686 - Main motor power [kW]: 7.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Max. workpiece height [mm]: 120 - Total stroke [mm]: 150 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 10 Iiedjwng S Aspfx Apheh - Cylinder diameter [mm]: 130 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, table length 2000 mm table width 1000 mm Iedpfx Apovn Uycehoih table height 920 - 1000 mm weight of the machine ca. 0,45 t Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Height adjustable from approx. 920 - 1000mm Ribbed bottom for reinforcement. including floor storage Accessories optional!! Accessories shown are optional!!

Year of construction: 1999, condition: ready for operation (used), travel distance X-axis: 600 mm, travel distance Z-axis: 2,290 mm, number of axes: 2, Cylindrical grinding machine manufactured in 1999. This Cetos BHU 50 A x 2000 features a swing diameter of 500 mm and a center distance of 2000 mm. It has a maximum grinding wheel width of 200 mm and can accommodate workpieces weighing up to 300 kg. If you are looking to get high-quality grinding capabilities, consider the Cetos BHU 50 A x 2000 machine we have for sale. Contact us for further details. - Z-Axis Travel (Longitudinal Travel): 2290 mm- X-Axis Travel (Cross Movement): > 600 mm (tested, capable of more)- Hydraulic Rapid Stroke (X-Axis): 120 mm- Max. Grinding Diameter: Minimum 500 mm- Grinding Wheel Diameter (New): 500 mm- Swing Diameter: 500 mm- Center Distance: 2000 mm- Grinding Wheel Dimensions (Diameter x Width x Bore): 500 x 80 x 203 mm- Grinding Wheel Diameter After Partial Wear: 380 mm- Minimum Ground Swing Diameter with Worn Wheel (380 mm): 70 mm- Maximum Grinding Wheel Width: 200 mm- Maximum Width of Multi-Piece Wheel Set: 200 mm- Maximum Sum of Individual Wheel Widths in Multi-Piece Set: 200 mm- Swing Diameter in Open Steady Rest: 110 mm- Swing Diameter in Closed Steady Rest: 110 mm- Taper in Workhead Spindle: MORSE 5- Taper in Tailstock Sleeve: MORSE 5- Clamping Chuck Diameter: 200 mm- Bore in Sleeve for Internal Grinding Spindle: 100 mm- Workhead Swivel Angle: +95° / -5°- Wheelhead Swivel Angle: ±45°- Upper Table Swivel Angle at 2000 mm Center Distance: +5° / -3°- Machine Weight with Standard Accessories (at 2000 mm Center Distance): 6700 kg- Workhead Spindle Speeds (Infinitely Variable): 18–112 min⁻¹ / 90–560 min⁻¹ (1st Row / 2nd Row)- Smallest Table Longitudinal Travel: 1 mm- Largest Table Longitudinal Travel (at 2000 mm Center Distance): 2290 mm- Cross Movement of Wheelhead: 415 mm- Hydraulic Rapid Traverse of Wheelhead: 60 mm- Table Speed (Infinitely Variable): 0.05–4 m/min- Cross Movement of Wheelhead per Automatic Infeed: 0.2 mm/ø- Cross Movement of Wheelhead per Automatic Infeed for Fine Grinding: 0.15 mm/ø- Automatic Infeed of Wheelhead at Table Reversals for Plunge Grinding: 0.0005–0.01 mm/ø- Automatic Infeed of Wheelhead at Table Reversals for Traverse Grinding: 0.005–0.05 mm/ø- Speed of Automatic Wheelhead Infeed During Plunge Grinding: 1 ⁻¹- Infeed Speed for Spark-Out Infeed: 0.015 ⁻¹- Total Power Requirement of Electric Motors: 16 kVA- Wheelhead Motor Power: 9.5 kW- Maximum Workpiece Weight Admitted Between Centers: 300 kg- Maximum Overhanging Workpiece Weight (Including Clamping Device): 60 kg- Table Infeed Advance: 6 m.min⁻¹ Isdpfoz E Nfhex Apheih

Condition: good (used), Year of construction: 2007, tank capacity: 31,000 l, total length: 7,820 mm, total width: 2,550 mm, total height: 2,670 mm, overall weight: 36,000 kg, wall material: stainless steel, manhole diameter: 50 mm, operating pressure: 4 bar, Stainless steel V4A tank container with two dome-shaped covers, each with a diameter of 50 cm. Bottom outlet, three inches BSP, which corresponds to 7.5 cm. Walkways on top with folding railings. Large ADR test certificate (WHP-5), new. Located in Mannheim. All information is provided without guarantee, subject to errors and prior sale. Iijdpez Szfnofx Apheh

Condition: new, plate depth 2000 mm plate width 1500 mm plate height 300 mm weight 2385 kg dimensions of the machine ca. 2000 x 1500 x 300 mm GERD WOLFF clamping plate 2000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way we can manufacture a clamping plate for you according to your requirements. T-slot size: 48 x 28 Iodpoyk Ih Nofx Aphsih T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 2385 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/T DR63M6/BR/TH geared motor with a three-phase motor and a 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of use and minor scratches on the housing. Technical specifications: Manufacturer: SEW-EURODRIVE Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply voltage: 3×230/400 V Δ/Y Frequency: 50 Hz Current: 1.00 / 0.57 A Motor speed: 900 rpm Output speed: 15 rpm Torque: 32 Nm Gear ratio: i = 60.00 Ingress protection: IP54 Iedpfxoz Snpls Aphjih Insulation class: F Brake: 24 V DC Weight: 9.46 kg

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/T DT71D6/BMG/TH geared motor with a built-in 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for use. The technical condition is very good. The housing has normal signs of use in the form of minor scratches and abrasions, which do not affect the operation of the device. Iodpfx Apoz Snpqohoih Technical data: Manufacturer: SEW-EURODRIVE Gearbox model: WA20/T Motor type: DT71D6/BMG/TH Power: 0.25 kW Supply: 3×230/400 V Δ/Y Frequency: 50 Hz Rated current: 1.48 / 0.85 A Motor speed: 880 rpm Output speed: 45 rpm Torque: 37 Nm Gear ratio: i = 19.50 Protection class: IP54 Insulation class: F Brake: 24 V DC Braking torque: 5 Nm Weight: 11.66 kg

Condition: used, Oscillating shear machine KÖLLSCHEN, type BSK 2000/2 Cutting length: 2000 mm Cutting thickness: 2 mm Stand overhang: 90 mm Working height: 920 mm Power supply: 380 volts, 50 Hz Motor power: 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet metal holder - Manual back gauge, 500 mm - Gauge adjustment via 2 handwheels, at the rear on the back gauge guide with a measuring scale - Front side gauge, left, 720 mm - Electric foot switch Iedjifu Anspfx Aphoih - Manual central lubrication - Control cabinet on the machine - Machine rests on 4 oscillating elements, approximately 100 mm in height Space requirement (L x W x H): 2800 x 1700 x 1450 mm Weight: 2300 kg Good condition

Condition: good (used), Offer 08533 Isdsh Uuavopfx Aphoih Technical specifications: - Length: approx. 2000 mm - Width: approx. 1500 mm - Material thickness of the top plate: approx. 40 mm - Overall height of the ribbed plate: approx. 180 mm - Overall height of the plate with steel substructure: approx. 850 mm - Weight: approx. 1800 kg

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Iodpfxez H I Ane Aphsih Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Mounting plate: with support ribs Iiodpex Sym Usfx Aphjh -Clamping surface: 2000 x 4000 mm -Sheet thickness: 85 mm -Plate: with supporting ribs -Quantity: 1 mounting plate available -Price: per piece -Dimensions: 4000/2000/H405 mm -Weight: 8800 kg

Condition: new, Year of construction: 2026, new cast epoxy resin - distribution 3 phase transformers manufactured by TESAR Italy, 3 pcs 400kVA, 2 pcs 630kVA, 2 pcs 1000kVA, 1 pc 1250kVA, 2 pcs 2000, 1 pc 2500kVA 22000 ( ± 2 x 2,5 %) /400V; Dyn1/5/11 ( adjustable), IP00, losses Ecodesign tier2, project design documentation and rutine protocols, manuals, unpacked, 2 years warranty, available asap from our stock. Iodpfjhybc Nox Aphoih

Condition: new, plate depth 4000 mm plate width 2000 mm plate height 600 mm weight 6700 kg GERD WOLFF clamping cube 4000 x 2000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 52 x 28 T-slot spacing: 500 Number of grooves: 8 x 8 Edge distance: 250 Weight: 6700 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Iedpoymf I Ejfx Apheih Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: used, Technical details: Ijdpozcwr Iefx Aphjih floor-plate length: 4000 mm plate width: 1500 mm plate height: 250 mm weight of the machine ca.: 4,6 t space requirements of the machine approx.: 4,0 x 1,5 x 0,25 m *

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, surface plate, marking plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate -Manufacturer: Planolith, granite measuring plate hard stone measuring plate -Size: 2000 x 1500 mm -Accuracy grade: O (< 0.012 mm) -T-slot: width 14 mm Iisdoub D Rlopfx Aphoh -Dimensions: 2020/1520/H256 mm -Weight: 2360 kg

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 90.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding Ijdpfxoxabp Dj Apheih properties of the sanding belt Scope of delivery : - Sanding belt 150 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Condition: used, all stainless steel nett width 600 mm Iijdpfx Apez Rl Htohoh 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: used, Year of construction: 2023, overall weight: 70 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Iedpfjzkb Dijx Apheih

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Equipment: - 6 lashing points - Welded frame - Multiplex walls Net price: €4,869.75 / Gross price: €5,795.00 Article number: SPL220301518.22 Technical data: • Brand: Hapert Trailers • Model: Sapphire L-2 • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 300 x 150 x 180 cm • External dimensions (L x W x H): 435 x 198 x 238 cm • Loading height of the floor: 52 cm • Permissible total weight: 2,000 kg • Unladen weight: 688 kg • Payload: 1,312 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor and walls made of multiplex • Reinforced, robust, screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Longitudinal beams are continuous • Frame is very torsion-resistant due to its stable construction • 6 lashing eyes recessed inside on the side edge (1000 DaN/kg), TÜV certified! • Battery-powered interior light for free positioning • Tailgate with gas springs and anti-slip surface • Continuous interior height: approx. 178 cm • Continuous interior width: approx. 142 cm • 2 maneuvering handles at the front • Maintenance-free rubber spring axles from KNOTT • Reverse assist • KNOTT inertia coupling and parking brake • Very stable, screwed V-drawbar • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Iijdpfozu N A Ijx Aphsh Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -