Used Bowl Cutter With Loader 2016 for sale (9,254)

Condition: used, Year of construction: 2016, Makino A51NX in very good condition, including a new ATC tool changer and Cubes. Approx. 11,000 hours of cutting time. Capacity & Travels: Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Njdpfxezg N E Hj Aa Iolc Max. Workpiece: ∅ 630 mm × 900 mm Max. Payload Capacity: 400 kg Spindle: Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Motion & Feed Rates: Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cutting Feedrate: 50,000 mm/min Axis Acceleration: 1G B-Axis Indexing: Full 4th axis, Direct Drive (0.001-degree increments) Tooling: ATC (Automatic Tool Changer) Capacity: 60 tools Tool-to-Tool Time: 0.9 seconds Max. Tool Diameter / Weight: 170 mm / 12 kg 04003 HSK-A63 Spindle – Replaces the standard ISO50 interface. Features a double taper, full face contact, and hollow shank interface. Tool clamping force is higher than 44kN; HSK tool holders are required. 14017 HSK holders for 60 Tool ATC 26001 Moire Scale Feedback X, Y, Z-Axis Increments 0.05µm, positioning tolerance Tp = 0.006mm (ISO 230-2). 29006 Through Spindle Coolant 3.0MPa – Provides TSC flow of 30 l/min at 3.0MPa, replacing the standard 1.5MPa. Air through the spindle is possible. The pressure data refers to the output flange of the pump. 29009 Flow Switch for Through Spindle Coolant – Monitors through-spindle coolant flow. The machine will feed hold if the flow is below a preset level. Note: Recommended option for filtration systems to prevent tool damage. 31002 Air curtain for splash guard window – Located in the middle of the operator-side window, this air curtain prevents chips and coolant from obstructing the view. 37000 Broken tool sensor outside machining area (BTS) – Tool breakage detection for centric tools (tool diameter 1-40mm, tool length 65 - 430mm). Length measurement is performed using a movable probe. The measurement takes place in the ready position for a tool change, outside the machining area. Accuracy ± 2mm. If there is a difference between the measurement before and after machining, an alarm is triggered automatically. 37101L Automatic Workpiece Measuring Device (RENISHAW OMP60) – Three-coordinate measuring probe from RENISHAW with automatic coordinate correction. The signal is transmitted via infrared. Tolerance approx. 0.005mm. 14 automatic measurement cycles are available as pre-programmed cycles in the program memory. Note: requires 13m. Control Options: 60001 Automatic Corner Override (G62) – Automatically decelerates the cutter at a corner depending on the corner angle, in order to maintain the cutting rate per unit time. 62007 Run hour and parts quantity display. 63034 DATA CENTER Storage Type B (total: 800MB) – Communication card with internal 800MB removable flash RAM card used for storing and executing NC data (of subprograms) for high-speed, high-definition finishing and supporting SGI capabilities. CNC programs can be transferred to and from a CAD/CAM system from the operator's pendant by FTP get and put commands over an Ethernet cable. 66003 Additional 48 Work Offsets (G54.1 P1-P48) – Allows for 48 work coordinate systems, simplifying multiple part fixtures. 68010 600 Macro Common Variables – Variable numbers 100-199 are reset and cleared when the power is turned off, while 500-999 are permanent. Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Payload Capacity: 400 kg Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cut...

Condition: good (used), machine/vehicle number: 2452, Year of construction: 2015, load capacity: 50,000 kg, total length: 6,000 mm, total width: 2,500 mm, operation weight: 3,400 kg, Tec Container 20" WITH DOUBLE-HOOK from Uniktruck Njdjyuhmtopfx Aa Ijlc

Condition: good (used), machine/vehicle number: 21529, Year of construction: 2024, load capacity: 50,000 kg, total length: 2,440 mm, total width: 6,250 mm, operation weight: 3,500 kg, Tec Container 20“ WITH from Uniktruck Nedpfoyuhk Sex Aa Ijlc

Condition: used, Year of construction: 2012, Max. capacity 3 Kw Cutting area 3000 x 1500 mm Nsdpfxozg Utpe Aa Ielc Max. thickness 10 mm Stainless Steel - 12 mm Mild steel - 10 mm Aluminium Modules have been upgraded from 700 Watt to 1000 Watt New laser head installed 18 months ago

Condition: used, mileage: 446,764 km, power: 294 kW (399.73 HP), first registration: 02/2019, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, disability-friendly, = Additional Options and Accessories = - DVD player - Air conditioning - Wheelchair lift - USB connections = Additional Information = Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/- 20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, and models, in every price range, in stock. We can find the right tour bus, school bus, or city bus for you, tailored to your needs or budget. All information is provided without guarantee. Errors, prior sale, and typographical errors excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku, Agata). We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more. Nsdpfxey Dvhxo Aa Ielc

Condition: used, Year of construction: 2006, operating hours: 9,237 h, Equipment: all wheel drive, Equipment: * Year of manufacture: 2006 * Operating hours: 9,236 h * Power: 157 kW / 213 hp * Weight: 19.8 t * Tyres: Michelin 23.5-25X Type A, approx. 60% * Reversing camera * Steering wheel control * Air conditioning * Tow eye * Central lubrication system * Suspension seat * Radio pre-installation Miscellaneous: * 1 previous owner * German machine * CAT service booklet maintained * Last service at 9,003 h * Signs of use * Rust * Fixed price: €39,900 net Nlsdpou D Uvysfx Aa Iec Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special rates. If you are interested, we will gladly provide you with an individual offer! Trade-in of your commercial vehicle/construction machine is welcome. Should you require a new TÜV (technical inspection), we are happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is available via our external partners at an additional cost. The information provided in advertisements, online, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical or data transmission errors. Stated features are to be checked separately if necessary. Errors and prior sale reserved.

Condition: used, Year of construction: 2023, operating hours: 111 h, 2023 | XCMG XC916E with bucket and forks | Used Wheel Loader | 111 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 30700 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 56 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Actually 111 hours nothing to report except the low-end machine battery vibration at the driver's station. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40883 Equippo" is commonly used when looking up more details online. Nedpfszg Nubjx Aa Islc 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2023, operating hours: 39 h, 2023 | XCMG XC916E with bucket and forks | Used Wheel Loader | 39 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 30700 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 56 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine almost new, thing to note machine equipped with pneumatic brake!! Vibration at the driver's station! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40884 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Nodpfxszg Ntwo Aa Islc ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2007, operating hours: 868 h, 2007 | Probst Unipose | Used Wheel Loader | 868 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 50 inspection points 47 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ Nsdpfxszg Nryj Aa Islc 📌 Inspector's Comment: Machine hour unknown and engine oil leak on the wheel loader, which was previously equipped with an edge clamp. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40885 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2011, operating hours: 16,277 h, Equipment: ABS, all wheel drive, soot filter, * Large-capacity SpaceCab driver's cab * Cab suspension on viscous dampers * Electronically controlled air conditioning system * Amberg UT-4.1 protective ventilation system * CD radio * PFREUNDT PSmart control system * Variable Shift Control VSC * Single-lever hydraulic control (multifunction lever) * Rear-view camera system with external monitor * Heated, air-suspended deluxe driver's seat * Electronically controlled load stabilizer (ECSS) * Komatsu ecot3 engine, common rail diesel engine with 104 kW * Equipment Management and Monitoring System (EMMS) * Efficient hydrostatic drive (HST) * Variable Traction Control System * Automatic transmission with 4 forward and 4 reverse gears * Fully hydraulic power steering with articulated steering * Central lubrication system * Hydraulic bucket * End-of-stroke damping * HD axles * Service brakes with fully hydraulic dual-circuit system ----Vehicle number: 12230 Nljdpfszgz Tvox Aa Ijc ----Errors and prior sale excepted.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 03/2014, loading space length: 8,600 mm, loading space width: 3,000 mm, loading space height: 900 mm, total length: 8,600 mm, total width: 2,500 mm, total height: 920 mm, suspension: steel, color: other, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Central lubrication - Drum brakes - Front suspension: Leaf - Rear suspension: Leaf - Thick Axles = More information = Nljdpfx Aozgvaqea Iec Axle configuration Brakes: drum brakes Suspension: leaf suspension Middle axle: Max. axle load: 10000 kg Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Rear axle 3: Alloy wheels; Max. axle load: 10000 kg Weights Empty weight: 8.430 kg Carrying capacity: 31.570 kg GVW: 40.000 kg Functional Height of cargo floor: 90 cm Condition Technical condition: very good Visual appearance: very good

Condition: good (used), power: 28 kW (38.07 HP), fuel type: diesel, Year of construction: 2015, operating hours: 2,800 h, Year of manufacture: 2015 Empty weight: 1.700 kg CE mark: yes Technical condition: good Visual appearance: average Nlsdpozggktofx Aa Iec

Condition: used, Year of construction: 2023, Trotec Speedy 400 Co2 Laser Engraver/Cutter, 1000 x 600mm Working Area, 120w Co2 Laser Generator, Ruby Cloud Based Laser Software Compatable, Rise and Fall Work Table. S/No. 54-5933 (2023) (Please Note: Missing Work Head Lens and Side Panel Lens) Nlodpfx Aaozdtcdo Ijc Please Note: We understand that this item is incomplete. We have obtained the attached quotation for your consideration.

Condition: good (used), mileage: 471,259 km, power: 272 kW (369.82 HP), first registration: 05/2018, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 5,200 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 8,170 mm, loading space width: 2,460 mm, loading space height: 2,640 mm, Year of construction: 2018, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, soot filter, tail-lift, = Additional Options and Accessories = - Enclosed cab - Cab - Particulate filter - Sun visor = Notes = Volvo FM370 Globetrotter 6x2*4 - Box with side doors - Load lift - Full air suspension - Euro 6 Year of manufacture: 05-2018 Mileage: 471259 VIN: YV2X922C6JA826781 Box dimensions: 817 - 246 - 264 Wheelbase: 5.20 m Zepro load lift Steering axle Full air suspension I-Shift transmission Euro 6 = Further Information = Technical information Number of cylinders: 6 Transmission Transmission: I-Shift, automatic Axle configuration Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Max. axle load: 8000 kg; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 1: Tire size: 315/70R22.5; Double tires; Max. axle load: 11500 kg; Tire tread depth inner left: 60%; Tire tread depth outer left: 60%; Tire tread depth inner right: 60%; Tire tread depth outer right: 60% Rear axle 2: Tire size: 385/55R22.5; Max. axle load: 7500 kg; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 12,188 kg Nlsdpszgf Iqofx Aa Iec Payload: 14,812 kg GVWR: 27,000 kg Functional Tail lift: Zepro, rear door Condition Technical condition: good Optical condition: good

Condition: used, maximum load weight: 54,000 kg, overall weight: 69,800 kg, axle configuration: > 3 axles, first registration: 01/2020, next inspection (TÜV): 01/2027, Year of construction: 2020, Equipment: ABS, * Faymonville Multimax F-S44-1BBY low-loader trailer * First registered: 01-2020 * Wheel recesses * Extendable by +3.2 m * Hydraulic steering with wireless and cable remote control * Independent hydraulic unit * Hydraulically extendable to 3.2 m * Wheel recesses Nljdpfxozhd D Ts Aa Ijc * Tare weight: 15,800 kg * Payload: 54,000 kg * Gross vehicle weight: 69,800 kg * More pictures and videos available via WhatsApp * Subject to change and prior sale. No guarantee.

Condition: used, functionality: fully functional, power: 68.7 kW (93.41 HP), gearing type: automatic, fuel type: diesel, color: white, operation weight: 4,365 kg, maximum load weight: 3,971 kg, tire condition: 70 %, axle configuration: 2 axles, number of seats: 1, first registration: 06/2015, brakes: other, suspension: other, Year of construction: 2015, operating hours: 1,649 h, machine/vehicle number: B3BU11053, Equipment: additional headlights, all wheel drive, cabin, hydraulics, onboard computer, rear view camera, Used Bobcat A770 without any attachments, manufactured in 2015, in good condition, with low operating hours. Nlsdpfx Aajzg Dmle Iec

Condition: used, empty load weight: 20,000 kg, maximum load weight: 66,000 kg, overall weight: 86,000 kg, axle configuration: > 3 axles, first registration: 09/2019, loading space length: 10,000 mm, loading space width: 2,550 mm, loading space height: 900 mm, suspension: air, tire size: 245/70R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, air suspension, 6 axles, BPW axles, 1st axle liftable, forced steering, lifting and lowering, ABS (anti-lock braking system), central lubrication system, extendable, width adjustable to 3m, lashing points, hydraulic ramps, front supports, rear supports, EBS. Nsdpfx Aaozhck Ss Iolc Superstructure: Telescopic, extending by 7m. Fully extended 21.25m, 10-17m in the bed. Storage box on the gooseneck: L: 2450mm, W: 2450mm, H: 450mm. Kingpin 2 inches, 1st axle liftable, 5 x hydromechanically forced steering axles, 6 x 10t BPW axles, central lubrication system, gooseneck hydraulically adjustable, hydraulic pump powered electrically by the tractor unit (hydraulics can also be connected to the tractor unit), wireless and cable remote control. Tires with tread between 50% and 99%. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis Nedpfxjwrn Iyo Aa Ijlc 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. used high-pressure pump BFT Ecotron 40.22 (650 operating hours) (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. Nledpfxewgc I Ro Aa Iec • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/1991, loading space length: 9,150 mm, loading space width: 2,500 mm, loading space height: 2,990 mm, total length: 13,700 mm, total width: 2,500 mm, total height: 4,000 mm, suspension: air, tire size: 265/70 R19.5, wheelbase: 9,110 mm, color: other, Year of construction: 1991, Equipment: tail-lift, Tailgate Plateau length: 510 cm = More information = Axle configuration Tyre size: 265/70 R19.5 Brakes: drum brakes Suspension: air suspension Rear axle 1: Double wheels; Max. axle load: 9000 kg Rear axle 2: Double wheels; Max. axle load: 9000 kg Rear axle 3: Double wheels; Max. axle load: 9000 kg Weights Empty weight: 7.700 kg Carrying capacity: 31.300 kg GVW: 39.000 kg Functional Tail lift: Nooteboom, 35000 kg Height of cargo floor: 90 cm Condition Technical condition: very good Visual appearance: very good Identification Registration number: OB-72-PZ = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages Nlsdpfjyxv Tdox Aa Iec - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, Year of construction: 2015, operating hours: 2,997 h, CAT 908M wheel loader, year of manufacture: 2015, operating hours: 2,997 h, quick coupler, fork, 1.3 m³ bucket, radio, 20 km/h, engine: CAT C3.3 [55 kW/75 hp], weight: 6,460 kg, immediately ready for operation. Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will gladly assist you. Further information can be found on our website. Errors and prior sale excepted! Quick coupler system. = Further information = Please contact Tobias Ebert for further information. Njdpfxsy T D A No Aa Ijlc

Condition: used, empty load weight: 14,200 kg, maximum load weight: 33,800 kg, overall weight: 48,000 kg, first registration: 05/2019, loading space length: 9,600 mm, loading space width: 2,550 mm, loading space height: 450 mm, total height: 135,600 mm, suspension: air, tire size: 235/75 R 17,5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit, 3 axles, BPW axles, air suspension, forced steering on axles 2 and 3, ABS (anti-lock braking system), lashing points, two-part loading ramps, hydraulic ramps, rear supports. Body: Doll 3-axle low-bed semi-trailer with wheel recesses (450 mm height), axles 2 and 3 hydraulically steered, remote control, axle load adjustment mounted on the first axle, reversing camera, low-bed length 5,500 mm, loading height 850 mm, low-bed depth 600 mm, wheel recesses 450 mm, hot-dip galvanizing, hydraulic lateral movement of the ramps (length 4,800 mm), remote control (steering functions), wheel recesses for wheelbases of 3,300 - 3,800 mm, excavator recess/crane clearance approximately 3,500 mm long with 3 pairs of pivoting lashing eyes, each rated at 10,000 daN, 2 pairs of lashing eyes, 5,000 daN, embedded in the outer frame of the rear chassis platform, 6 pairs of pivoting lashing eyes, 10,000 daN, installed in the outer frame of the low-bed platform (2 pairs in the outer frame of the chassis platform, and 4 pairs in the outer frame of the detachable driving surface of the low-bed platform). 1 pair of pivoting lashing eyes, 13,400 daN, installed next to the central box frame on the left/right side in front of the first axle (in front of the detachable driving surface), 1 pair of pivoting lashing eyes, 10,000 daN, in the front fixed support, welded into the open outer frame, 1 pair of pivoting lashing eyes, 13,400 daN, welded into the curvature to the low-bed on the main frame, 3 m spread, factory equipment. Data subject to change, subject to availability, as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Nedpfszhalyjx Aa Iolc

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 10,490 h, load capacity: 5,000 kg, lifting height: 6,050 mm, free lift: 2,160 mm, fuel type: electric, mast type: triplex, construction height: 3,280 mm, fork carriage width: 3,800 mm, fork length: 1,800 mm, empty load weight: 11,758 kg, total length: 3,640 mm, drive type: Elektro, construction width: 2,900 mm, Four-way side loader Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Battery voltage: 80V Battery capacity: 775Ah Battery year: 2025 Description: In addition to this Hubtex model, we currently have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our Hamburg and Gdansk locations. Visit our website – sago-online. Lease-purchase and financing under attractive terms are always possible. We are also happy to purchase your used equipment outright, even if you don’t purchase a machine from us. Our owner, Mr. Peter Sawitzki, will be pleased to give you in-depth advice regarding this MQ50. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons. We can also display your vehicle with us on a commission sale basis. Fork positioner Fork positioner opening range: 500 / 3,800 mm Full free lift Nodpfxey Sqcmj Aa Iolc Platform height: 580 mm

Condition: used, Year of construction: 2012, operating hours: 6,492 h, 2012 | Hitachi ZX85USBLC-3 with 3 excavator buckets | Used Midi Excavator 7t - 12t | 6492 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Nsdpfozgwrbex Aa Iolc 💰 Buy Now for EUR 38300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 69 inspection points 62 approved ✅ 7 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Various minor repairs needed on the dashboard screen, various dents on the bodywork, the boom has been repaired (good repair). 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40889 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2010, operating hours: 6,853 h, 2010 | Kubota U55-4 KE with 3 excavator buckets | Used Mini Excavator < 7t | 6853 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 71 inspection points 59 approved ✅ 12 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition, well-maintained machine. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40890 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Nlsdjzgwpyopfx Aa Ijc