Used Comacchio Ch 320 for sale (17,242)

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Pgodpfx Aieuddcgj Tou Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Pgjdpjz I Uvqofx Ai Tju

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Pgsdpfxjz I Uvwo Ai Tsu

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Pgsdpfx Aez I Uwbsi Teu

Condition: good (used), functionality: fully functional, machine/vehicle number: FN501710, Year of construction: 2016, operating hours: 13,767 h, load capacity: 2,000 kg, lifting height: 4,800 mm, free lift: 1,550 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,000 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 3,663 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, lighting, sideshift, Jungheinrich EFG 320 4-wheel electric forklift, year of manufacture 2016 with a Triplex mast Details: Jungheinrich EFG 320 Year of manufacture: 2016 Work hours (h): 13767 Mast type: Triplex Lift height (mm): 4800 Freelift (mm): 1550 Build height (mm): 2180 Attachments: Sideshift Lift capacity (kg): 2000 Fork length (mm): 1000 Weight (kg): 3663 Additional hydraulic vehicle: AH2 Additional hydraulic mast: AH2 Front wheels: Superelastic Pedpfxez Eru Se Ai Tsgu Rear wheels: Superelastic Battery YOM: 2016 Battery capacity (Ah): 750 Battery voltage (V): 48 Accessories: LED Front spot light. Flashing beacon. Load guard. Comments: Full freelift. AH2 hoses to the fork carriage.

Condition: new, Year of construction: 2026, Josan generator sets – proven, robust quality! We offer leasing and financing options. Feel free to ask! ‼️5-year warranty*‼️ Equipped with sockets and Siemens circuit breakers, ATS, and more. Available for pickup in Heilbronn. We also offer affordable shipping. Just ask! Up to 1000 kW possible. All models feature diesel engines with electric starters and 56 kW at 1500 RPM. Feel free to compare prices and inquire about the types of engines offered at what price. Check what was manufactured in Germany or Europe. With us, you can also choose a model with a Cummins engine (at an additional cost). Top quality at a great price! We are here for you in Heilbronn. German company, German laws, German service – that's what you get with us! The price includes everything – all-inclusive! Our electricians, who hold German master craftsman certificates, will quickly assist you without any complications, should the need arise. We also rent out generator sets, so you won't experience any downtime. Discounts are available for orders of 10 units or more. Simply contact us, and we will call you back. Emergency generator set 320 kVA / 250 kW: ➡️Proven engine ➡️Proven 6-cylinder diesel engine ➡️Very quiet, only approx. 65 dB ➡️3-phase, 380/400 V, 220/230 V, 50 Hz ➡️AVR regulation ➡️Dimensions approx. 3700mm x 1300 x 1910mm ➡️Weight approx. 2400 kg ➡️Electric starter ➡️8 sockets at 220 volts, 16 A ➡️1 socket at 400 volts, 16 A ➡️1 socket at 400 volts, 32 A ➡️1 socket at 400 volts, 63 A ➡️Optional: 1 socket 400 volts, 125 A ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️CE certificate ➡️With battery charger ➡️With ATS Net price: €22,900.00 Emergency generator set 150 kVA / 120 kW: ➡️380/400 volts, 220/230 volts, 50 Hz ➡️AVR regulation ➡️Very quiet, only approx. 65 dB ➡️Dimensions approx. 2800 x 1100 x 1500mm ➡️Weight 1390 kg ➡️Proven 6-cylinder diesel engine with 132 kW / 1500 rpm. ➡️Electric starter ➡️8 sockets at 220 volts, 16 A ➡️1 socket at 400 volts, 16 A ➡️1 socket at 400 volts, 32 A ➡️1 socket at 400 volts, 63 A ➡️Optional: 1 socket 400 volts, 125 A ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️CE certificate ➡️With ATS ➡️With battery charger Net price: €10,900.00 Emergency generator set 63 kVA / 50 kW: ➡️380/400V, 220/230V, 50 Hz ➡️Very quiet, only approx. 65 dB ➡️Proven 4-cylinder diesel engine with 56 kW, 1500 RPM ➡️Weight approx. 860 kg ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️Electric starter ➡️CE certificate Pedpfx Ajp E Egaoi Tegu ➡️8 sockets at 220 volts, 16 A ➡️1 socket at 400 volts, 16 A ➡️1 socket at 400 volts, 32 A ➡️1 socket at 400 volts, 63 A ➡️Compliant with all EU standards (including 220 volts as used in Germany) ➡️With AVR regulation ➡️With battery charger ➡️With ATS Net price: €6,900.00 Emergency generator set 50 kVA / 40 kW: ➡️Proven engine ➡️Proven 4-cylinder diesel engine ➡️Very quiet, only approx. 65 dB ➡️380/400V, 220/230V, 50 Hz ➡️Dimensions approx. 2250 x 960 x 1270 mm ➡️Weight approx. 860 kg ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️Electric starter ➡️CE certificate ➡️With ATS ➡️AVR regulation ➡️With battery charger Net price: €6,900.00 Emergency generator set 25 kVA / 20 kW: ➡️25 kVA / 20 kW ➡️Proven engine ➡️Very quiet, only approx. 65 dB ➡️3-phase, 380/400V, 220/230V, 50 Hz ➡️Dimensions approx. 1800 × 900 × 1000 mm ➡️Weight approx. 650 kg ➡️Electric starter ➡️CE certificate ➡️With ATS ➡️AVR regulat

Condition: excellent (used), Year of construction: 2002, ARBURG 320 S 350-150 (2002) General information 1. Manufacturer: ARBURG 2. Model: ALLROUNDER 320 S 350-150 3. Year of manufacture: 2002 4. Machine type: Hydraulic injection moulding machine 5. Control system: ARBURG SELOGICA (version to be confirmed) Clamping unit 1. Clamping force: 350 kN (35 ton) 2. Platen dimensions: 455 × 455 mm 3. Distance between tie bars: 320 × 320 mm 4. Maximum daylight: 575 mm 5. Minimum mould height: approx. 175 mm (to be confirmed) Injection unit 1. Screw diameter: 30 mm 2. Screw type: Wear-resistant, suitable for materials with up to 30% glass fibre (as specified) 3. Injection pressure: approx. 2,210 bar 4. Maximum injection volume: approx. 78 cm³ 5. Maximum shot weight (PS): approx. 71 g 6. Maximum screw stroke: approx. 110 mm 7. Effective screw length: 20 L/D Pgedpfjwmqx Rsx Ai Tju 8. Maximum injection flow: approx. 82 cm³/s Hydraulic system 1. Hydraulic pump motor power: approx. 11 kW 2. Hydraulic oil capacity: approx. 120 l Dimensions and weight 1. Machine weight: approx. 2,250 kg 2. Country of manufacture: Germany

Condition: used, mileage: 64,507 km, power: 382 kW (519.37 HP), first registration: 07/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2027, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ADR approval, i=2.53, LED lights: rear, SML, daytime running lights, outline marker lights, rotating beacon, multifunction steering wheel, Easy-Control, assistance systems: cruise control ACC Stop & Go, EBA, LDW, turn assist, 7" media system, steel bumper, external sun visor, reversing camera, radio pre-installation, compressed air gun, additional mesh basket Pgedpfx Aijyg Twuo Tju

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Max. turning diameter over bed: 320 mm Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Multifix quick-change toolpost with tool holders Pedpfx Aijyh Hg No Togu Documentation and accessories Machine is powered up and available for inspection

Condition: used, mileage: 9,422 km, power: 184 kW (250.17 HP), first registration: 05/2025, fuel type: diesel, overall weight: 11,990 kg, next inspection (TÜV): 06/2027, gearing type: automatic, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, Opti View, Trigenius, full equipment package, Powermatic – LED headlights – automatic headlight control – auxiliary heater – sound system – air horn – Professional 12.3-inch instrument cluster – MAN EasyControl. Pgedszkdfijpfx Ai Teu

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: 8x8, wheelbase: 5,000 mm, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 6, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, storage area. Features: 2 comfort seats, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, electric sunroof, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, automatic transmission, differential lock, fog lights, work lights, leaf spring suspension, air and light connections for trailer hitch, aluminum tank, hydraulic cross-locking, green environmental badge. Wheelbase: 5000 mm. Body: 26t Hyva T26-55-S roll-off system for containers from 4.3m to 6.6m. Off-road package plus, trailer package, safety package visibility and light plus, EBS, ABS, full brake assist, drum brakes on all axles, parking brake additionally on front axle, emergency braking signal, radiator protection below, MAN TipMatic 12.28 OD, driving program MAN Performance/Efficiency/Offroad up to 70,000 kg, 1st and 2nd front axle 9t AP, differential lock on all axles, TM cab, electric glass sunroof, rain sensor, LED package plus, cornering light, LED headlights, LED daytime running lights, headlight cleaning system, high beam assist, light sensor, MAN OptiView, driver's seat package premium, passenger seat package premium, preparation for toll collection, driver's workstation package plus, ASR, emergency brake assist EBA Plus, 6kW water auxiliary heater, lane departure warning LDW, driver alertness system, front detection, traffic sign recognition, distance warning, MAN Media System Professional Navigation 12.3 inch, MAN sound system, auxiliary drive dependent on engine, flywheel f=1.233 650/720Nm continuous/short-term. Former new price of the chassis approx. €166,000.00 net! Pgedpfxoz Icyko Ai Teu All information without guarantee as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2023, functionality: fully functional, total height: 550 mm, total width: 300 mm, total length: 680 mm, input voltage: 400 V, ground cable length: 3 mm, overall weight: 36 kg, type of cooling: air, welding current at 100% duty cycle: 280 A, input current: 320 A, welding current (min.): 10 A, welding current (max.): 320 A, input frequency: 60 Hz, Equipment: head guard, The GYS NEOPULSE 320 C is a professional digital three-phase welding power source designed for high-performance MIG/MAG, Pulse MIG/MAG, TIG DC, and MMA welding. Welding current: 10–320 A Power supply: 3 × 400 V AC, 50/60 Hz, ±15% Maximum input current: 26 A Effective input current: 22 A Pjdpfx Aiez H Uizj Tsgu MIG/MAG duty cycle: 320 A 40%, 300 A 60%, 280 A 100% TIG DC duty cycle: 320 A 40%, 300 A 60%, 280 A 100% MMA duty cycle: 320 A 40%, 300 A 60%, 280 A 100% Open-circuit voltage: 85 V Wire feed speed: 1–22 m/min Protection class: IP23 Insulation class: Class A Cooling: Air-cooled power source; compatible with an optional water-cooling unit for water-cooled torches Processes: MIG/MAG, Pulse MIG/MAG, TIG DC, and MMA Manufacturer: GYS S.A.S., France The NEOPULSE 320 C is equipped with digital synergic control, allowing for precise adjustment of welding parameters and providing stable, high-quality welding performance. It is suitable for welding mild steel, stainless steel, aluminum, and other alloys in professional and industrial applications.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347139 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 Podpfx Aez Eh Tqji Tjgu >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 41,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 5,900 mm, brakes: retarder, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Lg. Haus, 1x comfort seat, 1x sleeping berth, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), retarder, automatic transmission, differential lock, fog lights, leaf suspension, low-noise G1, roof hatch, green environmental badge. Wheelbase: 5900 mm. 400l steel tank, drum brakes front and rear, emergency brake assist, Euro 5, MAN TipMatic 12.28 OD with retarder 35, multifunction steering wheel, Climatronic, MMT Infotainment System Starter High, MAN sound system. PTO NH/4c! Frame length approx. 7400 mm! Frame height approx. 1170 mm! Pedjz Ebx Tjpfx Ai Togu Available: 4 x TGS 41.440 8x4 BB CH 4 x TGS 41.480 8x4 BB CH ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors reserved!

Condition: good (used), ECKOLD R 320 is a specific forming tool specially designed for use with an Eckold Kraftformer Pgjdpoz Arkqsfx Ai Tsu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 472 km, power: 375 kW (509.86 HP), first registration: 05/2025, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGS 33.510 BB 6x4 CH truck chassis with initial registration in 05/2025, 33-ton variant, 6x4 drive, wheelbase 3.30 m, 510 hp, with auxiliary drive, air conditioning, refrigerator, trailer coupling, total weight 59 tons, and more. Operating weight 33 tons Permissible total weight 26,000 kg 28,000 kg permissible total vertical load Tech. Plus Medium-high construction TN long cab with 1 bunk and rear window Diesel engine with 375 kW (510 hp) and 2,600 Nm torque, Euro 6 D Drive 6 x 4 Wheelbase 3,300 mm, 800 mm rear frame overhang Pgjdpfxsz Exgzs Ai Tou Differential locks in rear axles MAN TipMatic 12.28 OD transmission Auxiliary drive, transmission-dependent, type NH/4c, without flange, f=1.14, position approximately 2:30 High-performance engine brake MAN EVBec, steppable MAN EfficientRoll transmission function MAN freewheeling transmission function Transmission for increased driving force in driving mode MAN Idle Speed Driving transmission functionality MAN TipMatic Performance and Efficiency driving program, up to 70,000 kg MAN TipMatic Offroad driving program, up to 70,000 kg MAN TipMatic Manoeuvre driving program, maneuvering mode MAN EasyStart hill start assist Full brake assist ABS, EBS, ASR, ESP Front and rear axles with leaf suspension Front axle 9,500 kg, rear axle 13,000 kg Stabilizer on front and rear axles Axle ratio i=3.63 Trailer coupling ROCKINGER type 400 G 150A with compressed air connections for trailer load up to 40,000 kg Tech. Plus 59,000 kg permissible total weight Tech. Plus Climatronic Cruise control Multi-function steering wheel Sun visor Roof hatch 2 LED work lights behind the cab roof 2 LED roof-mounted marker lights on the cab roof Rear lights and daytime running lights LED 2 outline lights and turn signals on the side LED Preparation for reversing camera Pull-out refrigerator in the cab Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl control panel, 2 functions, can be operated from the outside when the door is open Driver comfort seat, air-suspended and heated, with lumbar support and shoulder adjustment Comfort seat covers Smartphone integration MAN Sound System MAN Media System Advanced Navigation 7 inches Price NET, plus 19% VAT. We will be happy to provide you with attractive financing options. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2509

Condition: new, mileage: 472 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGS 33.510 BB 6x4 CH truck chassis with initial registration in 05/2025, 33-ton variant, 6x4 drive, wheelbase 3.30 m, 510 hp, with auxiliary drive, air conditioning, refrigerator, trailer coupling, total weight 59 tons, and more. Operating weight 33 tons Permissible total weight 26,000 kg 28,000 kg permissible total vertical load Tech. Plus Medium-high construction TN long cab with 1 bunk and rear window Diesel engine with 375 kW (510 hp) and 2,600 Nm torque, Euro 6 D Drive 6 x 4 Wheelbase 3,300 mm, 800 mm rear frame overhang Differential locks in rear axles MAN TipMatic 12.28 OD transmission Auxiliary drive, transmission-dependent, type NH/4c, without flange, f=1.14, position approximately 2:30 High-performance engine brake MAN EVBec, steppable MAN EfficientRoll transmission function MAN freewheeling transmission function Transmission for increased driving force in driving mode MAN Idle Speed Driving transmission functionality MAN TipMatic Performance and Efficiency driving program, up to 70,000 kg Pgedpfez Exg Iex Ai Tsu MAN TipMatic Offroad driving program, up to 70,000 kg MAN TipMatic Manoeuvre driving program, maneuvering mode MAN EasyStart hill start assist Full brake assist ABS, EBS, ASR, ESP Front and rear axles with leaf suspension Front axle 9,500 kg, rear axle 13,000 kg Stabilizer on front and rear axles Axle ratio i=3.63 Trailer coupling ROCKINGER type 400 G 150A with compressed air connections for trailer load up to 40,000 kg Tech. Plus 59,000 kg permissible total weight Tech. Plus Climatronic Cruise control Multi-function steering wheel Sun visor Roof hatch 2 LED work lights behind the cab roof 2 LED roof-mounted marker lights on the cab roof Rear lights and daytime running lights LED 2 outline lights and turn signals on the side LED Preparation for reversing camera Pull-out refrigerator in the cab Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl control panel, 2 functions, can be operated from the outside when the door is open Driver comfort seat, air-suspended and heated, with lumbar support and shoulder adjustment Comfort seat covers Smartphone integration MAN Sound System MAN Media System Advanced Navigation 7 inches Price NET, plus 19% VAT. We will be happy to provide you with attractive financing options. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2509

Condition: used, functionality: fully functional, overall weight: 1,500 kg, Year of construction: 2002, Erkat ER850-5 excavator-mounted milling cutter Year of manufacture: 2002 MS10 mounting system Operating pressure: 320 bar Approx. 1,500 kg Pgjdpfx Aisz Dglis Tou Cutting head width: 850 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 5,400 h, mileage: 87,000 km, load capacity: 230 kg, lifting height: 20,000 mm, fuel type: diesel, TRUCK MOUNTED PLATFORMS Pedozqzwijpfx Ai Togu SOCAGE DA 320 Year 2010 Working height 20 m Horizontal outreach 9 m Basket capacity 230 kg Hours 5.400 km 87.000 Complete of all documents

Condition: used, power: 324 kW (440.52 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,000 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, retarder, traction control, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Differential lock - Low noise - Speed limiter - Intarder - Air conditioning - Air-suspended seats - Rear-view camera - Power take-off (PTO) EUROMIX TO GO – immediately available new vehicles from the Porta Westfalica warehouse. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. MAN TGS 32.440 8x4 BB CH EuromixMTP EM 9 L MAN TGS 32.440 8x4 BB CH Year of manufacture: 2026 First registration: New 440 hp (324 kW) Euro 6e MAN D2676 diesel engine MAN TipMatic automatic transmission Permissible total weight 32,000 kg Wheelbase 2,505 mm Front axle track 1,795 mm Rear axle track 1,400 mm Leaf spring suspension front and rear (BB) Fuel tank 220 liters AdBlue tank 35 liters Cab color: Pure white RAL 9010 Cab Cab NN (narrow, medium, normal height) Comfort cab suspension Steel bumper Tinted front and side windows Central locking Electrically adjustable and heated exterior mirrors Curb mirror on the right Front mirror Two vehicle keys Comfort features Air conditioning Air-suspended comfort driver's seat with armrest Co-driver's seat with storage box Multi-function steering wheel, height and tilt adjustable Digital instrument cluster Professional 12.3 inches Exterior sun visor Sun visor driver's side Interior and reading lights Numerous storage compartments Safety & Assistance Systems Emergency braking assistant EBA Plus Turning assistant Traffic sign recognition Attention warning system (Driver Monitoring System) Front Detection System Reversing Motion System ESP (Electronic Stability Program) ABS EBS ASR Cruise control Tire pressure monitoring system with temperature display Tire pressure monitoring for trailer Hill start assist MAN EasyStart LED daytime running lights Fog lights Automatic headlight activation Multimedia & Connectivity MAN Media System Advanced Navigation system Europe Online Traffic Smartphone integration (Apple CarPlay / Android Auto) MAN sound system Pedpozntqvefx Ai Togu Connectivity Board module Preparation for MAN Apps Digital tachograph Pirelli 315/80 R22.5 tires Disc brakes on the front axles Drum brakes on the rear axles Differential locks on the rear axles MAN EVBec high-performance engine brake EuromixMTP - Concrete mixer body EM 9 L Model: EM 9 L Nominal volume 9 m³ ready-mix concrete Lightweight mixer drum Lightweight mixer drum made of HARDOX S450 material Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, body and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contact persons • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: 160...

Condition: excellent (used), mileage: 708,479 km, power: 235 kW (319.51 HP), first registration: 07/2008, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: parabolic leaf (spring), total length: 8,400 mm, total width: 2,550 mm, total height: 3,100 mm, Year of construction: 2008, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, power assisted steering, = Additional options and accessories = - Parabolic suspension - Passenger seat - PTO - Radio/CD/Audio system - Sun visor = Remarks = TRANSPORT TO ANTWERP 590 EURO = More information = Axle configuration Tyre size: 315/80 R22.5 Suspension: parabolic suspension Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 13.550 kg Carrying capacity: 12.450 kg GVW: 26.000 kg Psdpozw Huysfx Ai Tegu Functional Tipper: Back Condition Technical condition: very good Visual appearance: very good

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 320 mm, feed length Z-axis: 420 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 8,000 rpm, total height: 2,530 mm, total width: 1,950 mm, total length: 2,600 mm, table width: 260 mm, table length: 800 mm, type of input current: three-phase, overall weight: 2,600 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, CNC MACHINING CENTER 532 Metal Technics Polska MTP CNC 532 SPECIAL OFFER - 5% DISCOUNT Original price: €17,936 net EXW Discount: €896.80 SPECIAL PRICE: €17,039 NET EXW Year: 2026 Condition: New, fully functional Location: Sokołów Podlaski, Poland DESCRIPTION The MTP CNC 532 is a compact and precise vertical CNC machining center designed for milling, drilling and tapping of steel, aluminium, non-ferrous metals and engineering plastics. The machine features professional SIEMENS SINUMERIK 808 Advanced control, SIEMENS servo drives, precision linear guideways and ball screws. Its rigid construction provides excellent stability, accuracy and repeatability, making it suitable for CNC workshops, tool rooms, prototype production and small-to-medium series manufacturing. A fully enclosed working area protects the operator from chips and coolant, while the automatic lubrication system reduces maintenance requirements. TECHNICAL SPECIFICATIONS • Table: 800 x 260 mm • Spindle taper: BT30 (BT40 optional) • X/Y/Z travel: 500 / 320 / 420 mm • Spindle-to-table distance: 90-470 mm • Maximum spindle speed: 8000 rpm • Tool magazine: 10 positions • Rapid traverse X/Y/Z: 10 / 10 / 8 m/min • Working feed: 2.6-2500 mm/min • Servo torque X/Y/Z: 6 / 6 / 7.7 Nm • Positioning accuracy: +/- 0.02 mm • Repeatability: +/- 0.01 mm • Main motor: 3.7 kW • CNC control: SIEMENS SINUMERIK 808 Advanced • Servo drives: SIEMENS • Power supply: 400 V, three-phase • Dimensions: 2600 x 1950 x 2530 mm • Weight: 2600 kg STANDARD EQUIPMENT • SIEMENS SINUMERIK 808 Advanced CNC • SIEMENS servo drives • 8000 rpm spindle • 10-position automatic tool magazine • Fully enclosed working chamber • Precision linear guideways and ball screws • Automatic lubrication system • Pneumatic system • LED working-area lighting • 3-color status/alarm lamp • CE Declaration of Conformity • Technical and operating documentation APPLICATIONS Ideal for precision milling, drilling and tapping, prototype production, tool rooms, CNC workshops and serial manufacturing. TRANSPORT, WARRANTY & SERVICE Professional transport is available throughout Europe, with costs calculated individually according to destination. Free collection from our warehouse in Sokołów Podlaski is also available. The machine is supplied with a 12-month warranty, warranty service and spare-parts support. Post-warranty servicing and spare parts are also available. SPECIAL PRICE Original price: €17,936 net EXW 5% discount: -€896.80 SPECIAL PRICE: €17,039 NET EXW VAT applies where legally required. Metal Technics Polska Pgsdpfx Aisy Ht Axs Tsu Fabryczna 1, 08-300 Sokołów Podlaski, Poland Contact us for availability, transport quotation, additional photos, videos or an individual commercial offer.

Condition: used, functionality: fully functional, machine/vehicle number: FN 573399, Year of construction: 2018, operating hours: 2,550 h, load capacity: 2,000 kg, lifting height: 4,640 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,700 kg, drive type: Lithium-Ionen, Electric 4-wheel forklift Chassis number: FN 573399 Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Pgodpfx Aoz N I Nnoi Tju Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 40 - 60% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Battery voltage: 48V Battery Ah: 390Ah Battery manufacturer: JH Battery type: Lithium-ion Battery year of manufacture: 2018 Battery condition: 80 - 100% Side shifter, 3rd valve, 4th valve, front work light, partial cabin, rotating beacon.

Condition: used, Mikron WF 32 CH Universal Milling Machine Machine with chip and splash guard enclosure Equipped with a Heidenhain TNC355 control system Technical Data Manufacturer: Mikron Type: WF 32 CH Control System: Heidenhain TNC355 Travel ranges: X 560 mm, Y 500 mm, Z 400 mm Clamping area: 530 x 900 mm Pjdpfjwit Rhsx Ai Togu Rapid traverse rates: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 – 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg Heidenhain TNC355 Operating Manual Heidenhain TNC355 Programming Examples Heidenhain TNC 355 Service Manual You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, mileage: 73,600 km, power: 375 kW (509.86 HP), first registration: 08/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Trailer package, diesel engine MAN D2676 LFxx 590, 382 kW (520 HP) power, 2,600 Nm torque, Euro 6e WITHOUT TRAILER SURCHARGE. EBS, full brake assist, MAN Easy Start, reversing warning, Efficient Roll, 2 rotating beacons on FH roof, LED lighting, ASR, MAN EasyStart anti-roll-back lock, MAN TipMatic Manoeuvre, maneuvering mode, prepped for backup camera, emergency brake assist, LDW, all-round beacon Towing coupling Rockinger SK5, MAN Media Advanced 7'', without navigation map, Rio Box, 2 USB sockets in storage compartment, smartphone integration, engine-driven PTO. Tipper bridge 5,600mm x 2,380mm, type D421, side wall height 1,000mm, front wall height 1,200 mm, 200mm baffle on front wall, fixed corner stanchions, rear wall height 1,000mm, swinging rear wall with automatic locking, 450mm chute on tipper bridge. Axial pump tipping hydraulics Meiller type 295/454, permanently rated engine PTO. Pgodpfxeuciy Is Ai Teu