Used Ca. 3,15 Lfm. Kragarmregal Langgutregal H: 250 Cm 140 Kg/Arm Meta Multistrong for sale (102,590)

Condition: used, Year of construction: 2001, Foundry Manipulator CLANSMAN DYNAMICS Year of construction: 2001 Nlsdpfezmw Ipex Agrog Max capacity: 250 KG

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block Nledpou T Tp Uofx Agrsg -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 6 pieces -Prism width: 100 mm -Dimensions: 6x 250/140/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 250/280/H190 mm -Total weight: 75.1 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Nedpfx Agowra Ewjrelg Year of construction: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, gas control section, control cabinet, feedwater pump and the available rough and fine fittings.

Condition: excellent (used), Year of construction: 1997, 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm boiler capacity max. : 1.250 kg/h working pressure : 16 bar increased test pressure : 28,8 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 2000 equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, Nledpfjt E Rwnex Agrsg ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, fittings for gas supply, switch cabinet, feed water pump, and the existing small and large-scale fittings. Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m².

Condition: excellent (used), Year of construction: 2003, 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm boiler capacity max. : 1.250 kg/h working pressure : 16 bar increased test pressure : 28,8 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 2000 equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, Nsdpfet E Rntox Agrslg fittings for gas supply, switch cabinet, feed water pump, and the existing small and large-scale fittings. Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m².

Condition: good (used), Technical data for pallet rack beam: Nledpfxexb Tp Es Agrjg Racking system: Metall Sistem Type: Unipal Scope of delivery includes: 01x pallet rack beam, used Material color: yellow Box profile: 140 x 45 mm Clear width: 1,800 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur extra costs, which can be quoted separately depending on the place of delivery or scope of delivery.

Condition: as good as new (ex-display), Year of construction: 1991, machine/vehicle number: Mü0136, Technical data: 1 Demag KBK column slewing crane NL 2x 250KG with 2 booms Payload at full radius 2x 250KG / 0.25ton payload Height: approx. 4.23m, UK boom: approx. 3.75 + 3.2m Projection: approx. 2+3m, hook height: approx. 3.3m + 2.75m Weight completely approx. 700 KG Njdpfx Agjqmillorslg with 2x 250Kg Demag PK chain hoist with floor control Connection to 400V 16A, swivel range 2x 270° Crane is dismantled and packed on a pallet Good condition, see pictures Location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment

Condition: excellent (used), Weishaupt WM-L20/1a. 1400 kW. 118 kg/h. Year of manufacture: 2008. Njdpfx Ajig Tw Njgrjlg

Condition: new, cutting diameter 250 mm saw band length 3150 x 27 x 0,9 mm table height 700 mm cutting width 250 x 320 mm cutting speed 25 - 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 120 mm 120 mm 190 mm Impact energy 190 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device Nlodpfxoff Efrs Agrog - Belt tension control - Electric automatic cooling system - Material suggestion

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm Nlsdpfx Agjmhhy Nsrog - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof support: Hot-dip galvanized bolted system Scope of delivery: 9 Racking uprights, height 4,230 mm, with base, usable depth 1,200 mm 27 Cantilever arms with 1,200 mm usable depth, with stop 9 Roof supports with 1,500 mm overhang, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms adjustable in height in 100 mm increments - 3 bolt-on cantilever arms with a depth of 1,200 mm, with stop, per upright = 4 storage levels on top of each other - Including longitudinal and diagonal braces with 1,500 mm center distance - Racking length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subsoil must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the condition of the ground, its load-bearing capacity, and any necessary official permits. Njdpfjh R Taqsx Agrolg The racking uprights must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the racking uprights on the top storage level have a minimum overhang of 500 mm from the top edge of the upright.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Nledpfjd Tbbdex Agrjg Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. Njdpfxed Tqalj Agrjlg The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) Nedpfxofdkbhs Agrslg - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. The material is packed in a way that allows for easy unloading. Nodpfx Aofdkb Tjgrelg When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Rack height 2,560 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. Nodpfxjguk A He Agrjlg The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard Nodpofdkb Ujfx Agrjlg - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid Nljdeguk Dkopfx Agreg - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized Nodoguk Dvepfx Agrslg - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: used, Calzoni hydro motor 250bar MR350E - removed from K-Tec 350 - S - removed from running machine - fully functional Nledsrr Efvepfx Agrsg manufacturer: Calzoni type: MR350E sparepart no.: 10084268 manufacturer no.: MR350E-F2N1N1C1NX Dition: gebraucht

Condition: used, mileage: 979,881 km, power: 184 kW (250.17 HP), first registration: 03/2016, fuel type: diesel, tire size: 385/65R22.5, tire condition: 60 %, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, fuel tank capacity: 700 l, color: orange, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,850 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, tail-lift, = Additional Options and Accessories = - Radio/CD = Further Information = General Information Cab: Day Cab Technical Information Number of Cylinders: 6 Axle Configuration Suspension: Air Suspension Front Axle: Tire Size: 385/65R22.5; Tire Tread: 60%; Reduction: single reduction Rear Axle: Tire Size: 315/70R22.5; Tire Tread: 50%; Reduction: single reduction Weights Unladen Weight: 10,105 kg Payload: 10,395 kg GVW: 20,500 kg Functional Tail Lift: DHOLLANDIA 2000KG Condition Damage: none Nsdpjz Dq Egsfx Agrjlg = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-mail: - Website:

Condition: used, mileage: 185,673 km, power: 182 kW (247.45 HP), first registration: 12/2011, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, emission class: euro5, loading space length: 3,750 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, soot filter, DAF LF 55.250 Meiller 3Skipper + MKG HLK106-HP Crane, 4x2 Suspension: Leaf spring Nsdpfoz Awzbjx Agrjlg Wheelbase: 3.40 m Payload: 7900 kg MEILLER Type: Three-way tipper Year of manufacture: 2011 Length: 3.75 m Width: 2.42 m Height: 0.60 m MKG Crane Type: HLK 106-HP Year of manufacture: 2011 2x Hydraulic extension 2x Hydraulic outrigger 5th and 6th control + Remote control We would be happy to assist you with financing/leasing options through our partners. All information is provided without guarantee. Errors and prior sale are subject to change.

Condition: excellent (used), Year of construction: 1996, machine/vehicle number: MBMA2021, Technical data: 1 steel column slewing crane NL 250 KG Available 3 times Payload at full radius 250KG payload Height: approx. 3.5m, UK boom: approx. 2.95m Projection: approx. 2.2 m, hook height: approx. 2.5 m Weight completely approx. 350KG with 250kg chain hoist with floor control Connection to 400V 16A, swivel range 270° Crane is dismantled and packed on a pallet Good condition, see pictures Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment Nljdpfx Agoqwn Ukjrsg

Condition: used, mileage: 541,000 km, first registration: 12/2017, fuel type: diesel, fuel: diesel, emission class: euro6, Year of construction: 2017, Iveco Eurocargo 140 E 250 freezer truck with Mitsubishi TDJ 430 D refrigeration unit, Lamberet Multitemp – box body and tail lift. Chassis: • Emission standard: EURO 6 C • 250 hp engine, 6,728 cm³ • Cruise control • Leaf/air suspension • Automatic transmission • Lane departure warning system • Brake assist system • Hill start assist • Differential lock • ABS • ASR / switchable • Airbag • Air conditioning • Central locking • Double bench seat for passenger (3-seater) • Electric windows • Fog lights • Headlight range adjustment • Tire size: 285/70 R 19.5 • Tread depth: 8/6/6/5/9/13 • 14,000 kg GVW • Unladen weight: 8,580 kg • Payload: 5,420 kg! • Vehicle overall dimensions: 9,130 x 2,600 x 3,450 mm (L x W x H) Body: LAMBERET freezer box body, manufactured in 2017 • 17 pallet spaces • 3-leaf portal doors at the rear • Aluminum edge rails, 2x right and left, bottom and top • Lashing rails, double, right and left • Floor: Aluminum tread plate • Interior dimensions: 6,980 x 2,470 x 2,200 mm (L x W x H) Nlodpfewmmxtjx Agrsg • BÄR BC1500 S4- B4 tail lift, vertical • 1,500 kg load capacity Refrigeration unit: • Mitsubishi TDJ 430D Multi refrigeration unit (manufactured in 2017): • Engine / Electric (380 V) • Remote control in the cab • Temperature recorder - German vehicle - 1st owner! - TÜV / MOT / Inspection: new Errors and prior sale are subject to change!

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable Equipment: - V-shaped drawbar - 10 lashing points - Manual hand pump Net: €6,453.78 / Gross: €7,680.00 Article number: FBA227401910.01 Technical Data: • Brand: Vezeko • Model: Husky Car FB 27.39 • Vehicle Type: Lowering Trailer • Vehicle Condition: New • First Registration: Without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 394 x 187 x 10 cm • External dimensions (L x W x H): 553 x 254 x 80 cm • Loading height of the floor: 44 cm • Permissible total weight: 2,700 kg • Tare weight: 705 kg • Payload: 1,995 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/50R13C Nledpfxsydra Ne Agrsg • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • 15mm multiplex floor panel, made of birch wood, with anti-slip coating - extremely robust • Side walls made of anodized, double-walled aluminum profile 10cm • Insertion options at all corners for, e.g., tarpaulin frame • Very stable steel frame welded • Frame completely hot-dip galvanized • Many stable cross members, resulting in high point load capacity • Loading area can be lowered hydraulically, license plate holder at the rear, can be swung out for loading • Mechanical safety locking of the pivoting axle during operation • With overrunning protection at the rear • Additional longitudinal struts continuously welded in • Toolbox at the front • 10 lashing points within the V-shaped cargo rail, rubber-coated, tensile force (750 DaN/kg) • ALKO overrun device and parking brake • ALKO coupling head • Very stable V-shaped drawbar, REINFORCED • Reverse drive automatic • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Rear position lights in LED • Lighting recessed in the rear frame • Support wheel with clamping bracket in the middle _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -