Used Bmg Labtec Fluostar Omega for sale (324)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Bespoke Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements. #Chassis – Haulage Semi-Trailer - Fine-grain steel welded construction - Fifth wheel plate with replaceable 2" kingpin - Mounting position for warning boards at the rear - Outer frame with "Load-Lock-Profil" for lashing strap attachment - 24 t twin-speed landing legs, single-side operation - Ferry lashing eyes, marked yellow, incl. 2 at the rear as tow eyes - Container locking: 4 pairs of twist locks recessed in the floor for 2 x 20 ft or 1 x 40 ft containers - Stake pockets recessed in the outer frame, 80 x 80 mm internal size Rodpfx Aezb Iu Djb Tscf - Stake pockets recessed centrally in the floor, 80 x 80 mm internal size - Removable stakes W=80/D=80/L=1200 mm, hot-dip galvanised - Lashing rings recessed in the outer frame, 5 t each - 2 tool boxes, W approx. 1230 / H approx. 450 mm, enclosed, fitted across the full width ahead of the axles in place of side underrun protection, foremost lock insertable as pin type - Cross lashing/stake rails recessed in the floor across the full width to the outer frame, approx. 100 mm high, with 20 mm round steel bars top and bottom, spacing approx. 60 mm, closed at the bottom with an angle plate, open downward on one half, for lashing and inserting 80 x 80 mm stakes - Open compartment for warning boards, subject to technical feasibility #Axles + Suspension - SAF disc-brake axles, laser-measured axle/chassis assembly to reduce tyre wear and fuel consumption - Air suspension - 1st axle automatic lift axle, incl. forced lowering and start-off aid, activated by braking 3 times - 2 ride heights, adjustable via hand button: 1 x for coupling height 1120 mm, 1 x for coupling height 1200 mm #Braking System - Two-line air braking system - Colour-coded pipework for easy servicing - Spring-brake parking brake - 2 anti-mismatch coupling heads at the front - EBS electronic braking system with EBS socket at the front - Lift-and-lower valve - Vehicle stability system #Wheels and Tyres - 385/65 R 22.5", steel wheels, factory silver #Electrics - 24 volt - 4 x three-chamber lights, side-mounted yellow LED lighting - 2 white LED front position lights - 2 white/red LED outline marker lights at the rear - 2 x 7-pin and 1 x 15-pin anti-mismatch sockets at the front, without connecting cable - Beacon light with bracket, switched via side lights (lamp removable) - 2 pairs of warning boards, double LED-illuminated, extendable to 4500 mm and removable via plug connector, with additional bracket at the rear - Additional 7-pin socket (to ISO 1724) in the rear underrun protection #Floor - Screen-printed plywood flooring approx. 30 mm thick, cross joints with omega insert, on longitudinal bearers for high point-load capacity, forklift axle load up to 7100 kg max. #Front Wall / Front Corner Posts - 25 mm aluminium hollow profile, 1650 mm high - Corner posts in solid steel design - Front wall additionally fitted internally with 1250 mm high screen-printed plywood panel - "Crash-Blocker": steel impact protection internally at the bottom, approx. 140 mm high - Storage compartment for 80 x 80 mm removable stakes inside the front wall

Condition: used, Year of construction: 2001, Transnorm rising falling Incline belt conveyor GF 6000-600-500 Rcjdpon I Uwfsfx Ab Tjf RA2066 Technical data: Conveyor length (NL): 6000 mm (4200 mm + 1800 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,33 Drive: SEW gear motor, R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2008, Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Rcedpfx Aeq I Ty Rob Tsf Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm conveyor belt GF 4700-600-500 RA2120 Technical data: Conveyor length (NL): 4700 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Rjdpfx Abjppfbvo Tjcf Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 1995-550-400 RA1656 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 1995 mm (leading belt 560mm + ascending belt 1435mm) stand width (NB): 550 mm Belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type HSL-8E Year of manufacture: 2001 Rcsdjk Abd Topfx Ab Tsf incline / decline: adjustable Optionally available: Supports Side guides one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch and forerun belt conveyor GF 7600-700-600 RA2101 Technical data: Conveyor length (NL): 7600 mm (800 mm forerun + 6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DT80N4/BMG/TH Redpfxeq Scqfj Ab Tjcf Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch belt conveyor GF 2200+1300-700-600 RA2189 Technical data: Conveyor length (NL): 3500 mm ( 2200 mm incline + 1300 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Rcjdpfoq H T Sajx Ab Tjf For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch belt conveyor GF 2200+900-700-600 RA2190 Redpfxoq H T Sde Ab Tjcf Technical data: Conveyor length (NL): 3100 mm ( 2200 mm incline + 900 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Rsdpsq Izpnjfx Ab Tjcf Technical data: Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2008, Transnorm conveyor belt GF 3800-700-600 Rjdpfx Aeq I Tzcjb Tjcf RA2207 Technical data: Conveyor length (NL): 3800 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch belt conveyor GF 7200+700-700-600 RA2201 Technical data: Conveyor length (NL): 7900 mm ( 7200 mm incline + 700 mm arch ) frame width (NB): 700 mm, 8000 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Rcsdpfx Aboq Izpke Tef Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Complete meat grinding set The set on offer is a complete meat grinding station built around the NOMA NOWICKI W-130 AL angle grinder, manufactured in 2025. Besides the grinder itself, the set includes a W-130 column bin lift that makes it easy to load raw material directly from bins into the machine’s throat, W-130 tool trolleys, a complete set of sieves/plates, and spare parts, making the offer a ready-to-use, self-contained production station. How does the NOMA NOWICKI W-130 AL grinder with bin lift work? Meat raw material is placed in a tool trolley, which is then raised by the column bin lift and tipped directly into the grinder’s feed hopper, eliminating manual carrying and lifting of heavy raw material. Inside the machine, raw material is moved by a feed screw to the cutting assembly, where knives and sieves/plates (selected according to the desired grind size) reduce it to a uniform structure ready for further processing — meat batters, stuffings, sausages, or burgers. The angle design of the W-130 AL grinder allows for a compact station layout and ergonomic operation, while its solid stainless and acid-resistant steel construction makes it easier to maintain a high hygiene standard. Key advantages of the NOMA NOWICKI W-130 AL set The column bin lift significantly streamlines raw material logistics at the station, reducing operator physical strain and shortening the time needed to load successive batches of meat. The addition of W-130 tool trolleys allows smooth movement of raw material between production stages, and the included set of sieves/plates enables quick changes to the grind size of the processed product without needing to purchase additional tooling. Manufactured in 2025, the set on offer is virtually new, and the included spare parts provide extra assurance of continuous station operation from the very first days of use. Technical specifications of the NOMA NOWICKI W-130 AL set NOMA NOWICKI W-130 AL grinder Manufacturer: NOMA Nowicki Machinery Model: W-130 AL Serial number: 08025235 Year of manufacture: 2025 Powe: 13 kW in 1st gear, 20 kW in 2nd gear Rcjdpfxozxf Afo Ab Tjf Power supply: 3 x 400 V / 50 Hz Grinder dimensions (L x W x H): 1650 x 1550 x 1670 mm Construction material: stainless and acid-resistant steel Compliance: CE, Made in EU Set components W-130 column bin lift – dimensions: 1150 x 1200 x 2850 mm W-130 tool trolleys Complete set of sieves/plates Spare parts Overall set dimensions (L x W x H): 2350 x 1750 x 2850 mm Application of the NOMA NOWICKI W-130 AL set The set is used in meat processing plants, butcheries, slaughterhouses, and facilities producing stuffings, sausages, burgers, and pâtés — wherever, in addition to the grinding itself, efficient logistics of feeding raw material into the machine matter. The column bin lift makes the station well suited to working with large batches of raw material delivered in transport containers.

Condition: like new (used), AIRPOL PR75 Screw compressor Excess pressure [MPa] - execution options: 0.75 / 1.0 / 1.3 Variable performance: Capacity min-max [m3 / h] [1.0 MPa]: 218 - 740... Capacity min-max [m3 / h] [1.0 MPa]: 218 - 740 Capacity min-max [m3 / h] [1.3 MPa]: 212 - 565 Compressed air connection: G 2 Ambient temperature [° C]: +5 ÷ +40 Cooling air demand [m³ / h]: 11700 Temperature of compressed air [° C]: about 10 above ambient temperature Sound level [db (A)]: 75 Transmission mode: direct drive Rsdpfx Absd S Udco Tecf Rated engine power [kW]: 75 Rated fan motor power [kW]: 4 Degree of motor protection: IP55 Supply voltage [V]: 400 Recommended cross section of the power cord [mm2]: 3x70 + PE Protection [A]: 160 Manufacturer: Airpol Model: PR75 Height: 2200 mm Width: 1500 mm Length: 1675 mm Weight: 1900 kg Total power: 75 kW

Year of construction: 2009, condition: good (used), The Grunwald-HITTPAC AKH-059 is a 3-lane filling and closing machine. A rotary cup filling machine is a type of packaging equipment designed to efficiently fill and seal cups with various products, such as yoghurt, pate, kefir, cream cheese and other similar viscous or semi-liquid substances. These machines are commonly used in the food and dairy industry. The machine operates on a rotary system, which allows multiple cups to be filled and sealed simultaneously. The cups move through different stations, each dedicated to specific tasks like cup dispensing, filling, sealing, and capping. Installed cup dimension: 110 x 80mm (150g) Motor and vacuum pumps are protected and installed in the machine frame, underneath the table top. Rsdpfx Aem Ux Tisb Tscf Dimensions: L: 2300 x W: 1800 x H: 2200mm Weight: 1500kg Power: 9kW Efficiency: approx. 2750 – 3750 cups/h (depends on the product consistency)

Condition: good (used), Year of construction: 2010, The Poly-Clip FCA 160 double clipper is a professional machine for closing artificial and natural casings in the meat and food industry. Manufactured by the renowned manufacturer Poly-Clip System GmbH & Co. KG, it is characterized by reliability, solid construction, and high performance. The machine is designed for continuous operation in production facilities, ensuring fast and precise closure of calibers while maintaining the highest standards of hygiene. Technical specifications: Manufacturer: Poly-Clip System GmbH & Co. KG Model: FCA 160 Power: 4.0 kW Rcedpfxjw Swqio Ab Tef Power supply: 3x400V, 50/60Hz Current consumption: 6.0A Operating pressure: 5–7 bar Weight: 625 kg Machine dimensions: 150 × 120 × 190 cm Clip counter: 46841 Manufactured in: Germany Additional equipment: Work table Set of spare parts Advantages of the Poly-Clip FCA 160 clipping machine: Solid and reliable design. Precise and fast closing of casings. Easy to use and highly ergonomic. Suitable for intensive use in industrial conditions. The set includes additional equipment for immediate implementation in production. The Poly-Clip FCA 160 clipping machine is a proven solution for meat and food processing plants where quality, efficiency, and durability are important.

Condition: reconditioned (used), The Risco RS4001 Vacuum Filler is a highly efficient and versatile machine designed for use in the food processing industry, particularly for filling and portioning sausages, hamburgers, meatballs, pâtés, and other similar products. The RS4001 features a powerful vacuum system that ensures consistent product filling with minimal air inclusion, which is essential for maintaining product quality, especially in sausages and similar products, it is also equipped with advanced portioning technology that allows for precise control over portion sizes. Technical informations: Hopper capacity: 260l Power: 6.3kW Portioning range: 5-10.000 grams Rcsdpfx Aoubvkwsb Tof Efficiency: up to 380 portions/min / 6.500 kg/h Dimensions: L: 1950 x W: 1200 x H: 1950mm Weight: 900kg Machine after complete renovation

Condition: used, empty load weight: 7,020 kg, maximum load weight: 35,980 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 03/2023, loading space length: 13,510 mm, suspension: air, tire size: 445/45 R19,5, color: other, gearing type: other, front tire size: 445/45 R19,5, rear tire size: 445/45 R19,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Container closures, extendable, for 2 x 20 ft containers or 1 x 40 ft container, 4 x warning signs with lighting, omega floor with hardwood planks, aluminum rims, Alcoa Dura-Bright finish, front wall approx. 1,800 mm, pallet box for 24 Euro pallets, bracket for securing bars, 16 x bar pockets, 12 x securing bars, approx. 2 m long, new price was €49,000, -- subject to printing errors, mistakes and changes, sample images --, more information available at: !, More Details: ! Rsdpfezvyhqex Ab Tocf

Condition: excellent (used), Year of construction: 2020, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: 1172799, spindle speed (min.): 15,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Haas UMC-750 5 Axis Vertical Machining Centre with Haas CNC Control, 630mm x 500mm Table, Travels X Axis 762mm, Y Axis 508mm, Z Axis 508mm, Through spindle coolant, C Axis 360deg Rotation, B Axis -35deg to + 100deg, Redex Uznfepfx Ab Tjcf High speed machining enabled Spindle Speed 12,000rpm, 40 Tool ATC 2020 machine , BT40 Spindle Taper, Swarf Conveyor, Coolant System. S/No. 1172799 Wireless probing.

Condition: used, mileage: 532,000 km, power: 330 kW (448.67 HP), fuel type: diesel, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 9,600 mm, total width: 2,550 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electric window regulation, parking heater, power mirror, Year of manufacture: 2021 Front axle: Steering; Tyre profile left: 100%; Tyre profile right: 100% Rear axle 1: Double wheels; Tyre profile left inner: 100%; Tyre profile left outer: 100%; Tyre profile right outer: 100%; Tyre profile right outer: 100% Rear axle 2: Lift axle; Tyre profile left: 100%; Tyre profile right: 100% Number of cylinders: 6 Engine capacity: 10.837 cc Empty weight: 9.625 kg Carrying capacity: 16.075 kg GVW: 25.700 kg = Additional options and accessories = - Air horn - Air suspension Rcedpfezuawcox Ab Tef - Aluminium fuel tank - Flashing lights - Work lights - Hardwood omega floor - Heavy duty engine brake - Line assist - Lock diff - Outside temperature display - Parking air conditioning / roof air conditioning - Radio - Refrigerator - Sleeper cab - Toolbox stainless steel 2x - Vehicle heater - Visor = Remarks = Inside demension LxB 815 x250 cm

Condition: used, Year of construction: 1999, A complete screw manufacturing factory with 8 production lines is available for sale. The facility is designed for the industrial production of wood screws, metric screws, and inch screws. The factory includes all necessary machinery covering the entire production process – from wire processing and cold forming to thread rolling and finishing operations. A large inventory of spare parts is also included to ensure long-term operation and maintenance of the production lines. Machinery Overview Thread Rolling Machines 1 × Charng Guey CGR510 4 × Hilgeland thread rolling machines (Year 1987–1992) 1 × Hilgeland (Year 1959) 2 × EWM (Year 1986 / 1989) 1 × Malmedi thread rolling machine 1 × Hilgeland Ronsdorf Pointing Machines 6 × ME10 2 × ME12 Cold Heading Machines / Presses 3 × Sacma 31 (Year 1984 / 1985 / 1986) 1 × Sacma 21 (Year 1984) 2 × Klose MTH 250 1 × Omega 122EM 1 × 5-stage press Jern Yao JBF-17B5SL Deburring Machines 2 × AAG12 Rcedpeztfvujfx Ab Tof 4 × AAG10 Centrifuges 10 × units Key Advantages Complete screw production facility Production of wood screws, metric screws and inch screws 8 production lines Large spare parts inventory included Ready for industrial mass production Further technical details and inspection available upon request.

Condition: used, maximum load weight: 35,480 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment: Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, neck height at the front approx. 130 mm. Coupling device: 2-inch kingpin. Underrun protection: bolted design, according to EC. Side underrun protection: according to EC, made of aluminum profiles, anodized. Saddle supports: 2 x 12 t saddle supports with leveling foot and single-sided operation on the right-hand side. Axles: 3 x 9 t air suspension axle unit, disc brakes 22.5". Total stroke approx. 180 mm, raising and lowering device via rotary slide valve. Braking system: Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit. Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice. Tire pressure monitoring system (TPMS) via CAN bus system of the EBS. Fenders: according to EC. Spare wheel holder: none. Load securing: - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t - In the outer frame, holes for attaching lashing straps are provided every approx. 400-600 mm. Front wall: Reinforced steel construction, fixed, approx. 1,400 mm high. Internally lined with approx. 9 mm screen-printed material (approx. 1,250 mm high). Floor: approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles. Lighting system: according to EC, 24 Volt, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. Lane departure warning lights LED. 1x15- and 2x7-pole plug connections on the front crossmember. Equipment: - 2 wheel chocks with holder - Warning signs ECE 70 - Holder for rotating beacon, incl. rotating beacon - 2 rubber impact buffers at the rear - Access ladder at the rear right, foldable and extendable (without platform) - 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles. Painting: Front wall: RAL 3002 carmine red. Chassis: hot-dip galvanized. Outer frame: hot-dip galvanized + RAL 3002 carmine red. Center beams: RAL 3002 carmine red. SSV: Aluminum, anodized. Underrun protection: white (RAL 9016 traffic white). Components: galvanized/KTL black. Rims: silver. Outline marking: complete, yellow. Incl. special accessories. First axle liftable, with fully automatic, load-dependent lift control. 10 pairs of stake pockets in the outer frame, evenly distributed. 4 rows of stake pockets transverse to the loading area. 20 stakes made of galvanized tube 80/50, total length approx. 1,200 mm. Inside the front wall, a magazine for 20 stakes. 5 x 25-mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stakes. Side board and stake magazine: under the chassis, left and right, sliding rails for side boards and stakes. Container locks for 1 x 40' and 2 x 20' containers, rear-flush. Container locks for 1 x 20' container in the center. Work lights on the lamp carrier (switched via reverse gear). 2 Rodpjzrq U Hsfx Ab Tscf

Year of construction: 2010, condition: used, The Colussi Ermes L0130/017 Type 2414 is a machine from the Colussi Ermes brand, designed for automatic washing of bins and transport containers used in the food industry. How does the Colussi Ermes L0130/017 bin and vat washer work? The washer uses high-pressure washing technology, combining the mechanical action of pressurized water jets with chemical agents, allowing effective removal of even stubborn residues from the surface of bins and containers. The machine is designed to wash containers of various shapes, heights, and dimensions, including square, round, plastic, steel, and wheeled containers. Rsdpfx Abozudbxj Tocf The stainless steel construction with thick, insulated panels limits heat loss, while an advanced water extraction system allows the equipment to be reused almost immediately after a washing cycle is completed. Key advantages of the Colussi Ermes L0130/017 The Colussi Ermes L0130/017 can wash between 20 and 120 containers per hour, depending on the program used and the type of bins being washed, making it a flexible solution for plants of varying production scale. The ability to program individual washing cycles tailored to customer needs, along with responsible chemical dosing, reduces media consumption and environmental impact. Continuous monitoring of the washing process in line with HACCP standards, along with a mechanical lift system that eases service access, increase the safety and convenience of operating the machine. Its robust stainless steel construction and energy-efficient washing programs with multi-stage water heating ensure reliable operation under intensive use. Technical specifications of the Colussi Ermes L0130/017 Manufacturer: Colussi Ermes Model: L0130/017 Type: 2414 Year of manufacture: 2010 Capacity: 20 – 120 containers/h Construction material: stainless steel, with insulated panels Compliance: process monitoring in line with HACCP standards Application of the Colussi Ermes L0130/017 bin and vat washer The Colussi Ermes L0130/017 is used in food industry plants, wherever regular and effective washing of bins and transport containers used for carrying and storing raw material is required. The machine performs well both in smaller facilities and in higher-throughput production lines.

Condition: used, empty load weight: 12,200 kg, maximum load weight: 26,800 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 09/2024, suspension: air, tire size: 235/75 17,5, tire condition: 80 %, color: black, Year of construction: 2024, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 413701 Fliegl, SDS 480 * Year of construction: 2024 * ABS, Anti-lock Braking System * Air suspension * Tarp, neutral * Tarp, used * Edscha / sliding roof * Retractable lashing eyes * Mechanical liftable roof * Trailing axle * Air coupling (red + yellow) * Connector plug, 2x7-pin * Connector plug, 15-pin * Lifting and lowering device * Storage box / tool box * Rear support * Hydraulic ramp * Suspension: Air * Total weight: 39,000 kg * Tare weight: 12,200 kg * Payload: 26,800 kg * Permissible total weight: 39,000 kg Rcedpfx Aozhfvdjb Tef * Axle manufacturer: SAF * Tire condition, 1st axle: 80% - 80% - Tire size: 235/75 R17.5 * Tire condition, 2nd axle: 80% - 80% - Tire size: 235/75 R17.5 * Tire condition, 3rd axle: 80% - 80% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Hydraulic 26-ton loading ramp * Remote control for loading ramp * Trailing steering axle * Saddle height 1250 mm * Internal height, low bed: 3050 mm * Loading height, low bed: 920 mm * Rear beam extension, each 400 mm * Fifth wheel with interchangeable kingpin * 30mm Omega floor * 24-ton support * Axle load recognition in the truck * Tire pressure monitoring * Extendable warning signs * 10-year warranty against rust * On request, we will gladly send you a video * Further pictures and a construction description Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive service includes: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transfer of commercial vehicles Please ask our trained specialists, we will be happy to advise you.

Condition: excellent (used), The REX Düker Hydro 65 is a bowl cutter from REX Düker, a recognized manufacturer of machinery for the meat industry. The machine is designed for chopping and cutting meat raw material for the production of sausages, cold cuts, and other products requiring precisely prepared meat batter. Rcsdpfx Abeztxx No Tef How does the REX Düker Hydro 65 bowl cutter work? The Hydro 65 is equipped with a 65-liter bowl and a 6-knife cutting head, driven by a 20 kW main motor. Thanks to the hydrostatic transmission, blade shaft speed is infinitely variable up to 4500 rpm, allowing the intensity of cutting to be precisely matched to the type of raw material being processed. The bowl rotates at up to 500 rpm in both directions, and the machine offers 3 separately switchable bowl speeds. Operation is controlled via an SL23 membrane keypad with contactor control and motor protection, while smooth speed regulation is available through a potentiometer. A digital display shows blade shaft speed, bowl revolutions, and temperature in real time, and safety switches for the bowl and temperature ensure safe operation. Key advantages of the REX Düker Hydro 65 The REX Düker Hydro 65 stands out with infinitely variable blade speed thanks to its hydrostatic drive, allowing the cutting process to be precisely matched to different recipes and types of meat raw material. Three independently switchable bowl speeds, together with bidirectional bowl rotation, further increase the machine’s operational flexibility. A robust stainless steel construction, a control panel with a digital display of operating parameters, and a noise protection cover combine high functionality with comfortable, safe operation — an important factor for daily, intensive work in a meat processing plant. Technical specifications of the REX Düker Hydro 65 Manufacturer: REX Düker Machine type: Hydro 65 Bowl capacity: 65 l Cutting head: 6 knives Main motor power: 20 kW Blade shaft speed: infinitely variable up to 4500 rpm (hydrostatic transmission) Bowl speed: up to 500 rpm, bidirectional, 3 speeds Power supply: 400 V, 50 Hz Protection: 63 A slow-blow fuse Controls: SL23 membrane keypad, digital display Application of the REX Düker Hydro 65 bowl cutter The REX Düker Hydro 65 is used in meat and sausage processing plants, wherever precise chopping and mixing of meat raw material is required for the production of fillings, sausages, cold cuts, and other products with a uniform consistency. Infinitely variable blade and bowl speed make the machine well suited both to recipes requiring gentle cutting and to intensive chopping of raw material.

Condition: excellent (used), functionality: fully functional, The RÜHLE SR2 Turbo is a dicing machine from the German brand RÜHLE, designed for cutting fresh, cooked, or slightly frozen meat, sausages, hams, cooked vegetables, fish, and suitable types of cheese into cubes, strips, or slices. The machine is built entirely from stainless steel, with smooth surfaces and gently rounded edges. How does the RÜHLE SR2 Turbo dicer work? The product is placed into a large working chamber measuring 120 x 120 x 500 mm, eliminating the need for pre-cutting the raw material and allowing whole pieces — such as an entire pork neck or well-stuffed products — to be loaded directly. Gentle mechanical feed ensures even delivery of the product to the blades, even for hot, freshly cooked batches, and the cut product is carried by a discharge belt into a standard 200-liter meat container, 750 mm in height. The machine is designed to work with raw material across a wide temperature range – from -3°C to +80°C – allowing it to cut both slightly frozen products and hot products fresh from cooking. Key advantages of the RÜHLE SR2 Turbo The RÜHLE SR2 Turbo delivers smooth cut surfaces, giving the finished product an attractive appearance. The large working chamber eliminates the need for pre-cutting the raw material, shortening production preparation time and reducing the number of steps on the line. Gentle mechanical feed allows precise cutting even of delicate or hot products, without tearing or deforming them, while the all-stainless-steel construction with smooth surfaces and rounded edges meets the strict hygiene requirements for machinery used in the food industry. The discharge belt, which carries the cut product directly into a standard meat container, further streamlines workflow at the workstation. Technical specifications of the RÜHLE SR2 Turbo Manufacturer: RÜHLE Model: SR2 Turbo Maximum capacity: approx. 2500 kg/h Raw material processing temperature: -3°C to +80°C Loading chamber dimensions: 120 x 120 x 500 mm Available blades: 6 mm, 10 mm, 23 mm Construction material: stainless steel Discharge container: standard 200 l meat container, 750 mm height Machine dimensions (L x W x H): 1550 x 1400 x 1660 mm Application of the RÜHLE SR2 Turbo dicer Rcjdpfsztxbqex Ab Tef The RÜHLE SR2 Turbo is used in meat and fish processing plants, as well as in the production of vegetable products and cheese, wherever precise cutting of raw material into cubes, strips, or slices is required. The wide processing temperature range makes the machine well suited to both slightly frozen and hot, freshly cooked products.