Used Combined Planer-Thicknesser for sale (6,316)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 7.5 kW (10.20 HP), planing width: 625 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (min.): 5,000 rpm, overall weight: 1,000 kg, 4-knife TERSA cutter head for planer Motor power 7.5 kW Positioning control for the thickness table Segmented infeed roller Segmented pressure bar Feed speeds of 7 + 14 m/min Table extension Planing width 625 mm, chip removal up to 8 mm, planing height 3.5-305 mm Thickness table mounted on four support spindles and with 4-point guidance. Heavily ribbed cast iron table, finely planed Modern control panel ergonomically positioned. Electric thickness table adjustment with LED display. Buttons for adjusting in rapid or slow mode, Adjustment accurate to 1/10 mm; integrated operating hour counter. Electronic starting and braking system. Electronic, wear-free brake for safe stopping of the cutter head. Infeed roller in rubber and two rubber outfeed rollers (high quality, low wear) Segmented pressure bar, rotary knob with scale, for adjusting the pressure (preload) of the outfeed pressure bar Two feed speeds 7 + 14 m/min; electrically switchable, also during planing Thickness hood with carpet support, can be used as a storage area for wood. Dust extraction port Ø 160 mm, to the left (can also be on the right – can be easily converted on site) Air velocity 22 m/s Integrated tool storage compartment for operating tools and planing knives Electrical equipment according to VDE/EN 60204 with main switch, emergency stop button and 2nd emergency stop button on the discharge side, winding protection, undervoltage protection, contact for controlling the dust extraction, accessories: 1 set of knives installed, operating tools, grease gun, operating manual Laodpfsz Dkftsx Ahaoh Weight: approx. 1000 kg CE-compliant, BG-Holzstaubgeprüft No. HM 23001 Workplace-related emission values dB(A) according to DIN 45635 Part 1650 Idle noise approx. 69 dB(A), operating noise approx. 79 dB(A) Workplace-related dust emission value: 0.44 mg/m³

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm Laodpfxsyatffe Ahaoh - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: like new (used), Year of construction: 2011, Marel / Scanvaegt Scan Combinator 5414-2L-AD Multihead Weigher With hygiene a major factor in the food industry, Scanvaegt's Scan Combinator 5400 multihead weigher has been developed with this in mind. This machine has hygienic features such as watertight closed leg construction, so that water and dirt can't hide in crevices inside the machine, and it has no plane surfaces to stop dirt from adhering. The weigher can be incorporated at the heart of packaging line, as it can handle infeed, weighing and packing into almost any kind of packaging, or as stand-alone multihead weigher, for use with wet, individually quick frozen and dry products. This line is complete with Marel/Scanvaegt Scan Combinator 5414-2L-AD Multihead Weigher, feed vibrator and platform. Manufacturer: Marel / Scanvaegt Model: Scan Combinator 5414-2L-AD Year: 2011 (never used) Number of weighing heads: 14 Capacity: Up to 120 portion per minute (depending on product) Lodsv Ix Ahspfx Ahasah Machine Dimensions LxWxH: 850 kg. Machine Weight: 1.650x1.200x3.109 mm

Condition: used, Year of construction: 2018, travel distance X-axis: 2,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 10,000 rpm, spindle nose: SK 50, Used CNC portal milling machine KRAFT VM-2018B with Heidenhain TNC 620 Year of manufacture: 2018 Storage location: Germany Delivery time: short term Payment: 100% before loading Warranty: none Machine description The KRAFT VM-2018B is a precise and powerful CNC portal milling machine with HEIDENHAIN TNC 620 control, ideal for heavy-duty and high-precision machining processes. Thanks to its robust design and high-quality components, it is ideal for demanding milling tasks in tool and mold making as well as in series production. Highlights & features Monoblock cast iron bed and cross beam for maximum rigidity and precision FEM-optimized machine design BF gearbox with 26 kW motor for high torque (662 Nm) Feed roller linear guides P-class (very low coefficient of friction 0.003-0.006) C3 ball screws with double nut - high load capacity & accuracy Spindle: SK50, 10. 000 rpm, direct drive Heidenhain TNC 620 control Ledswkg T Sjpfx Ahaoah Spindle cooling & IKZ 20 bar Coolant system, oil separator, air conditioning for control cabinet Full enclosure, TÜV-approved, CE-compliant Technical data Travel (X/Y/Z): 2,300 / 2,000 / 1,000 mm Table size: 2,300 × 1,600 mm T-slots: 8 × 22 × 180 mm Max. Table load: 8 t Distance spindle nose - table: 180-1,180 mm Rapid traverse X/Y: 20,000 mm/min Rapid traverse Z: 15,000 mm/min Feed range: 1-10,000 mm/min Positioning accuracy (VDI/DGQ3441): 0.020

Year of construction: 1978, condition: reconditioned (used), Planer thicknesser 600 mm, planing width 600 mm, planing height 180 mm, 3-knife cutterhead, cutterhead diameter 125 mm. Fully overhauled, technically sound and ready for operation. New electrical system, all required lubrication points present. Cast iron body, weight 890 kg. Foldable tables, table height adjustable. Grease nipples at all necessary locations. Laodpfxeyablts Ahash

Condition: new, functionality: fully functional, planing width: 530 mm, number of planer blades: 4, Equipment: motor brake, Houfek R 530 surface planer - 400V/50Hz, 5.5 kW (7.5 HP), width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterhead 1.2 Total work table length 3100 mm 1.3 Dimension of the guide ruler 1300x150 mm with tiltable auxiliary ruler 1.4 Planed table 1.5 Upper control panel with ELGO Z60 digital display Electronic adjustment of the take-off 0 - 7 mm Tilt angle of the tiltable ruler 0°- 45° - Digital display Adjustment of the input table inclination (pointed/hollow joint) 1.6 Cover for the SUVAMATIC planing roller 1.7 4-knife planing roller D=120 mm 1.8 Automatic star/delta start of the motor 1.9 Electromagnetic brake 1.10 Suction nozzle with outlet D=150 mm 1.11 Blade setting gauge 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards Ledpfx Ahou Rnqqoaoah

Condition: used, functionality: fully functional, power: 18.5 kW (25.15 HP), color: orange, overall weight: 2,510 kg, operation weight: 2,190 kg, Year of construction: 2019, operating hours: 1,800 h, Hamm HD10 VT Combination Roller Year of manufacture: 2019 1,800 operating hours 18.5 kW Kubota engine Lsdpfx Ahjz E Ru Rjasah 2,190 - 2,510 kg Edge cutting wheel

Condition: excellent (used), SCM S 52 Thicknessing Machine Lajdpsz I Ihtofx Ahaoh - Max. planing width 52 cm - Max. planing height 24 cm - Electric planing height adjustment - 4 standard knives - 4 feed speeds - Table roller In very good condition.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Ledpfxsz Eft Ij Ahaoah Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2105025, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, input current: 72 A, Four-sided planer Leadermac Compact LMC-523C with 5 spindles, manufactured in 2021. Working width 15 - 230 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm for sequential feed). Spindles: 3 x 7.5 HP and 2 x 10 HP, spindle speed 6,000 rpm, spindle diameter 40 mm. Feed motor 5 HP with inverter, feed speed 6 - 24 m/min. Fully enclosed machine with sound insulation, chrome-plated feed table, pneumatic pressure rollers with 3 adjustment positions, and a solid cast iron frame. Connection 380 V / 50 Hz, CE version. Options: infeed table 2.5 m (instead of 2 m), pneumatic side pressure roller on the left spindle, split pressure roller at the top, additional tables for multiple sawing on the 2nd bottom spindle, anti-kickback device, and Schneider Easyset touchscreen (1 x conventional and 2 x NC). Ljdpfoz Ngitex Ahaoah

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2201010, Four-sided planer Leadermac Compact LMC-530C with 5 spindles, year of manufacture 2022. Working width 15 - 300 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm with sequential feed), infeed table 2500 mm. Spindles: 15 HP, 10 HP, 10 HP, 20 HP and 20 HP, diameter 50 mm, 6,000 rpm. Feed motor 7.5 HP, 6 - 24 m/min. Schneider 5.7-inch touchscreen EASYSET with NC control of axis 3 (left radial), axis 4 (top radial) and height adjustment of the pressure bar. Pneumatic left side pressure roller, two-part pressure shoe, extra table and anti-kickback device for multiple sawing. Laodpfx Ahjz Ngiyjash

Condition: good (used), Bernardo 320 multi-function machine: saw, planer, router – 5-in-1 Planer: width 32 cm, max height approx. 220 mm, 3 knives, 1 feed speed, Jointer: width 31 cm, table length approx. 140 cm, 3 knives, adjustable fence, Router: spindle diameter 30 mm, 2 speeds, 3500/7000 rpm, side carriage, adjustable fence, Saw: Lodpfxoy Ti Tms Ahaeah adjustable up-down and 0-45 degrees, side carriage, guide rail on the side carriage, Horizontal drilling machine: Table adjustable up-down, front-back, and left-right. The machine has 3 motors, each with 4 kW. Power supply: 380V. Used machine in good condition, ready for operation. Robust multi-function machine. Weight: 760 kg.

Condition: ready for operation (used), power: 11 kW (14.96 HP), planing width: 810 mm, number of blades: 4, For sale is a robust Panhans thickness planer, model DH 810, featuring a large planing width and a clear digital display for the planing depth. Ledjz I T Daepfx Ahaeah Technical data / Equipment: + Planing width: 810 mm + Motor power: 11 kW + 4-knife planing shaft + Digital display for the set planing depth + Two rollers in the thickness table to assist with workpiece transport + Robust, heavy-duty construction Inspection and test run possible by arrangement in Haldensleben. Invoice with VAT shown. Transport can be arranged for an additional charge.

Condition: used, Weinig Profimat 22N four-sided planer Max. planing width: 230 mm Max. planing height: 120 mm 4 heads Ledpfx Ahjz Hm Dqoasah Heads are fully adjustable Bottom spindle: 5.5 kW Side spindle: 5.5 kW Top spindle: 5.5 kW Spindle diameter: 40 mm Feed rate with stepless adjustment from 6 to 22 m/min Robust planer from the WEINIG brand. Machine inspected, well-maintained, and in very good condition.

Condition: used, functionality: fully functional, machine/vehicle number: 30242, mileage: 99,900 km, power: 338 kW (459.55 HP), first registration: 09/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro6c, suspension: steel-air, loading space volume: 14 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles available upon request. Combination sweeper/vacuum truck with water recycling system ADR equipment, engine D2676LF52, front suspension parabolic 9.5t, rear suspension air, differential lock rear axle, trailing axle steerable and liftable, hill start assist, lane keeping assist (LGS IV), disc brakes, MAN BrakeMatic, emergency braking signal (ESS), emergency brake assist (EBA2), ABS, ASR, ESP, exhaust pipe raised on the right, tires: steering axle 385/65R22.5, drive axle 315/80R22.5, tires 385/65 R 22.5 - 315/80 R 22.5, fuel tank 400 liters - 60 liters AdBlue, length/width/height 9.550/2.550/3.800 Laedpfxoz Hnf Aj Ahash Cab: 2 seats, driver's comfort seat with air suspension, passenger seat static, central locking, cruise control, air conditioning, fine dust and pollen filter, tilting roof, speed limiter 90 km/h, TollCollect pre-equipment, digital tachograph Conti, MAN Tronic on-board computer, MAN Media Truck Advanced radio with Bluetooth and navigation, radio system, windshield, door windows and side windows tinted, electric door window lifts, sun visor, sun shield, mirrors heated and electrically adjustable, reversing camera, 2 rotating beacons on the cab roof Superstructure KROLL with water recycling: extension piston, 3-way adjustable piston with volume division water/sludge: approx. 3 m³ / 10 m³, 5 m³ / 8 m³, 7 m³ / 6 m³, filling level indicator in front of and behind the piston with internal float and external scale, hydraulically upward-opening full-size top cover with hammer head locking, lower suction connection, water treatment unit, all working functions fully automatically controlled via CAN-BUS technology (KROLL-CANMATIC), combined operation of suction and high-pressure flushing, variable water and sludge chamber, emptying by means of discharge piston, automatically operating water treatment, can be switched off, "Self-Cleaning-Control" automatic final cleaning of all components of the WRS system without operator intervention, vacuum pump CVS water ring pump VacuStar WR 2500, suction capacity 2,500 m³/h with pneumatic pressure control valve, high-pressure pump URACA P 3-45 (approx. 348 l/min at 205 bar), hose reel cassette with simultaneous telescopic boom DN 125, large HD reel swiveling by 180° for 240 m DN 25, small HD reel for 60 m / DN 13, central control panel in stainless steel housing with louvre at the rear right, second control panel mounted on swiveling HD reel, remote control, discharge apron made of aluminum, closed hose box made of aluminum on the right, open hose box made of aluminum on the left, electric winch, rope pulley, vice, storage box, LED ambient lighting, LED work lights with 20 m cable and with approx. 15 m cable extension in drum, hand washing basin, ladder, fire extinguisher, reversing camera, rotating beacon at the rear.

Condition: used, Year of construction: 2003, Working width: 520 mm Planing height: 250 mm Planing cutterhead: Tersa Number of knives: 4 Height adjustment: electric Thickness display: Scale Feed rate: 2 speeds Infeed roller: Steel Outfeed roller: Steel Table rollers: no Ljdpfx Ahoz A D Uljajah Motor power: 5.5 kW Dust extraction connection: 140 mm Machine length: 1200 mm Machine width: 1400 mm Weight: approx. 900 kg

Condition: used, functionality: fully functional, machine/vehicle number: 32247, mileage: 540,900 km, power: 294 kW (399.73 HP), first registration: 10/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, loading space volume: 12 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. ABS, ASR, steel bumper, differential lock, reversing camera with a 5" color screen in the cab, cab with 2 seats, driver's seat with air suspension, sunroof, circuit breakers, additional 12V socket in the cab, voltage converter 24V/12V, radio-CD, mirrors heated and electrically adjustable, electric windows, tinted windows with band filter, dust box fixed on the engine tunnel, immobilizer with transponder, air conditioning, cruise control. Tank volume approximately 15 cubic meters, 3-way adjustable partition with manual locking, division of water/sludge in cubic meters 2.5/11.5; 6.5/7.5; 8.7/5.3, full-size lid with hydraulic locking, upper and lower suction connection DN 100, flanged. An intermediate drainage is possible via the upper suction connection (sludge water can be pushed back into the sewer). Vacuum pump Samson V21 (1150 cubic meters/hour), mechanically driven, suction hose cassette DN 100, approximately 18 m long, lying flat on the tank with hydraulic roller drive, permanently mounted suction hose guide above the HD reel, HD pump URACA KD 716-G 60 (330 l/min at max. 170 bar), large hose reel on the bottom flap (120 m HD hose DN 25), hydraulically driven and hydraulically pivoting, with cross-lead spindle and hose deflection roller, small hose reel with 60 m HD hose DN 13, manually driven. A control panel made of stainless steel, mounted on the rear right of the superstructure, with all relevant control elements, a second control panel made of stainless steel, mounted on the large hose reel, and a remote control with the functions vacuum pump on/off, HD pump on/off, engine speed +/- , upper suction connection open/close, emergency stop specifically for the use of the vehicle as a suction truck, hose box on the left over the entire length, tool boxes on the right over the entire length with an open hose box above, storage box and stone box, ladder and vise, spray gun and hand washing facility, a work light at the rear, a work light on the right and left as ambient lighting, rotating beacon at the rear. Laodpfoz Hmctex Ahash

Condition: used, Year of construction: 2016, Used four-sided planer WEINIG Powermat 600 Compact for sale. Laodpfx Ajz Hyvyjhaoh

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 80×25, volume flow: 504 m³/h, Used Ebara 80 x 25 Booster Vacuum Pump Combination – Dry Multistage Vacuum Pump – Semiconductor Vacuum Pump Manufacturer: Ebara Model: Ebara 80×25 Serial no.: Ebara DPD 966504 Pumping speed: USA 60 Hz, 8,400 L/min Dimensions: 60 x 90 x 110 cm Laodpfxexiv Sxj Ahash Motor: 3 PH, Induction motor 2.2 kW, 208 Volt, 60 Hz. Sold individually.

Condition: repair required (used), Feed roller for a four-sided planer or multi-blade saw 5 arms with feed chains Adjustable arms Overall machine length: 500 cm Ljdpfx Ahslqxk Asaoah Overall arm length: 220 cm

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Lajdpfopqxnxjx Ahajh

Year of construction: 1978, condition: reconditioned (used), Thicknesser Jaroma DSMB 63 7.5 W lignum production Poland Jaroma - Technical Documentation TECHNICAL PARAMETERS: Ljdpeiq Dk Ssfx Ahajah shaft width: 630 mm detail thickness: 240 mm 4 shaft knives: knife shaft diameter: 125 mm number of rotations of the knife shaft: 6000 rpm adjustable rollers in the lower tabletop: motor: 7.5 kW electric height adjustment: two types of feed speed: dimensions (length/width/height): 120/128/125 cm weight: 1060 kg

Condition: used, Year of construction: 2018, x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Ledehx R Dvopfx Ahaeah Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction

Year of construction: 1985, condition: excellent (used), Planing width 230 mm Planing height 130 mm A set of heads included in the price Smooth feed regulation Elek. lifting Elek. sliding left head Cardan feed The order of the spindles - Lower 5.5kW - Right / Left 5.5kW - Upper 5.5kW Laedpjh Apqyefx Ahaoh

Year of construction: 2020, condition: excellent (used), Working width (mm) 400 Min.working width (mm) 8 Lajdehlhikepfx Ahash Thicknesser input (mm) 20-120 Minimum working length (mm) 500 Up and down spindle motor (KW) 5.5 Left and right spindle motors (KW) 3/3