Used Cooler for sale (1,437)

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Iodoyrxwwopfx Abmjif Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 24,297 h, machine/vehicle number: 161711, controller model: MAZAK & FANUC L-64, laser power: 1,500 W, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 420 mm, No minimum price – guaranteed sale to the highest bidder! The machine is suitable for processing sheet metal, tubes, and profiles! TECHNICAL DETAILS Travel range X-axis: 1,270 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 420 mm Swivel range A-axis: ±300° Swivel range B-axis: ±135° Laser power: 1,500 W CO₂ laser model: YB-L150A8M Sheet metal dimensions max.: 1,250 × 1,250 mm Iiedpjztxttsfx Abmsf Table load max.: 145 kg MACHINE DETAILS CNC control: MAZAK & FANUC L-64 Operating hours: 24,297 h Machine weight: 8,300 kg Last operated until: March 2025 Currently disconnected and stored EQUIPMENT Cooler Control cabinet

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Iiodpfx Absy Tybnomjf Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: used, mileage: 634,000 km, power: 324 kW (440.52 HP), first registration: 06/2016, fuel type: diesel, next inspection (TÜV): 05/2027, gearing type: automatic, emission class: euro6, Equipment: air conditioning, XF 440 Space Cab Automatic transmission Iodpfx Abszu Dvpomeif Air conditioning Auxiliary air conditioning Cooler box 2 sleeping berths NEW TACHOGRAPH SMT2!!!! Toolbox Belgian registration Good condition Price: €9,450 net

Condition: new, mileage: 450 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,800 mm, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 600 mm, Year of construction: 2023, Equipment: ABS, air conditioning, compressor, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab & Comfort: GM cab (wide, long, medium height) with comfort suspension * Electric glass sunroof * Central locking with remote control, 2 vehicle keys * Comfort seat for driver (air-suspended, with lumbar support, shoulder adjustment, seat heating, armrests) * Passenger seat adjustable in length, backrest, and height * Climatronic air conditioning, water auxiliary heater 4 kW * Comfort mattress (110 mm), slatted frame, head adjustment, various storage compartments and refrigerator * Multifunction steering wheel (leather, adjustable in height and tilt) * Comfort storage, cup holder, sockets (12V, 24V, 230V), USB ports * Interior styling "Moon Grey", LED interior lighting, ambient lighting, electric sun blinds ----Infotainment & Connectivity: MAN Media System Professional Navigation (12.3 inches) * MAN SmartSelect infotainment control with touchpad * Camera system * Advanced sound system with subwoofer * Professional instrument cluster 12.3 inches * Navigation map Europe, Online Traffic, Smartphone Integration * Connectivity board module ----Safety & Assistance Systems: Electronic Stability Program (ESP) * Traction control (ASR) * Cruise control, speed limiter * Emergency brake assist (EBA, non-deactivatable) * Lane departure warning (LDW) * Driver attention alert (MAN AttentionGuard) * Full brake assist, ABS, EBS * High-performance engine brake (EVBec) * Retarder Eco * Disc brakes on all axles, electronic parking brake * Brake pad wear indicator * Hill start assist (EasyStart) ----Lights & Visibility: H7 headlights * LED daytime running lights * Fog lights * Cornering lights Iiedpfxovhv Ius Abmof * Automatic headlight leveling, high beam assistant, light sensor * LED rear lights, side marker lights, outline lights * 2 LED revolving beacons on cab roof, work lights (LED) * Electrically adjustable and heated exterior mirrors, curb mirror * Automatic windshield wipers with rain sensor * Sun visor ----Drivetrain & Chassis: MAN D2676 LFAF diesel engine, 375 kW (510 hp), 2,600 Nm, Euro 6e * MAN TipMatic 12.26 DD automatic transmission with retarder * Auxiliary drives (dependent on transmission, switchable, continuous operation) * Air suspension on all axles, automatic level adjustment * Differential lock rear axle * Digital axle load indicator ----Container-Platform Body: Folding side panels * Wooden floor with anti-slip coating * Lashing points in the floor * Aluminum storage boxes * Trailer coupling (RINGFEDER RF40/G150A) * HMF 5020 RCS K7 loading crane, year of manufacture 2022, fully hydraulic with oil cooler * Articulating boom with endless swivel range * Scanreco radio remote control * Crane height indicator HEW * EVS-D safety system with AutoSwitch * 2-stage LMB (Load Moment Indicator) * EVS inclination monitoring system * Dynamic load adaptation EVS-H * MKG 4-point auxiliary support (4 hydraulic cylinders) * Support width front: 5.6m / rear: 7.85m * Max. 19 m reach with max. 1730 kg lifting capacity * At 4.8 m reach, max. lifting capacity of 9040 kg * Including Jib FJ600 (reach extension) * Max. 29.40 m reach with 430 kg lifting capacity ----* Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 590 liters * AdBlue tank: 60 liters * Technical total weight: 28,000 kg * Tare weight: 19,644 kg * Permissible trailer load: 27,862 kg * Overall length: 10,720 mm * Wheelbase: 5,500 mm * Next service due: / ----Vehicle number: 8816----Errors and prior sales excepted----Advertisements and various lettering have been dig

Condition: used, mileage: 254,015 km, first registration: 08/2013, fuel type: diesel, color: green, gearing type: semi-automatic, emission class: euro5, * Mercedes-Benz CD Radio * Radio * Cooler box * Sunroof ----* Cruise control * Hill start assist * Clutch pedal ----* MEILLER hydraulic tipper Iiedpfjy T Dy Iox Abmsf * Year of manufacture: 2013 * Ringfeder pintle hook ----* HIAB 1300RS 83 crane * Year of manufacture: 2013 * Seat heating ----* Tire dimension front axle: 385/65 R 22.5 * Tire dimension rear axle: 315/80 R 22.5 * Fuel tank: 1 x 350 liters * Next inspection due: 02.2023 ----Internal vehicle number: 7560----Errors and prior sale excepted.

Condition: new, mileage: 450 km, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Mercedes-Benz Arocs 2653 tractor unit with HMF 4020K loading crane Internal vehicle number : 8948 Isdpfevhucwjx Abmjif Cab BIG SPACE L cab 2,50m flat floor Suspension: leaf-air Engine: OM 471 / 390 KW (530 HP) EURO 6 E Gearbox: G 281-12 Automatic transmission Axles: Front axle 9.0 t Rear axles 13 t Frame: 430 liter fuel tank left End carrier for AHK JOST fifth wheel coupling (manually lubricated) Brake: Disc brake Electronic brake system with ABS and ASR Electronic parking brake Additional parking brake on the front axle Secondary water retarder Driver's cab: L-cab Big Space 2.50m level floor Air-suspended cab mounting Door extension Heated front mirrors Electric glass sliding roof Rain sensor Light sensor Exterior transparent sun visor Cabin interior: Comfort bed below Leather steering wheel Tunnel carpeting Electric sunblind windshield Digital tachograph Reversing alarm Multimedia cockpit Pre-installation MB App Pre-fitting Mercedes-Benz Fleet Management Pre-fitting Fleed Borad Manager Navigation system LED ambient lighting Auxiliary heating Automatic climate control Electrics: Automatic up, dipped and cornering lights Front fog lights, LED daytime running lights LED tail lights 2x LED rotating beacons LED working lights to the rear MB star illuminated Lane departure warning system Distance Assist Attention Assist Traffic Sign Assist Cruise control Active Break Assist 5 Crane: HMF 4020 K-7 RCS Radio remote control 6 hydraulic extensions Double toggle lever EVS stability system 4 fully hydraulic outriggers Large oil cooler work lights Subject to errors and prior sale . Internal vehicle number : 8948

Condition: used, mileage: 587,055 km, power: 338 kW (459.55 HP), first registration: 02/2019, fuel type: gas, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, Equipment: air conditioning, * Multifunction steering wheel * Air conditioning Iiedpfjvhucdjx Abmjf * Cooler box * Second sleeper bed * Adaptive cruise control * Hill start assist * Lane departure warning * Leaf/air suspension -----Internal vehicle number: 9952---- Errors and interim sale excepted. WhatsApp support available! If you have questions about the vehicle or want more information, feel free to write to us easily via WhatsApp Whatsapp Whatsapp

Condition: good (used), mileage: 928,978 km, power: 480 kW (652.62 HP), first registration: 01/2007, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: blue, gearing type: mechanical, Year of construction: 2007, operating hours: 9,410 h, Equipment: ABS, electric window regulation, fog lights, power mirror, trailer coupling, - Brake booster - Low noise - Air-suspended seats - Air horn - Rotating beacon - Sun visor - Toolbox - Power take-off (PTO) Axle configuration Front axle 1: Steerable Front axle 2: Steerable Weights GVWR: 27,000 kg Functional Mast: Telescopic (12 sections) Mast length: 30 m Lifting capacity: 25,000 kg Crane manufacturer: PALFINGER PK 85002 E + PJ 170 + LIER Iodpfszuzmljx Abmjif CE marking: yes Condition Technical condition: good Optical condition: good DAF XF 480 8x4 semi-trailer tractor / flatbed truck Palfinger PK 85002 E + PJ 170 E JIB – 12-section hydraulic – approx. 34 m working height We offer you a very well-equipped DAF XF 480 8x4, designed as a multi-functional semi-trailer tractor / flatbed truck, with a heavy Palfinger PK 85002 E loading crane including Palfinger PJ 170 E JIB, mounted directly behind the cab. Due to the combination of a heavy loading crane, JIB, winch, sliding fifth wheel, trailer coupling, and ballast platform, this vehicle is ideally suited for heavy-duty crane operations, transport of machinery and construction equipment, assembly work, and special transports. VEHICLE DATA Make / Model: DAF XF 480 Drive: 8x4 Design: Semi-trailer tractor / flatbed truck First registration: 01/17/2007 Mileage: 928,978 km CAB & EQUIPMENT * DAF XF SpaceCab * Air conditioning * Auxiliary heater * Manual transmission * Spacious SpaceCab * Sliding fifth wheel * Trailer coupling * Multi-functional design as semi-trailer tractor / flatbed truck * Ballast platform * Extensive stainless steel / V2A equipment * Various stainless steel tool and storage boxes PALFINGER LOADING CRANE Manufacturer / Model: Palfinger PK 85002 E JIB: Palfinger PJ 170 E Mounting: Behind the cab Crane operating hours: 9,410 hours The crane is very extensively equipped with: * Palfinger PJ 170 E hydraulic JIB * Main boom + JIB with a total of 12 sections * Radio remote control * Hydraulic winch * Additional oil cooler for the crane hydraulics * Additional hydraulic function on the JIB * Complete hydraulic system CRANE PERFORMANCE Maximum lifting capacity: approx. 25,000 kg Maximum working height: approx. 34 meters Maximum boom / mast length: approx. 30 meters Through the combination of the heavy Palfinger PK 85002 E main crane with the Palfinger PJ 170 E JIB, this vehicle has a very large working area. The crane configuration with a total of 12 sections makes this vehicle particularly interesting for work where a large reach and working height are required. MULTI-FUNCTIONAL DESIGN A particular advantage of this DAF is its versatile configuration. The vehicle can be used as a semi-trailer tractor and has a sliding fifth wheel for this purpose. In addition, the vehicle is offered with a ballast platform, making it ideal for heavy crane work and special transports. A trailer coupling is also available and...

Condition: excellent (used), mileage: 309,153 km, power: 397 kW (539.77 HP), first registration: 06/2021, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 6,300 mm, loading space width: 2,550 mm, loading space height: 1,120 mm, Year of construction: 2021, operating hours: 710 h, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, power mirror, trailer coupling, - 4. Valve - 5. Valve - Aluminum fuel tank - Brake booster - High beam - Speed limiter - Air suspension - Air-suspended seats - Air horn - Rotating beacon - Rear view camera - Sun visor - Tool box - Power take-off (PTO) Axle configuration Front axle: Steered Rear axle 1: Lift axle; Steered Weights Unladen weight: 19,479 kg Payload: 6,521 kg GVW: 26,000 kg Functional Mast: Telescopic (6 sections) Mast length: 16 m Lifting capacity: 15,500 kg Number of valves: 4 Body manufacturer: FASSI F 545 RA.2.26 CE marking: yes Condition Technical condition: very good Optical condition: very good VOLVO FH 540 6x2 FULLY AIR-SUSPENDED – FLATBED TRUCK – FASSI F545RA.2.26 REAR-MOUNTED CRANE For sale is a very well-equipped Volvo FH 540 6x2 Globetrotter with an open flatbed, container locks, and a powerful FASSI F545RA.2.26 loading crane. The combination of low loading height, container locks, numerous lashing points, and the rear-mounted FASSI crane makes this vehicle ideally suited for container transport, machinery, construction, steel, and special transports, as well as general crane work. VEHICLE Iodpjzuxr Sefx Abmjif Make: Volvo Model: FH 540 Axle configuration: 6x2 Wheelbase: 5,600 mm Mileage: 309,153 km Unladen weight: 19,479 kg CHASSIS / DRIVE * 6x2 chassis * Fully air-suspended * Last axle liftable and steerable * Automatic transmission * Volvo VEB engine brake system * Very good configuration for heavy transport and crane work ### GLOBETROTTER CAB * Volvo Globetrotter cab * Air conditioning * Auxiliary heater * Comfortable long-haul cab * Plenty of storage space * Suitable for national and international transport OPEN FLATBED / CONTAINER TRANSPORT The vehicle is equipped with a versatile open flatbed. Loading area dimensions: * Length: approx. 6,300 mm * Width: approx. 2,550 mm * Loading height: approx. 1,120 mm Equipment: * Aluminum side boards * Container locks * Numerous lashing eyes / hook eyes * Suitable for container transport * Suitable for machinery and construction materials * Very versatile for various transport tasks The low loading height of only approx. 1.12 m is particularly interesting for the transport of taller machinery, containers and other loads. # FASSI F545RA.2.26 LOADING CRANE A powerful: FASSI F545RA.2.26 is mounted behind the loading area. Crane operating hours: only approx. 710 hours CRANE EQUIPMENT * 6-fold hydraulically extendable * Radio remote control * Rotator * 4-point outriggers * Additional oil cooler * Preparation for winch * Powerful hydraulic outriggers * Rear-mounted crane * Very few operating hours The FASSI F545RA.2.26 belongs to the heavy-duty loading crane class and offers an excellent combination of lifting force, reach and compact design. The rear mounting of the crane enables a very...

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. * 1.5-meter Lns Quick Load bar loader. Iedpfx Abszuxm Aemsif * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear stages. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitor. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar loader. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: used, mileage: 217,380 km, power: 338 kW (459.55 HP), first registration: 06/2024, fuel type: diesel, empty load weight: 8,419 kg, maximum load weight: 9,581 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 06/2026, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, navigation system, parking heater, Color: White, unladen weight: 8419 kg, permissible total weight: 18000 kg, 1st axle: 385/55 R22.5, 2nd axle: 315/70 R22.5, seats: fabric, interior color: anthracite, leaf-air suspension, retarder, fifth wheel coupling: JOST JSK37C-W 150, -660 mm, electronic braking system EBS, electronic stability program ESP, automatic climate control, auxiliary heater, adaptive cruise control ACC, heated seats, LED headlights, automatic headlight control, headlight range adjustment, Bluetooth hands-free system, rain sensor, adjustable steering column, sunroof, roof spoiler, fog lights, electrically adjustable and heated exterior mirrors, heated curb mirror, wide-angle mirror, immobilizer, central locking, wind deflectors, cooler box, axle load indicator, hill start assist, LED daytime running lights, connection plug 1x15-pin, coasting function, telematics system, side paneling, upper and lower bunk, EGR, SCR, formerly a rental vehicle, non-binding offer, subject to errors and prior sale. Image may not match the offer. Ijdpfx Aozvad Ejbmjif

Condition: used, mileage: 114,000 km, power: 350 kW (475.87 HP), first registration: 10/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Mercedes Benz Arocs 2648 /6x4/ TRUCK CRANE/MOUNTING CRANE/ROOFER CRANE!! GERMAN VEHICLE, all inspections performed at Mercedes Benz, original paint CRANE MKG/HMK 401 HPA 4 L/ wire rope winch, remote control 26 m fully hydraulic - 900 KG, plus 2 x mechanical up to 31 m - 400 KG. Iisdpfx Aozu Du Ssbmjf Axle load front axle 9.0 t, trailer brake 2-line, audio-navigation system Bluetooth comfort, exhaust downwards to the right, battery 220 Ah, air horn, electrical pre-wiring in the cab 24V / 100 A, suspension: rear leaf springs 2x13.0 t, suspension: front leaf springs 9.0 t, 4 leaves, parking brake additionally on front axle, luggage compartment on the upper part of the rear wall, transmission 12-speed - type: G 330-12, transmission lock for auxiliary drive, rear lights construction site version, info display 12.7 cm with video function, fuel tank: 390 L steel, left, air intake on the side of the cab, engine brake reinforced, auxiliary drive MB 124-10c, configurable special module, spare wheel, pipe breakage protection brake system, reversing warning acoustic (warning signal outside), rear cross member reinforced, drawer under dashboard, seats in the cab: armrest passenger seat, seats in the cab: driver's seat comfort suspension seat, sun visor outside, sun protection roller side windows, driver and passenger door, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on front axle), steel rims 9.00x22.5, socket 12V additionally, socket 24V in the passenger footwell additionally, stone guard grille, carpet on the engine tunnel, door extension for the cab, preparation for CB radio, preparation for reversing camera, front axle straight, ground clearance increased, additional thermal insulation, auxiliary heater (water), two-disc clutch Emission standard EURO 6, axle configuration: 6x4, trailer socket 24V / 15-pole, Arocs, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, cab: width 2.30 m, cab: cab entry movable, cab: tilting device hydraulic, cab: L StreamSpace, cab variant: StreamSpace, cab: steel-sprung, comfort, storage compartment outside left, storage compartment outside right, lifting roof electric, windshield tinted with band filter, preparation comfort bunk above, wide, curtain sleeping cabin, seats in the cab: driver's seat backrest foldable, suspension: leaf spring / leaf spring, power windows, vehicle without rear window, generator 100 A, urea tank (AdBlue): 60 L, rear axle bevel gear 233, interior filter: pollen filter, body/superstructure: chassis, comfort bunk below, comfort locking system, steering pump unregulated, air compressor 2-cylinder, air dryer heated, engine 12.8 L - 350 kW R6 Diesel (OM 471), engine compartment encapsulation, ramp mirror, waste heat recovery, disc brakes with partial protection, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger multi-function seat, stabilizer rear axle, stabilizer front axle, socket cab 24V, tachograph / EG control device, underrun protection rear fixed, preparation toll collection, water pump regulated, permissible total weight 26.0 t, oil cooler transmission.

Condition: new, functionality: fully functional, Jainnher Machine Co., Ltd. was established in 1982 and is dedicated to developing grinding machine technology, diversity and automation equipment. Jainnher is constantly offering new and improved machinery. Iijdpfxsnzib Ee Abmjf The new JAINNHER JHP-4015 CNC Plunge Type machine with FANUC CNC Control. Hydrostatic and Hydrodynamic bearings. Capacity Max ø work swing Ø400 mm Max grinding length 1500mm Max grinding dia. Ø380 mm Max workpiece weight 150 kgs Distance between centres 1500mm Centre height 200mm Grinding wheel Grinding wheel size Ø410 x 50-100 x 203.2mm Max peripheral 33 m/sec Wheel speed 1250rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 280mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Oil Pressure Hydrostatic = 20kg Hydrodynamic = 3kg Tailstock Retraction of quill 30mm Quill diameter 70mm Centre taper MT.4 ( MT.5 option) Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT.4 ( MT.5 option) Spindle type Telescopic (option Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +7º/-4º Rapid traverse speed 10m/min Max. travel 1500mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 7.5HP 4P(opt. 10.0HP) 4P Workhead motor 1.5KW Work table (Z axis) 1.8KW Work table (X axis) 1.8KW Hydraulic pump 1/4 HP 4P Wheel head pump Hydrostatic = 2.0HP Hydrodynamic = 1.0HP Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 60L Wheel head lubrication 50L Coolant tank 160L Machine N.W (Fully enclosed) 8080 kg G.W (Fully enclosed) 8480 kg Dimension (Fully enclosed) 4900 x 2100 x 2000mm Packing (Fully enclosed) 5090 x 2200 x 2200mm

Condition: new, Year of construction: 2025, functionality: fully functional, With a grinding diameter of 200mm x 300mm long, the JHP-2003CNC is the most compact plunge type grinding machine in the range and utilises the FANUC Oi-TF CNC control. Designed for heavier grinding applications, the JHP-2003CNC can accomadate workholding and components to 80kgs. This fully enclosed machine is supplied with Renishaw probing, full machine enclosure and mist collector. Jainnher CNC Plunge Cylindrical Grinding Machine Description: JHP-2003 CNC Capacity Max ø work swing 200mm dia Max grinding length 300mm Max grinding dia. 200mm dia Max workpiece weight 80 kgs Distance between centres 300mm Centre height 100mm Grinding wheel Grinding wheel size Ø405 x 50 x 127 Max peripheral 33 m/sec Wheel speed 1780rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 220mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Hydrodynamic pressure ----- Tailstock Retraction of sleeve 30mm Sleeve diameter D:48mm Iisdpfxonxk N So Abmsf Centre taper MT.3 Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT3 Spindle type Cartridge type Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +10º/-3º Rapid traverse speed 8mm/min Max. travel 640mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 5HP 4P(opt. 7.5HP) 4P Workhead motor 1.0KW Work table (Z axis) 1.2KW Work table (X axis) 1.2KW Hydraulic pump 1/4 HP 4P Wheel head pump ----- Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 30L Wheel head lubrication ----- Coolant tank 80L Machine N.W (Fully enclosed) 3800 kg G.W (Fully enclosed) 4100 kg Dimension (Fully enclosed) 3300 x 2100 x 2200mm Packing (Fully enclosed) 3500 x 2200 x 2200mm Jainnher CNC Plunge Cylindrical Grinding Machine Standard Accessories: JAINNHER JHP-2003CNC X-axis linear scale Work lamp Foot pedal Angle adjustment gauge Hydraulic tailstock with manual movement Grinding wheel and flange Tungsten carbide tipped centres (MT3) Automatic lubrication system Diamond dresser at lower worktable Magnetic separator MC-40/coolant tank/pump Levelling bolts and blocks Tool kits and toolbox Fully enclosed splash guard & oil mist device Touch probe gauge (Renishaw) Transformer

Condition: used, mileage: 1,248,100 km, power: 353 kW (479.95 HP), first registration: 06/2004, fuel type: diesel, empty load weight: 7,935 kg, maximum load weight: 10,065 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,700 mm, color: white, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, differential lock, parking heater, Color: White RAL1013, unladen weight: 7935 kg, permissible total weight: 18000 kg, 1st axle: 385/55 R22.5, 2nd axle: 315/70 R22.5, seats: fabric, interior color: anthracite, leaf-air suspension, retarder, analog tachograph, fifth wheel coupling: FISCHER SK-S36.20 2/185, 660 mm, electronic braking system (EBS), driver's seat: air-suspended, seat heating, radio, sound system, power steering, adjustable steering column, alloy wheels, electric windows, sunroof, fog lights, electric exterior mirrors, curb mirrors, wide-angle mirrors, immobilizer, CB radio, tuning, cooler box, ambient lighting, upper bunk: bunk above the driver's seat, pop-up roof, SHOWTRUCK, silo compressor and hydraulic folding exhaust, ALCOA alloy wheels. Consignment vehicle – vehicle sale is carried out on behalf of the owner, non-binding offer, subject to errors and prior sale. Image may not match the offer. Iedjzu Dn Eopfx Abmoif

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density Iisdpfxjzu S Dbs Abmjf • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • 1x build cylinder • 2x powder supply cylinders • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system Iedpfx Abozu Aibjmsif - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, mileage: 349,214 km, power: 315 kW (428.28 HP), first registration: 01/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, * ABS * ASR * ESP * Active Brake Assist Iodpezhyuuofx Abmeif * Lane Keeping Assist * Radio * Cruise Control * Hill Start Assist * Electric Windows * Electrically Adjustable Mirrors * Mirror Heating * Sunroof * Driver Comfort Seat * Seat Heating * Differential Lock, Rear Axle * Lifting/Steering Axle * Trailer Coupling * Duomatik Air Connection * Attention Assist * On-Board Computer * Central Locking * Rear Window * All-Round Warning Light, Orange * Fog Lights * Cornering Lights * Central Lubrication System * 12-Speed * Suspension: Leaf-Air * Payload: 11870 * Retarder: High Performance Engine Brake ----Special Body: Crane: Palfinger PK 19.001 SLD-B, maximum lifting capacity 6 tons, foldable, remote control + floor control, 3-fold hydraulic extension, oil cooler, 6th and 7th control circuit for swivel servo and grab operation. Read load chart: lifts at 4.1m-4.3t, 6.1m-2.8t, 8.1m-2.05t, 10.3m-1.6t.----Body: Meiller Roll-off Tipper RK 20.65 for 5-6.9 m container / total container length, 20,000 kg lifting capacity, remote control, pushing arm, hydraulically extendable underrun protection at the rear, additional hydraulic connections at the rear.----Windshield tinted Sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations.

Condition: used, mileage: 349,214 km, power: 315 kW (428.28 HP), first registration: 01/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, * ABS * ASR * ESP * Active Brake Assist * Lane Keeping Assist * Radio * Cruise Control * Hill Start Assist * Electric Windows * Electrically Adjustable Mirrors * Mirror Heating * Sunroof * Driver Comfort Seat * Seat Heating * Differential Lock, Rear Axle * Lift/Steering Axle * Trailer Coupling Ijdpszhyunjfx Abmsif * Duomatik Air Connection * Attention Assist * On-Board Computer * Central Locking * Rear Window * All-Round Amber Warning Light * Fog Lights * Cornering Lights * Central Lubrication System * 12-Speed * Suspension: Leaf Spring/Air Suspension * Payload: 11870 * Continuous Retarder: High Performance Engine Brake ----Special Body: Crane: Palfinger PK 19.001 SLD-B, maximum lifting capacity 6 tons, foldable, remote control + floor control, 3-stage hydraulic extension, oil cooler, 6th and 7th control circuits for rotary servo and grab operation. Recorded load chart: Lifts at 4.1 m - 4.3 t, 6.1 m - 2.8 t, 8.1 m - 2.05 t, 10.3 m - 1.6 t.----Body: Meiller Roll-Off Tipper RK 20.65 for 5-6.9 m containers/total container length, 20,000 kg lifting capacity, remote control, push arm, hydraulically extendable rear underrun protection, additional hydraulic connections at the rear.----Tinted windshield For sale to commercial businesses only. IN THE EVENT OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis for all purchase agreements, invoices, proforma invoices, orders, and sales negotiations are our General Terms and Conditions (see our legal notice for details).

Condition: good (used), mileage: 610,532 km, power: 345 kW (469.07 HP), first registration: 02/2022, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 4,070 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, traction control, = Additional Options and Accessories = - 2nd diesel tank - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Globetrotter XL - LED lamp - Manual - Radio/cassette - Lane departure warning system - Fabric - Blind spot sensor = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 8191 kg, Gross vehicle weight: 20100 kg, Total tank capacity: 1260 liters, 2nd diesel tank, Height of fifth wheel coupling: 111 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 380 tons, Suspension type: Air suspension, Type of cab: Globetrotter XL, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Parking cooler, Parking heater, Electric windows, Electric mirrors, Radio/cassette, Color: Black, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Air conditioning, Bluetooth, Blind spot sensor, Engine power: 345 kW (463 Hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Central locking, Seat configuration: 1+1, Seat covering: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: VOL, 12 gears, Automatic Axle Configuration Tire size: 315/70R22,5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 5 mm; Tire tread depth right: 5 mm; Suspension: Leaf suspension Axle 2: Dual tires; Tire tread depth left inner: 4 mm; Tire tread depth left outer: 3 mm; Tire tread depth right inner: 2 mm; Tire tread depth right outer: 4 mm; Suspension: Air suspension Weights Unladen weight: 8,191 kg Payload: 11,909 kg GVW: 20,100 kg Maintenance APK (Periodic Technical Inspection): valid until 03.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €990 per month (default, 60 months); Inquire about further information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands of different years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality Isdpfx Abjzuk Edsmjif • A good price • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, mileage: 201,421 km, power: 566 kW (769.54 HP), first registration: 07/2024, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,950 mm, fuel: diesel, color: silver, gearing type: automatic, emission class: euro6, suspension: air, total length: 7,550 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Scania S770 8x4/4 395 cm wheelbase - axle 1-3. Liftable and steerable front axle. Full air suspension. Hub reduction. Retarder. Hydraulic system. 3.5" adjustable fifth wheel. 12V - 24V socket. Rear view camera. Work lights. Parking cooler. Refrigerator. Leather seats. Alcoa wheels. Air horns. Flashing lights. = Further information = Technical information Number of cylinders: 8 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 80%; Tire tread depth right: 80% Front axle 2: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 1: Tire size: 315/80R22.5; Double tires; Tire tread depth left (inside): 80%; Tire tread depth left (outside): 80%; Tire tread depth right (inside): 80%; Tire tread depth right (outside): 80% Rear axle 2: Tire size: 315/80R22.5; Double tires; Tire tread depth left (inside): 45%; Tire tread depth left (outside): 45%; Tire tread depth right (inside): 45%; Tire tread depth right (outside): 45% Weights Unladen weight: 13,236 kg Payload: 30,764 kg GVW: 44,000 kg Isdpfezukk Tox Abmsif Financial information Price: On request Identification Model number: S770 8x4/4 / 180,000 KG / HYDRAU = Company information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT). We speak Russian. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 18,000 rpm, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, rotational speed (max.): 18,000 rpm, controller model: MAX 5, coolant supply: 40 bar, We are offering the following machine for sale directly on behalf of the owner. It was delivered in 2026, but due to changed requirements, it will not be used. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Iedpfx Aezu Nz Dsbmsif Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose – table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool interface: HSK63-A Speed max.: 18,000 rpm Power: 63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60 positions EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island detection - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: ready for operation (used), Compact Dovetail Joint Machine Capacity: approx. 4-6 joints/min. For wood sections with the following dimensions: Thickness: 30-120 mm Width: 75-250 mm Pressing force: 22.5 t Automatic glue application via 2 glue combs, designed for processing PUR glue. Spring-mounted with a safety cut-out that immediately stops the milling and glue application feed in case of even the slightest load. All parts are chrome-plated. Electrical system with PLC Milling motor power: 22.00 kW Hydraulic unit: 29.50 kW Oil cooler: 0.75 kW Infeed feed: 1.50 kW Outfeed feed: 2.50 kW Cut-off saw: 3.00 kW Ijdpfx Aozmmr Rebmoif Total power consumption: 59.25 kW = 120 Amperes

Condition: excellent (used), functionality: fully functional, mileage: 344,736 km, power: 285 kW (387.49 HP), first registration: 12/2020, axle configuration: 4x2, next inspection (TÜV): 10/2026, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6d, suspension: steel-air, number of beds: 1, Year of construction: 2020, Equipment: air conditioning, cruise control, fridge, full service history, lane keeping assist, parking heater, seat heater, Volvo FM 380/Leaf/Air Suspension/Euro 6/Intarder/MOT: Oct. 2026 • Manufacturer: Volvo • Model: FH 380 • Mileage: 344,736 km • First Registration: 01.12.2020 • Power: 285 kW/387 hp • Transmission: Automatic • Axle Configuration: 4x2 • Suspension: Leaf/Air • Intarder • Rearview Camera • Air Conditioning • Navigation System • Long-Haul Cab • Lane Keeping Assist • Roof Hatch • Auxiliary Heater • Cooler Box • MOT: 10.2026 • Unladen Weight: 6,917 kg • Payload: 11,083 kg • Permissible Total Weight: 18,000 kg • Euro: 6D • German Vehicle Iiodpfx Abezuy Iujmsf • German Documents • Immediately Ready for Use • This offer is non-binding and subject to change. • Subject to prior sale. • Errors and/or typos not excluded. • Sale subject to our General Terms and Conditions.