Used Collating Systems for sale (43,284)

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 84,893 h, machine/vehicle number: A0420A0151, control type: CNC control, controller manufacturer: Siemens, controller model: Siemens Sinumerik 840D (TRUMPF MMC), laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF 3200, laser hours: 32,832 h, laser power: 3,200 W, type of cooling: water, year of last overhaul: 2019, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, TRUMPF Trumatic Lasercell 1005 – 3D Laser Welding System (3.2 kW) Used, ready-to-use 3D laser welding system (Type TLC 1005) Special modification for 3D laser welding (adapted beam guidance) Laser cutting is not possible in the current configuration Special version with a powered rotary table for highly precise round and multi-sided processing Basic data & performance: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Nlsdpfjz Rzikex Ac Doh Model: Trumatic Lasercell 1005 (Type TLC 1005) Year of manufacture: 2005 Laser power: 3,200 W (Resonator TRUMPF TLF 3200) Serial number: A0420A0151 Connected load: 68 kVA Operating hours: Processing time (beam on): approx. 32,832 h (pure welding time with active laser beam) Operating time (laser on): approx. 84,893 h (total operating time of the resonator incl. standby) Condition, scope of delivery & history: Scope of delivery includes cooling unit (chiller) and Herding dust extraction/ventilation system (Type DELTA 1200-12/9 SC, year 2004) The system was taken over from a VW plant in 2019 Professional installation, technical commissioning and inspection carried out by GIMTAS in September 2019 Sale & processing: On-site inspection possible after prior arrangement Price negotiable Dismantling and transport preferably carried out by the buyer

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 43 m³/h, filter area: 43 m², Equipment: CE marking, documentation/manual, a SCHUKO dust extraction system with 5 metal containers and a 43 m³ filter area; can also be sold as a complete set including the entire installation. Nsdpfxszzzg Se Ac Djlh

Condition: new, Available on request! Europe-wide delivery! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Standard roll-off container 6.5 x 2.38 x 2.4 = 37 cbm Including folding net system! “semi-automatic” operation The net can be fully opened and can also remain open while driving! Other sizes available on request. Container interior length from 4 to 7.0 m possible. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Bottom: 5 mm Walls: 3 mm Cross member: INP 180 Transition from bottom to wall is rounded. Mounting bracket Ø 50 mm, hook height 1,570 mm Nljdjzhpizepfx Ac Dsh -End profile made of round tube -Door latch Model Holland + -Lateral central latch -All-round tarpaulin and net hooks -Steps welded onto the front -Primed once inside, double-coated outside -Double-coated outside in a single desired RAL color Optionally available on request: -Side advertising panels -Steel quality according to specification s235, s355, hardox -DIN 30722-2 -> 22,000 total weight -Spar spacing 50 cm -Cross spars -Mounting bracket Ø 60 mm -Roller cover -Steel cover with winch / hydraulics -Net system for covering / load securing -Ladder on the rear door -Additional spars / belly band -French flap -Swing flap -Grain slide What sets us apart from others? -Robot-welded component groups -All weld seams continuous on the spars -All containers are bead-blasted -Double-primed -Double-coated -All containers have type plates and valid UVV testing.

Year of construction: 2002, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V02SC0039, System Ceramics Spa – EASYLINE F50V60 (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: EASYLINE F50V60 Condition: Used – fully refurbished Status: In good working condition Nedpez Df Ucjfx Ac Dslh Automatic system designed for checking the dimensional quality of tiles and subsequent boxing. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: excellent (used), operating hours: 12,705 h, axle configuration: 4x4, power: 265 kW (360.30 HP), fuel type: diesel, first registration: 06/2008, color: other, tire condition: 80 %, number of seats: 2, gearing type: automatic, Equipment: air conditioning, = Additional options and accessories = - 1 fuel tank - ABS - Armrest - Day Cabin - Hub Reduction - Hydraulics - PTO Njdpfx Ajz Rzhyjc Delh - Radio - Sper - Thick Axles = More information = General information Year of construction: 2008 Cab: day Technical information Engine capacity: 7.145 cc Drivetrain Drive: Wheel Axle configuration Brakes: drum brakes Front axle: Differential lock; Steering; Tyre profile: 80%; Reduction: hub reduction Rear axle: Double wheels; Differential lock; Tyre profile: 70%; Reduction: hub reduction Weights Empty weight: 10.000 kg Carrying capacity: 3.350 kg GVW: 13.350 kg Max. towing weight: 40.000 kg Functional Quick coupler system: Yes Condition Technical condition: very good Visual appearance: very good Financial information Ask about the lease options

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Nlodpez Srm Nsfx Ac Deh Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, Balance Systems Digital Interface Balancer 9SHVM2512B N220, circuit board, serial number B803704, unused, 100% functional, scope of delivery as shown in the photos. Nledpji D T Dgofx Ac Deh

Condition: used, Year of construction: 2023, Manufacturer: TEKA, Type: ZPF 9H, Year of manufacture: 2023, Serial no. A22341310061001, 22 kW, Exhaust/piping system, Dust collection container, Welding fume class W3 Nlsdpfx Acsz Tn Edj Doh +++ Subject to prior sale! +++ +++ Attention: This unit is part of an online auction! +++

Condition: used, For sale is a used floor conveyor system from Louis Schierholz GmbH, taken from the oven areas of an industrial wheel painting line. The conveyor technology offered is for the transport of vehicle wheels or aluminum rims. The original design documents from Widmer+Ernst / VGT AG date back to 1998. This date refers to the design status; the actual year of construction of the conveyor system was 1999/2000. A precise model designation is not currently known. Information from the design documents: - Conveyor speed: 1.6 m/min - Primer oven: 59 m conveyor length - Primer drying oven: 40 m conveyor length - Primer baking oven: 80 m conveyor length - Clear coat baking oven: 64 m conveyor length - Total length of originally documented oven conveyor sections: 243 m Nodpfs Aar Tdsx Ac Dslh The 243 m is a design specification and not a guaranteed delivery quantity. It is not certain whether all rails and components of the original sections are still available. The actual quantity available and the definitive scope of delivery will be determined and agreed upon jointly during an inspection prior to purchase. The system is designed as a floor-mounted rail guidance system with straight and curved sections, as well as vertical workpiece carriers. The offer includes the rail system, the chain and the tool carriage, as well as the tool holder. Control and drive systems are not part of the offer. The exact scope of the available parts will be determined during the inspection prior to purchase. Location: 36381 Schlüchtern. Price upon request.

Condition: new, Spray nozzle GEKA plus, plug-in system, version: blister pack · Plug-in system · Heavy-duty design · With rubber coating for easy handling and a pleasant feel Nlsds Ab Nxaopfx Ac Doh · Water flow continuously adjustable (full jet to spray mist) · Brass, nickel-plated · Supplied in a blister pack for self-service displays Type: GEKA plus plug-in system

Condition: new, Retractable belt barrier system, m.2, with 2 belt cassettes, D149xH1006mm, posts in red/white, belt in red/white. · Robust system for effectively, quickly, and extensively securing potential hazard areas or restricted zones. · Posts made of aluminum and belt cassettes made of E-material. Nodpfxj Acgwcs Ac Dslh Belt length: 2 x 22 m Width: 562 mm Weight: approx. 55 kg Housing color: red/white Belt color: red/white Height: 1006 mm

Condition: new, Retractable barrier system, model 2, with belt cassettes, D149 x H1006 mm, black/yellow posts, neon/yellow belt. · Robust system for effectively, quickly, and extensively securing potential hazard areas or restricted zones. Nedpfx Ae Acgw Nsc Dolh · Posts made of aluminum and belt cassette. Width: 562 mm Housing color: black/yellow Height: 1006 mm Belt color: neon yellow Belt length: 2 x 22 m

Condition: new, Up to 6 functions, consisting of: 00 E-joystick including housing with integrated shift knob and rocker switch 00 Nlods Abh T Nspfx Ac Djh Packaging quantity: 1 Packaging unit: piece

Condition: new, mechanical quick-change device for heavy-duty vehicles. Nlsdo Abnugopfx Ac Djh

Condition: new, The Kipp-Stop system from Holzknecht is an active safety device for forestry winches, designed to prevent typical accidents caused by tipping, overturning, or rolling over of forestry towing vehicles with radio-controlled winches. The Kipp-Stop system can be retrofitted to any electro-hydraulic winch. A wiring diagram showing the socket assignment is included in the operating manual, allowing the system to be connected to any radio system. Winches equipped with this Kipp-Stop system stop the cable pull at the following values: Laterally left/right: 15° (tolerance +/- 3°) In the direction of travel uphill: 25° (tolerance +/- 3°) In the direction of travel downhill: 35° (tolerance +/- 3°) The specified inclination limits of the winch must not be exceeded. If the pull function is interrupted by the Kipp-Stop system when the above values are exceeded, the winch must be brought to a position at least 3° below the limit values in order to reactivate the pull function. By briefly activating the pull function three times, the system is disabled, meaning that a single pull can be performed even outside the above-mentioned limits. Nledpj Abntvofx Ac Djh After that, the system is active again. The Kipp-Stop system can be retrofitted to any electro-hydraulic winch. However, this device cannot guarantee complete protection against overturning! In particular, improper positioning of the towing vehicle (extreme slope, loose ground, etc.), interference from electromagnetic fields, and improper installation of the winch or the Kipp-Stop system can impair the function. The shield of the winch must be exactly vertical when the winch is lowered to the ground. When the Kipp-Stop system is installed, no hydraulic top link may be used!

Condition: new, Diesel fuel tank system Basic 1000l, H1800xW1200xL800mm, with pump and dispensing nozzle, CEMO * Complete with electric pump 230 V and automatic dispensing nozzle with nozzle holder * 4 m filling hose * With integrated collection basin * With optical leak indicator * Length: 800 mm Width: 1200 mm Weight: 150 kg Flow rate: 56 l/min Capacity: 1000 l Njdpfxo Acq Uxo Ac Dolh Equipment: with pump and dispensing nozzle Height: 1800 mm

Condition: new, Basic diesel fuel tank, 2500 liters, H1800 x W1200 x L1800 mm, with pump and dispensing nozzle, CEMO · Complete with electric pump, 230 V, and automatic dispensing nozzle with nozzle holder · 4 m filling hose · With integrated collection basin · With optical leak indicator · B Width: 1200 mm Weight: 235 kg Njdpfxs Acq U Sj Ac Dslh Flow rate: 72 l/min Capacity: 2500 l Height: 1800 mm Equipment: with pump and dispensing nozzle Length: 1800 mm

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Condition: used Scope of delivery: (See picture) Nsdpfx Acszdn T Rs Djlh (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, KUKA Type: KR 10 R900 sixx / KRC4 KUKA industrial robot complete system Robot: KR 10 R900 sixx Controller: KRC4 including KUKA smartPAD, cable set and accessories For sale is a KUKA industrial robot as a complete system from a commercial inventory. The system is ideally suited for automation tasks in industry, laboratories, assembly, handling, pick-and-place applications, testing tasks, and general robot applications. The 6-axis robot is designed for precise and rapid movements and can be used for gripping, positioning, feeding, moving, and processing components. The system offered consists of a robot arm, KRC4 controller, smartPAD, cables, and other accessories as shown in the pictures. Technical data: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article No.: 10016515 Serial number: 500874 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Controller: KRC4 Article No.: 11019802 Serial number: 224377 Controller weight: 33 kg Controller connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A Total system weight (approx.): 90–110 kg Robot dimensions (approx.): Reach 901 mm Controller dimensions (approx.): compact KRC4 design Nodpsy Dt D Djfx Ac Delh Software / Display according to system: KRC SR version: V8.2.3 HMI version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options according to display: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Description / Functions: The robot can be used for handling and automation processes, e.g. for gripping, transferring, feeding, positioning or processing workpieces. The 6 axes enable flexible movement in space. The compact design and the reach of 901 mm make the system particularly interesting for confined working areas and automated production cells. Total system weight (including controller and accessories, approx.): 90 – 110 kg Condition: used visually with typical signs of wear the screen and system information can be seen in the photos the visual condition can be seen in the pictures Scope of delivery: (See picture) KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and linking cables other accessories as shown in the pictures Important: The images are the only basis for the scope of delivery. "The table shown in the photos is not part of the sale." Commercial sale (Changes and errors in the technical data, information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Krumm Tec CLEAN MATIC 3150 cleaning system for support material Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Nsdpfxezixy Se Ac Djlh Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, RMS RMS Control and Measurement Technology – Vibration testing system with accessories For sale is a high-quality set from RMS Control and Measurement Technology, as well as a fan from Rietschle, ideal for vibration testing, resonance tests, and material analysis. Included devices: RMS CONTROL AND MEASUREMENT TECHNOLOGY – Vibration exciter, type SW 6011, No. 2230 30 V – 200 A 13 mm / 1.2 m/sec / 100 g Mounting frame, type SWT 6211/1, No. 6074 – stable mounting for test objects Power amplifier, type TGE 10‑1/7 – for optimal control of the vibration exciter Rietschle SKG 410‑2.01 fan – high-performance vacuum/pressure blower Nlsdozikdcepfx Ac Doh Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Nsdpszgckcsfx Ac Djlh Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Iridex Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone. Nledpfxszd Ut Ro Ac Djh

Condition: used, DSM Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Fastening system Condition: used Scope of delivery: (See picture) Nlsdpfjzgabfsx Ac Deh (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, BÖLLHOFF Type: 9524-640-824-5 Nedpfszgaabjx Ac Djlh RIVSET Punch Rivet System with Punch Rivet Pliers Operating voltage: 400V 50 Hz Rated current: 12A Main fuse: 35 A Control voltage: 24 V Signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible riveting pressure: 250 bar max. permissible riveting force: 78 kN Weight of the pliers: approx. 279 kg Year of manufacture: 2012 The system was inspected by the manufacturer and is fully functional. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.