Used Bonetti Vbs 400E for sale (147)

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26027.30 Serial Number blocking unit: 147 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) Giodpfx Ajhrmk Rehvou With slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26027.40 Serial number empty pallet dispenser (pallet terminal): 132 Includes pallet conveying, reference-no: 26027.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: good (used), Layer palletizer for stable (strapped) bundles. Bundle size : min 140-200mm, max 300-430mm From one infeed line onto one pallet. Infeed with blocking unit VB-95 and optionally walkway conveyor and flow turn to the left. Row building with bundle turning, transfer of rows and building of a complete layer. Palletizing of the layer onto pallet. Pallet conveying for EURO-pallets (800x1200mm) with empty pallet dispenser PT-80, palletizing position and pick-up for full pallets. Speed of up to 1500 bundles/h (stable bundles required!). Weight (palletizer + pallet conveying): ~ 3000 kg Gjdpfog Hfbpsx Ahvsiu Power: 380-420 V, 3~, N, PE, 50 Hz Air: 0,35 Nm3/Min 6 bar

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. Infeed with blocking unit & turning device. The palletizer builds single rows of bundles which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26001X.30 Serial Number blocking unit: 152 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Gjdpfxshrigqs Ahvjiu Right hand palletizer (palletizing to the right of the infeed) With Slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26001X.40 Includes pallet conveying, reference-no: 26001X.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying mounted on floor Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Color: Blue Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26180X.30 Gisdpfjhrmlgsx Ahveu Serial Number blocking unit: 136 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT 80 Reference-# empty pallet dispenser (pallet terminal): 26180X.40 Serial number empty pallet dispenser (pallet terminal): 78 Includes pallet conveying, reference-no: 26180X.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary Gjdeyt Iawspfx Ahvjiu with magnet + 2 pairs of new shafts Machine is without gearbox.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 3,210 mm, compressed air connection: 6 bar, cutting length (max.): 6,000 mm, Combi cutting table for cutting monolithic and laminated (VSG) glass. The entire line consists of an automatic crane, tilt table, a table for removing low-e film for both monolithic and VSG glass as well as for cutting monolithic glass, module VB-45 used for cutting VSG glass, and a table for breaking off monolithic glass as well as for removing finished pieces. For sale without crane and tilt table. Godpfx Ahox Tq S Djvoiu

Condition: like new (used), functionality: fully functional, overall weight: 2 kg, total width: 400 mm, total height: 420 mm, total length: 600 mm, For sale: plastic crate, tray, box. Gisdpfxouvdbus Ahveu Available in large and smaller sizes, with opening (window), stackable and suitable for use as a shelf. They can also be used in open storage and are ideal for sorting small parts. Plexiglass insert is available for large crates, price per piece: €0.30. Smaller versions without an opening (window) are also available. - Large crates with window, size 60x40x42 cm, AUER: Price: €5.50 for 24 pcs. Above quantities: 49 pcs – €5.00 each 80 pcs – €4.80 each 150 pcs – €4.50 each 250 pcs – €4.00 each 400 pcs – €3.50 each Smaller versions with window 40x30x22 cm and without window 40x30x27 cm: Price: €4.00 up to 39 pcs 40 pcs – €3.80 each 100 pcs – €3.50 each 200 pcs – €2.90 each Models: Container, KTL, BOX, EG6442, EB6442, EB4327, SLK 43/22, SLK 64/42, EG 43/27 VB, 965765, 965635. Euro crates with window: STT965635, STT965765, EURO 4028.

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical Data for EBERT TLS 43 ATV Special Low Loader: Permissible kingpin load: 19,000 kg Permissible axle load: 24,000 kg Gross vehicle weight: 43,000 kg Unladen weight (DIN approx.): 12,500 kg Low bed length i.L.: approx. 6,650 mm + 4,000 mm Axle table length: 2,700 mm Overall width: 2,550 mm Loading edge/low bed: approx. 200 mm - 350 mm Sliding table length: 500 mm Low bed width extension: up to 3,050 mm Low bed telescopically extendable by: 4,000 mm B-dimension: 12,000 mm Entire vehicle flame-sprayed galvanized, with epoxy primer and 2K finish Oversize signage front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS independent wheel suspension, hydraulically steered and suspended Front raised bed: - Doors in corners left and right, accessible from outside - Tool box with lid behind the front wall, height 600mm, width 2,480 mm, depth 7,500 mm - Spare wheel on the raised bed, behind the partition on the right - Steps on the right side for access from the low bed to the front raised bed - Hydraulic coupling for uncoupling on the left, 6-way Multi-Faster coupling - 6 lashing points (3,000 kg, outer raised bed/fall arrest rings) - 2 lashing points (5,000 kg, on top of the longitudinal beams, towards the rear) Giedpfx Aoyfvwbohvou Low bed: - Climbing aids at boom – extendable - Low bed telescopically extendable by 4,000 mm, lockable every 500 mm - With sliding table, lockable every 250 mm - 28 lashing points (10,000 kg, outer frame) - 24 stake pockets 90x90 mm, evenly distributed for low bed width extension up to 3,050 mm - 50 mm hardwood planks placed between extension tubes, 10 mm protrusion Rear raised bed: - Front of raised bed sloped and perforated, prepared for retrofitting ramps (galvanized using adapters) - Rear: ramp mounting profiles (Altec) – C-rails - 6 lashing points (10,000 kg, outer raised bed) - 6 lashing points (5,000 kg, in excavator recess) - 8 lashing points (5,000 kg, for oversize on outer frame) - Excavator recess closed at front and rear with removable wooden floor board Electrics: - NATO spiral cable connection, power supplied by towing vehicle - Rotating beacon centrally on the rear - Side marker lights in LED version - Standard vertical taillight (LC5) - Work lights on raised bed for illuminating low bed - Uncoupling: sensor for safety and pressure switch for suspension Air: - Aluminum air reservoirs 60 l (2x10 l, 2x20 l) - TEBS modulator - Extension locking left and right (valve at rear, side of raised bed) - Double-release valve Hydraulics: - Hydraulic system on raised bed for steering, suspension and detachable gooseneck Accessories: - 2 x 4 hardwood planks for widening low bed and center table - 2 wheel chocks for uncoupling - 4 support wedges On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (tel.) will be happy to assist you. For more information, please visit our homepage. Subject to errors and prior sale! New roadworthiness certificate (HU), rental available GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical Data for EBERT TLS 43 ATV Special Low Loader: Permissible king pin load: 19,000 kg Permissible axle load: 36,000 kg Gross vehicle weight: 55,000 kg Unladen weight (per DIN): approx. 15,500 kg Lower deck length i.L.: approx. 6,650 mm + 4,000 mm Axle table length: 3,550 mm External width: 2,550 mm Loading edge/lower deck: approx. 200 mm – 350 mm Sliding table length: 500 mm Lower deck widening to: 3,050 mm Lower deck extendable by: 4,000 mm B-dimension: 13,300 mm Entire vehicle flame-sprayed galvanized, with epoxy primer and 2K paint finish Oversize warning signs front and rear, with red/white panels Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single wheel suspension, hydraulic steering and hydraulic suspension Front high-bed: Side panels 600 mm high Corners at front of high-bed angled Exterior-access doors in front corners (left and right) Lockable storage box with lid behind the front wall; height 600 mm, width 2,480 mm, depth 7,500 mm Spare wheel on high-bed, right side behind partition wall Staircase on right side for access from lower deck to front high-bed Hydraulic coupling for uncoupling on left side (6-way multi-faster coupling) 6 external lashing points, 3,000 kg each (fold-down lashing eyes) on high-bed 2 lashing points, 5,000 kg each, on upper longitudinal beams (to the rear) Lower deck: Climbing aids at the boom – pull-out Outer frame thickness 8 mm Lower deck extendable by 4,000 mm, lockable every 500 mm With sliding table, lockable every 250 mm 28 external lashing points, 10,000 kg each, on the outer frame 24 plug-in sockets 90 x 90, evenly distributed for lower deck widening to 3,050 mm Between extension beams, 50 mm hardwood planks are placed, protruding by 10 mm Rear high-bed: Front of rear high-bed sloped and perforated to allow retrofitting of ramp mount profiles (galvanized adapters) Giedpfx Ahoyfu N Aevsu At rear: ramp mount profiles (Altec) – C rails 8 external lashing points, 10,000 kg each, on rear high-bed 6 lashing points, 5,000 kg each, in the excavator recess 10 lashing points, 5,000 kg each, for oversize loads on the outer frame Excavator recess can be closed at front and rear with insertable wooden floor plates Electrics: Use NATO spiral cable; power supplied by tractor unit Roof beacon centered at rear LED side marker lights Standard vertically mounted taillight (LC5) Work lamp on the high-bed to illuminate the lower deck Oversize warning signs front and rear, with controls for uncoupling, safety sensor, and suspension pressure switch Air: Aluminum air reservoir 80 l TEBS modulator Slide-out lock left and right (valve located at rear high-bed sides) Double release valve Hydraulics: Hydraulic system on high-bed for steering, suspension, and detachable gooseneck Accessories: 2 x 4 pieces hardwood planks for lower deck widening and intermediate table 2 wheel chocks for uncoupling 4 wheel chocks On request, we can provide a leasing or financing offer. Mr. Ebert (phone...) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 15,000 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: gas, fork length: 1,200 mm, fork width: 80 mm, total height: 2,800 mm, Equipment: pallet forks, VB = Counteroffer for the price is welcome Gijdpfjyf D Twjx Ahvju

Condition: excellent (used), -Bearing type: Spherical roller bearing -Type: 23224. VB 33. MB -Brass cage -Grease groove -Borway diameter: 120 mm -Outer diameter Ø: 215 mm Godpfx Aob A Rzzohvjiu -Width: 76 mm -Weight: 12.5 kg

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: ttw, belt conveyor with base frame, height adjustable and tiltable -Type: VB -Speed: 3,65 m/min -Belt width: 400 mm -Conveyor length: 1555 mm Gjdpfx Ahov T Uttevsiu -Drive: 0.18 kW, see photo nameplate -Transport dimensions: 1585/610/H1065 mm -Weight: 62 kg

Condition: good (used), WE OFFER - approx. 1,800 m used drive chain from Dürkopp. Can be used in various conveying elements for trolleys such as Power and Free or longer, space-saving conveyor lines for trolley sorting; we-sorting. Giodpoigq D Uofx Ahvsu Price: VB Length: approx. 1.800 m Condition: used Availability: in stock PROJECT Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We will gladly assist you with the transport and assembly of the goods. TERMS OF PAYMENT Terms of payment are to be agreed upon in case of order. The price is the unit price/net price or as stated in the description text (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn deals with new and used products in the fields of warehouse logistics, conveyor technology, warehouse platforms, textile storage as well as machines for trade, industry and craft. We constantly offer you interesting second-hand offers from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2009, Perfect Binding Line, consisting of: Gathering Machine ZU 841.A - basic frame with 21 gathering stations - 19 standard feeders - 1 handfeeding station (covering 2 housing stations) - device for electrostatic fixation of three advertising medias - integrated jogging station - Aircenter - reject unit AS 841 to the right - transfer channel as connecting unit to the binder Perfectbinder KM 473 - 26 clamps - handfeeding - main milling station - equalized milling station - notching station - micro-notching station - brushing station with roller brush - 2 Hotmelt spine gluing units - 1 Hotmelt side gluing unit - 3 premelters LH 375 - IR heating at curve - stream cover feeder SAL 411.A - scoring station for 4 scores - 2 pressing stations - gripper carriage delivery - laydown device Transport and Drying Line, incl. Ambaflex drying tower, incl. emergency delivery Three Knife Trimmer HD 153.P - copilot - right hand infeed - counter stacker - silicon spraying device - standard cutting cassettes 7 - 18 Gjdpfjvg Ad Tex Ahveiu additionally available: Kolbus book block feeder with delivery belt Kolbus card gluer KK 841 PUR spine gluing unit with Nordson smelting unit Best for PUR cover 600L Kolbus destacker AE 360 Kolbus blocking unit VB 120 pallettizer Kolbus PL 770 or Kolbus PL 771

Condition: good (used), Offered from insolvency, 1 pcs of stabilisation Manufacturer AMF Model 6497/26 Weight about 6kg per pcs. 4x available Price per Stk.170Eur VB Geded Nv Tpspfx Ahveiu

Condition: used, TECHNICAL DETAILS - Posts number : 16 - Indexing time : 0,7 [s] - Max. bar diameter : 32 [mm] - Clamping type : collet VB 32 - Max. part length : 150 [mm] - Max. number of horizontal units : 16 - Max. number of vertical units : 24 - Max. number of all units : 24 - Electrical supply : 400 [V] - Installed power : 40 [kW] - Dimensions : 9,8 x 4 x 2,9 [m] - Weight : 6 500 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT - 2 turning units CNC 2 axes - Band part conveyor - Chip conveyor - Lubricating tank - Filtration Giedouhbwispfx Ahvsu

Year of construction: 2025, condition: used, Packaging machines, consisting of: Gjdpfswk Dv Dox Ahvsiu 1x Rotary arm wrapper with top sheet applicator, type: B200E, manufacturer: TechnoWrapp 1x Ring wrapper, type: A800-4, manufacturer: TechnoWrapp 1x Rotary arm wrapper, type: CW 400E, manufacturer: CombiPack 1x Baler, type: BVP-950-HL1, manufacturer: Willems, Indion Technical details, equipment, photos, and operating time are shown in the attached description.

Condition: used, overall weight: 6,545 kg, color: orange, operation weight: 6,545 kg, maximum load weight: 3 kg, empty load weight: 3,045 kg, tire size: 225/75R17.5, Year of construction: 2012, total length: 442 mm, tire condition: 60 %, front tire size: 225/75R17.5 | 60%, rear tire size: 225/75R17.5 | 60%, maximum speed: 50 km/h, working width: 165 mm, Equipment: air conditioning, lighting, Tyres (front): 225/75R17.5, Tyres (rear): 225/75R17.5, First registration: 2012, Tow hitch - automatic, Tow hitch - manual._____We are offering for sale a used Ausa compact vehicle transporter M 350 H 4x4 Full Grip, equipped with a 2.0 TDI VW CommonRail engine, Euro 5 with EEV, 74 kW / 102 HP - Long three-way tipper - with quick-change frame - equipment carrier plate - air conditioning - pin & ball coupling - ABS - AUSA FullGrip system. Front attachment plate: 1,800 kg lifting capacity, joystick control for lift-lower, right-left, additional switch for float position and hydraulic circuit. Brakes: front hydraulic servo brake with front disc brakes; rear drum brake with ABS and EBD. Tyres: 225/75R17.5. Unladen weight: 3,045 kg, Payload: approx. 3,500 kg, Perm. GVW: approx. 6,545 kg, Towing capacity braked: 3,500 kg, Towing capacity unbraked: 750 kg. Length: 4,427 mm, Width: 1,750 mm, Outer edge of fender Height: 2,230 mm without beacon, 2,390 mm with beacon. Wheelbase: 2,160 mm, Turning circle (outer): 7,998 mm. 4x4 drive. Tipper bed internal dimensions (LxWxH): 2,540 x 1,650 x 400 mm. Comparable to Bonetti, Multicar, Pfau. You can find our complete range of used vehicles online. Further details available upon request. Subject to prior sale! Location: 94491 Hengersberg. Godpfxsyq Au Rs Ahvsiu

Condition: new, Shredding Shafts for Hammel VB 950, Arjes VZ 950, Lindner U95, Pronar MRW 2.10.10, Olnova 95DK Available in all configurations with side combs and breaker bars: - 6-8-8 - 8-8-8 - 6-10-10 - 8-10-10 - 10-10-10 - 12-10-10 PROTECHNIKA is a company with a 21-year history, specializing since its inception in the production of spare parts and complete recycling lines. In recent years, we have expanded our product range to include the manufacture of cutting shafts for slow-speed shredders. By implementing automated welding processes and our proprietary production technology, we have minimized production times while ensuring consistently high quality. Cutting shafts are a serial product, which allows us to collaborate with machine manufacturers as an OEM supplier. What sets PROTECHNIKA apart from the competition? It’s simple! - Certified 3.1 materials - TUV SUD Rheinland certified quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - Welders certified to ISO 9606-1 Giodpfxjx Hhq Re Ahvou - ISO 9001:2015 - ISO 14001 - In-house design department able to meet all customer requirements - Our own Research and Development Center Customer relations are of paramount importance to us, as their satisfaction is our greatest success!

Condition: new, SHAFTS DEDICATED FOR HAMMEL VB 850. ALSO AVAILABLE WITH SIDE COMBS PROTECHNIKA is a company with 21 years of history and, since the start of its operations, has been engaged in the production of spare parts and complete recycling lines. In recent years, we have expanded our portfolio to include the production of grinding shafts for slow-speed shredders. By implementing automated welding processes and developing our own manufacturing technology, we have minimized production times while maintaining consistent, high quality. Grinding shafts are a series-produced product, which, among other advantages, enables us to cooperate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality - ISO 9001 Giedpfjx Hhfzjx Ahvju - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 welder qualifications - ISO 9001:2015 - ISO 14001 - Independent design department capable of fulfilling any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTRE Customer relations are of paramount importance to us, because their satisfaction is our success!

Year of construction: 2010, condition: good (used), A 20 2 type P(t) [kW] 20C°: 6.0 0,55kW Hollow output shaft and keyway Helical bevel gear units Gear ratio 29.2 Mounting position VB Godsh I D I Dopfx Ahvsiu

Year of construction: 2010, condition: used, 0,75kW Giedpfeh I D Ntex Ahvju Hollow output shaft and keyway Helical bevel gear units Gear ratio 43.2 Mounting position: VB