Used Collet Bfp 130 for sale (4,943)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Gedpey Hkfdsfx Alxoub Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Godpfoy Hkd Hsx Alxsub Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), For sale: professional tool holder from the renowned brand WNT Germany – model B40 ER16M A=100. The holder is equipped with a Centro-P Germany HPC16MS-DI precision collet, ensuring maximum accuracy and clamping stability. The set also includes a VHM drill, making it ready for immediate use on a CNC machine. Condition: very good, the holder is fully functional, no play, with normal signs of use. Premium-class equipment – ideal for professional machining centers where precision and reliability are crucial. Godpfx Alsw Rr A Djxoub

Condition: like new (used), I am selling a complete Yaskawe Motoman UPT 130 T robot. Gsdpfx Aeu Tk H Djlxsub

Condition: used, mileage: 18,643 km, power: 96 kW (130.52 HP), first registration: 10/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, next inspection (TÜV): 04/2026, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, The Renault Master 130 dCi L3H2 is a powerful and versatile commercial van that optimally combines efficiency, comfort, and reliability. Equipped with a 2,299 cm³ diesel engine and front-wheel drive, it handles even demanding transport tasks with ease, while the manual transmission ensures precise handling and complete control in every driving situation. With just 18,643 km on the odometer and first registration in October 2017, this vehicle is in an almost like-new condition and ready for immediate use. The thoughtfully designed shelving system makes optimal use of the cargo space, ensuring that tools, materials, or spare parts are always within easy reach and securely stowed. The air conditioning system guarantees a pleasant working environment, enhancing driver comfort and making productive work possible even during long operations. Godpfxexbuhps Alxoub Thanks to the existing COC (Certificate of Conformity) document, registration is straightforward, allowing the Master to be put into professional service without delay. This vehicle combines robust engineering, practical features, and high everyday usability—making it the ideal partner for trades, retail, or logistics, increasing efficiency, comfort, and safety in daily operations. Sale to business customers only (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 41,533 km, power: 96 kW (130.52 HP), first registration: 11/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, fuel: diesel, CO₂ emissions: 204 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Special features: Passenger-side airbag, Onboard computer, rear wing doors (opening angle 270 degrees), full wheel covers, high wood trim in the cargo/engine compartment Other features: Storage gallery, Driver-side airbag, electric exterior mirrors. adjustable and heated, outside temperature display, side marker lights, brake assist, tachometer, electric brake force distribution, driver assistance system: lane change warning system, 185 A generator, cabin filter: pollen filter, body/structure: high-capacity box, fuel tank: 105 liters, load compartment partition, height-adjustable steering column (steering wheel), model update, engine: 2.3 liters - 96 kW dCi diesel CAT, wheelbase: 4332 mm, smoker's package, low emissions according to Euro 6 emissions standard, gearshift indicator, sliding door loading/passenger compartment on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, lashing eyes on the load compartment floor, heat-insulating glazing, permissible Gross vehicle weight 3.50 t Equipment was determined using a VIN check; technical errors may occur here. Guedpfow Rg D Aox Alxeb CoC present. Equipment: - Truck registration - Wooden floor - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 8,919 km, power: 96 kW (130.52 HP), first registration: 10/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, fuel: diesel, CO₂ emissions: 204 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Special features: Passenger-side airbag, Onboard computer, rear wing doors (opening angle 270 degrees), full wheel covers, high wood trim in the cargo/engine compartment Other features: Storage gallery, Driver-side airbag, electric exterior mirrors. adjustable and heated, outside temperature display, side marker lights, brake assist, tachometer, electric brake force distribution, driver assistance system: lane change warning system, 185 A generator, cabin filter: pollen filter, body/structure: high-capacity box, fuel tank: 105 liters, load compartment partition, height-adjustable steering column (steering wheel), model update, engine: 2.3 liters - 96 kW dCi diesel CAT, wheelbase: 4332 mm, smoker's package, low emissions according to Euro 6 emissions standard, gearshift indicator, sliding door loading/passenger compartment on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, lashing eyes on the load compartment floor, heat-insulating glazing, permissible Gross vehicle weight 3.50 t Equipment was determined using a VIN check; technical errors may occur here. CoC present. Equipment: - Truck registration - Wooden floor - Partition wall Gusdpfow Dhzwex Alxob - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 71,892 km, power: 96 kW (130.52 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, next inspection (TÜV): 03/2027, fuel: diesel, CO₂ emissions: 204 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Special features: Passenger-side airbag, Onboard computer, rear wing doors (opening angle 270 degrees), full wheel covers, high wood trim in the cargo/engine compartment Other features: Gjdsxac U Iepfx Alxoub Storage gallery, Driver-side airbag, electric exterior mirrors. adjustable and heated, outside temperature display, side marker lights, brake assist, tachometer, electric brake force distribution, driver assistance system: lane change warning system, 185 A generator, cabin filter: pollen filter, body/structure: high-capacity box, fuel tank: 105 liters, load compartment partition, height-adjustable steering column (steering wheel), model update, engine: 2.3 liters - 96 kW dCi diesel CAT, wheelbase: 4332 mm, smoker's package, low emissions according to Euro 6 emissions standard, gearshift indicator, sliding door loading/passenger compartment on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, lashing eyes on the load compartment floor, heat-insulating glazing, permissible Gross vehicle weight 3.50 t Equipment was determined using a VIN check; technical errors may occur here. CoC present. Equipment: - Truck registration - Wooden floor - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 48,249 km, power: 96 kW (130.52 HP), first registration: 11/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, next inspection (TÜV): 01/2026, fuel: diesel, CO₂ emissions: 204 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Special features: Passenger-side airbag, Onboard computer, rear wing doors (opening angle 270 degrees), full wheel covers, high wood trim in the cargo/engine compartment Other features: Storage gallery, Driver-side airbag, electric exterior mirrors. adjustable and heated, outside temperature display, side marker lights, brake assist, tachometer, electric brake force distribution, driver assistance system: lane change warning system, 185 A generator, cabin filter: pollen filter, body/structure: high-capacity box, fuel tank: 105 liters, load compartment partition, height-adjustable steering column (steering wheel), model update, engine: 2.3 liters - 96 kW dCi diesel CAT, wheelbase: 4332 mm, smoker's package, low emissions according to Euro 6 emissions standard, gearshift indicator, sliding door loading/passenger compartment on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, lashing eyes on the load compartment floor, Gedpsxbuhiefx Alxjub heat-insulating glazing, permissible Gross vehicle weight 3.50 t Equipment was determined using a VIN check; technical errors may occur here. CoC present. Equipment: - Truck registration - Wooden floor - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 44,158 km, power: 96 kW (130.52 HP), first registration: 10/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, The Renault Master 130 dCi L3H2 is the perfect solution for anyone seeking a reliable, powerful, and immediately operational commercial vehicle. With its spacious L3H2 cargo bay, it offers impressive capacity, making even demanding transport tasks easy to handle. Whether for trades, as a service vehicle, or for logistics, this van adapts flexibly to your requirements and efficiently supports you in your daily business. The robust 130 hp diesel engine with a 2,299 cc displacement delivers confident power and economical fuel consumption. Thanks to Euro 6 emissions standard, the Renault Master is future-proof and can be used in low-emission zones without issue. The manual transmission ensures direct, controlled power delivery and a precise driving experience—ideal both for long journeys and urban use. With just 44,158 km on the clock and first registered in October 2017, this vehicle is in excellent, well-maintained condition and promises many more years of reliable service. The integrated air conditioning system ensures a pleasant driving environment, even on hot working days, and noticeably increases comfort on every trip. A particular advantage is the existing racking system, which efficiently organizes the cargo area and provides an immediate productivity benefit. Tools, materials, and spare parts are always within easy reach, speeding up workflows and minimizing unnecessary downtime. The COC document is available, allowing for straightforward registration. Guodpfxsxzld Ie Alxeb This Renault Master combines spaciousness, efficiency, and practicality in a compelling overall package. If you're looking for a ready-to-use professional commercial vehicle that impresses both economically and in terms of comfort, this model represents a sound choice that pays off day after day. Sale to business customers only (agriculture, freelancers, small and large companies) or for export. Subject to error and prior sale.

Condition: used, mileage: 20,492 km, power: 96 kW (130.52 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, fuel: diesel, CO₂ emissions: 204 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.9 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Special features: Passenger-side airbag, Onboard computer, rear wing doors (opening angle 270 degrees), full wheel covers, high wood trim in the cargo/engine compartment Other features: Storage gallery, Driver-side airbag, electric exterior mirrors. adjustable and heated, outside temperature display, side marker lights, brake assist, tachometer, electric brake force distribution, driver assistance system: lane change warning system, 185 A generator, cabin filter: pollen filter, body/structure: high-capacity box, fuel tank: 105 liters, load compartment partition, height-adjustable steering column (steering wheel), model update, engine: 2.3 liters - 96 kW dCi diesel CAT, wheelbase: 4332 mm, smoker's package, low emissions according to Euro 6 emissions standard, gearshift indicator, sliding door Godpfswrizbex Alxsub loading/passenger compartment on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, lashing eyes on the load compartment floor, heat-insulating glazing, permissible Gross vehicle weight 3.50 t Equipment was determined using a VIN check; technical errors may occur here. CoC present. Equipment: - Truck registration - Wooden floor - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 7,960 km, power: 96 kW (130.52 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, fuel: diesel, CO₂ emissions: 204 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Special features: Passenger-side airbag, Onboard computer, rear wing doors (opening angle 270 degrees), full wheel covers, high wood trim in the cargo/engine compartment Other features: Storage gallery, Driver-side airbag, electric exterior mirrors. adjustable and heated, outside temperature display, side marker lights, brake assist, tachometer, electric brake force distribution, driver assistance system: lane change warning system, 185 A generator, cabin filter: pollen filter, body/structure: high-capacity box, fuel tank: 105 liters, load compartment partition, height-adjustable steering column (steering wheel), model update, engine: 2.3 liters - 96 kW dCi diesel CAT, wheelbase: 4332 mm, smoker's package, low emissions according to Euro 6 emissions standard, gearshift indicator, sliding door Godpjw Rg D Nefx Alxjub loading/passenger compartment on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, lashing eyes on the load compartment floor, heat-insulating glazing, permissible Gross vehicle weight 3.50 t Equipment was determined using a VIN check; technical errors may occur here. CoC present. Equipment: - Truck registration - Wooden floor - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 67,757 km, power: 96 kW (130.52 HP), first registration: 11/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, next inspection (TÜV): 07/2026, fuel: diesel, CO₂ emissions: 204 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.9 l/100km, fuel consumption (combined): 7.2 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Special features: Passenger-side airbag, Onboard computer, rear wing doors (opening angle 270 degrees), Gjdpfowu Iicjx Alxoub full wheel covers, high wood trim in the cargo/engine compartment Other features: Storage gallery, Driver-side airbag, electric exterior mirrors. adjustable and heated, outside temperature display, side marker lights, brake assist, tachometer, electric brake force distribution, driver assistance system: lane change warning system, 185 A generator, cabin filter: pollen filter, body/structure: high-capacity box, fuel tank: 105 liters, load compartment partition, height-adjustable steering column (steering wheel), model update, engine: 2.3 liters - 96 kW dCi diesel CAT, wheelbase: 4332 mm, smoker's package, low emissions according to Euro 6 emissions standard, gearshift indicator, sliding door loading/passenger compartment on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, lashing eyes on the load compartment floor, heat-insulating glazing, permissible Gross vehicle weight 3.50 t Equipment was determined using a VIN check; technical errors may occur here. CoC present. Equipment: - Truck registration - Wooden floor - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 30,671 km, power: 96 kW (130.52 HP), first registration: 08/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, fuel: diesel, CO₂ emissions: 204 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Special features: Passenger-side airbag, Onboard computer, rear wing doors (opening angle 270 degrees), full wheel covers, high wood trim in the cargo/engine compartment Other features: Storage gallery, Driver-side airbag, electric exterior mirrors. adjustable and heated, outside temperature display, side marker lights, brake assist, tachometer, electric brake force distribution, driver assistance system: lane change warning system, 185 A generator, cabin filter: pollen filter, body/structure: high-capacity box, fuel tank: 105 liters, load compartment partition, height-adjustable steering column (steering wheel), model update, engine: 2.3 liters - 96 kW dCi diesel CAT, wheelbase: 4332 mm, smoker's package, low emissions according to Euro 6 emissions standard, gearshift indicator, sliding door loading/passenger compartment on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, lashing eyes on the load compartment floor, heat-insulating glazing, permissible Gross vehicle weight 3.50 t Equipment was determined using a VIN check; technical errors may occur here. CoC present. Equipment: - Truck registration - Wooden floor - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted. Gedpfxow Nzr Ej Alxsub

Condition: used, mileage: 13,919 km, power: 96 kW (130.52 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, The Renault Master 130 dCi L3H2 Euro6 is a used panel van ideal for commercial use. First registered in 2017 with a mileage of only 13,919 km, it offers reliability combined with minimal wear. The vehicle features an efficient 2.3-litre diesel engine delivering 131 HP and compliant with Euro 6 standards, ensuring low emission values. Finished in a bright yellow and equipped with a practical manual transmission, this transporter offers comfortable front-wheel drive. Its dimensions of 6,198 mm in length, 2,070 mm in width, and 2,475 mm in height provide ample cargo space, while the 4,332 mm wheelbase ensures stability. The cab is fitted with two seats and offers additional storage thanks to a COC shelving unit. An integrated air conditioning system maintains a comfortable climate even during warmer months. Viewings are available by prior arrangement, and a registration service is offered. Delivery within Germany is available at an extra charge. The Renault Master represents a reliable partner for economical and practical use alike. Gujdpfxow U E Dij Alxob Sale only to business customers (agriculture, self-employed, small and large enterprises) or export. Subject to prior sale and errors excepted.

Condition: used, mileage: 21,470 km, power: 96 kW (130.52 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, The Renault Master 130 dCi L3H2 is a versatile and high-performance commercial vehicle that perfectly combines comfort, efficiency, and reliability. With its powerful 2,299 cm³ diesel engine and front-wheel drive, it always delivers the necessary power for demanding transport and delivery tasks, while the manual transmission ensures precise driving and full control in any driving situation. With a mileage of just 21,470 km and first registration in September 2017, this Master is in an almost as-new condition and is immediately ready for use. The fitted shelving system provides optimal organization of the cargo area, keeping tools, materials, or spare parts always within reach and enabling a noticeably more efficient workflow. The integrated air conditioning system ensures a pleasant working environment even on hot days, enhancing driver comfort and supporting productivity throughout long shifts. Thanks to the available COC documents, registration is straightforward, allowing the vehicle to be put to professional use immediately. The Renault Master 130 dCi L3H2 combines robust engineering, thoughtful features, and exceptional suitability for everyday use, making it the ideal partner for trades, commerce, or logistics—delivering more efficient, comfortable, and safer operations daily. Godpfxsxw Inuj Alxjub Sale only to businesses (agricultural enterprises, freelancers, small and large commercial operations) or for export. Subject to prior sale and errors.

Condition: used, mileage: 121,544 km, power: 96 kW (130.52 HP), first registration: 07/2018, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, next inspection (TÜV): 09/2026, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2018, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, The Renault Master 130 dCi is the perfect solution for anyone who refuses to compromise in their daily work. With a compact length of 3 meters and a height of 2 meters, it combines impressive cargo capacity with outstanding maneuverability—ideal for urban driving, tight access roads, and efficient route planning. The powerful yet fuel-efficient 130-hp diesel engine meets the Euro 6 emission standard, ensuring strong performance with low emissions and future compliance in environmental zones. Inside, the Master proves itself as a true professional: The high-quality shelving system transforms the cargo area into a perfectly organized mobile workshop, saving time on every job and noticeably increasing daily productivity. The air conditioning ensures a pleasant, focused driving experience even on long working days—a comfort feature that quickly pays off. With 121,544 kilometers on the odometer and first registration in July 2018, this vehicle has already demonstrated its reliability and quality under real-world conditions. Gusdpfxoyg Rzks Alxob This Renault Master stands for efficiency, organization, and professionalism. Not only does it present an image of reliability, it also actively helps you get your work done faster, more systematically, and more successfully—an intelligent van that supports your business growth day by day. Sale exclusively to business customers (agriculture, freelancers, small and large commercial enterprises) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 27,341 km, power: 96 kW (130.52 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, The Renault Master 130 dCi L3H2 is a powerful and versatile van that ideally combines efficiency, comfort, and reliability. Powered by a robust 2,299 cm³ diesel engine with front-wheel drive, it handles demanding transport tasks with ease, while the manual transmission ensures precise driving and full control in any situation. With just 27,341 km on the clock and first registered in September 2017, this Master is in near-new condition and ready for immediate use. The fitted shelving system keeps tools, materials, and spare parts safely and conveniently organized, making workflows significantly more efficient. The air conditioning ensures a pleasant working environment and increases comfort even on long assignments, allowing for productive operation at all times. Gusdpfxsw U E A Ss Alxeb The existing COC (Certificate of Conformity) document enables straightforward registration, allowing the vehicle to be put into professional use immediately. The Renault Master 130 dCi L3H2 combines robust engineering, practical equipment, and everyday usability, making it the ideal partner for trades, commerce, or logistics—helping to make everyday work more efficient, comfortable, and safe. Sale exclusively to businesses (agriculture, self-employed professionals, small and large enterprises) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 14,030 km, power: 96 kW (130.52 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, The Renault Master 130 dCi L3H2 is a powerful and versatile van that combines efficiency, comfort, and reliability to perfection. Equipped with a 2,299 cm³ diesel engine and front-wheel drive, it delivers the necessary performance to handle even demanding transport tasks with ease, while the manual transmission ensures precise driving and full control in every situation. Guedpfxsw U E Dps Alxob With only 14,030 km on the clock and first registered in September 2017, this vehicle is in almost as-new condition and ready for immediate use. The fitted shelving system organizes the cargo area efficiently, so tools, materials, or spare parts are always securely stored and within easy reach. The air conditioning system provides a pleasant working environment, ensuring comfort even on long jobs and supporting productive work at all times. Thanks to the available COC document, registration is straightforward and quick, so the Master can be put into professional operation without delay. This vehicle combines robust engineering, well-thought-out features, and high everyday practicality, making it the ideal partner for trades, commerce, or logistics. It considerably eases daily workloads while remaining reliable and economical. Sale exclusively to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Condition: used, mileage: 23,926 km, power: 96 kW (130.52 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, fuel: diesel, CO₂ emissions: 204 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Special features: Passenger-side airbag, Onboard computer, rear wing doors (opening angle 270 degrees), full wheel covers, high wood trim in the cargo/engine compartment Other features: Storage gallery, Driver-side airbag, electric exterior mirrors. adjustable and heated, outside temperature display, side marker lights, brake assist, tachometer, electric brake force distribution, driver assistance system: lane change warning system, 185 A generator, cabin filter: pollen filter, body/structure: high-capacity box, fuel tank: 105 liters, load compartment partition, height-adjustable steering column (steering wheel), model update, engine: 2.3 liters - 96 kW dCi diesel CAT, wheelbase: 4332 mm, smoker's package, low emissions according to Euro 6 emissions standard, gearshift indicator, sliding door loading/passenger compartment on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, lashing eyes on the load compartment floor, heat-insulating glazing, permissible Gross vehicle weight 3.50 t Equipment was determined using a VIN check; technical errors may occur here. CoC present. Equipment: - Truck registration - Wooden floor Gusdpow Dhz Dsfx Alxeb - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 17,279 km, power: 96 kW (130.52 HP), first registration: 11/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, next inspection (TÜV): 06/2026, fuel: diesel, CO₂ emissions: 204 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Special features: Passenger-side airbag, Onboard computer, rear wing doors (opening angle 270 degrees), full wheel covers, high wood trim in the cargo/engine compartment Other features: Storage gallery, Gjdpsw Rg Egsfx Alxoub Driver-side airbag, electric exterior mirrors. adjustable and heated, outside temperature display, side marker lights, brake assist, tachometer, electric brake force distribution, driver assistance system: lane change warning system, 185 A generator, cabin filter: pollen filter, body/structure: high-capacity box, fuel tank: 105 liters, load compartment partition, height-adjustable steering column (steering wheel), model update, engine: 2.3 liters - 96 kW dCi diesel CAT, wheelbase: 4332 mm, smoker's package, low emissions according to Euro 6 emissions standard, gearshift indicator, sliding door loading/passenger compartment on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, lashing eyes on the load compartment floor, heat-insulating glazing, permissible Gross vehicle weight 3.50 t Equipment was determined using a VIN check; technical errors may occur here. CoC present. Equipment: - Truck registration - Wooden floor - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Console machine (6 units) Travel dimensions: X = 3490 mm Y = 1690 mm Guodpfx Alsy Ih Rmoxob Z = 205 mm Machining dimensions: X = 3050 mm Y = (Max. milling dimension - tool radius) 1345 mm Z = 150 mm Drilling head TF 20 Power: 2.2 kW 8 vertical spindles, spindle spacing 32 mm in X 6 vertical spindles, spindle spacing 32 mm in Y 2+2 horizontal spindles in X 1+1 horizontal spindles in Y with integrated grooving saw blade 120 mm with electro-milling spindle 9.2 kW with ISO-30 interface with C-axis with angle aggregate with 12-position tool changer with tool change station for angle aggregates with vacuum pump 80-100 m³/h Total connected load: 16 kW Compressed air: 6 bar Compressed air consumption: 210 NL/min Extraction nozzle: 250 mm Extraction volume: 5300 m³/h Extraction speed: 30 m/sec Dimensions: 5940 x 3800 x 2510 mm Weight: 3700 kg Availability: by arrangement Location: 63934 Röllbach

Condition: used, Meissner grinder -Type: AM 130 -Power: 13 kW -Throat diameter: 130 mm -Dimensions: 1250 x 1130 x 1300 mm -2 gears -With mixing arm Godsy I Nidopfx Alxsub -Power supply: 400V 50Hz 3Ph -Made of stainless steel -Condition: Used in very good condition, ready to work, overhauled

Condition: used, 5000 kg length 4000 mm width 1300 mm height 620 mm lenkbar star gear diameter 420 mm weight of the machine ca. 0,8 t dimensions of the machine ca. 4,0 x 1,3 x 0,62 mm Heavy-duty trailer Gujdpfx Alsy Ezztsxsb - Solid rubber tires - New plywood floor

Condition: good (used), functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, pressing force: 130 t, Equipment: CE marking, FOR SALE: Amada HFE 130-3 L CNC Hydraulic Press Brake Amada HFE 130-3 L – Heavy-Duty CNC Press Brake, 130 Tonnes We are offering a used Amada HFE 130-3 L CNC hydraulic press brake in [good / fully operational] condition. A well-built machine from Amada Europe, ideal for demanding sheet metal bending applications. Key Specifications ParameterValuePressing force1,300 kN (approx. 130 tonnes) Maximum stroke 350 mm Machine Details Year of manufacture: 2001 Condition: Good ! Tooling included Why Buy This Machine? The Amada HFE 130-3 L is a robust and precise hydraulic press brake built for high-volume industrial production. With 130 tonnes of pressing force and a generous stroke of 350 mm, this machine handles a wide variety of demanding bending tasks with excellent repeatability. Amada's renowned build quality ensures long service life and low maintenance requirements. Gedpsy Hf Tvsfx Alxoub