Used Chemo Grp Barrel for sale (387)

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any work roll diameter: 120 mm Itsdpfx Aep E Egljcweg barrel length: 150 mm backup rolls: backup block/chain

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm Itedpop E Ed Rjfx Acwjg

Condition: new, power: 184 kW (250.17 HP), fuel type: diesel, overall weight: 11,990 kg, color: grey, gearing type: automatic, loading space length: 6,000 mm, loading space width: 2,550 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, IMMEDIATELY AVAILABLE CERTIFIED ACCORDING TO VDI 2700, 8:1, 8:2 * Photos do not show the original vehicle. The actual trailer is equipped with a twin axle. Current photos to follow. Vehicle transporter MAN TGL 12.250 4x2 BL: * Rear axle with air suspension * PTO (power take-off) * Cab with 2 individual seats * Sleeping compartment * Auxiliary heater * Radio * EU tachograph 4.1 * GSR 2 equipment Car transporter body DS12 [MODULO]: * Double-deck body for transporting 2 passenger cars or 1 small van/mobile home * Lower deck loading area approx. 600 x 255 cm * Lifting deck approx. 400 x 240 cm * Winch with remote control (wireless and wired) * Body hot-dip galvanized Iedpfx Acofq Nckjwotg Trailer: * BLYSS air-braked trailer for 3 passenger cars * Twin axle with twin tyres, GVWR 18,000 kg * Payload approx. 13,500 kg * Loading area approx. 900 x 255 cm * Rear section extendable by approx. 150 cm * Lifting deck approx. 450 x 240 cm * BPW axle * ABS * Trailer with perforated driving plates * Vehicles securable in any position according to DIN * Trailer hot-dip galvanized Optional Tandem axle with twin tyres, GVWR up to 18,000 kg * Payload up to approx. 13,500 kg Load securing equipment also available from us: * Lashing and tension straps * Load bars * Safety vests * Transport boxes * Edge protection * Dunnage bags * Wheel chocks * etc. Financing and leasing available We manufacture bodies of any size and type for any chassis. Tarpaulin, GRP sandwich, aluminium. Visit us at: Bodies – Complete vehicles – Trailers – Consulting – Financing Subject to errors and prior sale. No liability for misprints or input errors.

Condition: ready for operation (used), Year of construction: 2024, clamping force: 3,500 kN, screw diameter: 50 mm, injection weight: 437 g, total width: 2,210 mm, total height: 2,050 mm, overall weight: 18,500 kg, product length (max.): 8,000 mm, Electrical injection moulding machine manufactured in 2024. This Negri Bossi NOVA e350T H1550 features a screw diameter of 50 mm and a clamping force of 3500 kN. It offers a maximum mould opening stroke of 695 mm and a platen size of 1110 × 1200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi NOVA e350T H1550 machine we have for sale. Contact us for further details regarding this machine. • Injection Unit (1550) • Screw L/D ratio: 20 • Theoretical injection volume: 480 cm³ Isdjytgbyspfx Acwjtg • Injection speed: 300 mm/s • Injection rate: 588 cm³/s • Maximum pressure on material: 2100 bar • Holding pressure: 1100 bar • Screw torque: 900 Nm • Screw speed: 250 rpm • Plasticising capacity (PS): 56 g/s • Barrel heating zones: 5 • Heating capacity: 36 kW • Nozzle contact force: 50 kN • Clamping Unit • Locking force: 3850 kN • Max. mould opening stroke: 695 mm • Min–Max mould height: 350–800 mm • Platen size: 1110 × 1200 mm • Tie bar spacing: 820 × 820 mm • Ejector force: 70 kN • Ejector stroke: 200 mm • Power • Total installed power: 216 kW

Year of construction: 2000, condition: used, General Technical Description: The Macchi 3-Layers is a three-layer blown film co-extrusion line designed for the production of high-quality tubing and sheeting films. The line is capable of processing LLDPE, LDPE, mLLDPE, MDPE, and HDPE. Film production utilizes an upward bubble-up working principle. The machine is equipped with a 350 mm 3-layer die head and delivers an output capacity of up to 450 kg/hour. EXTRUSION GROUP: Extruders: 65 mm + 80 mm + 65 mm • Infrared heating zones • Hydraulic screen changers The Coexflex Size 3 extrusion group includes: – Two high-performance extruders 65/30D (layers A and C) – One high-performance extruder 80/30D (layer B) – Bimetallic barrels – Nitrided, high-mixing screws – Water-cooled grooved feed sections – AC motors with digital frequency converters (74 kW for 65 mm, 100 kW for 80 mm) DIE HEAD: • Model TE502 • 350 mm diameter, die gap 1.8 mm • IBC (Internal Bubble Cooling) • Electroless nickel-plated flow channels • 4+4 ceramic heating zones • Mounted on a die cart with integrated air distribution manifold COOLING SYSTEM: • Dual-lip Plast-Control air ring • Coexflex version includes Double Flux Cooling Ring ASR3, with inverter-driven blower and interchangeable inserts TAKE-OFF UNIT: • Take-off width: 1800 mm • Oscillating nips • Side gusseting capability WINDING SECTION: • Double automatic back-to-back winder • Fully automatic roll change • Maximum winding width: 1750 mm • Cardboard core diameter: 76 mm FILM SPECIFICATIONS: Film widths achievable with 350–400 mm die: 1300–1700 mm Thickness range: 18–200 μm Output example (Coexflex specs): 1600 mm width, 100 μm LDPE → 400 kg/h Iodpfx Aoyt Ikvecwetg LINE SPECIFICATIONS: • Total line height: 10 m • Mechanical winder speed: 7–110 m/min • Installed electrical power: 320 kW, 415 V, 3-phase + neutral • Cooling water consumption: 6 L/min • Compressed air requirement: 6 bar AUXILIARY EQUIPMENT: • Tower • E+L web guiding system • Piovan gravimetric weight control • Piovan Quantum dosing units • Plast-Control automatic thickness control • Calibrating basket • Corona treater (Ferrarini & Benelli) • FBF cold-needle micro-perforation • Air shafts (8 pcs) This translation uses precise, industry-standard terminology suitable for machinery and equipment descriptions on professional trading platforms.

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Isdpfx Aoypat Iocwjtg Available from mid-April/May Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Band saw blade 6000x100x1.1 mm stellite Water cooling with 20 l barrel 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Extension 3 m without support beam Chip collection box

Year of construction: 2018, condition: used, construction height: 2,000 mm, bed width: 2,700 mm, Equipment: CE marking, We are offering this used "Marican" L250E3 two-vessel brewhouse with fermentation tanks, year of manufacture 2018. The brew kettle capacity is 250 liters per batch. The system consists of a mash tun with integrated false bottom and a wort kettle with integrated whirlpool. Additionally, a hot liquor tank for sparge water is included. For cooling, a plate heat exchanger is installed. There are also 3 open, non-refrigerated fermentation vessels, as well as all hoses and a pump for cold wort transfer. The brewery is equipped with a 32-amp three-phase power connector. A fixed water connection is not required. If interested, a "Sommer" Maltman 55 grist mill, a barrel washer, a manual counter-pressure filler, and a capper are also available. Stainless steel kegs in various sizes can be purchased as well. Iodpfxjyt Nlno Acwotg The system was in regular operation until 2025. Machine type: L250E3 Model number: 551 Year of manufacture: 2018 Wiring diagram number: MAB-118 If you have any questions, please feel free to contact us at any time.

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Isdpfjub S R Hjx Acwjtg Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: new, mileage: 10 km, power: 103 kW (140.04 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 7, loading space length: 3,250 mm, loading space width: 2,220 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, German new vehicle: * Unregistered * Euro 6 * 6-speed gearbox * 7 seats * 90 L fuel tank * Gross vehicle weight: 3,500 kg * ABS + ESP * Driver airbag * Mirrors suitable for body width of 2,350 mm * Reinforced rear axle suspension * Multifunction system with DAB radio and steering wheel controls * Central locking with remote control * Electric windows * Electrically adjustable/heated exterior mirrors * Tow bar with 3,000 kg towing capacity Iedeyrwubopfx Acwetg Sliding curtain body: * Substructure: Aluminium * Sliding curtain on both sides with removable central stanchion * No side dropsides * Floor: 15 mm multiplex wooden floor * Internal dimensions approx. LxWxH 335x220x220 cm Load securing equipment also available from us: * Tensioning and lashing straps * Load bars * High-visibility vests * Transport boxes * Edge protection * Dunnage bags * Wheel chocks * etc. Financing and leasing options available We manufacture bodies in any size and for any chassis. Tarpaulin, GRP sandwich, aluminium lightweight panels Visit us at: Bodies – Complete vehicles – Trailers – Consultation – Financing Errors and prior sale excepted, no liability for printing or input errors.

Year of construction: 2013, operating hours: 1,000 h, condition: ready for operation (used), This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits Iedpfx Acsx D Ewmswetg • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW Iodoyf Htyspfx Acwjtg • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: ready for operation (used), Year of construction: 2001, operating hours: 98,780 h, clamping force: 2,000 kN, overall weight: 12,200 kg, controller manufacturer: ENGEL, controller model: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping unit • Mold weight (WZ): 1500 kg • Total moving weight: 3000 kg • Minimum mold height: 550 mm Ijdpfeyf H Nnjx Acwotg • Mold opening stroke: 700 mm • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter A-side: 110 mm • Centering ring diameter B-side: 90 mm • Mold locking system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A-side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (Main) – Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle orifice: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (Secondary) – Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump motor: ~6.8 kW • Machine axes travel • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / Process control: Yes • Pressure interface: Yes • Second injection barrel: Yes • Mold monitoring: No • Cavity pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition • Well-maintained and serviced Additional equipment • Engel Linear Take-out Robot ERC 23/1-E (included)

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. Itedpfx Acsydnigowsg • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: ready for operation (used), Year of construction: 2021, operating hours: 12,000 h, clamping force: 3,000 kN, screw diameter: 50 mm, injection weight: 375 g, total width: 2,100 mm, total height: 2,500 mm, overall weight: 14,600 kg, product length (max.): 7,000 mm, Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details. • Max. mould opening stroke: 600 mm • Min./Max. mould installation height: 280 / 650 mm • Max. platen distance: 1250 mm • Tie bar spacing (H x V): 730 x 730 mm Isdpfjyrgq Esx Acwetg • Min. mould size: 470 x 470 mm • Platen size (H x V): 1040 x 1040 mm • Ejector stroke: 160 mm • Ejector force: 68.6 kN • Injection unit size: Euromap 120 • Screw L/D ratio: 20 • Theoretical shot volume: 412 cm³ • Injection pressure: 2000 bar • Holding pressure: 1600 bar • Injection speed: 160 mm/s • Injection rate (PS): 274 g/s • Screw speed: 320 rpm • Plasticizing rate: 46 g/s • Nozzle contact force: 85 kN • Barrel heating power: 20.2 kW • Connected load: 36 kW / 60 A • Hydraulic pressure: 175 bar • Hydraulic flow rate: 90 l/min • Oil tank capacity: 135 l • Material hopper volume: 50 l • Control system: Sigmatek with 15" colour touch screen • USB interfaces: 3 • Robot interface: Euromap 67 • Robot adapter: Euromap 18 • Form data memory: up to 200 moulds • Production data recording: up to 100000 cycles • Statistical process control (SPC) system • Central lubrication system • Automatic mould height adjustment • Compact 5-point toggle clamping system • Hydraulic ejector system with vibration function • Parallel mould opening and ejector movement • Up to 3 hydraulic core pulls • Cooling water distributor system • PID temperature control system • Ceramic heater bands with thermocouples • Automatic purge function • Energy-saving cylinder insulation • Adjustable machine feet • Installation tools included • Hours: ca. 12,000

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Iedeyugalspfx Acwotg Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: new, power: 152 kW (206.66 HP), fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 6,300 mm, loading space width: 2,400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, ----IVECO DAILY 70C21HA8/P * German documents * Without registration * 2-year manufacturer warranty from Iveco * GVW: 7,200 kg * EURO VI * 8-speed automatic transmission * Factory-installed air suspension on rear axle * Driver’s seat with hydraulic suspension * Central locking with remote control * Radio with Bluetooth and navigation * Multifunction leather steering wheel * LED daytime running lights * LED headlights * Electric windows * Electrically adjustable exterior mirrors Double-deck bodywork: * Approx. 630 x 240 cm * Steel frame with C-profile * Electrically driven hydraulic tail lift * Aluminum loading ramps * Electric winch with wireless and cable remote controls * Side underrun protection painted in vehicle color * LED light bar * Mudguards with mud flaps * Trailer coupling with 3,300 kg towing capacity Load securing equipment also available from us: * Lashing straps and tie-downs * Restraining bars * High-visibility vests * Transport boxes * Edge protectors * Airbags * Wheel chocks * etc. Iodpfoyra Nzsx Acwotg Financing and leasing available We manufacture bodies of any size and type for any chassis. Tarpaulin, GRP sandwich, aluminum. Visit us at: Bodies - Complete vehicles - Trailers - Consulting - Financing Errors and prior sale excepted. No liability for typographical or entry errors.

Condition: new, power: 152 kW (206.66 HP), fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 6,300 mm, loading space width: 2,400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, ----IVECO DAILY 70C21HA8/P * German registration documents * Not registered * 2 years manufacturer warranty from Iveco * Gross vehicle weight: 7,200 kg * EURO VI * 8-speed automatic transmission * Factory-installed rear axle air suspension * Hydraulically suspended driver’s seat * Central locking with remote control * Radio with Bluetooth and navigation * Multifunction leather steering wheel * LED daytime running lights * LED headlights * Electric windows * Electrically adjustable exterior mirrors Flatbed superstructure: * Steel frame in C-profile * Approx. 630 x 240 cm * Aluminum loading ramps * Electric winch with wireless and wired remote control * Side underrun protection painted in vehicle color * LED light bar * Mudguards with mud flaps * Tow hitch with 3,300 kg towing capacity Load securing accessories also available from us: * Lashing and tie-down straps * Load bars * Safety vests * Transport boxes * Edge protectors * Airbags for load securing * Wheel chocks * Etc. Iodpfx Acsyra Nuswetg Financing and leasing available We manufacture bodies of all types and sizes for any chassis. Tarpaulin, GRP sandwich, aluminum. Visit us at: Bodies – Complete vehicles – Trailers – Consulting – Financing Errors and prior sale excepted, no liability for typographical or input errors.

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm Isdpfxsyt Nm So Acwetg MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Condition: new, mileage: 6 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, German new vehicle: * Euro 6E * 6-speed gearbox * Gross vehicle weight: 3,500 kg * ABS + ESP + ASR * Driver airbag * Cruise control * Driver’s suspension seat * Dual passenger bench seat * 10-inch navigation system + DAB with touchscreen * Apple CarPlay / Android Auto * Central locking with remote control * Electric windows * Reinforced rear axle suspension * All-weather tires Body: * Internal dimensions approx. L x W x H = 410 x 210 x 230 cm * Payload: approx. 1,000 kg * DHOLLANDIA DH-LM08 tail lift, 750 kg lifting capacity * LED interior lighting with switch * 2x combination lashing rails per side * External walls 25 mm * Roof 25 mm * Floor: 15 mm multiplex panel Load securing equipment is also available from us: * Lashing and tensioning straps * Load bars * Safety vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * Etc. Financing and leasing available We build bodies of any size and design on any chassis. Flatbed/tarpaulin, GRP sandwich, aluminum Visit us at: Vehicle bodies - Complete vehicles - Trailers - Consulting - Financing Iodpsw D Nwtofx Acwstg Errors and prior sale excepted; no liability for misprints or input errors.

Condition: used, first registration: 07/1980, color: grey, gearing type: mechanical, suspension: other, , Otto Klein water barrel vacuum barrel capacity 4.000 l year of construction 1980 suction hose pump overhauled hydraulic opening/closing immediately ready for use FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS IN SECOND PLACE For further questions please contact Mr. Faller at the number. //*EXCHANGE, PAYMENT ACCEPTANCE OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Itjdpfxjt Aikue Acwjg

Condition: used, module Diameter mm boring diameter mm Drawer cabinet with 52 Rack Milling Cutter Mod. 0.7-10 single and multi-barreled Isdpfxjd Il Iqe Acwjtg 124 hobs Mod.0.3-2.5 40 worm wheel cutter Mod. 0.3-2.5

Condition: good (used), Year of construction: 2004, operating hours: 63,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, Type: Engel Victory 500/120 Phoenix Iedpfx Aceymn Injwjtg Year: 2004 Screw ø: 35 & 40 mm (Extra screw & barrel from 2021) Shot volume ccm: 193 & 251 Operating hours: approx. 63,000 h Complete line: – Robot: Wemo 8-5 3S, Year 2003 – Conveyor belt, Crizaf – Color doser, Moretto – 2 pcs. temperature control units, Regloplas – Extra screw & barrel

Condition: new, mileage: 5 km, power: 107 kW (145.48 HP), fuel type: diesel, empty load weight: 2,380 kg, maximum load weight: 1,120 kg, overall weight: 3,500 kg, wheelbase: 3,682 mm, color: white, number of seats: 3, loading space length: 3,800 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, all-season tires, electronic stability program (ESP), onboard computer, New vehicle - net price € 43,680.00 plus 19% VAT Renaul Master 3500kg L2 Energy Blue DCI Euro6 Ijdpfx Aeumubaocwetg New vehicle platform chassis incl. box body in white Mileage 5 km Fuel Diesel kW/hp 107/145 Manual gearbox 6 gear ccm 2,299 cm³ 3500kg Driving license class B Mileage 10 km Platform chassis, particulate filter, air conditioning, cruise control, daytime running lights, reversing camera, all-season tires, ESP, ABS, on-board computer, heated mirrors, electric windows, central locking with remote control, emission class (NFZ): Euro 6, COC papers. Sales body made of GRP Superlight in sandwich construction with alcove and a large sales hatch across the entire width of the vehicle on the right. 3-seater, driving license class B, rear running board, LED lights, reversing camera, non-slip industrial floor R11. Various platform chassis are available (Fiat, Citroen, Peugeot, Renault). Box body interior dimensions WD 3800 x 2250 x 2300 mm Side flap 3570 x 1480 mm Permissible total mass 3,500 kg / driving license class B Unladen weight 2,380 kg Interior fittings and paintwork on request. Perfectly suited for a food truck, sales van, snack van, promotion etc. Price: 43.680,00 Euro net plus VAT We offer you customized lightweight box bodies on new or used chassis in various body lengths. The body and interior fittings are always customized to your individual requirements, from function to design. We produce ourselves and in Germany. Our many years of experience and our wide-ranging service offer you a lot of flexibility in the realization of your idea. Every project has its own ID. For more information visit our website

Condition: excellent (used), Year of construction: 1999, operating hours: 48,400 h, 1.0 used blow molding machine Manufacturer: Fischer - W. Müller Model: FMB 3-120 Year: 1999 Clamping force: 120 tons Iedpsynutmofx Acwetg Extruder type: 120/24 WT Accumulator head: BFKS25 (approx. 17.75 kg) This machine is capable of producing barrels up to 200 liters in size. Video available!

Condition: used, maximum load weight: 22,550 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 09/2019, loading space length: 13,520 mm, loading space width: 2,480 mm, loading space height: 3,045 mm, Year of construction: 2019, Equipment: ABS, VEHICLE NUMBER: BJO530 ----* Exterior features: * Step-frame jumbo semi-trailer, cranked design * Spare wheel holder (13mm tread depth) * Plywood box body, Aeroform version * Rear doors, passage width: 2,470mm, height: 3,010mm * Side door at front right with comfort access * Side flaps 4000mm x 1650mm, electrohydraulic operation * GRP (fiberglass) skylight * Electrical system 380 V with power inlet socket ----* Technical specifications: * SAF axles with drum brakes * Tires: 245/70 17.5 twin wheels * Tread depth in mm: 1st axle: 13/13/13/13, 2nd axle: 13/13/13/13 * Interior lighting * 230V outlets * Sales counter * Cabinet system * Drawer system for small parts storage * Load compartment length: lower deck 9,445mm, platform 4,100mm * Step lower deck to platform: 300mm * Interior height: lower deck 3,045mm / platform 2,745mm * Unladen weight: 6,450kg * Coupling height: 1,150mm ----* Hire purchase example: €449 monthly rate, term: 60 months, 10% down payment (your current vehicle can also be accepted), 10% final installment. Iodpoymuk Njfx Acwotg * Delivery to your location possible. Trade-in / Leasing / Financing. We make it possible!