Used Cfs Unimix T2500 for sale (284)

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm Isdpfoyfwxtjx Ab Njat dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Iasdpew Ixz Usfx Ab Net Hook height: approx. 4.3m Crane gauge: approx. 10.8m Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only.

Condition: good (used), Year of construction: 1995, Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from Rapid RVT 2500 electric forklift Iedpfxei Dyvwj Ab Neat -Hydraulic pump: Hidroirma type UP100K163-01 -Motor: Efel 36808 24 V -with: tank and control valve -Dimensions: 210/170/H360 mm -Weight: 10.5 kg

Condition: good (used), Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Rapid, chassis drive motor faus electric stacker RVT 2500 -Drive motor::LS Leroy Somer type T15 24V 2.0 kW -Motor brake: Lenze -Individual components: see photos -Dimensions: 290/285/H700 mm Iodpfx Asi Dyv Nsb Noat -Weight: 76 kg

Year of construction: 1995, condition: used, fuel type: electric, Tiller head, control panel, control unit, steering, steering unit -Manufacturer: Rapid, control panel steering completely from electric stacker RVT 2500 -Number: 1x drawbar available -Price per piece Ijdji Dywfepfx Ab Neat -Dimensions: 720/420/H180 mm -Weight: 14 kg/pc.

Condition: used, Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley Iaedpfx Ajd N Rt Djb Nst -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Condition: good (used), Year of construction: 2011, operating hours: 8,488 h, lifting height: 4,330 mm, fuel type: diesel, mast type: duplex, power: 38 kW (51.67 HP), motor manufacturer: Mazda 4cil, color: other, Empty weight: 4.110 kg Lifting capacity: 2.500 kg Number of valves: 3 Technical condition: good Iaedpfxev D Ebpj Ab Not Visual appearance: good Fork carriage: Sideshifter Please contact Bas Sindorf for more information

Condition: good (used), With extended roller table • Type – SILIKANT – 2500 • Serial number – 7609 1-12 • Year of manufacture – 2001 • Belt size – 100 x 2500 • Roller table (total length) 4.10 m × 0.55 m • Center section – 1.20 m • Sides 2 x 1.45 m Iaedpfx Aeuqlc Nob Njt • Height – 1.02 m • Price upon request

Condition: new, empty load weight: 500 kg, maximum load weight: 2,000 kg, overall weight: 2,500 kg, loading space length: 4,400 mm, loading space width: 1,900 mm, loading space height: 180 mm, tire size: 185/70r13, Car transporter from the manufacturer ANSSEMS, model AMT2500.440x190. As standard equipment, the Anssems car trailer has an aluminum floor, lashing eyes on the outside of the frame and on the top of the side panel, aluminum drive-on rails that can be inserted under the loading area, low chassis, removable front and rear drop sides that can be used as wheel stops, adjustable and extendable winch on the left and right, rear support set, support wheel and a V-drawbar. We also offer accessories for Anssems car transport trailers such as a high tarpaulin, wheel stopper, tool box, car lashing straps and anti-theft device. --- You can also find all our low-cost offers on our homepage Germany-wide delivery (except islands) possible! for the prices. --- Iaodjf Dtx Sspfx Ab Net PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: new, empty load weight: 580 kg, maximum load weight: 1,920 kg, overall weight: 2,500 kg, axle configuration: 1 axle, loading space length: 3,001 mm, loading space width: 151 mm, loading space height: 153 mm, loading space volume: 7 m³, suspension: other, tire size: 185/70r13, Cover trailer braked low loader tandem from the manufacturer ANSSEMS model GTT2500 301x151 VT3. As standard equipment, the Anssems box trailer with brake has a lockable lid with railing, aluminum side walls, drive-on flap, internal locks, adjustable lashing eyes, profile channels for mounting accessories or load securing, jockey wheel and a V-drawbar. Financing: possible WITHOUT down payment!!! You can find other sizes, equipment and other affordable models in our store: ----- You can also find all our low-cost offers on our homepage Iodpjf Nt D Rsfx Ab Nsat Germany-wide delivery (except islands) possible! for the prices. ----- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: new, functionality: fully functional, VFFS machine with volumetric cup filler for granules. PLC controlled, operation via touch screen, pneumatically driven cross sealing. Technical data: bag size: L20-160mm & W~22.5mm; Iaedpfov Hnzqsx Ab Net dosing range: 1-100g; max. speed of the machine in neutral: 50 cycles/minute; suitable film: laminated film, heat sealable; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: ~ L800xW700xH1800mm; weight: ~ 280kg.

Condition: used, Year of construction: 2023, 1,385 kg Working shaftVario with width S / PTO speed 1000 rpm PTO shaft W 2400 / both sides 1 3/8 inch Z6 length 1810 ( 31 / hydraulic embankment mulcher / linear lateral adjustment - hydraulic cylinder adjustment / hydraulic height adjustment of mulching head Iaedpfx Abstvgtxj Not

Condition: used, Year of construction: 2009, gearing type: other, first registration: 01/2009, color: orange, mileage: 1,001 km, empty load weight: 650 kg, driver cabin: other, Vehicle location: Bovenden, Superstructure: Salt spreader approx. 1.5m³ The salt spreader ran on a Unimog U20! Body spreader with 4x support legs! Iasdpfet E R Dbsx Ab Nst Dead weight approx. 650kg! Salt spreader approx. 1.5m³ Capacity liquid salt approx. 645l ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Iedpfof Rt Irsx Ab Nsat

Condition: ready for operation (used), Mori Seiki ZT2500Y Iaedpfjxur Hvjx Ab Net

Condition: excellent (used), Year of construction: 2009, operating hours: 3,645 h, clamping force: 2,500 kN, screw diameter: 35 mm, Arburg 1500T 2500-400/400/290 3K injection molding machine (235) Number: 235 Availability: in stock Year of production: 2009 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35, 40 Closing force [kN]: 2500 Plate size [mm]: 1500 Working hours [h]: 3645 Weight [kg]: Iaedpfx Abew Hx Uye Net 11200

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 59800 € 1130.22 € 100 to Iodpfowmwvcox Ab Noat 400 mm 800 x 500 mm 500 mm 110 mm/s 10 mm/s 160 mm/s 11 kW 1900 mm 1700 mm 2930 mm 5500 kg 250 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides T-slots can be configured according to customer requirements Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Hydraulic proportional valve Cooler Siemens electrical components 8 additional signal inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or Sick Category 4 sensors and photoelectric switch Two-hand control panel Reset and emergency stop buttons Equipped according to CE regulations

Condition: new, pressure: 100bending length: 2500column width: 2100daylight: 365stroke lenght (max.): 180column throat depth: 300messurements (LxWxH): 3760 x 2150 x 2450weight approx.: 6500motor power: 5,5          Standard equipment: KK-Industries GmbHhas the general agency of the KK Kletzer group of companies. We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by KK Kletzer bursa Turkey Model KK Kletzer Europa Compact The strong press brake KK Kletzer Europa Compact  is characterized by its high precision, accuracy and versatile application. KK Kletzer Europa Compact   press brake distinguishes itself by its high precision, accuracy and versatility. We focus on quality, which is also reflected in the control system. Ijdpfsd Iy Tvex Ab Neat As standard control we have the high-quality controls from Italy 10 2 D with simplest programming Furthermore, the press brake KK Kletzer Europa Compact  is equipped with Y1, Y2, X CNC axes via the control. Even with the top tool and the die we make no compromises and equip the CNC press brake KK Kletzer Europa Compact   with quality tools from EUROSTAMP Italy. or Rolleri Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. CNC axes Y1, Y2, X Control 2 D 10 Backgauge with double linear guidance and ball screw centrally adjustable crowning device 2 pcs Aulfagearme front heavy version Height adjustment on linear guide Laser protection device on the upper beam CE protection options: CNC R-axis     EURO 4.300,- CNC crowning EURO 2.600,- Distributed by: KK-Industries GmbH Tel: 0043 (0)664 380 7776 There's something for everyone!

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: Iedow Iqumjpfx Ab Noat -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, Model: GL 840 PH H-UV Year: 2016 Impressions: 218 million PQC-S OFF-PRESS CONTROLS (with USB/CF media input) – including overhead amp HIGH SPEED START-UP SMART SEQUENCE SELF DIAGNOSIS II KHS-AI - Pre-linking & removal - Self-learning function - Production management system (diagnostics, maintenance) - Register preset SMART FEEDBACK SIMULTANEOUS PRESETTING OF FRONT/BACK INK KEYS (all units) AIR PRESET FULLY AUTOMATIC PLATE CHANGING – BENDERLESS TRANSFER CYLINDER COCKING REMOTE CONTROL PAPER THICKNESS PRESETS PAPER SIZE PRESET PACKAGE • Sucker head preset • Slow-down wheel preset • Side lay guide • Delivery side jogger • Sheet release cam remote control FEEDER SIDE BLOWER PRESET FEEDER PILE SIDEWAYS CONTROL WITH PIT-LESS SKID LOADER SUCKER HEIGHT REMOTE CONTROL SUCTION TAPE FEEDER (Additional rubber wheels and belts on feeder board) ANTI-STATIC AT FEEDER SUCTION SIDELAY GUIDE FEEDBOARD VENTURI GUIDE ULTRASONIC DOUBLE SHEET DETECTOR REGISTER DETECTION (2-STEP DETECTION) ‘A’ TRANSFER CYLINDER GRIPPER PAD HEIGHT ADJUSTMENT ‘A’ (INFEED) CYLINDER COCKING REMOTE CONTROL ‘A’ (INFEED) CYLINDER ANTI-FANOUT REMOTE CONTROL ANTI-RUST TREATMENT FOR PLATE CYLINDERS ANTI-RUST TREATMENT FOR BLANKET CYLINDERS ANTI-RUST TREATMENT FOR IMPRESSION CYLINDERS ONE-TOUCH BLANKET CLAMP FOR BARRED BLANKET SHEET GUIDE OVER IMPRESSION CYLINDER AIR BLOWER ABOVE IMPRESSION CYLINDER SOLID TRANSFER CYLINDERS + GRIPPER PAD UP/DOWN (one-side adjustment) FULLY AUTOMATIC DOUBLE SIZE 3-CYLINDER PERFECTING UNIT IMPRESSION CYLINDERS WITH STAINLESS STEEL JACKET – after perfecting unit H-UV PROOF OIL SEALS INK DUCTOR INTERVAL ADJUSTMENT MOTORIZED INK FOUNTAIN ROLLER INK ROLLER NIP FOLLOWING INK ROLLER TEMPERATURE CONTROL (oscillation) INK OSCILLATION TIMING REMOTE CONTROL INKER FAN (feeder side on unit) INKER/DAMPENER DE-CLUTCH – all units INK MIST EXTRACTOR FANS (GL40) – New type KOMORIMATIC DAMPENING SYSTEM DAMPENING FORM ROLLER SPEED REDUCTION (Delta Effect) OSCILLATING RIDER ROLLER ON DAMPENING FORM ROLLER BRIDGE ROLLER Isdjy Rmdwopfx Ab Neat RIDER ROLLER UNDER DAMPENING FORM ROLLER SKEWING DEVICE ON KOMORIMATIC WATER LEVEL SENSOR AUTOMATIC BLANKET CLEANER (H-UV/pre-pack) AUTOMATIC IMPRESSION CYLINDER CLEANING (H-UV/pre-pack) INK WASHING TRAY PNEUMATIC ON/OFF AUTOMATIC INK ROLLER CLEANING – twin nozzles SHEET DECURLER AIR BLOWER ABOVE DELIVERY PILE ANTI-STATIC BAR AT DELIVERY DELIVERY SHEET ANTI-DEVIATION DEVICE AUTOMATIC LUBRICATION ON DELIVERY CHAIN GUIDE DELIVERY AREA SENSOR DELIVERY PILE EXTRACTION – DRIVE SIDE FIXED ROLLERS – A, B & C INTERCOM H-UV DRYER PREPARATION Technotrans Beta.c 280G Alcosmart, digidos.p 150C, FZT 120P. Conductivity display for Beta.c pH value display for Beta.c • PDC-SX (Print Density Control – Spectrophotometer and Automatic Register Control) • KID (Komori Info-Service Display) • Baldwin Ozone-Free Metal Halide H-UV System, including: - 1x H-UV LED – end of press - 1x H-UV LED – before perfecting unit • Technotrans Beta.c 280G • Technotrans external cooling system (installation excluded) • A-APC – Asynchronous Automatic Plate Changing • A-APC / Automatic Blanket Cleaner Parallel Control for GL-40 • K-PressNavi • DC Blowers • Special Ink Misting Cover on All Units

Condition: good (used), mileage: 598,627 km, power: 338 kW (459.55 HP), first registration: 09/2011, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, fuel: diesel, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2011, Equipment: AdBlue, central locking, cruise control, electric window regulation, fog lights, onboard computer, soot filter, = Additional options and accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Leaf suspension - Enclosed cab - Cab - Refrigerator - Air suspension - Particulate filter - PTO (power take-off) - Sun visor - Pre-heater automatic system = Remarks = DAF CF 460 6x2*4 - JOAB Hooklift - Steering axle - Euro 5 - Automatic MY: 5-8-2011 KM: 598,627 Chassis number: XLRAS85MC0E895592 JOAB hooklift Iasdpfxoywx Ete Ab Nst Steering axle Euro 5 Automatic gearbox = Further information = Transmission: AS Tronic, automatic Front axle: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Tire tread left: 40%; Tire tread right: 40%; Suspension: leaf suspension Rear axle 1: Tire size: 315/80R22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Suspension: air suspension Rear axle 2: Tire size: 385/65R22.5; Max. axle load: 7,500 kg; Steered; Tire tread left: 40%; Tire tread right: 40%; Suspension: air suspension Number of cylinders: 6 Gross Vehicle Weight (GVW): 28,000 kg Technical condition: good Optical condition: good

Condition: ready for operation (used), functionality: fully functional, mileage: 351,775 km, first registration: 06/2003, fuel type: diesel, axle configuration: 8x4, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2003, DAF CF 85.480 year 2003, 351,775 km, EURO3, three-way tipper Iajdpfxoy Sf D Ee Ab Njt

Condition: new, Year of construction: 2017, vibrator motor , vibrator motor , vibration motor , unbalance motor , vibration motor Friedrich , Type : F 4000-8-9.0 Iodpfegt Awzex Ab Njat CF max. : 120000 N Speed : 740/min power input : 7kw dimensions : 1130 x 450 x 465 (LxWxH) Weight : 600kg

Condition: used, maximum load weight: 28,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Moving Floor K100 92m³ 10mm Floor General Manufacturer: Knapen Trailers * Model / Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPN * Country of registration: Germany * Unladen weight: approx. 7,924 kg * Gross vehicle weight: 36,000 kg * Max. axle load: 24,000 kg * Max. kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered moving floor semi-trailer * Axle configuration: rigid/rigid/rigid ----Dimensions Exterior length: 13,670 mm * Exterior width: 2,550 mm * Exterior height: 4,000 mm * Interior height front: 2,690 mm * Interior height rear: 2,785 mm * Fifth wheel height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st-2nd axle: 1,310 mm * Axle spacing 2nd-3rd axle: 1,310 mm ----Axles & Chassis 3 x SAF 9 t Intradisc+ Integral CD Off-Road Axles * All axles rigid * Disc brakes Ø 430 mm * 10-bolt wheel connection * Air suspension with standard control unit on the left in front of the axles * Axle as lift axle, fully automatic via EBS * Includes traction assistance (3x braking) * Radio remote control for lift axle ----Tyres & Rims* Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels complete * No spare wheel ----Body Closed side walls left and right * Sliding partition wall (min. ground clearance 100 mm) * Rear doors with exterior locking bars * One lock rod per door * Upper belt made of steel, swiveling left and right * Platform at the front wall * Ladder at the front wall left and right * Standard cross beams Ø 60.3 mm (4 pieces) * Cross beam compartment: 3 x approx. 4,100 mm * Tarp 680 g/m² (RAL 9006 white aluminium) * Tarp supports with 3 positions (4 pieces) * Lashing straps (4 pieces) ----Floor / Moving Floor Cargofloor System CF-500 SL-C * Electric control * Corrugated aluminium floor boards 10 mm (21 boards) * Fixed front plate * Stainless steel plate at rear under the floor ----Attachments JOST landing legs with sliding compensation * Plastic toolbox left in front of axles (1000 x 500 x 500 mm) * 30 l water tank with soap dispenser * Closed side underrun protection * Swiveling mud flaps * Anti-spray mat on 3rd axle * Long staircase with extendable rear steps and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting 6 x round LED tail lights (3-chamber) * LED fog and reversing lights * LED side marker lights (4 pairs) * LED marker lights at the rear * Reflective contour markings according to EU regulation * LED work lights at the rear (radio controlled) * LED work lights at landing legs (radio controlled) * LED LCG-2 switch control unit ----Hydraulics / Connections ISO-N and ISO-S couplers + 15-pin plug * Radio remote control Knapen Trailers V1 * Hydraulic connections centrally at the front wall (vertical) * Pressure line left, return line right * Additional hydraulic connectors at the landing legs * Brake connections available * Acoustic reversing alarm (manually adjustable) ----Paintwork Body painted in RAL 7011 iron grey * Wheel hubs in RAL 2008 light red-orange * Chassis and underside unpainted Iaodpey Ngbaefx Ab Not For further information, I am at your disposal.

Condition: used, functionality: fully functional, mileage: 316,475 km, first registration: 09/2007, Year of construction: 2007, operating hours: 4,813 h, DAF CF 85.480 with IMER concrete mixer First registration 04.09.2007 – Euro 4 316,475 km H 4813 4 axles IMER LT 130 ID configuration – Auxiliary engine Tyres 50/60% Valid technical inspection Good condition Immediately available WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, PUTZMEISTER; OR EARTHMOVING MACHINERY BY CATERPILLAR, FIAT HITACHI, KOMATSU Iajdpfx Aoy Shv Dsb Net