Used Bihler Grm-50 for sale (33,745)

Condition: excellent (used), Year of construction: 1978, loading capacity: max. 700 Kg. disc diameter: 1.000 mm coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm Isdpei Hi Swjfx Anweic coil width: max. 120 mm

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, DC welding unit consist of: 1 pce. Welding controller BIHLER B 10 3 pcs. Welding transformer 1 pcs. Cooler unit Welding capacity: 3 x 70 kVA Iodovxkzqopfx Anwsic Capacity of the transformer 70 kVA at 50 % ED Power voltage: 400 V, 50 Hz.

Condition: excellent (used), Year of construction: 1995, Control cabinet für Thread forming unit BIHLER GSE 4.1 Thread dimameter range: M 3- M 8 Ijdpfx Aox Rrqienwoic Spindle stroke: max: 15 mm Roduction rate: max. 120/min

Condition: excellent (used), Year of construction: 1991, laoding capacity: max. 700 Kg. decoiler diameter: 1.000 mm Iedpsuugi Esfx Anwjic coil outside diameter: max. 1.400 kg. coil inside diameter: 260 - 710 mm strip metal width: max. 120 mm

Condition: ready for operation (used), Year of construction: 1971, laoding capacity: max. 250 Kg. coil diameter: max. 650 kg. strip metal width: max. 100 mm Iodedx Rzmspfx Anwoic

Condition: ready for operation (used), Year of construction: 1987, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: 21104, working range: 250 mm, feed length X-axis: 170 mm, overall weight: 1,600 kg, total height: 1,860 mm, pressing force: 7 t, total length: 2,000 mm, total width: 2,500 mm, table width: 184 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, compressed air connection: 6 bar, Bihler Automatic Machine M35 – Year of manufacture 1987 – 7 t press force – ready for operation Iiedpox Tukqofx Anwjc For sale is a Bihler automatic machine, model M35, year 1987, in very good and well-maintained condition. The machine features a press force of 7 tons, a compressed air connection with 6 bar, and has approximately 70,000 operating hours. The automatic machine is fully functional and immediately ready for use. Bihler machines are renowned for their robust, long-lasting construction and reliability in industrial applications. The M35 is ideally suited for stamping, bending, and forming operations. The machine can be inspected under power in our workshop by prior appointment. Spare parts are still readily available.

Condition: used, Year of construction: 1971, operating hours: 85,000 h, functionality: fully functional, machine/vehicle number: 20194, working range: 250 mm, feed length X-axis: 170 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 1,600 kg, total length: 2,000 mm, total width: 2,500 mm, total height: 1,800 mm, input frequency: 50 Hz, input current: 8 A, pressing force: 7 t, compressed air connection: 6 bar, table width: 184 mm, For sale is a Bihler automatic machine, year of manufacture 1971, with approximately 85,000 operating hours. The machine is fully functional and in ready-to-use condition. Bihler automats of this generation are renowned for their extremely robust, long-lasting construction and have been successfully used in industry for decades in stamping, bending, and forming applications. Iodpfsx Tty Dsx Anwoic Despite its age, the machine has proven its industrial reliability and remains economically viable for a variety of applications. A significant advantage is the continued good availability of spare parts, both OEM and aftermarket, ensuring long-term maintenance and support. Ideal for series production, as a replacement or secondary machine, or for simple, robust applications. A live demonstration under power is possible by arrangement.

Condition: ready for operation (used), Year of construction: 1979, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: 24104, working range: 250 mm, feed length X-axis: 170 mm, overall weight: 1,600 kg, total height: 1,860 mm, type of input current: three-phase, pressing force: 7 t, total length: 2,000 mm, total width: 2,500 mm, table width: 184 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, punching force: 7 t, control cabinet width: 410 mm, control cabinet length: 630 mm, control cabinet height: 1,320 mm, compressed air connection: 6 bar, With 70,000 operating hours, it has certainly seen considerable use, but this is not an unusual figure for machines of this type in industrial operation – many remain productive for years with far higher hours if they are properly maintained. Full functionality is assured – the drive has been replaced once. On the positive side, the machine is fully operational, proven in industrial environments, robust, and there are still many spare parts available for older Bihler machines. Iiodpfxox Ttb Ue Anwsc

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Iedpfjh T Ulyjx Anwjic Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole

Year of construction: 1988, condition: used, Bihler B-4/2 Welding Control System. Iiedpfehitxdex Anwsc Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Year of manufacture: 1988/04. Made in Germany. More Bihler and Bruderer machines on stock.

Year of construction: 1988, condition: used, Bihler B-4/2 Welding Control System. Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Iijdpshit E Defx Anwoc Year of manufacture: 1988/04. Made in Germany. More Bihler and Bruderer machines on stock.

Year of construction: 2021, condition: refurbished (used), used grinding flange f. JUNG HF50 / JF520 / JF625 Iijdpfxjhcn I Eo Anwec - cleaned and checked -

Year of construction: 2025, condition: new, coolant unit (paper belt) electrical (plug-in) and mechanicaly prepared f. JUNG HF50 / JF520 / JF625 Iiodpfx Aehcn I Tonwjc - with your inquiry, pleas send us the type of your machine - in stock, subject for prior sale

Condition: used, 50 m3 / 50,000 l horizontal steel tank Iijdpfxoxtmzxs Anwec Diameter: 2.50 m Length: 10 m Weight: 16 t The tank is pressurized. Steel thickness: 20 mm / 2 cm Pressure: up to 20 atmospheres Steel cradles (legs) included

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Iedpsibh S Hjfx Anweic Bottom thickness 12mm Equipped with a ladder.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 700 mm, table length: 500 mm, No minimum price – guaranteed sale to the highest bidder! Machining center with a manually rotatable and swiveling machine table! TECHNICAL DETAILS Travel ranges x-axis: 500 mm Ijdpfszb Uz Dsx Anweic y-axis: 400 mm z-axis: 400 mm Table Table surface: 700 x 500 mm Spindle Tool holder: 40 SK/ISO Spindle speeds: 20 - 4,500 rpm Spindle drive: 12 kW Feed rates Feed rates: 5,000 mm/min Control system: Heidenhain TNC 124 MACHINE DETAILS Total power requirement: 13 kW Machine weight: approx. 2,800 kg Space requirement: approx. 3 x 2 x 2 m

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Isdpfx Aozcwupjnwsic Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Iiedpozcuyijfx Anwsc Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: good (used), Year of construction: 2013, IFP Europe KP 50 HMA Basic Vacuum Parts Washer Mfd. 2013 S/N: 201305-00974 Specifications: Number of Baskets per Wash Cycle 1 Basket Size 11.9″ x 7.9″ x 17.7″ Machine Dimensions 70″ x 103″ x 70″ Chiller Size 5 ton Solvent Capacity 106 Gallon Wash Cycles Per Hour 4 to 8 Chamber “Max. Load Weight” 110 lbs Machine Weight 4,000 lbs Equipped With: Rotos & Vane Pumps, Liquid Ring Tank, Rust Inhibitor Tank Filter, Waste Oil Separator, Siemens Touch Screen Control, Budzar BWA-AC-05-FCB-12-0-000 5-HP Chiller, Iijdpfx Asx Ddc Ijnwjc Safety Guarding, Light Curtains, Automatic Door, (3) Wash Settings, Rust/Vap/Mist/Vac/Oscillation Settings, 100-Lb. Batch Weight Repairs necessary: Pumps C301.00020 DVP LC106 Vane Pump — $5,500.00 C301.00078 Liquid Ring Pump — $3,561.55 C301.00081 RBS 45 Rotary Lobe Pump — $13,500.00 Pump Subtotal: $22,561.55 Accessories / Pipes for Conversion A508.00031 — $287.50 A508.00012 — $287.50 A508.00013 — $345.00 Accessories Subtotal: $920.00 Grand Total $23,481.55

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: W0109111, working width: 1,400 mm, stack height: 1,800 mm, product height (max.): 80 mm, Automatic wrapping machine, Ream wrapper mid-speed wrapping of all metric and standard U.S. ream sizes including half-ream packages. Machine capable of wrapping paper reams ranging in dimensions from 297 x 420 mm (A3) up to 1000 x 1400 mm. The machine ensures maximum flexibility thanks to its quick changeover features. The reams are manually feed by the operator, who controls all the machine's operations. The reams are wrapped in polyethylene or kraft paper, pre-cut into the sheets required for wrapping. Afterwards, the reams are stacked and placed in the collection station. The set of rolls can be installed on either the right or left side of the machine upon request. Ijdpey Ufh Nsfx Anwjic

Condition: used, Year of construction: 2009, Doosan Mynx 750/50 4 Axis Vertical Machining Centre with Fanuc Series 21i-MB CNC Control, Kitagawa MR320RAE04 4th Axis Unit 310mm 3 Jaw Chuck, Table Size 1600mm x 750mm, 40 Tool ATC, BT50 Spindle Taper, Filtermist FX7002 Oil Mist Extractor, Kaukan Chiller Unit, Profluid MCF 20 Coolant Pressure Filter Unit, Machine Weight 13500kg. S/No. MYNX 7500373 (2009) Includes Work Bench, Vice and Various BT50 Spindle Tool Holders. Country of Origin: Korea Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchase Ijdpfx Ajzdtlronwjic

Year of construction: 2016, condition: used, Year of manufacture: Nov 2016 Isdpfxjxvbgbo Anweic New: No GEBRUIKTE TRAILER BANDEN 12 MM 11 MM 250 EURO 7/8 MM 150 EURO 4/5 MM 100 EURO

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 971955, total length: 3,500 mm, total width: 2,200 mm, type of input current: three-phase, product height (max.): 125 mm, product length (max.): 1,420 mm, product width (max.): 500 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 32 A, power: 11.2 kW (15.23 HP), film width: 540 mm, ZAPPE SKA 50/140 Skin Packaging Machine – Industrial Quality, Lightly Used For sale: a robust and reliable skin packaging machine from ZAPPE, model SKA 50/142 (90), year of manufacture 1997. This semi-automatic machine is designed for professional vacuum skin packaging (VSP). It is ideal for technical components, tools, retail displays, and small to medium production runs. Specifications: • Working area: 50 × 142 cm (also usable at 50 × 90 cm) • Suitable for multiple packages simultaneously • Vacuum Skin Packaging (VSP) • Semi-automatic operation • Solid industrial construction Condition: Iiedoy I Udmepfx Anwoc The machine has seen little use and is in very good overall condition. Ready for immediate operation. Applications: • Metal and engineering industries • Retail and display packaging • Small production batches Advantages: • Strong product fixation • Clear, professional presentation • Flexible use for various product shapes Viewing is possible by appointment.

Year of construction: 2024, condition: new, functionality: fully functional, We offer this UK Exchangers Ltd UKE-8-4PV-8 - (50 kW) 8 Plates, Packaged Heat Exchanger, year of construction 2024. With Control Panel, Pump, Thermostat and ESBE Actuator This heat exchanger is new, not needed for the job but has been held in storage for a couple of years. As you can see from 1 of the photos the attached thermostat controller has a crack at the cable entry point. WRAS Approved Model type: UKE-8-4PV-8 Thermal capacity: 50 kW Number of plates: 8 Serial number: C-54778/1 Year of manufacture: 2024 Design pressure side 1: 10 bar g Design pressure side 2: 10 bar g Design temperature side 1: 99 °C Design temperature side 2: 85 °C Iijdpszbrv Esfx Anwjc Test pressure side 1: 15 bar g Test pressure side 2: 15 bar g Volume side 1: 1 L Volume side 2: 1 L If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, mileage: 150 km, power: 120 kW (163.15 HP), first registration: 06/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,400 mm, loading space width: 2,100 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * App-Connect Wireless (or via cable) * Manual air conditioning * Double passenger seat with storage compartment * Digital cockpit * Automatic windshield wiper control * Cruise control * Fuel tank 75L * Reinforced front axle Iiodpfx Anoy S Nhnswjc * Reinforced suspension and stabilizers * Central locking with keyless start * Multifunction display "Plus" * Rear window and interior mirror with dimming function * Storage package 2 * Lockable, illuminated glove compartment * Preparation for We Connect & We Connect Plus * Electrically adjustable and heated exterior mirrors * Multifunction steering wheel * Driver's seat "ergoComfort" * Reinforced AGM battery and generator * Fabric upholstery "Austin" * Fog lights with cornering lights * Battery switch * Electrical connection rail Safety: * Summer tires * Front airbags for driver and passenger * Traffic sign recognition * Front Assist * Lane-keeping assist * Hill-start assist * Side marker lights * Electronic immobilizer * Direct tire pressure monitoring system * Tool kit and jack * Daytime running lights * Spare wheel * Driver fatigue detection * Emergency call system "eCall" * Start-stop system * Electric parking and emergency brake * Reverse warning sound * Preparation for reversing camera * Extended exterior mirrors Platform: * Aluminum frame with screen-printed floor * Aluminum side panels, completely removable * Tie-down points in the floor * 2 small storage boxes under the platform * Cab protection with ladder rack * Side underrun protection * Wheel arch protection with mud flaps * Trailer coupling up to 3.5t trailer load (trailer coupling ball head, trailer coupling socket 12V 13-pin) Additional extras related to the platform are available at an extra cost. Note: Please call briefly before your visit – we will ensure that your desired vehicle is on site. If it is not located in Wachtendonk, we will gladly deliver it from our stock. Individual customization of the platform is possible upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale reserved. Best regards, Pimenta Automobile