Used Chereau Gruppo Thermoking A-400 for sale (78,654)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space height: 900 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Low-bed semi-trailer chassis Steel welded construction Turntable with heavy-duty ball bearing ring Folding rear outriggers 2 support wedges with holder Aluminum side impact protection Rear splash guards covering the entire width Semi-fender for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approximately 1800 mm long, approximately 650 mm wide and approximately 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess, laterally on the longitudinal frame, approximately 300 mm from the front and approximately 200 mm in front of the rear slope 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included) 1 storage box recessed in the gooseneck at the bottom with lid, W=720 mm/ L=520 mm / D= 170 mm Extendable widening elements to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Storage compartment for wooden planks under the loading platform Lashing eyes for low-bed trailer (40 lashing options) 1 pair of lashing eyes on the gooseneck, each 5 tons 9 pairs of lashing eyes embedded above and on the side in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing eyes in the outer frame from the low bed, each 5 tons (for attaching tie-down straps) 3 pairs of folding lashing eyes additionally, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (protruding) 1 x behind the last axle, recessed in the floor Coupling device for the trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined by 8° / D-value min. 160 kN Axles + Suspension Gkedpfei Ri Daex Afujc Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker equalization) Wheels and Tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning signs double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel / checkered plate covering followed by 70 mm softwood floor, wheel arch area with steel / checkered plate covering Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left-hand side at the front Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Country of Registration / Signs Country of Registration: Germany 24/7 Service Hotline prepared for two-line license plate holder Contour marking with reflective strips ac

Condition: used, mileage: 3,450 km, power: 170 kW (231.14 HP), first registration: 06/2015, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, emission class: euro3, Year of construction: 2015, Equipment: ABS, air conditioning, all wheel drive, compressor, Unimog U 400, two-way conversion, like new condition approx. 3,500 km and 180 operating hours Manufacturer: Wagon braking system, 800 tons Coupling rod mount, front and rear Theimeg remote control Derailment sensors Gkodpfxoi R Ah Ue Afujc

Condition: used, mileage: 400,000 km, power: 294 kW (399.73 HP), first registration: 08/2014, fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: automatic, loading space length: 5,900 mm, loading space width: 2,350 mm, loading space height: 900 mm, Year of construction: 2014, Equipment: ABS, air conditioning, crane, Scania P 400 / 8x4 TIPPER 5,90 m + BORDMATIC Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2014 ? MILAGE: 400 000 km Gsdpsvi Durefx Afuekc EQUIPMENT: ? ABS ? EL. WINDOWS ? POWER STEARING ?POWER STEERING ? TACHOGRAPH CAPACITY: 20 000 kg TOTAL WEIGHT: 34 000kg WHEELBASE: 195/235/138 cm TIRE SIZE: 315/80R22,5 SUSPENSION: SPRING TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 76474

Condition: used, Year of construction: 1991, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Novenco, dust extraction fan radial fan type CNA-400 REX / AZG-S Gsdstz Hu Iopfx Afujkc -Engine: 1.35 kW 955 rpm -Volume flow: 5000 m³/h -Connection: inlet Ø 400 mm -Connection: Output 390 x 280 mm -Dimensions: 1030/590/H800mm -Weight: 70 kg

Condition: new, Year of construction: 2026, NEW ON THE POLISH MARKET 230 V screw compressor Screw compressors from the Polish brand CORMAK are a guarantee of quality and reliability. Our several years of experience in selling compressors has allowed us to create models with an excellent price-quality ratio. The presented model is perfect for small workshops or small manufacturing companies. It is characterized by high efficiency (380 l / min) in relation to its dimensions, which allows you to operate several devices at the same time. Very low noise level (60 dB) makes staying in the same room not inconvenient. Thanks to the high-quality components used, the compressor is designed for continuous operation and can be used in industry. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision workmanship. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Efficiency optimization: Thanks to inverter technology and intelligent algorithms, the LUFT 400 dynamically adjusts energy consumption to the current demand for compressed air. This means a significant reduction in operating costs while maintaining maximum efficiency. Proven drive system: The LUFT 400 compressor uses a reliable direct drive that minimizes loads on the screw block and engine, ensuring efficient operation and long service life. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. Godetz S H Nspfx Afuekc Technical parameters Engine power 3.0 kW / 4 HP Voltage 230V/50Hz Efficiency 0-6 bar average 400 L/min Efficiency at 6 bar 390 L/min Capacity at 8 bar 380 L/min Capacity at 10 bar 380 L/min Outlet port diameter (G) 1/2" Dimensions 800 x 520 x 740 mm Weight 95 kg Manufacturer: Cormak

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Gksdpfxjt Hw S Uo Afuec Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures Gedpfxefcd Iks Afuokc -Total length: 400 mm -Total height: 99 mm -Price: per piece -Number: 2 pieces -Weight: 9.7 kg

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm turning length: 1500 mm control: Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Gkodpfeyv Dnkox Afuoc Conveyor belt for finished parts. Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. *

Condition: used, Year of construction: 2018, Suitable for (model): U 400 We are offering for sale here: 2 pieces of wheels 10 bolt holes for Mercedes Benz Unimog U 400 385/65R22.5, retreaded, cold recapped, 160 K, with siped tread pattern. Tread depth approx. 80-90%. Gksdpeyq Ar Njfx Afuoc If you have any further questions, please feel free to contact us. Location: 94491 Hengersberg

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, loading space length: 7,145 mm, loading space width: 2,750 mm, loading space height: 900 mm, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Godpfx Afeyxq A Heuskc Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: ready for operation (used), functionality: fully functional, The Wolfking TSM400 Mixer is engineered to meet the demands of high-throughput food processing lines. From the moment it is commissioned, it delivers a homogeneous and consistent mix, directly improving the quality of the final product. As such, it is ideally suited to facilities processing fresh meat, processed meat, or complex preparations requiring precision and consistency. Thanks to its double-shaft mixing system, the Wolfking TSM400 ensures even distribution of ingredients right from the initial stages of the cycle. This technology prevents unmixed zones while optimizing the incorporation of spices, additives, or marinades. As a result, manufacturers benefit from a more stable product and reduced material losses. Additionally, the option to integrate a CO₂ cooling system enables temperature control during mixing, further enhancing overall quality. This machine also stands out for its robustness and its ability to operate continuously. It is easily integrated into existing processing lines, whether upstream of a grinder or a forming stage. Its design allows for efficient cleaning, minimizing downtime and increasing production availability. As a refurbished, pre-owned solution, it offers a cost-effective way to optimize expenses while maintaining high performance levels. Finally, the Wolfking TSM400 Mixer helps stabilize production rates. In this way, it increases productivity while ensuring consistent quality, making it a strategic asset for demanding manufacturers. ⚙️ Technical specifications Bowl capacity: 400 L Gsdpfxjyzqzzs Afuokc Mixing type: dual ribbon shaft Dimensions: 2000 × 1650 × 2700 mm Loading height: 1500 mm Power supply: 380 – 400 V Frequency: 50 Hz Power: approx. 6 kW Current: approx. 15 A

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron type HSM 400 U The machine is defective and is being sold for spare parts. Gkedpfx Aeyzt A Uofujc Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, functionality: fully functional, empty load weight: 583 kg, maximum load weight: 2,117 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,110 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Plateau 400/2 2.7T NEW VEHICLE Godpfx Afsxp U A Ajuokc Internal dimensions: 406 cm x 211 cm Gross weight: 2,700 kg Payload: 2,117 kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2 x 1,350 kg axles and brakes with automatic reverse function Low-profile chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail compartment Support load Multiple tie-down lashing points along the entire length Reinforced 10" C-grade tires with steel valve M+S (mud and snow) tires 13-pin connector Front marker lights Rear lamps with reversing light, fog light, and triangular reflectors Lamps and license plate holder are foldable Winch with brake and bracket 2 x wheel chocks 15 mm thick, durable, anti-slip phenolic plywood floor OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Full LED lighting - Anti-theft device - Swap steel track for aluminum track - Swap 10" tires for 13" tires - Wheel stops - Foldable rear support cranks - Anti-sway coupling - Side railing - 30 cm aluminum side panels - 30 cm aluminum extension side panels - 150 cm high tarpaulin - Full-width wheel stop Additional accessories available on request! Plus freight to Gera and vehicle registration certificate: €250 net Images are for illustration purposes and may show optional accessories at extra cost. Haven’t found the right trailer yet? We have 50–100 vehicles in stock, available immediately for pickup. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravans. We also offer a large selection of spare parts and accessories for trailers from various manufacturers. We also have a wide range of rental trailers available. Visit us online or stop by in person!

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min Gjdpfxex Aqdcs Afujkc No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, Year of construction: 2022, operating hours: 300 h, functionality: fully functional, power: 100.03 kW (136.00 HP), overall weight: 5,500 kg, fuel type: diesel, The BBT 400 Woodzilla is a 360° rotatable, compact, powerful, mobile drum chipper with aggressive feed, mounted on a truck trailer chassis. Technical Data Year of manufacture: 2022 Operating hours: approx. 300 hrs Drive: Diesel, Deutz TCD 3.6, 100 kW (136 HP), Stage 5 Feed opening: 320 x 500 mm Chipping drum: 400 x 500 mm, 4 knives Max log diameter: 32 cm Infeed table length: 1300 mm Support: 4-way hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chipper and crane Trailer towing eye: 40 mm Brake: Air brake system, Duomatic 2 additional feed rollers The machine is in like-new condition. Location: NRW Availability: by arrangement Gkjdpfx Asx Ektxefuec Warranty: The machine is sold in the condition it is in at the time of handover. The seller assumes no liability for defects. We reserve the right to prior sale, modifications and repairs. Didn't find what you're looking for? Then contact us!

Condition: ready for operation (used), Schneider Electric ELAU PacDrive MC-4/11/22/400 SN: 2228230262 – the metal housing is slightly deformed in one area and one mounting point of the fan is damaged, see photo; used, in good condition, 100% functional, delivery as per photos. Gksdpox Euckefx Afusc

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Nitrogen hood IR preheating Single soldering nozzle 3 solder frames Software, etc., manual Gjdpfx Aexzrflsfuskc Tool, spare parts box New timing belt, new impeller for drive installed

Condition: used, mileage: 764,000 km, power: 294 kW (399.73 HP), first registration: 04/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space volume: 52 m³, loading space length: 8,250 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Equipment: ABS, air conditioning, tail-lift, Iveco Stralis 400 Refrigerated Box Van, Carrier Retarder, LBW, Euro 6 Internal No. for inquiries: 1125886 * Condition: very good * Power: 400 hp / 294 kW * Engine displacement: 8,710 cm3 * Retarder * ABS * EBS * Differential lock, rear axle * Emission standard EURO 6 * Exterior mirrors, electrically adjustable and heated * Power windows * Air-sprung comfort driver's seat * CD radio * Transparent sun visor * Roof spoiler * Storage box on the right side / plastic * Work lights Tail lift: Bär, load capacity up to max. 1,500 kg Body: Refrigerated box van * Body manufacturer: Lamberet * Refrigeration unit: Carrier Supra 1250 Mt° Dimensions of the cargo space/loading area: Length: 8,250 mm, Width: 2,500 mm, Height: 2,500 mm Gksdpfx Ajxzwahefuoc Tires: Front axle: 315 / 70 R22.5, leaf-sprung / 35% Rear axle: 315 / 70 R22.5, air-sprung / 45% ----Price: 19,900 Euros + 19% VAT For further questions, you can reach us at the following telephone numbers: * We speak: German, English, French, and...? Typographical errors, errors and prior sale are subject to change.

Condition: used, mileage: 291,050 km, power: 120 kW (163.15 HP), first registration: 12/2020, fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 6,850 mm, total height: 3,250 mm, loading space length: 3,450 mm, loading space width: 2,050 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Internal Vehicle No.: 4163 ----Why autonext? Over 400 immediately available cars & commercial vehicles One of the largest vehicle exhibitions in the region Over 1,000 satisfied customers annually - Top customer ratings Attractive financing & trade-in options Entire vehicle selection available at autonext ? Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99 % ### ----1st hand, German vehicle, Non-smoker vehicle Complete service history, exclusively at Mercedes Benz Next service in 599 days Like-new rear brakes Body: Maxi freezer box ThermoKing cooling unit V500 MAX (-20°Celsius) Refrigerant R-404A/ R-452A Standby cooling + engine cooling Optionally, we offer you a cooling service from the manufacturer for only 899,- Euro. Hydr. tail lift Payload 2,030 kg Permissible total weight 5,500 kg Twin tires on the rear axle Rear view camera Lane keeping assist Multimedia system MBUX (touchscreen 7") Navigation system for multimedia system MBUX Regulated air conditioning (Tempmatik) ---- Special equipment: * Multimedia system MBUX (touchscreen 7") * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot in front under the dashboard, passenger side * 2nd battery (auxiliary battery) in the interior * Acoustic package * Exhaust pipe in front of the rear axle, left * DAB tuner (digital radio reception) Gkedpfx Afsx Rfh Ueusc * Vehicle without start/stop system * Generator 250 A * Speed limiter 90 km/h * Connection strip for electrical connections (driver's seat box) * Regulated air conditioning (Tempmatik) * Fuel filter with water separator * Front engine drive with support for additional coolant compressor * Navigation system for multimedia system MBUX * Windshield wipers with rain sensor * Seats in the cab: driver's seat plus (with flat seat surface) * Separating relay for additional battery * Reinforced front axle Standard equipment: Storage compartment above the front windshield, Adaptive brake light, Airbag driver side, Anti-lock braking system (ABS), Anti-slip regulation (ASR), Drive type: Rear wheel drive, Display for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Outside temperature display, Roof lining in the cab, Automatic switching on of headlights, Electronic brake force distribution (EBV), Electronic stability program (ESP), Driving assistance system: active brake assistant, Driving assistance system: crosswind assistant, Driving assistance system: lane keeping assist, Digital tachograph, Suspension: Stabilization Level II, Power windows electric 2-fold, Transmission 6-speed - TSG (Eco Gear), Body/superstructure: Standard platform, Keyless start, Communication module (LTE) for digital services, Fuel tank: Main tank 71 liters, Steering wheel (steering column mechanically adjustable), Headlamp range control, Truck approval, Marking lights on the side, Mercedes-Benz emergency call system, Engine 2.1 L - 120 kW CDI CAT, Particle filter, Wheelbase 4325 mm, Low emission according to emission standard Euro 6, Safety belt system with warning system (driver side), Seat cover / upholstery: fabric, Seats in the cab: passenger seat with armrest, Seats in the cab: passenger seat adjustable, Seats in the cab: driver's seat with armrest, Daytime running lights, Underrun protection rear, Fleece battery 92 Ah, Maintenance interval display Assyst, Immobilizer, Heat protection glazing (windshield with band filter at the top), Central locking with remote control, Permissible total weight 5.00 t. ----HU/AU

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track Gkedpfx Afox Tdmusujc - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Godsx Tdnxjpfx Afuokc Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track Gkodsx Tdn Sjpfx Afuec - Excl. chain - Excluding pump(s)

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Robot WITTMANN W818-2558 (2013) Gsdpfxsyab R Ns Afuokc

Condition: used, Gebr. Zaugg AG Snow Plough SP200-400-5 Snow Blade Width: 4000 mm Price: €3,900 + 19% VAT. Gjdpfx Afew Dwxxsuskc For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish, and ????? Subject to typing errors, mistakes, and prior sale.

Condition: used, Year of construction: 1991, - Drilling diameter: 3–10 mm (optionally up to 22 mm) - Drilling depth: Max. 70 mm - Spindle distance: Adjustable from 45 mm to 540 mm - Hole spacing: Min. 3 mm, Max. 800 mm Gkodpfx Afowv D Hajuec - Table size: 98 x 60 cm - Additional features: Drill length compensation, cooling/lubrication, speed control