Used Carbon Electrodes 9 Kg for sale (74,665)

Condition: new, Year of construction: 2026, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Hjdpfsw Ivqmex Ab Nenl essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 10,000 mm, inner dimension height: 5,000 mm, filter area: 250 m², volume flow: 16 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. Hnodpsu Ey Dlefx Ab Njl 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2026, Blast house components. Flat conveyor floor, cross conveyor screw, bucket elevator, air sifting, sieve, blasting medium hopper, blasting unit, filter system, fan, air ducts, lamella suction wall, blow box, electrical control as a kit without assembly. Alternatively, the plant components can also be assembled by our specialist fitters on your premises. Hedpfxshc T Nlj Ab Nenl

Condition: excellent (used), Year of construction: 1993, Gas tank used for CO₂ (carbon dioxide). Working pressure: 20 bar. Year of manufacture: 1993. Hjdpfxoy R Uq Ss Ab Njnl We also have in stock other tanks and trailers for different gases: oxygen, nitrogen, argon, hydrogen, helium, methane, ethylene, N2O, LNG, CNG

Condition: used, mileage: 342,745 km, power: 278 kW (377.97 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 13,830 kg, maximum load weight: 12,170 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,300 mm, next inspection (TÜV): 12/2025, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, compressed air brake, crane, cruise control, differential lock, fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Complete documentation with test reports available * 1 owner * original ONLY 342,745 km * Condition, see photos * TÜV until 12/2025 * PalfingerTelescopic unwinder type T20 * Loading crane from premium manufacturer Palfinger type EPSILON M120L97 * Lifts at 4m = 2,790kg - 5m = 2,210kg - 6m = 1,820kg - 7m = 1,550kg - 8m = 1,330kg 9m = 1,180kg * 5 + 6 control circuits * Radio remote control * Hook height 11.5m * Lifting control * 2 hydraulic supports * Pneumatic locking * Underrun protection pneumatically adjustable * Maneuvering coupling at the rear * Steerable trailing lifting axle + raising/lowering * Storage box * CB radio Hodevxk Dfspfx Ab Nonl * Driver's cab with 2 air-sprung comfort seats * Rear view camera * Auxiliary heating * Hill start assist * Radio CD * Automatic transmission * Air conditioning * Electric windows * Electric mirrors, heated * Electric engine brake * Rotating beacons * Work lights * Additional lights * Roof hatch * Sun protection * Wheelbase 4.30 m + 1.40 m * GVW 26,000 kg * Empty weight 13,830 kg * Payload 12,170 kg * Palfinger multi-shell grab available for an additional charge If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: excellent (used), functionality: fully functional, power: 85 kW (115.57 HP), fuel type: diesel, Year of construction: 2017, operating hours: 11,906 h, Atlas Weyhausen AR95 e/Articulated Joint/Bucket • Manufacturer: Atlas Weyhausen • Model: AR 95 e • Year of manufacture: 2017 • Operating hours: 11,906 h • Power: 85 kW / 115 HP Hnjdpfeym Sdmox Ab Njl • Engine: Deutz 4-cylinder diesel • Hydrostatic drive • Differential lock • Ventilation system • Articulated steering • Bucket: 2.35 m wide × 95 cm deep • Heating • Total weight: 7,900 kg • Documentation • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Intermediate sale reserved - Errors and/or typing mistakes excepted - Sale according to our terms and conditions.

Condition: used, mileage: 357,245 km, power: 210 kW (285.52 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 10,615 kg, maximum load weight: 7,355 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,850 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 4,000 mm, loading space width: 2,400 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, crane, fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, trailer coupling, * German vehicle * 1st hand * original ONLY 357,245 km * Condition, see photos * Complete documentation & inspection book available * 4x4 all-wheel drive * Atlas crane foldable behind the driver's cab * Type: TLC 65.2-A 1L * Radio remote control * Floor control * Lifts at: 1.9m = 3,100kg - 3.7m = 1,700kg - 5.4m = 1,120kg - 7.2m = 780kg * Hook height 9 m * 5th & 6th control circuit * 2 hydraulic supports * Meiller 3-way tipper * L=4,000 x W=2,400 x H=600 mm * DIN lashing eyes * Trailer coupling * Trailer load: 24,000 kg * Trailer hydraulics * Municipal plate * Municipal hydraulics * Schmidt municipal control * Winter service lighting * 8-speed manual transmission * Air conditioning * Rear wall of driver's cab with window * Electric windows * Electric mirrors, heated * Heated windscreen * Comfort driver's seat, air-suspended * Seat heating * Radio CD * Rotating beacons * Differential lock * ABS (anti-lock braking system) * Leaf spring suspension * Roof hatch * Fog lights * Raised exhaust system * Sun visor * Work lights * Wheelbase: 3,850 mm * GVW: 18,000 kg * Empty weight 10,615 kg * Payload: 7,385 kg * Snow blade and salt spreader available for an additional charge * Grabber available for an additional charge If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   Hjdpfxev Azw Ds Ab Nonl All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, Year of construction: 2013, functionality: fully functional, conveyor belt length: 2,560 mm, conveyor belt width: 680 mm, total length: 2,560 mm, power: 37 kW (50.31 HP), motor manufacturer: SEW Eurodrive, Belt Conveyor / Conveyor Belt / Belt Band Color: Light Grey Year of Manufacture: 2013 Manufacturer: AMI Fördertechnik Condition: Used Model: Belt/ KGF 65 Total Length: approx. 2560 mm Overall Width incl. motor: approx. 680 mm Overall Width without motor: approx. 620 mm Belt Width: approx. 590 mm Belt Type: Longitudinal Grooves Frame Material: Aluminium Frame Height: approx. 70 mm Including SEW Motor (0.37 kW) In Stock: 6 units Price per unit Collection Address: Industriestraße 5 (47918 Tönisvorst) Internal Article Number: 2026032602 The conveyor system was in operation until it was dismantled. Thanks to the excellent workmanship of this conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for the loading and unloading of your goods, we are your competent partner! We are happy to provide you with a bespoke quotation or advise you on design or installation matters. Just let us know your requirements and local conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Hedpfx Ajyxf Nhsb Nonl Together we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable way. We can also offer fully automated sorting systems or supplementary components such as order picking racks or containers.

Condition: excellent (used), functionality: fully functional, 12 x Mettler-Toledo GmbH 6 kg platform scale. Model - BBA449check+-A6. Hnedpfxsy Hkzxo Ab Nol Maximum weighing capacity - 6 kg.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2003, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 8,050 mm, total width: 2,450 mm, suspension: air, tire size: 385/65-R252.5, wheelbase: 5,780 mm, Year of construction: 2003, Equipment: ABS, = Additional options and equipment = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Notes = Very nice 2003 BURG 20FT ADR swap body chassis with ABS/EBS, SAF axles with disc brakes (INTRADISC), ADR approval (EXII, EXIII, FL, OX, AT), 1st axle = lift axle, 1x20FT, unladen weight: 3,290 kg, permissible total weight: 39,000 kg, tyres: 385/65-R22.5 (left tread: 7/10/15 mm; right tread: 13/6/15 mm), Dutch registration = Further information = Axle configuration Tyre size: 385/65-R22.5 Axle manufacturer: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 80% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 40% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 95%; Tyre tread right: 95% Weights Unladen weight: 3,290 kg Payload: 35,710 kg Gross vehicle weight: 39,000 kg Functional Body make: BURG BPO 12-27 CCXAX Condition Technical condition: very good Visual condition: very good Identification Registration number: OH-34-FN Further information Hjdpfx Ajy H Dzljb Nenl Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2003, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 8,050 mm, total width: 2,450 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 5,780 mm, Year of construction: 2003, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Remarks = Very nice 2003 BURG 20FT ADR swap chassis with ABS/EBS, SAF axles with disc brakes (INTRADISC), ADR certification (EXII, EXIII, FL, OX, AT), 1st axle = lift axle, 1x20FT, unladen weight: 3,290 kg, permissible total weight: 39,000 kg, tires: 385/65-R22.5 (tread left: 7/10/15 mm; tread right: 13/6/15 mm), Dutch registration. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 95% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 75%; Tire tread right: 50% Hnodpfxjy H Dwts Ab Nsl Weights Unladen weight: 3,290 kg Payload: 35,710 kg Gross vehicle weight: 39,000 kg Functional Body make: BURG BPO 12-27 CCXAX Condition Technical condition: very good Visual condition: very good Identification Registration number: OH-10-FS Further Information Please contact Arne Honingh for more information.

Condition: used, axle configuration: 3 axles, loading space length: 135,000 mm, loading space width: 24,900 mm, loading space height: 22,220 mm, total width: 26,000 mm, total height: 39,300 mm, Year of construction: 2015, Equipment: ABS, = Additional Options and Equipment = - EBS - Electronic Braking System - Air suspension rear - Air suspension front = Remarks = For vehicle inquiries, please contact Mr. Seidel (by telephone). RSK/35IV Refrigerated Trailer Cooling unit: Carrier Vector 1950, Tail lift: Palfinger MBB C 2500 SD (2,500 kg), 3rd axle steered, 1st and 2nd axles liftable, additional side marker lights on left, right, and at the rear, air suspension, Duomatic coupling system, Mercedes-Benz axles, Wabco ABS, disc brakes, spring-loaded brakes, cargo area dimensions: Length: 13,500 mm, Width: 2,490 mm, Height: 2,220 mm, tire tread depth: 1st axle 10-13 mm, 2nd axle 10-11 mm, 3rd axle 12 mm, permissible total weight: 35,000 kg, unladen weight: 10,790 kg, payload: 24,210 kg On request, we will be glad to provide a leasing or financing offer. Mr. Seidel (by telephone) will be happy to assist you. For more information, please visit our website. ... Subject to errors, changes, and prior sale!!! - Steering axle = Further Information = Unladen weight: 10,790 kg Payload: 24,210 kg Gross Vehicle Weight: 35,000 kg Contact Tobias Ebert for further details. Hnsdpfsy Ivrljx Ab Nsl

Year of construction: 2015, condition: used, Waste water neutralisation Capacity: 8 m3/h Operation / Control: Control cabinet with touch-screen display / WAGO Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet Hnjdoxbqr Dopfx Ab Nol

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Hnodpfxovcqy Uj Ab Nol Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: used, mileage: 960,000 km, power: 213 kW (289.60 HP), first registration: 02/2010, fuel type: diesel, overall weight: 15,000 kg, emission class: euro5, Equipment: ABS, air conditioning, tail-lift, MAN TGM 15.290 First registration: km Euro 5 Air conditioning Air suspension Body Menke Jenzen also year 2010 Payload 7,750 kg Body length approx. 6.5 m Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation options - Transfer from Munich airport or Passau train station We are happy to assist with your financing or leasing. Hnodjy Nvdqopfx Ab Nol Sale EU: net after presentation of company documents and VAT number VAT deposit €2,000

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Hnsdpju Tha Iofx Ab Nol Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: Hsdpfxju Thh Eo Ab Nonl The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. Hodpfxjng Exao Ab Nsnl The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Hnjdpfondn Agjx Ab Nsl Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional Hnedpfxsnh R Eko Ab Njl OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Hnedpfxenfvx Nj Ab Nel Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Hodpfx Abondk N Ae Nonl Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction Hedpfx Asnfvy Ueb Nsnl TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction Hodpfx Asng Amkeb Nenl TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius Hjdeng A R Sspfx Ab Njnl - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site