Used Biesse Biesse 6-Station Edge Holder for sale (60,301)

Condition: used, Pressure gauge BIESSE 2424A0007. Kedpfxjzrxnnj Ag Asdu

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 77503, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 25 m/min, overall weight: 6,510 kg, controller manufacturer: SINTRA, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Max. feed speed: 25 m/min MACHINE DETAILS Control: Sintra Weight: 6,510 kg EQUIPMENT - Sanding unit - Coil holder magazine with 2 positions and automatic edge change via CNC - Adhesive unit for EVA hot-melt glue with preheating device and glue pot - Preparation for adhesive unit for PUR glue - Pressure group for straight profiles with electronically adjustable pressure rollers via CNC Kdsdjydidrspfx Ag Aju - End trimming unit with 2 motors and automatic tilt adjustment - Filler unit with 2 vertically aligned motors - Edge smoothing unit with 2 swivelling motors - Multifunctional 4-motor corner rounding unit (smoother + corner rounder) with numerical control in automatic adaptation - Anti-stick unit - Adjustable edge scraper unit - Glue-saving unit - Oscillating brush unit - Electronically adjustable working height - Motorized rubber belt with increased pressure - Motorized and electronically adjustable panel guide - Side roller conveyor with idler rollers for panel support

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 36956, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, total length: 9,800 mm, overall weight: 600 kg, plate height: 1,060 mm, TECHNICAL DETAILS Kedpsx A Tzqefx Ag Aedu Workpiece height: 60 mm Edge thickness: up to 3 mm Minimum panel width: 55 mm Minimum panel length: 100 mm Panel height: 1,060 mm Tool interface: ISO 30 MACHINE DETAILS Dimensions & weight Total length: 9,800 mm Weight: 600 kg Input frequency: 50 Hz EQUIPMENT Return system Operates with PUR adhesive Spray system Pre-milling unit RT 20 Gluing unit SP 20 6-position edge magazine End trimming unit IT 90-S Rough milling unit RS 10 Fine trimming unit RF 40 Note: Further information regarding equipment can be found on the attached machine data sheet.

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Kdsdpfou Tg Uqex Ag Asu Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Profile Scraping unit (Multi-profile, by N.C.) RB 30 Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 Ksdpfx Aelwqrteg Aodu The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 1000017221, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, controller model: BSuite3, number of spindles: 17, TECHNICAL DETAILS Working area X-axis: 2,500 mm Kdodpfx Agoyzpcds Asu Working area Y-axis: 900 mm Working area Z-axis: 60 mm Number of axes: 3 Tool: ISO 30 Spindles Total number of spindles: 17 6 vertical in X-axis 5 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis MACHINE DETAILS Numerical control: BSolid Software - BSuite3 EQUIPMENT Automatic unloading device Integrated blade for groove insertion Front protective and safety systems with mats Perimetric protective grids External reference: MME002

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Kedpfx Asidqf Rog Aedu No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. Kdjdpfx Agjg Urn Eo Asu J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. With CNC (software Tooling System + Woodmaster) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts

Condition: like new (used), Year of construction: 2008, I sell the throughfeed nesting CNC working centre Biesse Excel NBC 712 X1-S Year 2008. Very productive and fast. Automatic infeed table. Working area 3730x2200mm Configuration: Milling head HSK63 12kW, 1000-24000 rpm, independend Z-axis liquid cooling with the 8 position HSK63 magazine 16+8+4 Drilling heads 1 Grooving saw D.150mm 2-position X/Y 1 Revolving electrospindle with cutting aggregate liquid cooling Software BiesseWorks Advanced + Biesse Nest. CD included. Pumps 3pcs. BUSCH 3x 300/360 m3/hr. Condition like new ! Fully working. Ksdpefwvppefx Ag Ajdu Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Condition: excellent (used), Electronic programmer RT 483 No. 2 Through- feed motorized conveyoring belts Feeding speed (55 m/min ca.) No. 2 Horizontal units/supports No. 1 Drilling heads for each horizontal unit/support (1 x HP 1,5) Kjdjfz Nanepfx Ag Ajdu No. 20 Spindles for each horizontal drilling head Max. working width (mm) 3200 Min. working width (mm) 220 No. 7 Bottom vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Top vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Vertical top pressure clamps No. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display Total power installed (Kw) 35,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: new, functionality: fully functional, Year of construction: 2024, A crawler mobile stone crusher is a mobile crushing device that has a tracked chassis, which allows it to move around the site and be transported from one location to another. This type of crusher is generally used in areas where there are space restrictions and the stones need to be crushed directly at the site, making it a versatile and flexible option for various applications. Here are some key features and aspects of crawler mobile stone crushers: 1. Mobility: - The primary advantage of a crawler mobile stone crusher is its mobility. The tracked chassis enables it to move easily on different types of terrain, making it suitable for a wide range of applications, including construction sites, quarries, and demolition projects. 2. Crushing Mechanism: - Crawler mobile stone crushers are equipped with a primary crusher to break down the large rocks into smaller pieces. Common types of primary crushers include jaw crushers, impact crushers, or cone crushers. 3. Versatility: - These crushers are versatile and can handle various types of materials, including hard rocks, ores, and recycled concrete. They can be used for primary, secondary, or tertiary crushing depending on the specific requirements of the application. 4. Remote Control Operation: - Many crawler mobile crushers are equipped with remote control systems, allowing operators to control the equipment from a distance. This feature enhances safety and efficiency, especially in challenging or hazardous environments. 5. Compact Design: - Crawler mobile stone crushers typically have a compact design, making them suitable for working in confined spaces or on construction sites with limited available space. 6. Hydraulic System: Ksdpfx Aoq Nxpgeg Ajdu - The crushers are often equipped with a hydraulic system to facilitate quick and easy adjustment of the crusher settings. This includes adjusting the crusher's discharge opening and controlling the feed rate. 7. High Production Capacity: - Despite their compact design, crawler mobile stone crushers can have high production capacities. This is crucial for efficiently processing large volumes of material on construction sites or in mining operations. 8. Screening Unit (Optional): - Some crawler mobile crushers come with an integrated screening unit, allowing the production of multiple particle sizes in a single pass. This can be particularly useful in applications where a specific range of sizes is required. 9. Power Source: - Crawler mobile stone crushers are typically powered by diesel engines, providing the flexibility to operate in remote areas where electrical power may not be readily available. 10. Easy Maintenance: - Many crawler mobile crushers are designed with ease of maintenance in mind, with features such as access panels and service points to simplify routine inspections and repairs. Crawler mobile stone crushers have become popular in the construction and mining industries due to their flexibility, mobility, and ability to crush a variety of materials on-site. They offer a solution for efficient and convenient mobile crushing operations in diverse working environments.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Equipped with B-Solid software. Maximum workable height: 120 mm Maximum workable length with automatic feed: 3200 mm Tool changer with 22 positions Includes a new Quattro drilling unit. Kdsdpfx Aovr D Sijg Aju

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Kdodpfxsvwgizj Ag Asu Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Kdsdpfx Asv Aailog Aeu

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3 Kdsded Rg Dpspfx Ag Aju

Condition: ready for operation (used), Year of construction: 1984, Brand: Biesse Model: Forecon 51 Machine no: 401/83 Year model: 1984 Tech data: 1 horizontal drilling unit with 21 spindles 2 swivel drill units with 15 drill chucks each Center distance between spindles: 32mm Horizontal unit motor: 2Hk 2 vertical motors: 2Hk Spindles: 2800rpm Air pressure: 6-7 atm Air consumption per cycle: 17 l Total engine power: 5.5Kw Comes with fence, see picture. Kederiutkopfx Ag Asdu Machine size: 1500x3140x1500mm Weight: approx. 590 kg Stock no: 2001355

Condition: good (used), Included in delivery are: 28x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. Kedpfopl Tdnsx Ag Asdu small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 1.044x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight / pallet: approx. 95,00 kg Weight / 1,044 pcs.: approx. 380.00 kg Remark: These are used stacking transport boxes. There may be scratches, dirt and color defects. color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. Kjdspl Tf Espfx Ag Aodu small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 261x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes weight | piece: 0,266 kg Weight | pallet: approx. 95,00 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color color defects may be present. Kedjpl Uc Tspfx Ag Aedu Field of application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about shipping the item: - The goods are shipped free of charge throughout Germany - The island transport is excluded - The delivery takes place only to the curb - For unloading, access and departure routes to the unloading point Unloading point for a 40to Sattelzug voraussgesetzt - The unloading takes place from the buyer by forklift truck

Condition: new, Year of construction: 2024, HD-F Fiber Laser Cutting Systems Durma fiber laser cutting machines are characterized by faster cutting speeds and energy efficiency, especially compared to CO2 lasers. Thanks to the high-tech fiber laser cutting technology, the laser machines are easy to operate and maintain. With the highly efficient components used in Durma fiber laser cutting systems, you receive quality, performance, and efficiency simultaneously, which increases the value of your company. Thanks to highly precise Helis gears, very high acceleration values (28 m/s2), a high travel speed (170 m/min), and positioning tolerance values (0.05 mm) can be achieved. Durma fiber laser cutting systems are unique with their stable and modular machine body, excellent filter system, compact design, and efficient and user-friendly structure. X-axis: 6000 mm Y-axis: 3000 mm Z-axis: 125 mm Max. sheet size: 6048x2024 mm Max. sheet weight: 200 kg/m2 X-axis: 100 m/min. Y-axis: 120 m/min. Synchronization: 156 m/min. Acceleration: 16 m/s2 Positioning accuracy: + 0.05 mm Kdodpog Adu Hjfx Ag Aou Reproducibility: +0.05 mm Cutting thickness Mild steel: 25 mm Stainless steel: 15 mm Aluminum: 20 mm Standard equipment Automatic pallet changer Sinumerik 840D control Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measurement system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust extraction Vanterm Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet layer detection, measurement The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Kdodpsv R Nk Uofx Ag Aou Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Kdodpfoukhd Asx Ag Aeu No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” Kedpfecr U Ursx Ag Asdu SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment SIZING PART (for each side): No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5.8 x 2) Free space for Milling unit FS Milling unit (vertical join trimming) ES30 + ER30 (Kw 5 x 2) 0° - 90° Softforming Milling unit SF 10 (2 x Kw 2,4) 0° - 45° Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Lamps to heat the workpieces side (infrared heater) RP 10 Band Pressure zone (N.C. adjustment) Pressing rollers (revolver) both for straight and shaped edges (softforming) Soft PF40 (4 positions) mm 800 (Cesoia CI10+CS10+RL10) + Edge coils supporting unit (No. of reels) 6 Rough Milling unit RS 10 (Kw 1,3 x 2) Fine Milling unit Softforming RF 10 / SF (Kw 0,65 x 2) Fine Milling unit (Multi-profile) RF 30 (Kw 0,65 x 2) Kdodpfx Aot N Ix Rjg Asu Milling grooving Unit FB 30 (Kw 4,5 x 2) 0 - 90° Profile edge scraping unit (Multi-profile) RB 30 Glue scraping unit RC 05 / Soft Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 2002. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw 2 pcs. SARG Vibration dowel inserting device. 1 pc. vacuum underpressure pump Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request. Kdedpfxet N Rkvj Ag Aeu