Used Bruderer Bsta 25 for sale (15,189)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, in a basic lightweight design, drawbar plate with 2 interchangeable kingpins Curved front closure, patented 24 tons, 2-speed landing gear, single-sided operation, with a straight lower part, without thrust compensation Underrun protection, foldable Half-shell fenders Tow hitch at the rear Axles + suspension SAF disc brake axles with a 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rusting Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 keyed coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Itodpfx Aoi Ri Nfenwjh with raising and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the tractor unit's display, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side marker lights") 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole keyed sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw fitting, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Steel round tipper body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders and a ladder on the front wall. Greenline - conical and aerodynamic tipper body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a pivoting flap with a double-hinge hinge, externally mounted with 2-fold hook lock. 2 clamping screws with cam locks on the sides at the bottom. Side walls are continuously 4 mm thick, floor is 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with ladder, connecting plate for air/electricity and brakes with ample space for optimal operation. Rolltarp, one-sided for storage on the right, with central locking on the left Registration country/signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline prepared for license plate holder, single-row Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rusting Support legs, black coated Tipper body, RAL color of your choice, solid color Rolltarp, RAL color of your choice, solid color Available in a thermally insulated version!

Condition: used, Year of construction: 2018, Manufacturer : SPXFLOW Lightnin Model : HP-25 A Year: 2018 Type : Stirrer Diameter of the stirring blade: 110 mm Length of the stirring shaft: 825 mm Shaft diameter: 12.5 mm Required pressure: 6 bar Manual pin-type lifting system Lifting stroke: 36 cm Maximum width of a container: 72 cm Dimensions: floor to >mixing head (lower position): 55 mm Dimensions: floor to >agitator head (top position): 415 mm Dimension : 110 x 103 x 150 cm Itjdpfozcznyjx Anweh Technical documentation available

Condition: used, Year of construction: 2018, operating hours: 18,735 h, lifting height: 4,870 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, fork length: 1,190 mm, fork width: 1,150 mm, total height: 2,260 mm, total length: 2,320 mm, total width: 1,190 mm, color: silver, Empty weight: 4.651 kg Lifting capacity: 2.500 kg Iedpfjzcyzlex Anwjth - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516345J00644 - Operating hours: 18735 - Lifting capacity: 2500kg - Lifting height: 4864mm - Overhead clearance: 2260mm - Free lift: 1620mm - Fork length: 1190mm - Maximum fork width: 1150mm - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: Side-shift, Fork positioner - Options: Full cabin, Joystick, Free-lift, Work lights - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: 4 PzS 620 - └ Battery year of construction: 2019 - └ Capacity: 620Ah - └ Battery voltage: 80V - Transport dimensions: 2328mm x 1199mm x 2260mm (l x w x h) - Transport weight [kg]: 4651kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 1,000 mm, total length: 3,650 mm, total height: 1,850 mm, overall weight: 600 kg, 1 Hambi Mattenschneidemaschine TV 25 V, working width 2.50 m, year of manufacture 2000, max. 12 mm single bar or 8 mm double bar, cutting time forward/backward approx. 13/10 sec. Connected load 3 kW. Ijdpfjvxtc Dsx Anweth

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Pressing force: 800 kN Working length: 2,500 mm Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Itodpfxey Avnps Anwjh Weight: 6,200 kg Motor: 7.5 kW Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: good (used), Code: 0414 Brand: SCM MINIMAX Model: ME 25 - CE Standard Automatic edge bander for joinery, furniture, custom-made furniture, panels, doors, kitchens and various – CE Standard – Year 2017 Technical data: Thickness of roll edge 0,4–3 mm Max edge thickness 5 mm Ijdpfx Ajzfapmonwjth Min/max panel height 12/50 mm Panel feed speed 7 mt/min Work surface height 904 mm Min panel length/width 190/65 mm High-grip toothed feed belt Panel support roller conveyor along the entire length of the machine Composition: Gluing unit: Glue tank capacity 1 kg – Motor power 0,18 Kw End cutting unit: Motor power 0,37 Kw – End trimming blade diameter 90 mm Z 20 – Blade rotation speed 12000 rpm Overlapping trimming unit: Upper and lower motor power 0,75 Kw – Vidia cuttersn diameter 75 mm Z 4 – Cutter rotation speed 12000 rpm Edge scraper unit for finishing Pvc/Abs edges Glue scraper unit for removing any excess glue Suction inlet diameter 120 mm Overall dimensions mm 1950 x 700 x 1250 h Weight kg 430

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Year 2020 Itodpfswigbmjx Anwjh For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: excellent (used), CTS Temperature Test Chamber T-40/25 Technical Data Manufacturer: CTS Clima Temperatur Systeme Type: T-40/25 Temperature Range: -40 °C to +180 °C Test Chamber Volume: 25 liters Temperature Change Rate: Heating: 8.0 K/min Cooling: 6.5 K/min Temperature Deviation over Time: ±0.5 to ±1 K Test Chamber Dimensions (W x D x H): 350 x 240 x 300 mm External Dimensions (W x D x H): 595 x 580 x 860 mm Itjdpfszcxmtex Anwoh Electrical Data: Rated Voltage: 230 V 1/N 50 Hz Rated Power: 1.86 kW Rated Current: 8.53 A Protection Class: IP20 Refrigerant: R404A Filling Quantity: 0.8 kg Operating Pressure: 25 bar Test Pressure: 20 bar Features: LCD control panel Digital setpoint/actual value display RS232 interface Stainless steel test chamber material 1.4301 Window 200 x 200 mm Lockable door Air-cooled refrigeration unit EASYLog data logger 3 stainless steel shelves Weight: approx. 90 kg For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of supply: (See picture) Inspection possible by appointment. Loading can be arranged. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, mileage: 19,000 km, power: 164.75 kW (224.00 HP), first registration: 12/1998, fuel type: diesel, axle configuration: 4x4, wheelbase: 3,600 mm, fuel: diesel, color: red, driver cabin: other, gearing type: mechanical, Equipment: additional headlights, all wheel drive, differential lock, fog lights, trailer coupling, truck registration, MAN TLF 16 / 25 bodywork Metz, all-wheel drive Crew cabin for 1 + 5 Differential locks Itsdswhfl Uopfx Anwjh around 19,000 km First registration 12 / 1998 2400L tank Light mast at front wall of body Perimeter lighting Roof box Storage for power/lighting Snow chains PA cabin S-attack hose reel Branch guard Martin siren system Front flashers New inspections (roadworthiness/emissions/safety) available upon request at extra cost Price upon written enquiry -Sale only to authorities and commercial customers-

Condition: ready for operation (used), Column drill press GILLARDON GB 25 -Drilling capacity / steel 32 mm -Drilling capacity / cast iron 35 mm -Speed range - stepless 60 - 1800 rpm -Direction of rotation / right - left -Morse taper MK 3 -Overhang 290 mm -Quill travel 175 mm -Table area 450x360 mm -Table height adjustment by means of hand crank Ijdezdb H Sopfx Anwjth -Threading device -Coolant system -Drill chuck -Analog speed display -Foot switch -Emergency stop -Documentation Dimensions: L x W x H 0.7 x 0.7 x 2 meters / Weight: 490 kg Errors and omissions excepted.

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg Ijdox Suzaepfx Anweth * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 5,475 h, load capacity: 2,500 kg, lifting height: 3,670 mm, fuel type: electric, mast type: simplex, construction height: 2,525 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Standard Condition: Refurbished, without warranty Technical condition: very good Front tire type: Non-marking Front tire condition: 80 - 100% Iodpfx Asyn Amhsnweth Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 620Ah Battery type: PzS Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, rotating beacon.

Condition: excellent (used), functionality: fully functional, Eccentric press Inventory No. 01 Ijdpfjzcf Hyox Anweth Manufacturer: ter Hart Type: EP 25 Press force: 25 tons * Stroke adjustment: 6 to 60 mm * Adjustable ram: 35 mm * Table dimensions: 360 x 320 mm * Installation height: 275 mm * Overhang: 175 mm * Foot pedal operation * Connection: 1.5 kW * Weight: 850 kg * Control panel with emergency stop (2 units)

Condition: excellent (used), functionality: fully functional, Eccentric press Inv. No. 02 Manufacturer: ter Hart Type: EP 25 Pressing force: 25 tons * Stroke adjustment: 6 to 60 mm Isdszcf E Aepfx Anwoth * Adjustable ram: 35 mm * Table dimensions: 360 x 320 mm * Installation height: 275 mm * Overhang: 175 mm * Foot pedal operation * Connection: 1.5 kW * Weight: 850 kg * Control panel with emergency stop (2 units!!!)

Condition: used, Year of construction: 2015, operating hours: 12,440 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 185 mm, nominal power (apparent): 30 kVA, spindle speed (max.): 42,000 rpm, input voltage: 415 V, type of input current: three-phase, Matsuura Lumex Avance-25 – Hybrid Additive Manufacturing System (used) For sale is a Matsuura Hybrid Additive Manufacturing System, Lumex Avance-25. This system combines additive manufacturing (sintering) and subsequent machining (milling) in a single process. As such, the system is particularly suitable for applications where functional surfaces or precise geometries are to be machined directly after the build. The system is designed as an open system: build parameters can be adjusted and further developed at the user’s discretion and based on their own experience. This also makes it ideal for research purposes and for the development of new material and process parameters. The Lumex Avance-25 is configured for titanium; the air filter and extraction system are explosion-proof for powder handling. The following powder types can be used: Martensitic steel II (1.2709) Stainless steel 630 Stainless steel 316L Cobalt chrome Nickel alloy 718 (Inconel 718) Aluminum Si10Mg Titanium 6Al4V (with corresponding shielding gas supply) It is possible to build with other materials or powder types if the build parameters are appropriately determined. Details: Year of manufacture: 2015 Spindle hours: 12,439 Laser hours: 3,476 Possible build size: approx. 250x250x180 Max. table load: 90 kg Laser power: 40-400 watts (variable adjustment) Laser wavelength (nm): 1070 +/- 5 Tool positions for milling tools: 20 Accessories: Lumex CAD/CAM system Basic and Advanced function for sintering Itsdpfxoy Drwvj Anwsh Basic and Advanced function for milling Geometry processing Simulation Generation of process data Transfer of process data Support function for processing and quality 1x Ruwac industrial vacuum cleaner 1x Ruwac wet separator NA35 for potentially explosive materials.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, power: 36 kW (48.95 HP), fork carriage width: 1,470 mm, fork length: 1,200 mm, empty load weight: 4,350 kg, total length: 3,084 mm, drive type: Diesel, construction width: 1,350 mm, Rough terrain forklift Itsdpfx Aszc Samjnwsh Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: very good Front tire type: Pneumatic Front tire size: 300-15 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 7.00-12 Rear tire condition: 80 - 100% Description: The MSI 25 is a versatile mast forklift and unique in its class. It can be used in the wood and paper industry, in recycling, in logistics applications, etc. Whether in industrial buildings, in the yard, or on light terrain, the hydrostatic transmission, combined with the powerful engine and two large-diameter drive wheels, enables precise and smooth operation. This machine ensures daily productivity gains. For efficient maneuvering, the MSI 30 features a steering axle with an integrated cylinder, giving it a very small turning radius. Thanks to the numerous available attachments, the MSI 30 is extremely versatile and suitable for lifting, loading, unloading, and storing long loads. It has a lifting capacity of 3.0 t. Side shifter, 3rd valve, half cab, full cab, full free lift, CE certificate.

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Iodpfx Anjzdlwgswsth Equipment and technical data: - Motor 15 kW - 400 V - 3000 rpm - Dust extraction port diameter 250/300 mm - Dimensions: approx. 900 x 750 x 1000 mm - Weight: approx. 190 kg Availability: short-term Location: 63934 Röllbach

Year of construction: 2025, condition: excellent (used), functionality: fully functional, We offer an unused single-screw extruder from stock. The system was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory use, material development, small-scale production, or custom extrusion applications. Technical Data & Features • Screw diameter: 30 mm • L/D ratio: 25:1 • Condition: unused / only test runs • Drive: 4 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Die: strand die can be adapted or manufactured new upon request • Design: robust laboratory / pilot-scale construction Itsdpfx Aoxxim Ienwoh • Mobile: base plate with heavy-duty castors – easy to position Special Features • Very compact design • Ideal for filament, profiles, lab trials and material testing • Barrel and screw in excellent condition (see photos) • Immediately available from stock

Condition: used, functionality: fully functional, Year of construction: 2014, fuel type: diesel, Forklift Still RX70 - 25 / diesel Year of manufacture: 2014 Safety inspection (UVV): 03 / 2027 Overall height: 2.67 m Lifting height: 4.25 m Fork length: 1.2 m Particulate filter - Eberspächer Full cabin Itedpfxjy Hp Hms Anwoh Side shifter Fork positioner

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 254 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,150 mm, empty load weight: 4,290 kg, drive type: Diesel, construction width: 1,155 mm, Diesel forklift Load centre: 500 Mast type: Triplex Technical condition: very good Front tyres type: superelastic Front tyres size: 7.00-12 12 Rear tyres type: superelastic Rear tyres size: 6.00-9 10 Itedjvla S Ejpfx Anwjh Sideshift, 3rd valve, 4th valve, rear work lights, heater, soot filter, full cabin, full free lift, CE certificate, safety light,

Condition: good (used), Year of construction: 1998, functionality: fully functional, Equipment: CE marking, Processing line for solid wood and MDF boards, including rotary tables and 2 Weeke 500 drilling machines, with stacking units. The line has been dismantled due to the company ceasing its solid wood operations. The line can be divided, and the machines can be purchased separately. Itsdpfxjzb D Nko Anweh

Condition: used, mileage: 25,000 km, power: 150 kW (203.94 HP), first registration: 10/1989, fuel type: diesel, empty load weight: 6,940 kg, overall weight: 12,000 kg, axle configuration: 4x4, next inspection (TÜV): 05/2027, fuel: diesel, gearing type: mechanical, number of seats: 6, total length: 7,250 mm, total width: 2,500 mm, total height: 3,050 mm, water tank capacity: 2,450 l, Equipment: all wheel drive, differential lock, parking heater, All-wheel drive, Auxiliary drive, Differential lock, Plastic water tank, 2.45 m³ (2,450 L), Pump, 1600 L/min, 272 operating hours, 6 gears, Auxiliary heater, Itedpfx Anezdq Anjwoh Location: 97688 Bad Kissingen More pictures to follow. German registration. There may be markings on the vehicles. Mileage according to odometer. The vehicle is preferably sold to businesses or for export; Private sale possible, subject to approval. Sale without warranty. The above information is non-binding; errors/changes and prior sale are subject to change!

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Semi-automatic compact glass storage system 25 positions Itodpfxjzdylxs Anwjh Maximum glass size: 3210 x 6000 mm Drawer load capacity: 6000 kg Total loading capacity: 150000 kg (150T) In very good and clean condition Good working order, tested As is See video

Condition: new, GMN for Schaudt Mikrosa TSE 70 c x 25 TSE 70c - 25/8 spindle SN: 385706, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itodpfsnri Eujx Anweh

Condition: ready for operation (used), Bosch SM 25/50-C servo module SN:416106, used, minor signs of wear, 100% functional, scope of delivery as per photos Ijdpfeldlr Ujx Anwsth