Used Brinkmann Fh612A39-Mv+211 for sale (1,065)

Condition: used, Year of construction: 2020, functionality: unexamined, operating speed: 110 mm/s, reverse speed: 180 mm/s, distance table to ram: 1,500 mm, total length: 3,800 mm, total width: 4,500 mm, total height: 6,400 mm, We are offering here a new build of the machine shown. The machine was put into operation in 2020 and can be inspected by the customer. Technical data: Press force T 800 Opening force T 80 Motor power KW 55/75 + 55/75 Piston stroke 1000mm Rapid pre-fill speed mm/s 110 Working speed mm/s 6 Return speed mm/s 180 Guide diameter mm 250 Max pressure Bar 250 Useful table area mm 3,500 x 2,000 Lower table displacement mm 2000 Between columns mm 2,000 Open height mm 1500 Total front mm 3800 Total side mm 4500 Total height mm 6400 Weight kg 134,600 The MV-800E/NC-SINCRO press was specially developed for the adjustment and testing of molds, dies, and stamps. The 4 columns with 250 mm diameter made of C45E steel were specially manufactured for high stress. It features an optimized hydraulic system with a pressure of up to 250 bar, ensuring long service life and reliability. It meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLE • A structure that withstands 600 T concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. Ledewlrv Uepfx Am Nsaa • Usable table surface: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders with 400 T each. • Single-stage hydraulic unit with automatic shutoff of pre-fill speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Equipped with digital potentiometers on the upper table for displacement control and an electronic synchronization system to compensate for off-center or unbalanced forces. • The press is equipped with a side pressure switch to regulate the most suitable pressure setting for each specific task. • Glycerin manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds of the main cylinder feed. • The press has a manual cycle and an automatic cycle (activated via a test button selector): • The manual cycle allows the execution of all movements (step by step) of the press at slow speed. • The automatic cycle allows the press to perform a complete production cycle. • Electrical safety system for the upper table fall protection system. • Lower table with hydraulic removal and physical stops. • The machine features a control panel with a touchscreen display for entering operating and calibration data. • 2 optical barriers of 1,000 mm with safety level IV installed at the front and rear. • Electrical components from Siemens are manufactured according to applicable CE regulations and laws in protection class IP55. • Electrical and hydraulic functions are redundant and self-controlled. Includes an additional safety block and self-monitoring devices for operation and safety. Includes inspection and certification of correct operation and safety distance for light barriers. • Safety is ensured by a laser and area protection with light barriers of level IV.

Condition: like new (used), machine/vehicle number: MV-300E/NC, functionality: fully functional, pressing force: 300 t, table width: 1,250 mm, table length: 1,250 mm, total length: 2,300 mm, total width: 1,800 mm, total height: 3,500 mm, overall weight: 18,000 kg, pressure: 320 bar, Equipment: documentation/manual, safety light barrier, The MV-300E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for deep drawing, punching, and deburring tasks. Lasdpfx Amswphhno Noa Power tn 300 Motor Power kW 18 Piston Stroke mm 750 Approach Speed mm/s 110 Variable Working Speed mm/s 5-15 Return Speed mm/s 130 Guide Diameter mm 150 Maximum Pressure Bar 320 Table Usable Area mm 1.250 x 1.250 Between Columns mm 1.250 x 940 Vertical Clearance mm 1.000 Total Frontal mm 2.300 Total Lateral mm 1.800 Total Height mm 3.500 Weight kg 18.000 STRUCTURE AND TABLES Consists of three electrowelded blocks made exclusively of S355JR steel. Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. The bottom table has a 50 Tn hydraulic cushion with a useful surface of 950 x 750 mm and three front consoles to support the die outside the press.Incorporates a SIEMENS KP-700 COMFORT NC for the regulation of the top table stroke, speed changes, and cushion regulation. CYLINDER AND HYDRAULIC GROUP 2 single-acting cylinders with lapped sleeves, chromed pistons, and maintenance-free anti-wear guides. 2 auxiliary double-acting cylinders for fast approach and return speeds. Variable speed motorized hydraulic group. Includes cylinder decompression valve. Silent hydraulic pump. All hydraulic presses of the M series include a pressure switch located on the side, allowing the most suitable pressure setting for each type of work to be regulated. Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY Incorporates a Siemens SIMATIC S7 1200 safety PLC and a 7” KTP-700 COMFORT touch screen located on the electrical panel. Allows programming of semi-automatic and automatic modes, power, stroke, and dwell time of the top cylinder and cushion. It has a storage capacity of 300 recipes, each recipe can program all the above values. Prepared for Industry 4.0. The electrical panel includes a selector that allows choosing the type of work to be performed in manual, semi-automatic, or automatic mode and a selector to choose operation in fast or slow speed. Electrical and hydraulic maneuvers are redundant and self-controlled. They incorporate an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of correct operation and safety distance for photocells. Operation is carried out by low voltage electric pedal. For safety, they incorporate category IV photoelectric barriers located in the front working area, two fixed side guards, and a practicable guard with a magnetic disconnection detector located at the rear.

Condition: like new (used), machine/vehicle number: MV-600E/NC, functionality: fully functional, pressing force: 600 t, operating speed: 5 mm/s, reverse speed: 18 mm/s, table width: 990 mm, table length: 890 mm, overall weight: 23,000 kg, Equipment: documentation/manual, safety light barrier, The MV-600E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for stamping, deep drawing, punching, and deburring tasks. Power tn 600 Motor Power 40 HP a 440 Vca / 60hz Working Speed mm/s 5 Approach Speed mm/s 15 Return Speed mm/s 18 Piston Stroke mm 1.015 mm - (40”) Guide Diameter mm 200 Table Usable Area mm 990 x 890 x 130 (39” x 35” x 5”) Between Columns mm 990 x 370 Vertical Clearance mm 1.625 - (64”) Working Height mm 990 - (39”) Lower Hydraulic Knockout Tn 80 Lower Knockout Stroke mm 406.4 - (16”) Upper Hydraulic Knockout Tn 80 Upper Knockout Stroke mm 406.4 - (16”) Total Frontal mm 1.850 Total Lateral mm 1.700 Total Height mm 4.500 Weight Kg. 23.000 Kg. approx. Equipped with a top and bottom table made of C45E steel, machined with DIN-650 slots, and a removable upper counter-table of 990 x 890 x 130 mm for die holders with “T” slots. We ensure minimal friction in the vertical movement of the top table through the installation of maintenance-free bimetallic bushings, with perfect parallelism achieved by four chromed and ground cylindrical columns. It uses an optimized hydraulic system with a pressure of 320 Bar, ensuring prolonged durability and reliability in its performance. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of three electrowelded blocks made exclusively of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Incorporates a SIEMENS SIMATIC S7 1200 PLC and a 7” HMI KTP-700 touch panel. This allows programming of the power, cylinder stroke, and speeds, with a storage capacity of 300 memories for different work cycles. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chromed piston, and maintenance-free anti-wear guides. • Motorized hydraulic group with two speeds and automatic disconnection of fast speed. High-pressure pump and 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. A pressure switch located on the side allows the most appropriate pressure setting for each type of work. • Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel incorporates a selector to choose manual, semi-automatic, or automatic operation modes, and another selector for fast or slow speed operation. • Equipped with a PLC to internally assist with maneuvers and decompression time. • Operation is carried out using a low-voltage electric two-hand button panel. • Electrical and hydraulic maneuvers are redundant and self-controlled, incorporating an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of proper operation and safety distance for photocells. • For safety, category IV photoelectric barriers are incorporated in the front work area, two fixed side protections, and a movable protection with a magnetic disconnection detector at the rear. • Machine equipped with an IXON system for online communication in case of faults or reprogramming. • Ladder with upper walkway for repair access (scaffold). Laodpfx Aswpggiem Noa

Condition: used, Year of construction: 2006, x-travel 1300 mm y-travel 610 mm z-travel 600 mm taper Aufnahme 50 Axis 3 control Heidenhain 530 Lodpfxsud Trdo Am Neaa ja 20

Condition: used, This Listing is for a refurbished Laboklav 80 MV Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 80l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 740 x 915 x 600 Ljdpfsxx Aqaox Am Njaa chamber dimensions (Ø x d in mm) 410 x 610 Steam generator 6,6kW Vacuum incl. pre- and postvacuum, heating during postvacuum Fast re-cooling with double jacket 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Condition: excellent (used), Wide belt sander VIET 211 Laedsyf T Ukspfx Am Nja Working width: 1100 mm Working height: 3–160 mm Number of units: 2 Roller Roller Main motor power: 11 kW

Condition: used, mileage: 296,407 km, power: 315 kW (428.28 HP), first registration: 09/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, loading space length: 5,000 mm, loading space width: 2,440 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, navigation system, parking heater, * Sun visor * ABS (Anti-lock Braking System) * ASR (Anti-Slip Regulation / Traction Control) * ESP (Electronic Stability Program) * Radio * On-board computer * Reverse warning system * Auxiliary heater * Cruise control * Air horns * Hill-start assist * Electric window lifts * Electrically adjustable mirrors * Heated mirrors * Central locking * Fog lights * Roof hatch * Rear window * Driver comfort seat * Seat heating * Rear axle differential lock * Lift/steerable axle * Tandem trailer coupling * 2-line air connection * Cornering lights * Navigation system * Hydraulic connection for trailer * Tire pressure monitoring system * 12-speed (transmission) * Suspension: leaf/air * Payload: 11,105 kg * Retarder: High Performance Engine Brake Lasdpjxvvycofx Am Nja ----Special bodywork: Crane: Hiab XS 211 EP-5 Hiduo, foldable, radio remote control + walk-along control, 5-stage hydraulic extension (working height approx. 18.4 m), fully hydraulic outriggers, oil cooler, 6th and 7th hydraulic circuits for rotary servo and grab operation. Load chart readings: lifts 6.9 t at 2.7 m, 3.95 t at 4.7 m, 2.7 t at 6.5 m, 1.98 t at 8.4 m, 1.5 t at 10.5 m, 1.2 t at 12.7 m, 1.02 t at 15 m. ----Superstructure: three-way tipper body with pallet capability, steel front wall, spring-assisted aluminum side boards left and right (pendulum-mounted and foldable), aluminum rear wall, steel floor, lashing eyes. ----Axle load measuring system, tinted windscreen Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!! ALL INFORMATION GIVEN WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. All sales contracts, invoices, proforma invoices, orders, and sales talks are based on our General Terms and Conditions (see legal notice/imprint).

Condition: used, mileage: 296,407 km, power: 315 kW (428.28 HP), first registration: 09/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, loading space length: 5,000 mm, loading space width: 2,440 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, navigation system, parking heater, * Sun visor * ABS * ASR (traction control) * ESP (electronic stability program) Lodpfxoxvvyie Am Njaa * Radio * On-board computer * Reversing warning system * Auxiliary heater * Cruise control * Air horns * Hill start assist * Electric windows * Electrically adjustable mirrors * Heated mirrors * Central locking * Fog lights * Roof hatch * Rear window * Driver comfort seat * Seat heating * Rear axle differential lock * Lift/steerable axle * Tandem trailer coupling * 2-line air connection * Cornering light * Navigation system * Hydraulic connection for trailer * Tire pressure monitoring * 12-speed * Suspension: leaf/air * Payload: 11,105 kg * Permanent brake: High Performance Engine Brake ----Special body: Crane: Hiab XS 211 EP-5 Hiduo, foldable, radio remote control + walk-along control, 5-stage hydraulic extension (working height approx. 18.4 m), fully hydraulic outriggers, oil cooler, 6th and 7th control circuits for rotation and grab operation. Printed load chart: Lifts 6.9 t at 2.7 m, 3.95 t at 4.7 m, 2.7 t at 6.5 m, 1.98 t at 8.4 m, 1.5 t at 10.5 m, 1.2 t at 12.7 m, 1.02 t at 15 m. ----Body: Three-way pallet tipper body, steel front wall, spring-assisted aluminium drop sides left & right (pivoting and fold-down), aluminium tailgate, steel floor, lashing eyes. ----Axle load measurement system, tinted windshield. Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. All purchase agreements, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see imprint).

Condition: new, pressure 30 t stroke 350 mm table surface area Arbeitsbreite 750 x 260 mm pressure 221 bar oil volume 37 dm³ work speed max. 9,8 mm/sec return speed 14 mm/sec total power requirement 3 kW weight of the machine ca. 385 kg Inner diameter of the cylinder [mm]: 130 Laedpfei A S I Djx Am Nsa Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed adjust, making this motorized hydraulic press perfect for precision work is suitable.

Condition: good (used), Absolute encoder, encoder, encoders, absolute encoders, absolute encoders, function encoders, resolvers, incremental encoders -Manufacturer: Heidenhain, Incremental Encoder -Type: ROD 450 3600 .: 211 756 1G -Shaft: Ø 10 x 20 mm -Number: 2x encoders available -Price: per piece -Dimensions: 160/90/H60 mm Lsdew Adamjpfx Am Njaa -Weight: 0.4 kg/piece

Condition: good (used), Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -DSB: Type UCP 211 bearing block -for: 55 mm shaft -Price: per piece -Number: 13 pieces -Dimensions: 220/60/H125 mm -Weight: 3.4 kg/piece Laedpfx Aofk Afbem Nea

Condition: used, Flange connection, V-flange, sockets, double nipples, pipe coupling, angle screw connection Laedpfxeq N E N Te Am Nja -Sleeves/double nipples: 1 to 3" 211 pieces -Type: 23 different versions, see photos/parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H200 mm -Weight: 183kg

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, compact rotators, oil-hydraulic drive Ljdjfz Rdmjpfx Am Noaa -Manufacturer: Thumm, oil hydraulic drive Type 211 -Mounting holes: Ø 30 mm -Dimension: Ø 175 x 320 mm -Weight: 23 kg

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Lasdelug Sdopfx Am Nsa -Transport roller: diameter 211 mm -Transport width: 745 mm -Shaft: Mounting Ø30 x 125/115 mm -Quantity: 1x transport roller available -Total dimensions: Ø 211 x 985 mm -Weight: 47 kg/piece

Condition: used, Gear motor, electric motor Ljdocvm Uzepfx Am Nsaa -Speed: 211 rpm -Power: 0.25 kW -Construction: B5 -Diameter hollow shaft: Ø 22 mm -IP protection -Dimensions: 335/140/H190 mm -Weight: 9 kg

Condition: new, cutting diameter 180 mm capacity 90 degrees: square 180 x 180 mm capacity 90 degrees: flat 200 x 150 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 x 110 mm capacity 45 degrees: flat 125 x 110 mm capacity 60 degrees: flat 70 x 70 mm capacity 60 degrees: square 70 x 70 mm capacity 60 degrees: round 70 mm turning speed range: 40 / 80 m/min saw band length 2.130 x 20 x 0,9 mm total power requirement 0,75 kW weight of the machine ca. 190 kg Equipment: - compact / robust manual band saw - with one-sided miter device up to 60° left - hydraulic lowering of the saw bow * stepless feed adjustment * limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base Ledpfjxaa Tnsx Am Njaa - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructions

Condition: used, Year of construction: 1999, Heller MV16 103 Serial number: 32-44069 Year of manufacture: 1999 Ledpfx Asydi H Tom Nsaa Spindle speed: 45–16,000 rpm SK40 X-axis: 630 mm Y-axis: 630 mm Z-axis: 630 mm Number of tools: 80 Tool diameter: 70/150 mm (with free adjacent positions) Tool length: 320 mm Number of pallets: 2 Pallet dimensions: 400x500 mm Maximum pallet load: 500 kg B axis: NC Tool length measurement: Yes Control: Sinumerik 840D Probe: Heidenhain

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 3742441, total width: 1,820 mm, total height: 2,240 mm, total length: 2,850 mm, working width: 1,100 mm, grinding width: 1,100 mm, workpiece weight (max.): 2,000 kg, grinding height: 163 mm, working height: 920 mm, height adjustment type: electric, workpiece height (max.): 160 mm, grinding belt width: 1,120 mm, 2 Aggregates: 1. Aggregate with segmented sanding shoe and roller 2. Aggregate with segmented sanding shoe Cleaning brush Continuously adjustable feed speed Electric height adjustment Belt air blowing device Laodpfxox E S Sij Am Nsa

Condition: excellent (used), 12 kW Working width 1100 mm 2 sanding belts Ljdpevk Sqwsfx Am Noaa Tables at the front and back You can call or write to us. We speak and write German and Russian. You can also send us messages in English.

Condition: used, Year of construction: 1986, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm total power requirement: 20 kW weight of the machine ca.: 8 t Lasdewvblaspfx Am Nja Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. *

Condition: excellent (used), Vacuubrand chemistry diaphragm pump Here we offer a Vacuubrand chemistry diaphragm pump. VACUUBRAND VARIO chemistry diaphragm pump MV 10C EX VARIO Technical data: Max. Pumping speed 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temp., lower limit, operation, in °C 10°C Ambient temp., upper limit, operation, in °C 40°C Ambient temp., lower limit, storage, in °C -10°C Ambient temp., upper limit, storage, in °C 60°C Max. Max. outlet pressure absolute in bar 1.1 bar Connection on suction side Small flange KF DN 25 Connection on pressure side Small flange KF DN 16 Nominal power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Lasdpfx Ameq Suwmj Noa Nominal speed in min-1 1500 min-1 IP protection class to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension B in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU-PURE®) 42 dBA EX approval Pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, external chamber with inert gas purging: II 2G Ex h IIB T4 Gb X, Outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency Voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), KEB Brinkmann .502-62B0 engine SN: 16100995, used, good condition, 100% functional, scope of delivery as per photos Lajdev H H Ddspfx Am Noa

Condition: ready for operation (used), Brinkmann motor consisting of Siemens 1LE10011DA634FB4 - Z - three-phase motor SN: UD 1311/1580810-001-001,Z see nameplate + Brinkmann Pumps 6UMFR0AA-D05105 control SN: 90549LJP00002,used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Laedpfsldln Usx Am Nja

Condition: ready for operation (used), Brinkmann motor consisting of Siemens 1LE10011DA434FB4 - Z - GP three-phase motor SN: UD 1312/1583831-001-002,Z see nameplate + Brinkmann Pumps 6UMFR1AA-D05104 control SN: 90549MFQ00001,used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Laodpfxsldlpco Am Nea

Condition: new, Brinkmann Pumps SBG1102-V-Z+095 Pump No., unused, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ledpfsk Shwrox Am Noaa