Used Blades For Hydraulic Guillotine Cnta 315 for sale (27,265)

Condition: excellent (used), functionality: fully functional, cutting length (max.): 2,600 mm, AUTOMATIC HYDRAULIC GUILLOTINE fo veneer model MONGUZZI TRA 2600 second hand machine volt. 380/50 working conditions : good technical details : max. useful cutting length mm. 2650 max. useful cutting heigth mm. 100 max. useful cutting width mm. 1000 Bljdpfx Aofftuwjhmen min. useful cutting width mm. 40 hydraulic motor power Hp 5,5 net weigth kgs. 2600 CE mark : NO

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Bodpfxezh Dtzs Ahmeln Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Condition: good (used), Perfecta 92 Paper Cutting Guillotine The machine is in very good condition, serviced and ready to use. Technical Specifications: Cutting width: 920mm Stack height: 120mm Minimum scrap: 18mm Weight: 2300kg Power supply: 400V Equipment: – Brand new programmer and complete control system – New photocells – Air table Bjdpfxozw Tx Se Ahmjln – Hydraulic clamp with variable force adjustment – Side tables – Tool kit – Spare blade

Condition: good (used), Code: 0583 Brand: RAVNE Model: 3700 Bljdpod Im I Refx Ahmon Integral steel Knife (blade) for veneer guillotine mm 3600 Length mm 3700 Height mm 110 Thickness mm 12

Condition: used, Year of construction: 2018, operating hours: 6,000 h, functionality: fully functional, We are offering this used FOR REC Rotary Shear FX5000 4x90 KW, manufactured in 2018. Make: FOR REC Model: Rotary Shear FX5000 4x90 KW Year of manufacture: 2018 Condition: used Operating hours: 6000 The supply includes: - FOR REC FX5000 rotary shear complete with hopper and discharge chute. - Remote control Bljdpfx Aozf Adgohmen - Electrical control panel with HMI touchscreen and existing connection cables - Hydraulic power unit 4x90 KW complete with oil cooling system and existing hydraulic hoses - Documentation (User Manual, Electrical and Hydraulic Diagrams) - 1 set of spare rotors with new blades installed - Other spare wear and replacement parts If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, control type: NC control, actuation type: hydraulic, controller manufacturer: ESA, working width: 3,050 mm, sheet thickness (max.): 4 mm, back gauge adjustment: motor-driven, type of input current: three-phase, Equipment: emergency stop, finger protection, foot remote control, type plate available, OLEOTECNICA hydraulic guillotine shear Working cutting length: 3050 mm Maximum cutting thickness: 4 mm ESA programmer for dimension display Motorized backgauge Bjdpfeyqwhfsx Ahmoln Safety guards.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 621307509, actuation type: hydraulic, controller model: Delem DAC-350, working width: 3,080 mm, sheet thickness (max.): 10 mm, TECHNICAL DETAILS Max. sheet thickness: 10 mm Max. working width: 3,080 mm Cutting speed: 20 mm/min MACHINE DETAILS Control: Delem DAC-350 Drive type: Hydraulic Power: 30.0 kW Dimensions & Weight Transport dimensions (L x W x H): 4,985 x 2,400 x 2,200 mm Weight: 11,500 kg Transport packages: 1 pc. EQUIPMENT Backgauge type: Electric Bedey Avu Njpfx Ahmoln Sheet support system: Pneumatic Finger guard: Fixed with flip-up safety guard Angle adjustment: Motorised Cutting gap adjustment: Motorised Table type: Ball table Documentation CE marking

Condition: good (used), Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades -Cutting blades: Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm Blsdpjxf Dpkofx Ahmon -Total weight: 57 kg

Condition: used, functionality: limited functionality, Year of construction: 1982, Maximum Cutting Thickness: 16 mm (approx. 5/8") for mild steel. Bjdpfx Aheykl Nkjmjln Maximum Cutting Width: 3150 mm (approx. 10.3 feet). Total Machine Weight: Approximately 24,000 kg (24 tons). Cutting Angle: Fixed at 2°. Drive Type: Mechanical drive with a robust, rigid frame construction. Hold-down System: Typically features hydraulic hold-downs to secure uneven sheets during the cutting process.

Condition: good (used), Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 870 mm -Hole spacing: 250 mm / Ø23 mm see photos -Quantity: 12x replacement blades available -Price: per piece -Dimensions: 870/23/H90 mm Bljdpfxjy Akfcs Ahmjn -Weight: 13.5 kg/pc.

Condition: good (used), Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 1290 mm -Hole spacing: 240 mm / Ø13 mm see photos -Quantity: 8x replacement blades available Bsdpfjy Akchex Ahmjln -Price: per piece -Dimensions: 1290/15/H70 mm -Weight: 10.3 kg/pc.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, working width: 3,060 mm, stroke rate (min.): 12 1/min, sheet thickness (max.): 10 mm, back gauge: 1,000 mm, overall weight: 11,400 kg, TECHNICAL DETAILS Sheet width: 3,060 mm Sheet thickness: 10 mm Stroke rate: 12 strokes/min Electric back gauge: 1,000 mm MACHINE DETAILS Control manufacturer: Siemens Total power requirement: 22 kW Dimensions & Weight Space required: approx. 4,100 x 2,300 x 2,400 mm Bodpfsyhmgrsx Ahmsln Machine weight: approx. 11,400 kg EQUIPMENT Foot switch

Condition: new, Year of construction: 2024, Hydraulic shear MVD I-SHEAR C 3100 – 10 complete with pneumatic sheet support at the rear. CNC ESA S 625 TOUCH SCREEN CUTTING ANGLE ADJUSTMENT AUTOMATIC BLADE GAP ADJUSTMENT Cutting capacity for 450N/mm2 material: 10 mm Cutting capacity for 700N/mm2 material: 6 mm Cutting length: 3100 mm Distance between uprights: 3600 mm Variable cutting angle: 0.5 - 3° Sheet clamping cylinders: 14 Strokes per minute: 7 – 13 Throat: 250 mm Motor power: 22 kW Graduated square and two sheet supports: 1000 mm Bjdpjfh R Ilofx Ahmsln Rear gauge stroke: 1000 mm with PNEUMATIC SHEET SUPPORT. Approximate weight: 10.5 tons

Condition: used, Year of construction: 1994, total length: 4,100 mm, total width: 1,900 mm, total height: 1,750 mm, Colour: Blue Weight: 6.500 kg - Year: 1994 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 10.769/94 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 16.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3150 - Throat depth [mm]: 160 - Backgauge depth [mm]: 1000 - Options: Digital readout - Transport dimensions: 4100mm x 1900mm x 1750mm (l x w x h) - Transport weight [kg]: 6500kg Bodpfx Ahoy Nk R Ssmeln - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press Bodpfx Ahsy Uiyvsmeln This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Bsdpfx Aez Hd R Iehmoln Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: new, Year of construction: 2026, Timely delivery, trustworthy equipment ! With the help of CNC technology, we are able to expand our product range and produce much more precisely. Our new product line is evidence of this: hand guillotine, guillotine shears, guillotine shears GLT/R 3050\1,2:. - cutting knife: thermally processed tool steel NC10 - all basic elements of construction: steel profiles 18G2A - the manual drive with the cam mechanism. The guillotine is made in CNC technology, which guarantees precise cutting, high productivity and long-term and trouble-free operation. Max. working width: 3050 mm For steel plates: up to 1.2 mm Dimensions: L: 3500, W: 1500, H: 1000 mm Weight: about 600 kg max. cutting thickness: 1.2 mm (steel) Cutting blades: NC10 Backgauge system with Scala open design suitable for endless cuts large cast work table CE - tested quality Declaration of Conformity Delivery date: every week Bljdpfx Aehuiv Eohmjn We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: used, Hydraulic Shear COMESSA type CP 316 Capacity: 3000 x 16 mm Back gear gauge travel: 1000 mm Throat depth: 500 mm Motor power: 35 CV Adjustable blades Bledpfoz Hwikex Ahmon 4 cutting blade Voltage: 380 V Dimensions (L x W x H): 3500 x 2200 x 2400 mm Weight: 16,5 T

Condition: used, Year of construction: 1985, sheet width 1000 mm plate thickness 5,0 mm distance between columns 1100 mm 1010 mm Cutting length variabel mm Bedpezhn Ucefx Ahmsln cutting gap adjustment variabel mm connected load 5,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 1,6 x 1,7 m Hydraulic guillotine shear with - Cutting gap adjustment - Support arms - Squaring arm

Condition: used, Year of construction: 1994, sheet width 3050 mm plate thickness 16 mm distance between columns 3050 mm 15-1000 mm cutting angle adjustment ja ° cutting gap adjustment ja mm connected load 30 kW weight of the machine ca. 14,.5 t dimensions of the machine ca. 4,0 x 260 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function Bledpfexz Hg Dex Ahmjn - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, stroke length: 800 mm, ram plate width: 1,200 mm, ram plate length: 2,200 mm, overall weight: 100,000 kg, 2022 Macrodyne 1500T Hydraulic Hot Forging Press. Condition Very Good. Weight 100000 kg. Refer to attachments in the documents sections for more information. Unit available immediately. Buyer responsible for removal, contractor must be licensed and insured. MAXIMUM PRESSING FORCE 15,000 KN USABLE BED BOLSTER SIZE (L-R X F-B) 2200 mm X 1200 mm USABLE RAM BOLSTER SIZE (L-R X F-B) 2200 mm X 1200 mm DISTANCE BETWEEN TENSION MEMBERS (L-R) 2400 mm DISTANCE BETWEEN TENSION MEMBERS (F-B X HEIGHT) 750 mm X 1473 mm DAYLIGHT 1400 mm SHUT HEIGHT 600 mm STROKE 800 mm TOP EJECTOR CAPACITY (STATIONS 3 & 4) 750 KN Bjdpfez Hb T Hex Ahmjln TOP EJECTOR STROKE (STATIONS 3 & 4) 90 mm BOTTOM EJECTOR CAPACITY (STATION 3) 750 KN BOTTOM EJECTOR STROKE 200 mm MAXIMUM PUNCH WEDGE CAPACITY (STATION 4) 6000 KN

Condition: ready for operation (used), Year of construction: 2005, Available immediately ex-works: Hydraulic plate shear Baykal Type MGH 3100/10 Year of manufacture 2005 CNC control Delem Dac 310 Cutting length 3060 mm Material thickness 10 mm Controlled back gauge 1000 mm Drive power 22 kW Strokes/min 12 Weight 9600 kg Dimensions 5000/2600/2000 mm Price: Euro 9,500.00 plus VAT ex-works. Bodpfoz Hu Ecsx Ahmsln

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, High speed Flow wrapping machine direct from closed Scotch Egg factory, commonly used for wrapping pies, Scotch Eggs and other bakery products. Rare to find a recent manufactured machine, this is the newest one we have seen. Bedpfozmy Avox Ahmoln

Condition: new, Spare parts category: safety mat for CNC Allen Bradley Lignum 1600x 800 Brand: safety mat for CNC Allen Bradley Lignum 1600x 800 Model: safety mat for CNC Allen Bradley Lignum 1600x 800 Description: safety mat for CNC Allen Bradley Lignum 1600x 800 Allen Bradley Lignum CNC safety mat new, thickness: [value missing] series: 440-F, range: MatGuard, length: 1.5m, width: 1m, thickness: 16mm, Plastisol vinyl, IP67 Allen Bradley protective mat, length 1.5 m, width 1 m - 440F-M2030BYNN The Allen Bradley series MatGuard safety mat from Rockwell Automation is a safety device that detects human presence in hazardous areas. It can be connected to the control circuits of industrial machinery in hazardous environments, creating a protected area of 1.5 m (length) x 1 m (width). When the mat's detection surface senses a person, it sends a signal that shuts down the machine, preventing injury and increasing workplace safety. The durable vinyl material is resistant to bleach, acids, and other industrial chemicals, making it a suitable choice for use in demanding industrial settings. This mat is commonly used to restrict access to hazardous areas in factories. Features and advantages: • Hardened sheet steel construction increases durability. • 4-wire open and short-circuit detection system for enhanced electrical safety. • Can withstand a high static pressure of 4,500 psi (pounds per square inch) for use in heavy-duty applications. Standards and certifications: • CSA (Canadian Standards Association) • ISO13849-1 (International Organization for Standardization) • IEC/EN60204-1 (International Electrotechnical Commission) • TÜV (Technischer Überwachungsverein) Is this mat safe to use in damp or wet areas? IP67 rating CE certified TUV certified CSA certified cULus approved EN1760-1 EN954-1 ISO 13849-1 IEC/EN60204-1 ANSI RIA R15.06 ANSI/B11.19 AS4024.5 The mat is rated IP67 (ingress protection), meaning it is protected against dust and can be water-resistant for up to 30 minutes. This makes it safe for use in humid environments. Technical specifications: Attribute Parameter MatGuard Range 440-F series Protected area 1500 x 1000mm Length 1.5m Width 1m Thickness 16mm Mat material Plastisol vinyl IP rating IP67 Year: Bsdpfx Ahez Eggvemeln 2023

Condition: like new (used), Year of construction: 2020, Year 2020 Cutting length 3200mm Cutting Thickness 4mm Edwards Pearson CNC Control Bjdpfxez Hdw Ue Ahmeln Excellent condition - As new