Used Cattle Hide Remover for sale (4,511)

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. Dwedjz Iww Repfx Akmsc We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: used, functionality: fully functional, W-KRONEN HP10 LT500 compressed air compressor with integrated Aerotec compressed air refrigerant dryer Aerodry PRO 1000 Dwjdez Iykyjpfx Akmjc For sale is a W-KRONEN HP10 LT500 compressed air compressor with an integrated Aerotec compressed air refrigerant dryer Aerodry PRO 1000. This high-quality complete system provides reliable and efficient compressed air supply for workshops, craft businesses, and industrial applications. The integrated refrigerant dryer effectively removes condensate from the compressed air, reducing corrosion, moisture damage, and failures of compressed air tools. The powerful 10 HP motor, with an intake capacity of 1,100 l/min and a delivery rate of approximately 950 l/min, ensures sufficient compressed air even under demanding conditions. The 500-liter compressed air tank guarantees a high reserve capacity and a constant working pressure of up to 10 bar. Technical data • Tank volume: 500 liters • Max. operating pressure: 10 bar • Intake capacity: 1,100 l/min • Delivery rate: 950 l/min • Motor power: 7.5 kW / 10 HP • Speed: 1,200 RPM • Connection: 400 V / 50 Hz, 16 A • Integrated Aerotec refrigerant dryer Aerodry PRO 1000 • Compressed air treatment for dry and high-quality compressed air

Condition: used, Year of construction: 2020, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 Dwedpezw D Haefx Akmoc - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Condition: used, functionality: fully functional, machine/vehicle number: VAVKSK339SZ542526, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 06/2027, loading space length: 7,350 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 24 m³, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5", tire condition: 100 %, color: grey, Year of construction: 2025, The images are archive photographs; the vehicle may still be in use. #Chassis -Welded steel chassis construction with rear tipping axle in weight-optimised lightweight design -Replaceable 2" kingpin -Frame designed for an unladen fifth-wheel height of approx. 1200 mm – approx. 1250 mm with air-suspended tractor unit -Support legs: mechanical steel landing legs, 2 x 12 t, single-side operation (right) #Axles Dedpfozm Ipkox Akmewc -SAF-Intradisc-B9 axles with disc brakes / 430 mm -3 axles -Front axle automatically liftable = raises and lowers depending on load; also with forced lowering incl. integrated speed-limited start-off aid -Note: loading height/overall height increases by approx. 50 mm! #Electrics -15-pin socket: PIN 12 -7-pin socket: PIN 6 (positive-switched) #Wheels -6 tyres 385/65 R22.5", 6 aluminium wheels #Braking system / Suspension -Two-line air brake system -Brakes: Knorr make -EBS system -Brake/air connections with 2 single coupling heads, yellow/red -EBS/ABS socket, front -Electronic air suspension with automatic lowering device via induction switch and additional lowering lock-out via rotary switch on the semi-trailer -Without raising and lowering system -Without connecting hoses/cables to the towing vehicle #Assistance / Safety systems -Axle load display via EBS CAN bus signal, shown on the display in the cab -Tyre pressure monitoring with sensor in the wheels, shown on the display in the cab #Body -Steel body with reinforced floor plate made of special steel HB 450 (Hardox or comparable material) and reinforced top rail -Floor thickness 5 mm = continuous floor plate, wall thickness 4 mm -Front and rear walls sloped, flush all round at the top -Access steps inside the body, front left -Steel pivoting tailgate with recessed mounting and automatic mechanical 2-hook central locking, tailgate with internal discharge chute #Hydraulics -Without hydraulic connecting lines to the tractor unit -High-pressure front hoist for rear tipping #Tarpaulin -Plastic roller tarpaulin incl. aluminium tube with hand crank, without customs seal -1 removable cross support and stop bracket on the right for the roller tarpaulin -Locking device for the rolled-up tarpaulin -Tarpaulin fastening on the left (direction of travel) with 3 mounting brackets and central tensioning device at the front, without tensioning straps (quick-release fastener on the top rail); tarpaulin colour similar to RAL 9006 white aluminium #Lighting / Electrics -24-volt lighting system -2 full-LED multi-chamber rear lights -2 LED position lights, front -2 LED outline marker lights, rear -Flashing LED side marker lights -2 LED number plate lights -2 x 7-pin sockets -1 x 15-pin socket -Without electrical connecting cables to the tractor unit #Accessories / General -3 pairs of plastic individual-wheel mudguards, without spray suppression, foldable mud flaps at the rear -Folding aluminium trapezoidal rear underrun protection, unpainted with steel bracket, in accordance with EU directive -2 wheel chocks -1 tow hook bolted to the frame member, on the right (direction of travel) -Noise dampers = rubber pads -Steel standing platform with aluminium safety grating, guard rail and foldable access ladder on the left (direction of travel), bolted to the chassis frame at the front -Without side impact protection Please note: archive photographs

Condition: good (used), Year of construction: 2014, functionality: fully functional, DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 560 mm Control system: Siemens 840D sl Main spindle: Speed range – main spindle: 20 – 10,000 min/-1 Drive power – main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load: Swiveling range / Rotational range T-slots: 600 B: +/- 120 C: 360 Max. workpiece dimensions: 650 (840) x 500 mm Dedpfx Aksz Ix Uqjmowc Tool magazine: Number of tool positions: 30 Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free neighboring position: 160 mm Max. workpiece length: 315 mm Tool change time (tool to tool): 1.6 sec Chip removal time: 8.0 sec Feeds: Rapid traverse: 40 m/min Feed force: 7/13/10 kN Feed rate: 1 – 40,000 mm/min Total power consumption: 24 kVA Machine weight: approx. 11.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Documentation Coolant system Electrical handwheel Laser head: 100 watts Laser operating hours: 6177 h / 2802 h Machine operating hours: 18703 h / 4738 h

Condition: new, power: 40 kW (54.38 HP), travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, workpiece weight (max.): 10,000 kg, number of slots in tool magazine: 60, controller manufacturer: HEIDENHAIN, Equipment: CE marking, The LAGUN TM 3 is a highly stable, T-shaped machining center with a large rotary table and a large working envelope. It offers maximum flexibility and is ideal for the precise machining of large and complex workpieces. Its advantages at a glance: Dwodohy Aunspfx Akmsc ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ 24-month warranty Technical specifications: Control system: ✔ HEIDENHAIN TNC 7 digital control system ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position chain magazine with dual gripper Chip removal: 2 x hinged belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positional accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare an individual offer.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 22,100 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, total length: 10,900 mm, total width: 2,550 mm, total height: 860 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Equipment: center pivot plate, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Heavy-duty welded steel low-loader turntable trailer with robust ball-bearing turntable. Folding rear support. Aluminium side underrun protection. Full-width rear mud flap. Quarter mudguards in front of the 1st axle. Extendable loading platform up to 3,000 mm. Integrated storage compartment for timber extension beams. 70 mm timber extension planks included. Two pairs of recessed wheel wells: Front wheel wells behind the gooseneck, approx. 1,600 mm long and 400 mm deep. Rear wheel wells between the axles, approx. 600 mm long and 300 mm deep. Removable steel covers for wheel wells. Main frame spacing approx. 1,280 mm in wheel well area. Lashing Equipment 1 pair of 10 t lashing cut-outs in the gooseneck 4 pairs of 5 t lashing holes in the outer gooseneck frame 7 pairs of recessed 10 t lashing mushrooms Lashing point spacing max. 1,100 mm Recessed stake pockets (70 × 40 mm), convertible to 5 t lashing rings Additional 10 t folding lashing rings on the gooseneck and rear beavertail Drawbar Dwedpfxezl Uv Uj Akmsc Height-adjustable drawbar with certified 40 mm towing eye. Axles & Suspension SAF drum brake axles Laser-aligned axle/suspension geometry for reduced tyre wear and fuel consumption Air suspension with raise/lower valve Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver Braking System Dual-line air brake system Spring parking brake Electronic Stability Program (ESP) Axle load indication via EBS CAN bus Front air couplings with connecting lines Parking sockets for ABS/EBS and air connections 24 V EBS with front connector Trailer Info Module displaying axle loads, mileage and diagnostic data Electrical System 24 V full LED lighting LED side marker lights LED number plate light LED front position lights LED rear outline marker lights Parking sockets for electrical connections Extendable illuminated LED warning boards up to 3,000 mm Loading Platform Steel chequer plate on gooseneck Integrated storage box in transition area Approx. 70 mm timber floor Steel chequer plate over wheel wells Rear beavertail with 70 mm timber decking Total low-bed deck length incl. beavertail: 6,500 mm Loading Ramps Hydraulic steel loading ramps Length: 3,000 mm Width: 750 mm Side-adjustable Foldable lower ramp locking system Mega Grip serrated grating surface with chequer plate ramp tips Hydraulic operation via tractor PTO with flow restrictor Hydraulic connection with SVK coupling (NW 10/3)

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle speed (max.): 6,000 rpm, table length: 2,195 mm, table width: 2,195 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, The LAGUN TL 4 is a highly stable, T-shaped milling center with a large rotary table and a large working envelope. It offers maximum flexibility and is ideal for the precise machining of large and complex workpieces. Its advantages: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24 months warranty Technical features: Dwjdpfxeq I Nlye Akmoc Control system: • HEIDENHAIN TNC 7 digital control • HEIDENHAIN 24" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position drum magazine with dual gripper Chip removal: Double-hinge belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare an individual offer for you.

Condition: new, maximum load weight: 1,975 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,850 mm, loading space height: 2,150 mm, total length: 4,488 mm, total width: 1,913 mm, total height: 2,150 mm, Year of construction: 2026, Humbaur HT 25 31 18 with cover and bow, LH1500 and steel grating superstructure 620 mm Price - €5,950 incl. 19% VAT, cover and bow, steel grating superstructure, incl. 6.4% delivery fee and vehicle documents. Description: Everything a professional needs: A sturdy high-sided trailer with a fully hot-dip galvanized frame and chassis. All important components, such as the longitudinal beams or the underrun protection, are also protected against corrosion, and the drawbar can be easily replaced if damage occurs during demanding daily work. Recessed lashing rings secure the load. Each one can withstand a tensile force of up to 400 kg, as tested by DEKRA. The robust side panels are made of anodized aluminum with recessed fasteners and, like the hot-dip galvanized corner posts, are completely removable. Technical data: * Extended drawbar * Trailer type - Twin axle * Construction type - Aluminum * Weight - 525 kg * Gross vehicle weight - 2500 kg * Payload - 1975 kg * Internal length - 3100 mm * Overall length - 4488 mm * Internal width - 1850 mm * Overall width - 1913 mm * Internal height - 350 mm incl. cover 1850 mm, or with steel grating superstructure 970 mm * Overall height - 1110 mm incl. cover 2610 mm * Loading height - 735 mm * Tire size - 15 inches Standard equipment: V-shaped drawbar, hot-dip galvanized * 13-pin plug and reversing light * 18 mm thick floor panel * Side panels made of anodized aluminum with recessed fasteners, completely removable Dodpfxezphqtj Akmjwc * Lashing rings integrated into the V-shaped outer frame profile, tensile force 400 kg per lashing ring, DEKRA tested * Support wheel

Condition: used, maximum load weight: 37,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the near future, on our website. Dwjdpfx Ajz N Nwyekmec Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, approximately 30 mm thick. Load platform in extendable design: Load platform in extendable design with rear bevel of approximately 1,000 mm x 8°. 6 pairs of lashing rings that fold outwards (LC 5,000 daN) 3 pairs of lashing rings that fold outwards (LC 10,000 daN) 1 pair of lashing rings located horizontally at the front of the load platform (LC 10,000 daN) Recesses in the outer frame of the load platform for attaching lashing straps (LC 2,000 daN) Hardwood flooring, approximately 48 mm thick; diamond plate flooring over the axles. Kingpin: JOST kingpins (mechanical) with 2-speed gear for approximately 24 tons lifting capacity (approximately 50 tons test load) Tires: Tires 235/75 R 17.5 3PMSF TPMS: TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles: BPW axles and suspension, 2 fixed axles, 1 steered axle. Technical axle load: 12,000 kg each. Electro-magnetic parking brake activated via reverse gear and manually. Air suspension with raising and lowering valve. Axle tool. Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the semi-trailer tractor. Steel construction: Steel construction made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red, in accordance with the RAL 841GL system. Rims in silver gray. Rear section metallic and painted in RAL 9010 (pure white). Paint structure tested in the salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pole sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098. Included accessories: 2-inch Kingpin One galvanized steel front panel, approximately 400 mm high. One spare wheel holder in front of the front panel. Yellow-red air couplings on the galvanized connection bar at the front. Mounting in the rear area of the gooseneck for aluminum approach ramps. Galvanized folding supports under the bevel of the load platform. On the gooseneck and on the rear panel, one holder each on the left and right for warning signs including socket. Load measuring device for determining the axle loads including load diagram. On the gooseneck, aluminum side walls and rear wall, pluggable, approximately 2,440 x 400 mm (L x H). The rear galvanized locking stakes are removable (overall length approximately 2,560 mm). One galvanized toolbox, integrated in the beveled gooseneck. 3 pairs of WADER container pockets in the load platf

Condition: used, mileage: 31,000 km, power: 150 kW (203.94 HP), first registration: 01/2023, fuel type: diesel, color: silver, gearing type: automatic, emission class: euro6, number of seats: 7, total length: 4,904 mm, total width: 1,904 mm, total height: 1,970 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, * Electrically adjustable and heated exterior mirrors * 3-zone "Air Care Climatronic" air conditioning system with additional controls in the passenger compartment * Heated seats for driver and front passenger seats, adjustable separately * Height adjustment for the driver's side individual seat * Multifunction leather steering wheel (3 spokes) * Auxiliary heater for cab and cargo area with remote control and fuel-operated auxiliary heating * 2 USB ports (Type C) in the dashboard * 6 speakers: 2 tweeters, 2 woofers, 2 full-range speakers * Digital Cockpit * Digital radio reception (DAB+) * Mobile phone interface * Wired & Wireless App-Connect * "Discover Media" navigation system with 20.3 cm (8 inch) touch color display including "Streaming and Internet" * Voice control * Hill start assist * Airbags for driver and front passenger, with front passenger airbag deactivation * Electronic Stability Program, ABS, ASR (with deactivation button), EDS, hill start assist and brake assist * "Light Assist" high beam control * Anti-theft alarm system with interior monitoring, backup horn and towing protection * Electromechanical power steering, speed-dependent, adjustable steering column in height and length * Start-stop system with brake energy regeneration * Automatic anti-dazzle interior mirror * Driver fatigue detection Dwsdpfxjwaqdaj Akmjc * Emergency call system eCall * Cruise control system including speed limiter * ParkPilot in the front and rear * "Rear View" reversing camera (static lines) * Side and curtain airbags for driver and front passenger * Rear window with heat-insulating glass, heated, and rear window wiper/washer system * Windshield wiper intermittent control with rain sensor for the windshield wipers * Side wind assist * 12-volt socket(s) * 17" chassis with 17" disc brakes in the front and 16" disc brakes in the rear * 2 12-volt sockets in the dashboard * 2 remote control folding keys * 2-seater bench seat on the left, backrest can be folded down with armrest on the aisle side, in the 2nd row of seats * 3-seater bench seat, foldable and rotating, in the 3rd row of seats (not usable in the 4th row with modular seat mounting system) * 4 light alloy wheels "Aracaju" 7J x 17, in black, with a polished surface * 4-cylinder turbo diesel engine 2.0 L / 150 kW (4V) TDI * 4-cylinder diesel engine 2.0L Agg. 03N.G * 7-speed automatic transmission including coasting function * 7-seater package = 2-2-3 * Emission standard Euro 6d ISC-FCM * Acoustic package extra * Dashboard comfort (lower part in palladium) with chrome applications and black painted trim * Armrests for the driver's side seat * Convex exterior mirrors on the left and right * Caravelle Highline * Acoustic laminated glass package with tinted windows in the passenger compartment * Trailer hitch, removable/lockable (including trailer stabilization) * Anti-theft alarm system with interior monitoring, backup horn and towing protection * Three-point automatic safety belts, height-adjustable on the outer seats in the cab, with electric belt tensioners * Electrical connection block and function control unit 1 with ABH programming * Suspension and damping, reinforced * Child safety lock, electrically operated * ISOFIX child seat anchor and Top Tether for transporter/Caravelle in the 2nd row of seats * Comfort headliner in the cab and air circulation headliner with roof outlets in the passenger compartment * Lumbar support for the driver's side individual seat in the 1st row of seats (electrically adjustab

Condition: like new (used), The NBS Mini QuickSchnitt vertical slicing machine is ideal for vertical cutting cake on baking trays. The slicing machine has a manual operation and is suitable for a 600x400 mm baking tray. The knife is quickly removable, making it easy to clean. Dodpfehimluex Akmjwc

Year of construction: 2021, condition: used, Removes oil from your compressor condensate The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away. The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor. Located in Emmeloord, the Netherlands. Immediately available, price on request. Dedpfx Aez Ndazokmswc More photos and full specifications: / Type: Oil-water separator for compressor condensate Filtration: Oil filter and activated carbon filter Weight: 6.8 kg (empty)

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following application: Diffusion welding machine for manufacturing the connection between the armature lead and the commutator for starter armatures by means of diffusion welding. Diffusion welding machine (also known as polymer diffusion welding machine, diffusion welding, copper soft-soldering machine, copper band welding machine), consisting of a main machine and control system, "PLC control, touchscreen operation". Process description: The workpiece carrier enters the station and is lifted. The alignment gripper takes the armature from the workpiece carrier and aligns it to the welding position. The loading gripper takes over the armature and inserts it into the welding chuck. The welding chuck moves with the armature to the welding position. The contact and welding cylinder move together, and the first welding process takes place. This process is repeated until the armature is completely welded. The welding chuck moves with the armature to the transfer position, and the unloading gripper takes over the armature and places it on the lifted workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with I0 armatures continue on the conveyor system; I0 armatures are conveyed to the removal conveyor. Technical data: Manufacturer: Gatek Designation: Diffusion Welding Machine Energy data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse rating: 35 A Water: Inlet 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of manufacture: 2016 Dwedpfxeg Icfps Akmjc You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, IKA LR 2000 V Laboratory Reactor For sale is a professional, modular IKA LR 2000 V laboratory reactor system in immediately operational condition. This configuration is the ideal workhorse for product development, simulation, and small-scale production (e.g., in the fields of cosmetics, pharmaceuticals, chemistry, or food technology). Thanks to its vacuum capability and the combination of an anchor stirrer and a high-performance disperser, the system is perfectly suited for the production of stable emulsions, creams, and lotions. Here you receive a complete, ready-to-use system. The expensive double-walled glass vessel with a bottom outlet, the heating bath with a temperature sensor, and the Ultra-Turrax T25 including shaft are already included in the package. You save yourself the trouble and the cost of purchasing individual components, which would amount to thousands of euros! Scope of delivery & technical components: Reactor vessel: Double-walled 2.0-liter vessel made of high-quality borosilicate glass 3.3. The jacket enables precise heating and cooling via external thermostats. Equipped with a practical bottom outlet valve for clean emptying. Mixing tools: Integrated anchor stirrer for optimal removal of material from the vessel walls when processing viscous substances, as well as a suitable flow breaker to prevent vortex formation and ensure perfect vertical mixing. Dispersing unit: Dsdpez I Szwofx Akmowc IKA ULTRA-TURRAX T25 including a suitable dispersing shaft. Enables highly effective homogenization and comminution directly during reactor operation. Drive & control: Robust IKA control unit RE 162 P for powerful stirring even at low speeds. Temperature control: Water bath LT5 control including an external temperature sensor. The sensor measures the temperature directly inside the reactor medium, which enables highly precise control via the water bath. Accessories: Complete stand system for the secure mounting of all components, as well as all necessary holders. Note: The sale does not include software for controlling the system. The system can be fully, independently, and easily controlled directly via the hardware controls. "All from one source: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2026, condition: new, The ProFruit UNLOADER 500 is a hydraulic bin tipper for lifting and emptying fruit, vegetable and berry bins into washing, sorting, crushing or conveying equipment. Operation The bin is positioned inside the tipping cradle. The hydraulic system raises and rotates the cradle, discharging the product directly into the receiving machine or conveyor. An enclosed cradle with high side walls guides the product and supports the bin during tipping. Operation is controlled by separate Start, Stop and emergency-stop buttons together with a manual UP/DOWN lever. Key features • Hydraulic lifting and tipping system • Enclosed tipping cradle for controlled discharge • Open front for convenient bin positioning and removal • Adjustable supporting feet • Suitable for integration into fruit and vegetable processing lines Technical specifications • Product types: fruit, vegetables and berries • Discharge applications: washing, sorting, crushing and conveying equipment Dsdpsz Ndy Ajfx Akmewc • Controls: Start, Stop, emergency stop and manual UP/DOWN lever • Construction: stainless steel Hygiene and cleaning The stainless-steel construction is suitable for food-processing environments, while the open-front design provides accessible bin handling around the tipping cradle.

Condition: used, Conveyorized chamber vacuum packaging machine for industrial food processing This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Conveyorized chamber vacuum packaging machine (belt) Output: 2–3 cycles per minute Sealing: Bi-active sealing bars, electronic temperature control, adjustable contact pressure Dwodpfxoz Nc Nne Akmec Trim removal: Perforation blade with bag waste suction on both sides (B-version) Vacuum control: Evacuation stops at the evaporation point Construction: Stainless steel, all-enclosed

Year of construction: 2026, condition: new, Motorised Tilting KETTLES Frying Pan with Scraper, tiltable, made entirely of stainless steel for food preparation, which can be unloaded onto trolleys by means of motorised tilting, maintaining the height of the unloading mouth It is manufactured with a double thermal oil bottom and an inner tank that is easy to clean by means of a removable remover with blades that rub against the walls to prevent the product from sticking and subsequent cleaning. It is double-sided with a total thermal insulation coating to save energy. Technical features: It has a control panel with electronic touch screen for programming, speed control and direction of rotation of the scrapers, frying temperature, frying time and recipe programme. Acoustic warning system at the end of the programme. Dodpog A Rhgofx Akmjwc Automatic emptying of the product by means of a button on the panel. Models SBE100A, SBE150A and SBE200A are fitted with castors. Stainless steel feet with height adjustment on models SBE300A and SBE500A. The electric models have armoured heating elements immersed in thermal oil that produce homogeneous heating throughout the frying pan. The gas models have very precise ventilated burners, electronically controlled, which can be LPG, NG or Diesel. Adjustable temperature from 50 to 210ºC. Recipe book on programmable electronic board. Capaciti 10, 24,50,100,150,200,300 y 500 L. Price from 4989€.

Condition: good (used), devapo hotAir Midi 12 convection oven The hotAir convection ovens from Devapo were specifically developed for warming and baking food/ingredients and for bake-off products. This model features a highly functional and user-friendly control system. Two operating steps (selection of the desired preparation time and temperature) ensure a guaranteed and consistent end product. Included: hotAir grid Optical hard-coated display with LED lighting Dwodsi Ey T Iopfx Akmoc On/Off/Open switch Stepless temperature control dials End-of-cycle signal Advanced Airflow System Rotary knob Tilt protection Special thermal insulation Robust, certified construction Service-friendly control cabinet Removable ventilation plate Completely made of stainless steel Self-ventilating door Electrical connection values: 230 VAC Capacity, single-portion tray 225 x 175 x 35 mm / 250 x 190 x 45 mm: 12 pieces Capacity, portion trays 160 x 115 x 30 mm: 24 pieces Dimensions: 680 mm x 490 mm x 549 mm (W x D x H) Item condition: used Scope of delivery as shown in the picture You can find more items – new and used – in our shop! International shipping costs available upon request.

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding System, 8 kVA Universal welding station, 8 kVA, manually operated welding gun, dual program. Simultaneous connection of two tools with automatic selection of the corresponding welding program, which saves time and avoids errors, ensuring a simple and safe workflow. Body repairs: Resistance spot welding of sheet metal, smoothing with a dent puller (pins and washers), localized heating (carbon electrode), screw and rivet welding, dent removal from stainless steel sheet metal. Synchronous SCR welding control, adjustment of welding time in cycles and pulses, adjustment of welding current and compensation function. Dwedol Smn Sepfx Akmjc Mains connection: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50% duty cycle: 8 kVA Max. welding power: 35 kVA Max. secondary current: 6.4 kA Heat current 100%: 0.88 kA Year of manufacture: 2014 Weight: 85 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2020, x-travel 762 mm y-travel 508 mm z-travel 610 mm control MAX5 Hurco distance spindle nose and table 152 - 762 mm speed mainspindle max. 12.000 U/min power capacity - main spindel 13,4 kW max. Torque 214 Nm tool taper SK 40 DIN 69871 A table surface area 1.020 x 510 mm max. table load 1.500 kg T-slots 5 x 18 x 100 mm number of toolpositions 30 pos. tool taper SK 40 tool diameter max. 80 / 76 mm tool length - max. 300 mm weight of tools max. 7 kg rapid traverse X-axis 38 m/min rapid traverse Y-axis 38 m/min rapid traverse Z-axis 32 m/min total power requirement 24 kVA weight of the machine ca. 5,1 t dimensions of the machine ca. 4,0 x 4,1 x 2,8 m CNC-Machining Center Vertical HURCO - VMX 30i - Year 2020 / Commissioning 2025 - only approx. 500 operating hours - Adaptipath Trochoidal milling for higher metal removal rates, Dwsdpoz I T Rtjfx Akmsc controlled step-over, and residual material detection - Simulation graphics - Tool and material library - Pocket milling with islands - Synchronous tapping (Tapping without a compensating holder) - incl. 15x high-clamping force chucks BDV40-HMC20S-85 - incl. 3x tapping chucks BDV40-MGT6-80 - incl. mechanical centering vise BSM 250 - incl. 1x set of quick-change hardened grip jaws with grip strip - incl. various tap holders - incl. various drill bits and reducing sleeves

Condition: used, Vertical Slotting Machine GSP M 743 3-jaws chuck Ø 360 mm Table travel: X = 500 mm / Y = 450 mm Slide travel: 300 mm Throat depth: 500 mm Rotary table: Ø 690 mm Slide tilting: + 8° Rotative table/slide maxi height: 450 mm Dwedjz Nxxmepfx Akmjc Motor power: 8 CV Strokes/min.: from 3 to 300 strokes/min. Equipped with one tool removal system upon lifting Voltage: 380 V Length: 2000 mm Depth: 2500 mm Total height: 2200 mm Weight: approx 4 T

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. Dwsdpjz Ib R Iefx Akmjc A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Condition: excellent (used), MyRef MY-ZB26-TFD Refrigeration Unit MyRef MY-ZB26-TFD Condensing Unit suitable for refrigeration applications Typical applications include: Freezer chests in supermarkets and convenience stores Cold storage warehouses Beer cellars Milk cooling systems Standard features: Copeland Scroll M compressor ZB series with sound-dampening shroud Oil sump heater Liquid receiver with burst protection Filter drier Sight glass visible from the outside Ball shut-off valves Component-tested combined HD/ND safety pressure switch Electrical equipment: Control box IP 55, compressor contactor, DIN rail mounting Condenser is integrated and protected within the housing Condenser fins coated with epoxy resin phenol (gold lacquer*) High-quality housing: solid construction in 1.5 mm galvanized and powder-coated steel sheet, base plate and feet in 2 mm steel sheet Frame construction with individually removable panels; all screws and components are easily accessible from the front with minimal effort Riveting nuts with locking screws for secure, long-lasting fastening without rust problems; pressure-controlled speed controller with EMC filter Space-saving mounting of multiple units side by side possible; required mounting distance 25 mm Type: MyRef -ZB26-TFD Copeland Scroll Condensing unit type: MyRef -ZB26-TFD Installed compressor type: ZB19-KQE-TFD-525 Sound pressure level: 39 dB(A) @ 10 m Receiver volume: 6 liters Airflow: 4500 m³/h Refrigeration capacity: 9 kW Voltage: 400V, 3-phase, 50Hz Current consumption: 8.9 A Dwodpfovtl T Dsx Akmec Dimensions: H x W x D: 715 x 1120 x 450 mm Weight: 102 kg You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1982, operating hours: 1,234,567 h, machine/vehicle number: 223577, Used rubber injection molding machine, 80 tons. Werner & Pfleiderer, original control system. Machine runs well, but the hydraulics have an oil leak and should be repaired. Heating plate size: 300x400 mm, electrically heated. Core puller on top and bottom, hydraulically operated. Opening stroke: 360 mm. Injection volume: approx. 400 g. Cylinder temperature control units are not included. Other visible items in front of and behind the machine are not part of the auction. Removal must be arranged by the buyer. Dwedoz N Sykspfx Akmsc