Used Carlo Salvi Rivet Header for sale (281)

Condition: good (used), Hello, -The subject of sale is. -Hang 87D 3P double-head riveter. -Manufacturer: Hang Germany. -Good condition. -The machine is used to rivet eyelets. -Two riveting heads, with adjustable spacing. -Cardboard thickness 0.2-4mm -Weight 570kg Psdpfx Ajv I E Scsirogt -380V power supply -Possible transport by freight forwarder (individual valuation)

Condition: used, Year of construction: 2004, functionality: fully functional, HEIDELBERG ST100.2 STITCHING MACHINE Pedpfx Aszr Haleirogt Year 2004, second-hand, in excellent condition, cleaned and checked composed by 6 sheet feeders + cover feeder stitching station with 2 heads trilateral (trimmer) controls for signature pick-up and spine length OPTIONAL: double centre-cut

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M06I/9048, Offer Number: M06I/9048 Machinetype: rotating 3 - die header Make: HILGELAND Pjdexcxzpspfx Airsgt Type: HC5-40A Constr. year: 1990 diameter range: 6 mm shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 600 Location: Germany

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: M12L/8752, Offer Number: M12L/8752 Machinetype: single blow header Psdpowi Tmpjfx Airegt Make: HILGELAND Type: HE7-120 Constr. year: 1991 diameter range: 2-7 mm shaft length under head: 120 mm cutting length: 140 mm output - pieces/min: 300 Location: In our warehouse

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: M08L/8464, Offer Number: M08L/8464 Machinetype: 2 die - 3 blow transfer header Info: PKO Make: OMEGA Type: 123G Constr. year: 1995 diameter range: 3-8,5mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 60 mm Psdewi Sz Eopfx Airjgt shaft length under head: 55 mm output - pieces/min: 250 Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M06L/8699, Offer Number: M06L/8699 Machinetype: double blow header Info: bushing cut-off Make: NATIONAL FORMAX Type: FXH1M Constr. year: 1990 diameter range: 5 mm cutting length: 50 mm Pjdpfewi Svvex Airogt shaft length under head: 40 mm output - pieces/min: 450 Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M06L/9048, Offer Number: M06L/9048 Machinetype: rotating 3 - die header Make: HILGELAND Type: HC5-40A Podpfx Aew Nxqljirsgt Constr. year: 1990 diameter range: 6 mm shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 600 Location: In our warehouse

Year of construction: 2020, condition: ready for operation (used), A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. sewing speed: approx. 5000stitches/min, max. stitch length: approx. 5mm, needle bar stroke: approx. 30.7mm. 5) Single-needle high-speed lockstitch machine Dürkopp Adler 261-140342-02, max. stitch length: approx. 5mm, control: AHE59. 6) Post-bed sewing machine Pfaff 591-900/81-BL. 7) 2x identical swing-arm cutting presses Moneus 1333. 8) 5-thread overlock machine Chee Siang Golden Wheel CSK-2516D-03/S35-3x5. 9) Manually operated riveting and setting machine with mechanical foot operation. 10) Rotary screw compressor Kaeser Aircenter SM 13, year of manufacture: 2020, motor power: 7.5kW, max. operating pressure: 11bar, motor speed: 2955rpm, control: Kaeser SIGMA CONTROL 2. Documentation available. Inspection possible by appointment. Pgsdpfszt Skxjx Airet

Condition: used, Oscillating head riveting machine BODMER KÜSNACHT Type FMK 3 Year of manufacture approx. 1980 Riveting shank diameter: max. 10 mm Tool diameter: 12 mm Riveting head stroke: 40 mm Riveting spindle speed: approx. 1400 rpm Motor power: 0.37 kW Power connection: 380 volts, 50 Hz - Riveting pressure adjustment via hydraulic pressure, stepless Pedpfx Ajglarloirjgt - Micrometer stop for stroke limitation - Stroke movement via oil hydraulics (max. 45 bar) - Machined flange surface Ø 115 mm with mounting nut on the housing Overall length: approx. 800 mm Weight: approx. 40 kg Good condition The riveting head has a multi-spindle head for setting 2 or 3 rivets simultaneously. However, this can be removed and used as a normal head. For normal use, however, the standard oscillating head, which holds the tool, is missing.

Year of construction: 2023, condition: excellent (used), Industrial Plankton PBR 1250L – Turnkey Photobioreactor for Microalgae Cultivation Complete, ready-to-run closed photobioreactor for cultivating microalgae (e.g. Nannochloropsis, Spirulina, Chlorella, Isochrysis, Tetraselmis, Haematococcus and more). Manufactured by Industrial Plankton Inc. (Canada). In service since spring 2023, well-maintained and fully operational. Offered as a complete turnkey package. Pgedpfx Aozluy Hoiret Built around a custom 1250 L high-surface-area vessel (1200 L working volume) with algal-spectrum LED lighting and a touchscreen PLC that automates light, pH, CO2, temperature, nutrient dosing and harvesting – with remote access. Highlights: Easy to run and keep clean: touchscreen automation + integrated clean-in-place (CIP), no manual scrubbing Compact footprint: full 1250 L capacity in a compact vertical unit (working area approx. 3.05 x 2.44 m) Strong, controllable growth performance for high-density cultivation Continuous production approx. 200-500 L/day; 100-300 g biomass/day (AFDW) at 0.3-1.2 g/L Broad strain range (freshwater & marine) Key specifications: Total / working volume: 1250 L / 1200 L LED lighting: algal-spectrum, 2160 W Control: touchscreen HMI + PLC, real-time density sensor, remote access pH / CO2: probe & transmitter, automated CO2 dosing valve & regulator Temperature: heat exchanger, 5000 BTU chiller, 300 W heater Nutrient dosing: 3 pumps (1 mL/s), 2 filters (0.2 um) Flow/harvest: 0.1 um water filter, in-tank volume sensor, harvest pump (6 L/min) Header tank: 250 L with UV filter, ultrafilter & supply pump Power: approx. 3160 W avg / 4170 W max; 110-120 / 220-240 V, 50/60 Hz Operational weight: approx. 2130 kg Condition: good working order, well-maintained. CO2 cylinder not included. Exact scope confirmed on inspection. Location: Lahti, Finland (EU). Inspection and live demonstration by appointment. As part of the sale we are happy to advise the new owner on the best starting species and share reference data to get running. Full illustrated PDF spec sheet available on request.

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication Pgsdpfx Aieu Icxqsret - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) Pgedpfx Aotqu U Tsirot One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Trimming machine

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Podpfx Ajzunvaoirogt Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,706 h, power: 366 kW (497.62 HP), gearing type: hydrostat, fuel type: diesel, maximum speed: 30 km/h, first registration: 07/2017, next inspection (TÜV): 07/2026, rear tire size: 500/85 R24, machine/vehicle number: YHG233775, Equipment: air conditioning, cabin, hydraulics, lighting, rape cutter, trailer coupling, On behalf of an authorized party, we are offering the following used item for sale: Case-IH combine harvester AF 7240 with ST rotor Chassis number: YHG233775 Longitudinally arranged ST rotor 30 km/h version 6-cylinder Power: 366 kW (497 hp) Front wheels: Track drive, sprung, 610mm Rear wheels: 500/85 R24 HID work light package AC FAN automatic fan speed adjustment Adjustable discharge spout Cross-flow transverse flow fan Hydraulic drive Redekop chopper Xtra Chop Accu Guide complete Steering on Egnos – retrofitted with existing RTK antenna LED work light package, 4 x rear, 1 x grain tank inlet Additional cameras Yield and moisture measurement Radio, two-way radio Last inspection before the 2025 harvest, approximately 300 ha Minor scorching above the tank, damaged cables have been repaired Header 9.15 m, Series 3050, steplessly adjustable Type: 306 Year: 2017 Serial number: 868112015 Hydrostatic reel drive Automatic adjustment of reel speed Reel horizontal adjustment Hydraulic multi-quick coupler Short stubble divider Hydraulic rapeseed knife Rabolon ear lifter Header wagon TAM Leguan quattro 30 Type: SWW 30FT VIN: WEGTP28F3HAAA3318 Year: 2018 2-axle 25 km/h LED lighting set Tires: 10.0/75-15.3 Price upon collection. Pjdpfx Aozabtdsirsgt The item is located in 49419 Wagenfeld-Ströhen and must be collected from there by the buyer. This offer refers exclusively to the described item. Other items that may be shown here are possibly part of a different offer. Errors and omissions excepted. Inventory number: 2926-26

Year of construction: 2017, condition: ready for operation (used), A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible. Podpozfp H Ijfx Airegt

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M08L/7516, Offer Number: M08L/7516 Machinetype: 4 die - 4 blow transfer header Make: PELTZER-EHLERS Type: GB1 Constr. year: 1970 diameter range: 12 mm Podpfjwi S Tnsx Airjgt number of dies: 4 number of stations: 5 cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 125 press power: 65 to Location: In our warehouse

Condition: used, Year of construction: 1959, functionality: fully functional, machine/vehicle number: M06L/7570, Offer Number: M06L/7570 Machinetype: double blow header Make: HILGELAND Type: CH1L Constr. year: 1959 diameter range: 3-6 mm shaft length under head: 6-60 mm Pgedpfjwi S S Dex Airjt max. cutting length: 75 mm output- piece/min: 180 Location: In our warehouse

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 102387, on rollers with foot switch Podpfxozvypbs Airegt eyelet size 3.5 mm with rivet tool Height: 128 cm Width: 120 cm with table, machine only 70 cm Depth: 78 cm

Condition: used, Nietmaschine / Riveting machine Hang 162-01 Baujahr / Year 1993  - SN. 39709 Arbeitstiefe (Ausladung) / Working depth (projection) 620mm Taktzeit / Cycle time 0,7sec Niethub / Rivet stroke 55mm Arbeitshöhe / Working height 1100mm Nietschaftsdurchmesser / Rivet Diameter 2-4mm Antriebsleistung / Drive capacity 0,37 kW Geeignet für Verarbeitung von Halbhohlniete, Vollniete, Hohlniete, Rohrniete, Zweispitzniete, Doppelhohlniete (Zuführung des Nietkäppchens), Nietmaschine für mittlere bis große Serien Suitable for processing semi-tubular rivets, solid rivets, hollow rivets, tubular rivets, two-point rivets, double-tubular rivets (feed of the rivet cap), riveting machine for medium to large series Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Podpfsv D H Htox Airjgt

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Pjdpfx Aiox Nd U Djrsgt

Condition: used, mileage: 230,000 km, power: 85 kW (115.57 HP), first registration: 03/2008, fuel type: diesel, maximum load weight: 1,200 kg, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro4, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Year of construction: 2008, - Used FORD TRANSIT 350 truck - 35 quintals (approximately 7,700 lbs) maximum payload, twin rear wheels, registered in 2008, 2400TD 115hp Euro 4 engine, 6-speed gearbox, 230,000 km. - Fixed cargo box with aluminum side rails and external dimensions of 3600 x 2100 mm, marine plywood floor - Sideboards and sliding tarpaulin on all three sides, 2100 mm high - Equipped with air conditioning, ABS, radio-CD, electric windows, driver's airbag, spare wheel, and two keys. - Bodywork in good condition, interior in good order, mechanically sound and in good running condition, front and rear tires at 80%. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM; Saturday: 8:30 AM / 12:30 PM - 2:00 PM / 5:00 PM. - Certified mileage. - Test drive possible by appointment. - Transfer of ownership can be arranged on-site. - Customized financing options available. Carlo Mauri S.r.l. disclaims all responsibility for any unintentional inaccuracies in this advertisement, which does not constitute a contractual commitment. Prices shown exclude VAT and transfer of ownership fees. Pgjdpfxjz Dn S Do Airjt

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Pgjdjl Smn Sspfx Airst Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 90 h, total height: 7,700 mm, installation height: 2,725 mm, ENERPAC SL400N hydraulic gantry system - SL400 2FT TRACK HYDRAULIC GANTRY, SET OF 4 LEGS - LL500 LIFTING LUGS 1250 KN EACH, 4 PCS - GST400-3 SKID TRACK / 2FT / LENGTH 3 METERS, 2 PCS - GST400-6 SKID TRACK / 2FT / LENGTH 6 METERS, 6 PCS - HBB10 HEADER BEAM BOX BEAM / LENGTH 10 METER 2PCS - HBB8 HEADER BEAM BOX BEAM / LENGTH 8 METER 2PCS - SSU600 SIDE SHIFT 1500 KN EACH / SET OF 4 INCL TP FRAME 4PCS *Self-contained hydraulic and electronic systems *Intelli-Lift wireless control system *Self-propelled wheels or tank rollers *Full range of supplementary equipment: header beams, lifting lugs, side shift units, skid tracks *Designed and tested in compliance with ASME B30.1-2015 safety standards *Lloyd’s witnessed testing at 125% of maximum working load Psdpfeylccqox Airegt like new, only 90 working hours

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: M08L/8421, Offer Number: M08L/8421 Machinetype: 4 die - 4 blow transfer header Psdpfx Aewi S Dgjirogt Info: bushing cut-off , PKO , IFO Make: MALMEDIE Type: QPB161 Constr. year: 1972 diameter range: 10-26 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 220 mm shaft length under head: 165 mm output - pieces/min: 35-70 press power: 380 to Location: In our warehouse

Condition: like new (used), Year of construction: 2005, functionality: fully functional, FOLDER STAHL TI 40/43 COMBI Pjdoy R Sv Sopfx Airjgt Year 2005/2002 Condition: as new