Used Bilwinco Multihead Scale for sale (2,566)

Condition: new, Tactile probe measuring instrument, probe tip 0.8mm, resolution 0.01mm, KÄFER * Accuracy according to DIN 2270 * However, accuracy is 5 µm * Tactile lever movement can be switched * Mounting on the upper or lower collet, Ø 8 mm h6 * Rotatable scale, measuring insert with 2.3 mm steel ball * Other technical features: Measuring insert can be swiveled by 110° – parallel to the dial Outer ring diameter: 28 mm Certificate: without factory calibration Resolution: 0.01 mm Measuring range: 0.8 mm Measuring insert length: 12.3 mm Design: Measuring insert can be swiveled by 110° – parallel to the dial Model: Tastboy Neds Ab E Azspfx Ab Relh

Condition: new, ERGOLINE L.50m measuring tape Tape width: 13 mm A mm/cm, EG II, aluminum, yellow Steel measuring tape, BMI · In a V-shaped frame made of lightweight metal · Anodized · Tape housing made of rust-resistant steel, yellow painted · Printed scale with polyamide protective coating · Printed mm scale to the end of the tape · Ball-bearing mechanism · Ergonomic shape with grip knobs · Foldable crank arm and parking position for the beginning of the tape to protect against damage during transport · Very high abrasion resistance · With Flextop start fitting made of transparent, highly flexible plastic, which reliably reduces breakage at the beginning of the tape · EC accuracy class II Tape width: 13 mm Length: 50 m Measurement start: A Nedps Ab E E Nsfx Ab Rjlh

Condition: new, Hose level, 20m ±1 mm/20m HEDUE Nlsdpo Ab E Hmsfx Ab Rjh · electronic · complete with 20 m hose in a plastic case · acoustic signal when the measuring mark is reached · the 20 m long hose can always remain filled with water · measuring accuracy ± 1 mm at 20 m · battery: 9V block battery · further technical features: accuracy: ±1 mm/20 m Length: 20 m

Condition: new, Depth gauge, DIN 862, DIGI-MET IP67, 200mm, H.PREISSER · Digital · IP67 · With straight measuring scale · With locking screw Functions: On/off switch · QuickStart electronics · QuickLock function for one-time zeroing and key lock to prevent accidental button presses · Zero point setting at any position · With variable data output: USB, RS 232, Digimatic · Further technical features: Measuring scale cross-section: 12 x 4 mm Bridge length: 100 mm Nlodj Ab Etaepfx Ab Rjh Measuring scale cross-section: 12 x 4 mm Measuring range: 200 mm DIN: 862 Resolution: 0.01 / 0.0005 mm

Condition: new, Torque wrench 721/30 Quick 1/2 inch 60-300 Nm STAHLWILLE · with permanently installed ratchet · for controlled tightening in a clockwise direction · with release mechanism · quick adjustment via clamping lever in the handle · adjustment element with integrated magnifying glass in the reading window · double stop signal · dual scale Nm/ft·lb · accuracy ± 4 % tolerance of the set value Nlodpfx Aj Ab Dg Seb Rjh · special feature: no need to reset to "0", as the measuring element is only loaded during the tightening process · continued loading after release or loads acting against the direction of operation, e.g. with seized screws, do not affect the release mechanism Delivery includes calibration certificate, operating instructions, in a transparent plastic tube Scale division Nm: 10 Drive square: 1/2" Output square: 42767 Drive square mm: 12.5 Working range: 50 - 220 Length mm: 553 Working range N.m Nm: 60 - 300 Material: Chrome-alloy steel Output square mm: 12.5

Condition: new, HEUER Compact Parallel Vise, Jaws B.120mm, Clamping Width 130mm, Steel HEUER · With quick adjustment · Only 4.5 kg weight · 10 kN clamping force · Ideally suited for mobile and stationary use · Made in Germany Njdpj Ab Dpyjfx Ab Rjlh Special product advantages: - The HEUER Quicklaunch quick adjustment enables opening and closing by 130 mm in just a few seconds, without operating the spindle. - The interchangeable, reversible jaws with smooth and ribbed clamping surfaces are hardened and galvanized. - Clamping range indicator with scale for easy pre-setting of the clamping jaws. - Integrated pipe clamping jaws for pipes from 5/8" to 2" (15-50 mm). · Supplied without table clamp. Clamping depth: 65 mm Clamping width: 130 mm Jaw width: 120 mm

Condition: new, Workshop measuring caliper, DIN 862, 300mm, with parallel measuring jaws, parallax-free · With measuring jaws · Nonius and scale calibrated with laser for high accuracy and with a matte chrome finish · With locking screw · For internal and external measurements; hole measuring attachment for internal measurements = 10 mm · Other technical features: Scale: parallax-free reading · Reading type: analog Design: with measuring jaws DIN: 862 Resolution: 0.05 mm Scale: parallax-free reading Nljdpfxj Ab Eqfs Ab Rjh Measuring range: 300 mm Jaw length: 90 mm

Condition: new, Dial indicator M2/50T, 50mm, resolution 0.01mm, large measuring range, KÄFER · With a large measuring range · Accuracy according to factory standard · Dimensions according to DIN EN ISO 463 · In this dial indicator, the centrally arranged millimeter scale enables secure and easy reading · The measuring mechanism is mounted on ruby bearings at critical points · Shank (Ø 8 mm h6) and measuring pin made of stainless steel · Adjustable tolerance markers · Outer ring diameter: 58 mm · Further technical specifications: 1 pointer revolution: 1.0mm Outer ring diameter: 58 mm 1 pointer revolution: 1.0 mm Nledps Ab Expjfx Ab Rsh Measuring range: 50 mm Certificate: without factory calibration Resolution: 0.01 mm Model: M2 / 50T

Condition: new, Dial indicator M2/30T, 30mm, resolution 0.01mm, large measuring range, KÄFER · With a large measuring range · Accuracy according to factory standards Nlsdpfxe Ab E Dlj Ab Reh · Dimensions according to DIN EN ISO 463 · This dial indicator features a centrally positioned millimeter scale, enabling secure and easy reading · The measuring mechanism is supported by ruby bearings at critical points · Clamping shank (Ø 8 mm h6) and measuring pin made of stainless steel · Adjustable tolerance markers · Outer ring diameter: 58 mm · Further technical specifications: 1 pointer revolution: 1.0 mm 1 pointer revolution: 1.0 mm Measuring range: 30 mm Resolution: 0.01 mm Model: M2 / 30T Certificate: without factory calibration Outer ring diameter: 58 mm

Condition: new, Feel gauge, model K 33, 0.5 mm, resolution 0.01 mm, KÄFER Nlsds Ab E D Ejpfx Ab Roh * Accuracy according to DIN 2270 * Automatic switching of the measuring direction * Essential bearing points of the measuring mechanism are mounted in precision bushings * Mounting of the feeler lever shaft in precision ball bearings * Hard chrome-plated housing * Antimagnetic display (ordinary magnetic fields have no influence on the reading) * Three milled dovetail guides for mounting the clamping shank * Rotatable scale * Measuring insert with 2 mm carbide ball * Measuring insert thread M1.6 * Further technical features: Design: Measuring insert can be pivoted at a right angle to the dial Resolution: 0.01 mm Graduation: 0-25-0 Outer ring diameter: 32 mm Design: Measuring insert can be pivoted at a right angle to the dial Certificate: without factory calibration Measuring range: 0.5 mm Measuring insert length: 35.7 mm Model: K 33

Condition: new, Feeler gauge K 32, 0.8 mm, resolution 0.01 mm, KÄFER · Accuracy according to DIN 2270 Nlodpfj Ab Excox Ab Roh · Automatic switching of the measuring direction · Essential bearing points of the measuring mechanism are mounted in precision bore bushings · Mounting of the feeler lever shaft in precision ball bearings · Housing hard-chrome plated · Antimagnetic display (ordinary magnetic fields have no influence on the reading) · Three milled dovetail guides for mounting the clamping shank · Rotatable scale, measuring insert with 2 mm carbide ball, measuring insert thread M1.6 · Other technical features: Design: measuring insert can be pivoted backwards towards the dial Model: K 32 Resolution: 0.01 mm Outer ring diameter: 32 mm Graduation: 0-40-0 Measuring insert length: 12.8 mm Certificate: without factory calibration Measuring range: 0.8 mm Design: measuring insert can be pivoted backwards towards the dial

Condition: new, Torque wrench 8581-01, 1 inch, 600-1500 Nm, GEDORE · All-metal construction made of high-strength aluminum alloy · With fixed drive square · Handle made of aluminum · Right-hand thread · Combined dual scale N.m/. · Housing made of light metal · Heavily stressed parts made of special steel · Audible and tactile release signal · Quick adjustment via ergonomic adjustment knob · Release accuracy ± 3% tolerance from the set scale value · No value shifts or influence on accuracy due to two-handed operation or confirmations outside the handle (as with conventional torque wrenches), since both the drive square and the pivot point lie on the same axis, resulting in high application safety · Extendable to reduce workload · Design 1. Standard (with square drive) 2. with extension tube 3. with extension tube and double square 4. with double square 5. with 2 extension tubes · Other technical features Design: 2 Nledps Ab Hp Aefx Ab Reh Weight g: 10800 Drive square mm: 25 Working range N.m cN.m Nm: 600-1500 Length mm: 932 Height mm: 40

Condition: new, Traction force sensor, measuring range 0-100 t, digit increment 50 kg, with digital display and wireless transmission. * Traction force sensors can be used universally, whether for measuring tensile forces or as a crane scale. * They always offer a cost-effective solution for a wide range of applications. * They can be combined with a shackle or a hook as a direct means of attaching the load. * Easy to handle. * Good readability. * Optional display of the applied, current load as a gross or net value, or the maximum value. * Overload warning at 110% of the gross rated load. * Robust design. * Maximum value memory. * Automatic zeroing. * Measuring accuracy of 0.1% of the end value. * Automatic shutdown. * Display of the battery status. * Includes batteries, operating time approx. 200 hours. Nedpfx Ao Ab Ia Ajb Relh * Includes test certificate. Design: with digital display and wireless transmission Weight: 39.3 kg Measuring range up to: 0-100 t Digit increment: 50 kg

Condition: new, Traction force sensor, measuring range 0-2.5 t, digit increment 1 kg, with digital display. * Traction force sensors can be used universally, whether for measuring tensile forces or as a crane scale. * They always offer a cost-effective solution for a wide range of applications. * They can be combined with a shackle or a hook to provide a direct means of attaching the load. * Easy to use. * Good readability. * Optional display of the applied, current load as a gross or net value, or of the maximum value. * Overload warning at 110% of the gross rated load. * Robust design. * Maximum value memory. * Automatic zeroing. * Measurement accuracy at the end value: 0.2%. * Automatic shutdown. * Display of the battery status. * Includes batteries, operating time approx. 200 hours. * Includes test certificate. Design: with digital display Njdpfxo Ab H Uls Ab Relh Weight: 1.7 kg Measuring range up to: 0-2.5 t Digit increment: 1 kg

Condition: new, Torque wrench 8574-10, 3/4 inch, 110-550 Nm, GEDORE · All-metal construction made of high-strength aluminum alloy Nledo Ab Awvepfx Ab Reh · With fixed drive square · Handle made of aluminum · Right-hand thread · Combined dual scale N.m/ · Housing made of lightweight metal · Stressed parts made of special steel · Audible and tactile release signal · Quick adjustment via ergonomic adjustment knob · Release accuracy ± 3% tolerance from the set scale value · No value shifts or influence on accuracy through two-handed operation or confirmations outside the handle (as with conventional torque wrenches), since both the drive square and the pivot point are on the same axis, resulting in high application safety · Extendable to reduce workload · Design: 1. Standard (with square drive) 2. with extension tube 3. with extension tube and double square 4. with double square 5. with 2 extension tubes · Other technical features Design: 1 Working range N.m: 110 - 550 N.m Drive square: 3/4 inch Length: 812 mm Scale division: 10 Scale division N.m cN.m: 10 N.m Design: 1 Drive square mm: 20.0 mm Working range: 80 - 405

Condition: new, Torque wrench 8572-01, 1 1/2 inch, 1500-3000 Nm, GEDORE · All-metal construction made of high-strength aluminum alloy · With fixed drive square · Handle made of aluminum · Right-hand thread · Combined dual scale N.m/ · Housing made of lightweight metal · Highly stressed parts made of special steel · Audible and tactile release signal · Quick adjustment via ergonomic adjustment knob · Release accuracy ± 3% tolerance from the set scale value · No value shifts or influence on accuracy due to two-handed operation or confirmations outside the handle (as with conventional torque wrenches), since both the drive square and the pivot point are on the same axis, resulting in high application safety · Extendable to reduce workload · Design 1. Standard (with square drive) 2. with extension tube 3. with extension tube and double square 4. with double square 5. with 2 extension tubes · Other technical characteristics Design: 5 Drive square mm: 40.0 mm Working range N.m: 1,500 - 3,000 N.m Nodpfx Ae Ab Axaob Rjlh Length: 1423 - 2343 mm Drive square: 1 1/2 inch Design: 5 Scale division N.m cN.m: 50 N.m

Condition: new, Torque wrench 8568-10 3/4 inch 155-760 Nm GEDORE · All-metal construction made of high-strength aluminum alloy · with fixed drive square · handle made of aluminum · right-hand thread · combined dual scale N.m/. · housing made of light metal · highly stressed parts made of special steel · audible and tactile release signal · quick adjustment via ergonomic adjustment knob · release accuracy ± 3% tolerance from the set scale value · no value shifts and no influence on accuracy due to two-handed operation or confirmations outside the handle (as with conventional torque wrenches), since both the drive square and the pivot point lie on one axis, resulting in high application safety · extendable to reduce workload · Design 1. Standard (with square drive) 2. with extension tube 3. with extension tube and double square 4. with double square 5. with 2 extension tubes · Other technical features Design: 4 Working range: 100 - 560 Length: 812 mm Scale division N.m cN.m: 10 N.m Scale division .: 10 Working range N.m: 140 - 760 N.m Design: 4 Nsdpfx As Ab Axmsb Relh Drive square: 3/4 ? Drive square mm: 20.0 mm

Condition: new, Backpack sprayer RS125, capacity 12 liters, max. pressure 6 bar, weight 4.8 kg, MESTO · Practical plastic container with liter scale · Easy-to-operate piston pump · Brass spray lance, 50 cm, with fine nozzle · Lance can be rotated continuously to adjust the angle · Spare nozzle and seals Nlodpfx Abe Ab Adpe Roh · Filling cap with integrated measuring cup and anti-spill protection · Ergonomically shaped handle, adjustable in length · Extra-large filling opening with filter · Large base for secure stability, even on uneven surfaces · Pump lever adjustable in width, can be mounted on the left or right · Reliable holder for the spray lance · Practical spray shield holder on both sides · Ergonomically shaped back panel (on the container) · Spray lance can be adjusted 360° · Ergonomically shaped shut-off valve with pressure gauge · Applications: garden and agriculture · Other technical features: weight: 4.8 kg · Material: plastic Operating pressure: 6 bar Capacity: 12 liters

Condition: new, Features * Transparent saw blade guard for increased safety. * The Ø 250 mm carbide-tipped saw blade with 24 teeth can be adjusted in height up to approx. 85 mm and beveled continuously up to 45° via the easy-to-operate handwheel. * The sturdy base ensures high stability. * The practical crosscut and miter fence can be adjusted up to 60°. * The robust steel saw table guarantees a long service life. * The longitudinal fence with magnifying glass can be quickly locked and is guided on a profile rail with an mm scale. Nsdpfxo Abrrps Ab Rslh * There are 2 connections for chip extraction – directly on the saw blade guard and on the housing. * Includes push stick, tools, longitudinal fence with magnifying glass, crosscut and miter fence. Technical data AC motor 230 V ~ 50 Hz Power P1 (S6-25%) 1800 W Idle speed 5000 min-1 Mains fuse 10 A slow-blow Carbide-tipped saw blade Ø 250 mm Blade bore Ø 30 mm Cutting height at 90° approx. 85 mm Bevel adjustment (swivel range) 0° - 45° Crosscut and miter fence 0° - 60° Table height (with base) 830 mm Motor overload protection switch yes Dust extraction device yes Sound pressure level at the workplace during machining LPA 94 dB (A) Measurement uncertainty factor K 3.0 dB (A) Sound power level during machining LWA 107 dB (A) Weight approx. 17 kg

Condition: new, Features      - The robust, continuously adjustable rotating aluminum saw table is equipped with a locking function for frequently used miter angles,      an angle scale, and a workpiece stop.      - Thanks to the rotating saw table, the continuously adjustable saw head on the left side (0° - 45°), and the integrated        cut depth adjustment, the saw can be used in a variety of ways. Miter and double miter cuts, as well as the creation of grooves,        are possible with this saw.      - Increased safety during work is provided by the additional, adjustable auxiliary stop, the versatile workpiece clamp, and the workpiece supports, so that even larger and taller workpieces can be processed safely.      - The double-bearing pull function enables cutting widths of up to 310 mm.      - The integrated laser ensures precise cutting guidance.      - Frame made of aluminum.      - Includes chip collection bag, auxiliary stop, workpiece supports (2 pieces), workpiece clamp, and assembly wrench. Technical data AC motor 230 V ~ 50 Hz Power P1 (S1) 2000 W No-load speed n0 4800 min-1 Nljdps Abrrcsfx Ab Reh Carbide-tipped saw blade (60 teeth) Ø 305 x 30 x 3.0 mm Miter angle (left) 0° - 45° Miter angle (right) 0° - 45° Saw head tilt (left side) 0° - 45° Workpiece cross-section max. 90 x 310 mm Laser cutting guide yes Sound pressure level LPA 98.5 dB (A) Measurement uncertainty factor K 3.0 dB(A) Sound power level during operation LWA 111.5 dB (A) Measurement uncertainty factor K 3.0 dB(A) Weight approx. 18 kg Weight (with base frame) approx. 23 kg

Condition: new, Hygiene protective screen to prevent the transmission of pathogens - transparent plastic film, 2 mm thick, 1,500 mm high - flat base feet, 500 mm deep - conveniently packaged in 1 box - stands available in 4 colors - reduces the transmission of pathogens - film is easy to wipe clean - can be easily expanded thanks to its modular design - easy assembly in just 3 steps - application areas: supermarkets, schools, museums, workplace, office, sales areas, assembly workstations, waiting rooms, etc. Cleaning and care tips For cleaning soiled soft PVC surfaces, we recommend using solvent-free cleaners, such as mild soapy water. Due to the chemical incompatibility with organic solvents, the use of strong solvents for cleaning should be strictly avoided. No corrosive, aggressive chemicals/cleaning agents or oil-containing liquids may be used. Important: the substance should not be used in too high a concentration and should be as neutral as possible. Nodpe Abqfnefx Ab Rjlh We recommend: Test your cleaning agent and cleaning method in a small area before carrying out large-scale cleaning. Temperature resistance: -20°C to +50°C

Condition: new, Hygiene protective screen to prevent the transmission of pathogens - transparent plastic film, 2 mm thick, 1,500 mm high - flat base feet, 500 mm deep - conveniently packaged in 1 box - stands available in 4 colors - reduces the transmission of pathogens - film is easy to wipe clean - can be easily expanded thanks to its modular design - easy assembly in just 3 steps - application areas: supermarkets, schools, museums, workplace, office, sales areas, assembly workstations, waiting rooms, etc. Cleaning and care tips For cleaning soiled soft PVC surfaces, we recommend using solvent-free cleaners, such as mild soapy water. Due to the chemical incompatibility with organic solvents, the use of strong solvents for cleaning should be strictly avoided. No corrosive, aggressive chemicals/cleaning agents or oil-containing liquids may be used. Important: the substance should not be used in too high a concentration and should be as neutral as possible. We recommend: Test your cleaning agent and cleaning method in a small area before carrying out large-scale cleaning. Temperature resistance: -20°C to +50°C Nledj Abqfuopfx Ab Rsh

Condition: new, Hygiene protective screen to prevent the transmission of pathogens - transparent plastic film, 2 mm thick, 1,500 mm high - flat base feet, 500 mm deep - conveniently packaged in 1 box - stands available in 4 colors - reduces the transmission of pathogens - film is easy to wipe clean - can be easily expanded thanks to its modular design - easy assembly in just 3 steps - application areas: supermarkets, schools, museums, workplace, office, sales areas, assembly workstations, waiting rooms, etc. Cleaning and care tips For cleaning soiled soft PVC surfaces, we recommend using solvent-free cleaners, such as mild soapy water. Neds Abqf Ispfx Ab Rolh Due to the chemical incompatibility with organic solvents, the use of strong solvents for cleaning should be strictly avoided. No corrosive, aggressive chemicals/cleaning agents or oil-containing liquids may be used. Important: the substance should not be used in too high a concentration and should be as neutral as possible. We recommend: Test your cleaning agent and cleaning method in a small area before carrying out large-scale cleaning. Temperature resistance: -20°C to +50°C

Condition: new, Hygiene protective screen to prevent the transmission of pathogens Attachment module - transparent plastic film, 2 mm thick and 1,500 mm high - flat stand base, 500 mm deep - conveniently packaged in 1 box - stand available in 4 colors - reduces the transmission of pathogens - film is easy to wipe clean - can be expanded as needed thanks to its modular design - easy assembly in just 3 steps - areas of application: supermarkets, schools, museums, workplace, office, sales areas, assembly workstations, waiting rooms, etc. Cleaning and care tips Nsdpfx Ao Abqgfob Rslh For cleaning soiled soft PVC surfaces, we recommend using solvent-free cleaners, such as mild soapy water. Due to the chemical incompatibility with organic solvents, the use of harsh solvents for cleaning should be avoided. No corrosive, aggressive chemicals/cleaning agents or oil-containing liquids may be used. Important: the substance should not be used in too high a concentration and should be as neutral as possible. We recommend: Test your cleaning agent and cleaning method in a small area before carrying out large-scale cleaning. Temperature resistance: -20°C to +50°C

Condition: new, Hygiene protective screen to prevent the transmission of pathogens Attachment module - transparent plastic film, 2 mm thick and 1,500 mm high - flat stand base, 500 mm deep - conveniently packaged in 1 box - stand available in 4 colors - reduces the transmission of pathogens - film is easy to wipe clean - can be expanded as needed thanks to its modular design - easy assembly in just 3 steps - areas of application: supermarkets, schools, museums, Nodpfxs Abqgls Ab Rjlh workplace, office, sales areas, assembly workstations, waiting rooms, etc. Cleaning and care tips For cleaning soiled soft PVC surfaces, we recommend using solvent-free cleaners, such as mild soapy water. Due to the chemical incompatibility with organic solvents, the use of harsh solvents for cleaning should be avoided. No corrosive, aggressive chemicals/cleaning agents or oil-containing liquids may be used. Important: the substance should not be used in too high a concentration and should be as neutral as possible. We recommend: Test your cleaning agent and cleaning method in a small area before carrying out large-scale cleaning. Temperature resistance: -20°C to +50°C