Used Champagel Champagel Anlage for sale (431)

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general Crsdpfxjzba Nyo Appjc The system operates according to the principle of convective warm air drying: Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Condition: ready for operation (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, number of previous owners: 2, Equipment: cooling unit, type plate available, The twin-screw extruder has been used little. New screw shafts and a water cooling system have been overhauled. The control cabinet is present. The calender has a 1.75 mm x 2-hole strand die. Csdpfx Aov I R Trjpperc

Condition: used, maximum load weight: 32,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 03/2027, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2023, Equipment: ABS, 3-axle tank semi-trailer KÄSSBOHRER, type STC 28/1-10/24 "AD-BLUE" including calibrated Bartec PETRO3003 metering system First registration 01/2023, German semi-trailer, first owner Tank saddle trailer made of V2A stainless steel Insulation 100 mm Volume 28 cbm, with 2 bulkheads. The front bulkhead is closed in the lower area, so that approximately 5,000 liters remain in the first compartment above the kingpin. Discharge takes place via an outlet with a butterfly valve, ending in the rear cabinet. 1 x filling dome/manhole DN 500 Aluminum short chassis Wabco trailer EBS with RSS anti-roll protection BPW axles with disc brakes Tires 6 x 385/65 R 22.5 Aluminum rims, polished 1st and 3rd axles are lift axles Access ladder on the right side of the tank Data acquisition via BARTEC PETRO 3003 Chem with compact controller Printer in a protected stainless steel display case WIRELESS remote control for hose reel, metering system and rear roller shutter 20 m discharge hose DN 50, dispensing nozzle with TW coupling Vogelsang rotary lobe pump GL186Q, self-priming, tank filling with its own pump. Fast loading and unloading with up to 600 l/min discharge rate. Overfill protection, internal and external Pneumatic roller shutter with wireless remote control 2" discharge connection RENTING is the new BUYING, with us also available in full-service rental IMMEDIATELY. Credozbwy Aspfx Appoc

Condition: excellent (used), EOS GmbH EOS P 396 Laser Sintering System Professional SLS system for additive manufacturing and industrial plastic 3D printing For sale is a professional industrial laser sintering system of the type EOS P 396 from the manufacturer EOS GmbH. The system comes from commercial industrial use and is offered including control panel, powder handling system, docking station, multi-boxes, documentation, service records and accessories. The system uses the process of Selective Laser Sintering (SLS) and is suitable for additive manufacturing, rapid prototyping, small series production and industrial applications. Suitable for research & development, automotive, mechanical engineering, aerospace, medical technology and industrial plastic processing. Technology: Selective Laser Sintering (SLS) Usable build volume: 340 x 340 x 600 mm Build rate: up to 48 mm/h (material-dependent) Layer thicknesses: 0.06 mm / 0.10 mm / 0.12 mm 0.15 mm / 0.18 mm Laser system: CO₂ laser 70 W laser power F-Theta precision optics Scanning speed up to 6 m/s Laser Class 1 Electrical data: Voltage: 400 V 3~ / N / PE Frequency: 50 / 60 Hz Rated power: 10 kW Current consumption: 16 A Mains fuse: 32 A Supply: Integrated nitrogen generator External nitrogen connection available Compressed air supply required: min. 10 m³/h at 5,000 hPa Software: EOS PSW EOS RP Tools EOSTATE Interfaces: STL Ethernet Certifications: CE NFPA EN 60825-1:2007 Maintenance condition: Current service and maintenance records available. According to the available service reports, the following have been renewed, among other things: heating elements, roller band replaced, X-axis and carriage cleaned, laser window and mirrors cleaned, seals renewed and safety circuits tested. Additionally included: Docking station for powder supply with pneumatic conveying system The docking station is used for the automated supply of the laser sintering system with powder material and supports an efficient material flow. Manufacturer: HYDAC Cooling GmbH Type: FWKS-G2-001500-W-W-R25-2-IW-UL Electrical data docking station: 230 V ±10 % 1 PH / 50-60 Hz Max. current consumption 8.0 A ICC / SCCR 10 kA CE / RoHS 2x EOS Multibox For closed storage, for transport and for collecting refreshed and used powder. Capacity per multi-box: approx. 230 liters Dimensions according to documentation: System incl. control cabinet: approx. 1840 x 1175 x 2100 mm Control panel: approx. 950 x 700 x 1550 mm Total weight laser sintering system: approx. 1400 kg Recommended installation space: at least 4.3 x 3.9 x 3.0 m Dimensions and weight data are based on the best of our knowledge according to nameplates and manufacturer's documentation. Scope of delivery: EOS P 396 Laser Sintering System Control panel Docking station 2x EOS Multibox Available documentation Service reports Accessories and components according to the pictures Crodpfjzarg Usx Appoc Condition: used Optical condition see pictures Scope of delivery as shown in the pictures Inspection and testing on site is possible after prior agreement and is expressly desired. Loading and transport organization can be supported after consultation. Important note: All information has been provided to the best of our knowledge based on the pictures, nameplates, available documents and manufacturer information. (Changes and errors in technical data are reserved!) We will be happy to answer any further questions by telephone.

Condition: new, empty load weight: 4,300 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2023, Vehicle location: Bovenden, container locking, rear support Csdoyrqqispfx Appsrc Body: Telescopic skip loader system suitable for 3-axle trucks ACCESSORY DETAILS WITHOUT GUARANTEE; subject to Change, prior sale, and errors excepted!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 16,000 mm, The centerpiece is a KITZINGER contino 400/2 KLT continuous container washing system, commissioned in 2019, complete with an associated reverse osmosis system. In addition, there is a PERKUTE Clean-O-Mat RC 122 top-loading cleaning system, three modern forklifts, and packaging and securing technology. All systems are ready for operation and will be delivered ex-works from Kerpen. CLEARANCE SALE — COMPLETE PACKAGE OR INDIVIDUAL SYSTEMS Acquisition possible as a complete package or in individual lots. Csdpfx Aszazk Njppsrc Lease of the KITZINGER system fully paid off — direct transfer of ownership. High-quality brand components (LENZE, EDUR, ELEKTROR, SIEMENS) — attractive resale value. Ex-works (EXW) — dismantling and transport to be organized by the buyer. Complete technical documentation and maintenance history are available. System I — KITZINGER contino 400/2 KLT container washing system Industrial continuous container washing system designed for service providers, with three active washing zones, rinsing, and a heated drying section. The entire machine, which is 16.2 m long, features a high-quality stainless steel construction with double-walled sound and thermal insulation. Manufacturer / Type: KITZINGER Maschinenbau GmbH · contino 400/2 KLT Year of manufacture / Status: 2016 · ready for operation Machine length: 16,200 mm · straight line, zones arranged one behind the other Tunnel dimensions: Width 410 mm × Height 410 mm · passage width 160–410 mm Hourly output: 200–300 containers (60/40) and 200–300 lids Connection: 400 V / 50 Hz / 140 kW (2 control cabinets) Sound emission: ≤ 85 dB(A) in accordance with BGN specifications Premium components (brand-specific — attractive for resale) ▸ LENZE drive system and frequency converters for all zones ▸ EDUR stainless steel centrifugal pumps — Zone 1: 4 kW · Zone 2: 5.5 kW · Rinsing zone: 4 kW ▸ ELEKTROR fan motors — BS2: 2 × 5 kW · BS3H: 3 × 5 kW with 15 kW additional heating ▸ SIEMENS control cabinet components in both control cabinets ▸ POLO band skimmers in washing zone 1 and washing zone 2 Three washing zones plus rinsing and drying section Infeed zone 2,000 mm: Stainless steel belts with cams · adjustable side guides · vapor hood Washing zone 1 (2,700 mm): External filter tank 1,000 l · heater 20 kW · 55 °C · 1,500 l/min 1.5 bar Washing zone 2 (2,700 mm): External filter tank 800 l · heater 30 kW · 60 °C · 1,500 l/min 2 bar Rinsing zone 3 (1,800 mm): External filter tank 400 l · heater 40 kW · 65 °C · fresh water cascade Blow-off BS2 (1,800 mm): 2 × ELEKTROR 5 kW · adjustable stainless steel air knives Blow-off BS3H (2,700 mm): 3 × ELEKTROR 5 kW · electric additional heating 15 kW Neutral drain zone: 500 mm with suction port Special features: Completely double-walled insulated · nozzle arms can be removed without tools System II — Filter systems / Reverse osmosis Reverse osmosis water treatment system, which significantly reduces the fresh water volume and feeds it into the closed circuit of the three washing zones. Manufacturer / Type: TopWater 401/1000 — Reverse osmosis system Year of manufacture / Status: 2022 · ready for operation Function: Water treatment, reduction of fresh water consumption In addition, a PERKUTE Clean-O-Mat RC 122 top-loading cleaning system in an SPF cart version is available for the intensive cleaning of smaller and heavily soiled parts. Manufacturer / Type: PERKUTE · RC 122 (Clean-O-Mat SPF cart) Machine no. / Year of manufacture: S 1993 · 2008 Connection: 400 V / 50 Hz · 2

Condition: ready for operation (used), Year of construction: 1989, Pallet block saw LUDWIG incl. feeding of the blocks to the skid nailing machine Skid nailing machine with automatic feeding of the skids to the skid infeed Skid infeed incl. skid supply conveyor with skid turner and automatic separation, positioning and skid feed Assembly machine with U-template suitable for manual, semi-automatic or fully automatic feeding with automatic narrow / wide travel cycle time for nailing: start - nailing - nailing - nailing - template in starting position approx. 6 seconds Column stacker including various stacking programs, 90° or 180° stacking of pallets possible Crodpjuzhrpjfx Appsc All nailing machines with central lubrication

Condition: used, Dürkopp overhead hanging bag conveyor system for 9 levels Automated Dürkopp conveyor system for in-plant material handling and sorting. The system spans nine interconnected levels and is suitable for transporting overhead hanging bags in logistics, shipping, textile, and distribution centers. Manufacturer: Dürkopp Fördertechnik Csdpfx Asza Uydepporc Machine type: Overhead hanging bag conveyor system Design: Automated conveyor system Conveying principle: Rail-guided hanging bag conveyor Number of levels: 9 Levels interconnected Dimensions per level: approx. 90 x 20 m Conveying distance across multiple floors Rail system with curves and switches Electric drives available Control and conveying elements available Industrial design Hanging bags are not included in the offer The system is designed for the transport of overhead hanging bags Matching hanging bags can be offered separately upon request Condition: Used Location: Pforzheim

Condition: used, Manufacturer: CALJAN Manufacturer: Van der Lande Industries Machine type: Conveyor system / Package conveyor system Design: Multi-lane conveyor system Construction: Two-level system Cedpfsza Umdjx Apporc Conveyor technology: Belt conveyor Length: approx. 80 m Levels: 2 Color: Red / Gray Condition: Used Location: Pforzheim

Year of construction: 2020, condition: used, functionality: fully functional, construction height: 2,200 mm, number of spindles: 3, space requirement length: 5,000 mm, space requirement width: 5,500 mm, machine/vehicle number: 50844458, degree of automation: automatic, production capacity: 3,000 unit/h, We are offering this used PIA Automation production line for surgical disposable masks, manufactured in 2020. The system was operated for only 2.5 years in single-shift operation and can be described as being in "very good" condition. In addition to the production unit, the line includes a connected compressed air generation system as well as a packaging and shrink-wrapping unit. The buyer will also receive raw materials sufficient for the production of approximately 300,000 surgical disposable masks. Crsdpfx Aey Ddnmeppjc Year of manufacture: 2020 Operating pressure (pneumatics): 6.0 bar Operating voltage: 3P/N/PE 400V AC 50 Hz Connection protection: 25 A Short-circuit capacity: < 10 kA System Concept: The line consists of a total of three sections, which are connected by conveyor belts. In the first segment, the individual consumables are fed in via rollers, folded, the nose wire integrated, welded, and then cut to the correct length. The finished, cut masks are then conveyed by an indexing belt and transport conveyors to the subsequent stations, which are arranged in parallel. At these stations, the ear loops are fed in and welded to the face mask. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Satellite blasting system from Nicolis; 6 satellites with rotary motion; horizontal up/down motion with up to 6 nozzles, individually switchable; Maximum component size: height 320 mm, width 230 mm. System was used only for demonstration and testing purposes and is being sold due to disuse. Delivery/customs clearance available upon request. Crsdpfx Apjwbhb Sspoc Inspection and test run available upon request.

Condition: ready for operation (used), Norgen control unit system control .: 1950025 Serial number: 32/00 A=3-9 + 600665 for Emag machine, used, good condition, 100% functional, scope of delivery as per photos Codpfxeul Iphj Appjrc

Condition: used, Year of construction: 2015, operating hours: 1,864 h, lifting height: 4,700 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-80 diesel forklift, manufactured in 2015, hours: 1,864h!, previous owner: German Armed Forces, air conditioning, rated lifting capacity: 8,000 kg, lifting height: 4,700 mm, duplex mast, hydraulic sideshift, fork positioner, full cab, fork length: 1,800 mm, fork extension: 2,400 mm, diesel engine: [80 kW / 109 hp], weight: 13,600 kg, in good condition!, ready for immediate use! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Power steering, cab = Further information = Credezaywzspfx Appsc Lifting capacity: 8,000 kg Overall height: 280 cm Please contact Tobias Ebert for more information.

Condition: new, empty load weight: 1,750 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2021, Vehicle location: Bovenden, hydraulic cross-locking Construction: 12t unrolling system for containers from 3.6m to 5.5m, hook height 1570mm, titanium version, hydraulic combination container locking (inside and outside), RAL 9005 Jet Black, device length: 4500mm! Price per piece! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Cjdpfx Aev Hr Rvepporc - .

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), axle configuration: 4x2, gearing type: automatic, Year of construction: 1998, GVW: 12.000 kg Please contact Emal Jaweed for more information Csdszapnvspfx Apporc

Condition: used, QliQFlow Conveyor System for Warehouses and Order Fulfillment Centers Modern conveyor system for use in warehouses and order fulfillment centers. Suitable for the transport of cartons, containers, and individual items in shipping, warehousing, and intralogistics processes. Manufacturer: QliQFlow Product Type: Conveyor System Cedpezaqpbofx Apporc Design: Modular Conveyor System Components: Roller conveyors, curved conveyors, incline conveyors, conveyor belt segments, safety fences, control cabinet, operator panel, light signaling systems, emergency stop devices Application Area: Warehouse Logistics Application Area: Order Fulfillment Application Area: Shipping Logistics Application Area: Intralogistics Condition: Used Further information available upon request.

Condition: used, mileage: 22,173 km, power: 260 kW (353.50 HP), first registration: 11/2022, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2028, color: green, gearing type: semi-automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, parking heater, Internal vehicle number: G190366 German vehicle Available immediately at our yard in Kaufungen - Kassel More information at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) MB UNIMOG U435 4x4 all-wheel drive 353 hp Euro 6 Tipper Permissible gross vehicle weight 14,000 kg Unladen weight 7,451 kg Equipment (see pictures for further details): A30 Tire pressure control system A31 Wheel-side, wheel-base-dependent parts for tire control E40 ABS trailer socket 24V, additional E42 Trailer socket 12V, 13-pin, additional E45 Socket front 24V, 7-pin H43 Tilting cylinder H55 Hydraulic connector connection rear, 4-way, cell 1 + 2 H58 Pressure line rear, for 2nd hydraulic circuit H59 Separate return line rear H86 Hydraulic connector couplings ISO 7241-1 A/ISO 5675 J48 Warning light for telescopic cylinder L59 Stand on the left and right for rotating beacon L60 Entry lights in the access area M74 Radiator quick cleaning system Clean-Fix N00 Preparation for retrofitting front PTO N05 Engine auxiliary drive to the rear (with flange) N09 PTO speed limitation when N08 is active P01 Quick-change system for platform body P60 Platform subframe for third-party superstructures Q33 Lowered rear cross member for 2 trailer couplings R32 Disc wheels 10.00V-20 for 365/85R20 Y95 Preservation/final inspection only after conversion Z01 Vehicle with left-hand drive Z64 Control for special customer request (+ 7 AT) Z96 Provisioning fee (SN) ZL9 Omission of delivery scope specification, approval incomplete Financing example: * Internal number: G190366 * Purchase price: 139,900.00 € * Down payment: 10% Credsyr Umbspfx Appoc * Term: 60 months * Monthly rate: 2,147.79 € Residual value: 27,980.00 € If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, Year of construction: 2022, operating hours: 1 h, machine/vehicle number: 268955558, GREMAC e1 trommel screen Tandem chassis / axles 2x kg ( permissible total weight) kg empty weight without aggregate Overrun brake Vehicle lighting according to StVzO TÜV acceptance Drum length: mm Diameter: mm 4,0 kW electric drive speed adjustable with frequency converter driving screw adjustable cleaning brush Crsdpsl Hbcfsfx Appec hopper with conveyor belt rubber belt with chevron profile 0,75 kW electric drive speed adjustable with frequency converter Fine grain collecting belt Movable suspension Rubber belt in smooth design 1,5 kW electric drive Speed adjustable with frequency converter Fine grain belt Movable suspension Rubber belt with chevron profile 2,2 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Over-grain stockpile conveyor Movable suspension Rubber belt with chevron profile 1,5 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Control system PLC Siemens Logo Control panel with buttons and potentiometers 400V load circuit 24V control circuit Main switch Ceekon 16A socket EMERGENCY OFF relay Without generator Cladding Hot galvanized frame parts painted drum cladding powder coated in RAL7005 and 5018 Further information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: good (used), functionality: fully functional, We are selling various used rollers here, which are used in laminating systems manufactured by Bürkle. All rollers are designed for a processing width of 1,300 mm. Type and condition are listed below. Cedpfsvnaa Iex Appsrc 1. Applicator roller for adhesive, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 2. Applicator roller for adhesive, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 3. Applicator roller for adhesive, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 4. Applicator roller for adhesive, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 5. Applicator roller for hardener, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 6. Applicator roller for hardener, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 7. Applicator roller for hardener, 1,300 mm, ⌀ 240 mm, used, price: on request 8. Applicator roller for hardener, 1,300 mm, ⌀ 240 mm, used, price: on request 9. Metering roller for adhesive, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request 10. Metering roller for adhesive, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request 11. Metering roller for adhesive, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request 12. Metering roller for hardener, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request 13. Metering roller for hardener, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request All rollers are used and are sold without warranty.

Condition: new, empty load weight: 2,230 kg, color: black, driver cabin: other, gearing type: other, Vehicle location: Bovenden, hydraulic cross locking Crodpjzakpnofx Appjc Body: 20t hooklift system for containers from 3.8m to 5.7m, hook height 1570mm, Titan version, hydraulic combination container locking (internal and external), RAL 9005 Jet Black, device length: 4700mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: new, empty load weight: 2,230 kg, color: black, driver cabin: other, gearing type: other, Vehicle location: Bovenden, hydraulic cross locking Body: 20t hooklift system for containers from 3.8m to 5.7m, hook height 1570mm, Titan version, hydraulic combination container locking (internal and external), RAL 9005 Jet Black, device length: 4700mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Cjdozakphopfx Appsrc

Condition: new, empty load weight: 1,750 kg, color: black, driver cabin: other, gearing type: other, Vehicle location: Bovenden, hydraulic transverse locking system. Superstructure: 12-ton roll-off system for containers with a hook height of 3.6m to 5.5m, 1570mm, Titan version, hydraulic combination container locking system (inside and outside), RAL 9005 Jet Black, equipment length: 4500mm! Crodpfx Aszakpboppec Price per unit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), Year of construction: 1998, Skid-mounted nailing machine P + K Pallet nailing machine P+K SNM-III-24-1250 Intermediate drive with branding punch Positioning table Portal stacker Csdsuzh Anjpfx Apperc Pallet size 600x800 - 1200x1400 mm

Condition: used, functionality: fully functional, Year of construction: 2008, Used filter system Manufacturer: Dantherm Year of manufacture: 2008 Type: FS 720/5.50/770 Crsdpfx Apezav Euspjc Volume flow: 72,000 m³/h Temperature: 120 °C Installed total area: 1047 m² Effective area: 990 m² Total connected power of all drives: 10 kW Exhaust system complete with duct system Chimney 3 x screw conveyors

Condition: new, color: black, driver cabin: other, gearing type: other, Year of construction: 2022, Vehicle location: en route / in transit. Crsdpfoy U N Nqex Appec Body: 18-ton hooklift system Hiab Multilift Ultima 18S56 for containers up to 6.5m in length. Device length: 5600mm (G-dimension). Hook height: 1570mm. All information is provided without guarantee, as the hooklift system is currently en route! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE, subject to change, prior sale, and errors!