Used Copy Punch for sale (2,090)

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides Ncjdoza Eu Ejpfx Ac Tsu - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: used, functionality: fully functional, For sale is a MABI 8Z dished end punch which we used as a multi-hole punch. Ncedjx Dbunspfx Ac Tou

Condition: good (used), Year of construction: 2008, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control system: Sinumerik 840D Standard equipment: - Sturdy C-frame - Coordinate guidance with integrated linear magazine, 25 positions for tools and clamping jaws - 4 clamping jaws - Automatic part slide 500 x 500 mm - Drives: Maintenance-free three-phase servo motors Punch head: - Hydraulic mono-tool holder - 360-degree rotation for all tools - Automatic tool length compensation - Tool spray lubrication - 2nd lubricant tank - Programmable wiper movement Nodpfsza Elqsx Ac Tscu - Punch slug extraction - Programmable clamping device for re-clamping with pre-selectable clamping force - Bulge detection Control system: - 10.4-inch TFT display - Simple operation - Diagnostic function - Integrated 3.5-inch floppy disk drive - RJ45 network connection Safety: - CE marking - Multi-beam light barriers - Rapid shut-off of hydraulics + Multitool function + MultiBend function + Thread forming function + Marking/fast beading function + Deburring and rolling technology + Individually opening clamping jaw + Re-clamping cylinder + Sensor for part slide + Vibration-damped installation + Automatic shut-off + Chip conveyor + MDE interface + ToolMaster 70

Condition: good (used), functionality: fully functional, Year of construction: 2011, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Standard Equipment: Machine - Work area 3050 x 1550 mm - Robust, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase motors - Repositioning device with programmable clamping system - Foot pedal for closing clamping claws - Ball tables - Two parts collection containers - Chip container - Initial oil fill - Transport and assembly device - ContourLine - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Quick flap for laser parts 500 x 500 mm including sensor for part chute - Liftable laser cutting support - Slug detection TRUMPF Laser - Laser TruFlow 2700 with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control system TASC - Enclosed beam guidance - Beam pipe ventilation with compressed air Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - ControlLine Programming - Extended workshop programming (TruTops via network access) Punching Station - Electro-hydraulic punching head - Rotating mono-tool holder - Tool length compensation - Programmable clamping system with manually adjustable clamping force - Stroke counter for punch - Spray lubrication for punch - Punch slug extraction - Deflection detection - Flap for punching parts 500 x 500 mm including sensor for part chute - Reaching the fill level in the punching console - Level monitoring for thread forming and tool lubrication Control System - TRUMPF control system based on Rexroth IndraMotion MTX Ncodsza A Hljpfx Ac Tsu - External control panel with 15" TFT touchscreen - Hard drive with 160 GB storage capacity - Integrated technology data - Teleservice via internet - Integrated e-shop - Programmable cutting gas pressure - Automatic shutdown - Production plan Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Dual light curtains - Monitoring system for gas pressure, temperature, coolant, among others - Quick stop - Protection against scattered radiation - Compact dust extraction system - TruFlow 4000 including LensLine - Automatic nozzle changer - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Deburring and rolling technology - Active die - StripLine - Adaptive stroke calibration - Spray lubrication for die - 4 individually opening clamping claws - Repositioning cylinder - Vibration-damped mounting - Chip conveyor with tipping container - Brush tables with loading and unloading assistance - Blowing device for small parts Automation: SheetMaster - Suction frame 3000 x 1500 mm with 36 suction cups (y-axis = 400 mm) - Adjustable suction rails (v-axis = 120 mm) - Peeling suction - Vacuum sensor for each suction cup - Sheet thickness sensor for double sheet detection - Automatic clamping claw closing on machine - Central lubrication - Main-time parallel loading and unloading of SheetMaster - Unloading monitoring GripMaster special arrangement 4m: - Scrap grid tongs with sensor - Scissor lift table 400 mm

Condition: good (used), Year of construction: 1979, total height: 1,750 mm, total width: 800 mm, total length: 1,200 mm, sheet thickness steel (max.): 3 mm, working range: 960 mm, overall weight: 750 kg, power: 0.37 kW (0.50 HP), Copy nibbler PIONIER KNA 600, steel capacity 3 mm, circular nibbling up to Ø 1000 mm, throat depth 600 mm, throat height 90 mm, motor 0.3 kW, stroke 0-12 mm, dimensions 1400x800x1750 mm, weight 400 kg Ncjdpfeyq Sc Dsx Ac Tsu

Condition: good (used), Year of construction: 1979, total height: 1,805 mm, total width: 1,700 mm, total length: 2,090 mm, sheet thickness steel (max.): 3 mm, working range: 960 mm, overall weight: 1,200 kg, Copy nibbling machine PIONIER K 1200/6, steel capacity 6 mm, circular nibbling up to Ø 500 mm, throat depth 1220 mm, throat height 200 mm, working length 960 mm, motor 1.3 / 2.2 kW, stroke 10 mm, dimensions 2090x1400x1800 mm, weight 1200 kg, operating manual Nsdpfeyq Savsx Ac Tecu

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Ncsdpfx Asxmfc Uoc Tju Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: good (used), Year of construction: 2004, Item No.: Lg 34522 High-performance punching machine HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture 2004 (without soundproof cabin) with - continuously adjustable drive - 2-connecting rod drive - pneumatic clutch-brake combination - stroke adjustment - Siemens PC 670 screen control - oil circulation lubrication Technical data Ncsdpfx Ajip Uqmsc Teu Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 Stroke 12 to 60 mm Installation height (max, stroke and upper die) 320 mm Frame width 1,250 mm Table area 1,250 x 730 mm Die opening in the table 1,160 x 140 mm Punch area 1,250 x 450 mm Punch adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feed VAMCO SP 150 Year of manufacture 2014 Pass width max. 150 mm Material thickness max. 3.0 mm

Condition: used, machine/vehicle number: 4131, Item No. Lg 34422 Ncsdpfxsinzdls Ac Teu High-performance stamping press BRUDERER BSTA 60 H from current production. Stroke adjustment needs to be repaired. without soundproof cabin and without conveyor system. Feeder BBV 202/120

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 4422559493014, Equipment: CE marking, Peddimax 600 Njdpfx Acjrknnfe Tjcu Equipment - Flat, profile, and bar steel shear - Notching & punching unit 600 kN - Mechanically adjustable profile and flat steel hold-down device - Quick-change punch system Punching table - Universal punch saddle - Material support table for notching device - Various punches and dies

Condition: excellent (used), Year of construction: 2012, working area X .. 370 mm working area Y .. 700 mm pressure 28.0 t plate thickness max. 12.7 mm ST throat 310 mm height of stroke 0 - 40 mm no. of strokes max. 180 Hub/min punch diameter max. 105 mm 845 x 1420 mm work height max. 900 mm oil volume 50.0 l total power requirement 5.0 kW weight of the machine ca. 1800 kg range L-W-H 1800 x 1200 x 1500 mm New price including accessories approx. 35,000 euros Special price on request !! The machine was used continuously in a test area and as a result has very few operating hours !!! Nodpfx Ajy Umdfec Tocu The ECCO LINE hydraulic punching machine has been specially optimized for the processing of sheet metal and profile parts. It is characterized by its The machines of the ECCO LINE series are equipped with a punching force of LINE series are equipped with 28 tons of punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 sec (manual) Mode of operation: After installing the tool, the stops are positioned in X and Y are positioned accordingly and the material is pushed against the stops. By the hole is then punched by pressing the foot pedal Features of the machine: - Maintenance-free hydraulic drive - Stepless stroke adjustment - Compact unit - Constant punching force Features: - Robust electro-hydraulic hole punch - TRUMPF tool system with many insert tools - Stop system with digital displays * Magnetic scale integrated into the side of the machine table * Scanning head integrated in the stops * Energy guiding chains for supply line to the scanning head * Evaluation electronics * Position indicators mounted on the stops * Stake-out device for zeroing the axes * Readout accuracy /- 0.1 mm - Control panel: set-up, single and continuous stroke - Stepless stroke height adjustment - Free-moving foot switch * with many punching tools !

Condition: good (used), Year of construction: 2000, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, rotational speed (max.): 12,000 rpm, I am offering my Rotox KF 347 copy milling machine for sale, which is in good condition. It is fully functional and ready for use in your workshop. -Model: Rotox KF 347 Nedpfxoyxy Nce Ac Tscu -Power: 1.5 kW -12,000 RPM -Year of manufacture: 2000 -Voltage: 400 volts -Condition: Very good and fully functional The machine is available for demonstration and can be tested at any time.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 070804, punching force: 16 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,070 mm, travel distance Y-axis: 1,280 mm, punching diameter: 76 mm, TECHNICAL DETAILS Punching force: 165 kN Working area: 2,070 x 1,280 mm Sheet thickness: 6.4 mm Workpiece weight: 150 kg Punch diameter: 76.2 mm X-axis speed: 80 m/min Y-axis speed: 55 m/min Control system: CC 220 MACHINE DETAILS Machine weight: approx. 8,000 kg Njdpfjzapqdsx Ac Tecu

Condition: excellent (used), Year of construction: 2000, operating hours: 40,000 h, functionality: fully functional, sheet thickness (max.): 4 mm, overall weight: 11,000 kg, table width: 1,250 mm, table length: 2,500 mm, controller manufacturer: Bosch, controller model: Bosch, power: 12 kW (16.32 HP), warranty duration: 3 months, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, foot remote control, safety light barrier, We offer this TRUMPF TRUMATIC 500R machine in very good condition, a punching and nibbling machine manufactured in 2000. Ncsdpfxjza Nigs Ac Tou These machines are virtually indestructible and highly reliable. The machine has 40,000 operating hours. A Black Box for connecting to a LAN network is included. For an additional fee, a Tru-Tops software license can be added. The machine is stored in a dry and heated hall in its transport position and is fully functional, having been replaced by a newer model. We can arrange for a TRUMPF technician to be available within the EU and provide any information about the machine in German. If you are interested, a TRUMPF technician who is familiar with the machine will communicate with you. The photos are for illustrative purposes only. If you have any questions or need further information, please do not hesitate to contact us.

Condition: used, KABBERT Körnerpresse – Duct Corner Insertion & Press Machine A high-quality, German-engineered press machine specifically designed for the fast and secure locking of metal corner pieces into rectangular duct flanges. The Kabbert Körnerpresse replaces manual hammering, using a powerful mechanical press mechanism to lock the corner elements tightly into the profile joints for an airtight and rigid connection. Specifications • Manufacturer: Kabbert GmbH (Germany) • Type / Model: Körnerpresse (Flange Corner Press) • Machine No. (Masch. Nr.): 310616 Nsdpfxezbqk Ue Ac Tjcu • Application: Inserting, pressing, and locking corner pieces into rectangular ventilation duct profiles. • Maximum Sheet Thickness (Blechstärke): max. 1.5 mm • Machine Weight (Gewicht): 50 kg Key Features & Components • Precise Corner Locking: Specifically designed to press and secure metal corners at the joints of profile flanges, ensuring a perfectly aligned and rigid duct frame. • High-Speed Assembly: Eliminates intensive manual labor and hammering, significantly speeding up the final assembly of rectangular duct sections. • Preserves Galvanized Coating: The cold-pressing technology forms a strong mechanical lock without scratching, burning, or damaging the zinc layer, maintaining full corrosion resistance. • Compact & Portable: Weighing only 50 kg, the machine is highly space-saving, easy to relocate, and fits seamlessly into any workshop layout. • Heavy-Duty German Quality: Built to industrial standards for reliable, repeatable, and trouble-free operation under daily workshop loads. Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: good (used), Year of construction: 1992, Hydraulic hole-punching machine, manufacturer: Häwa, year of manufacture: 1992. Operating pressure: 400 bar, with electrically adjustable height-adjustable support table. Ncodpsgbk R Usfx Ac Tju Machine is ready for operation.

Year of construction: 2001, condition: good (used), Hydraulic punching machine Fabr.EDEL Type: POWERPROFI 205 Bj.2001 with many accessories In good condition . Punching force 200 kN throat 560 mm Tools up to 100 mm Die thickness: 0.5 to approx. 10 mm. Further data see data sheet . Ncsdpfx Aoqwg Acjc Tsu

Condition: good (used), Year of construction: 2002, functionality: fully functional, punching force: 20 t, TECHNICAL DETAILS Machine capacity: 200 kN (20 t) Air pressure: 5 bar Air flow rate: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travelling ranges: Machine travel range without repositioning: 1,250 mm x 2,100 mm Processing Max. sheet thickness with ball bearing table: 6 mm Max. sheet thickness with brush table: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Performance Ncsdpfsy Symuox Ac Tou Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling cycle, feed 1 mm: X920 / Y920 Tools Minimum programmable step: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, laser type: fiber laser, power: 2 kW (2.72 HP), warranty duration: 24 months, Equipment: CE marking, The Yawei HPML30510 is a combined laser punching and cutting system for highly precise and efficient sheet metal processing in industrial applications. The machine combines servo-electric punching with laser cutting, achieving high processing speeds while maintaining low energy consumption. Thanks to its robust construction, automated systems, and modern CNC technology, the HPML30510 is particularly suitable for demanding series production. Ncedpfx Acoy U E H Ee Tju This is a measuring machine, in stock, immediately available, in new condition, and is offered with delivery (within Germany), commissioning, warranty, etc. Operating Mode: Servo Punching / Laser Cutting Punching Force: 294 (30) kN (tons) Laser Power: 2 kW Max. Processing Size (Punching): 1600 x 3000 mm Max. Processing Size (Cutting): 1500 x 2500 mm Max. Material Thickness: 6.35 mm (ball) / 3 mm (brush) Max. Punching Diameter: 88.9 mm Stroke Rate: 2000 cycles per minute (cpm) Punching Frequency (1 mm pitch): 700 cpm Punching Frequency (25.4 mm pitch): 400 cpm Accuracy (Punching/Cutting): ±0.10 mm Combined Accuracy: ±0.15 mm Clamps: 4 pcs Tool Stations: 38 pcs CNC System: Siemens 840Dsl CNC Axes: 11 Max. Sheet Metal Speed: 102 m/min Turret Speed: 30 rpm Max. Load: 180 kg Dimensions (Length): 8000 mm Dimensions (Width): 8000 mm Dimensions (Height): 2300 mm Machine Weight: 20000 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0164390271794, Offer 26137 Hydraulic combination flat bar shear with notching device and punch press Technical data: - Flat bar shear - Blade length 360 mm - For flat material 350 x 13 mm - or 230 x 20 mm - Profile steel shear - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Round bar shear - Round steel 50 mm - Square steel 42 mm Nsdpfjy Uwu Uox Ac Tecu - Notching device - For material up to 12 mm - Right-hand notching up to 52 x 90 mm - Punch press - Punching force approx. 550 kN - Stroke, infinitely adjustable 0 - 60 mm - Punches holes in steel up to 30 mm diameter in 16 mm - Overhang 320 mm - Hydraulic drive 400 V / 5.5 kW - Two separate working cylinders and separate foot switches for each - Space requirement approx. W 1400 x H 1600 x D 750 mm - Weight approx. 1300 kg - Includes: - Various punches and dies in a separate tool cabinet - Support and stop table - Stop

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, ELUMATEC AS 170 – Single-spindle profiling machine Technical data Milling area, horizontal, against stop: 300 x 120 mm Milling area, horizontal, using template: 285 x 110 mm Milling spindle speed: 12,000 rpm Profile clamping range: 150 x 130 mm, adjustable up to 400 mm Stroke: 105 mm Electrical connection: 230/400 V, 3 ~, 50 Hz Power output: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device Ncsdpfxoza Iifj Ac Teu 24 l with spray device Dimensions AS 170/00 Length: 780 mm Depth: 770 mm Height: 1,500 mm Weight: 200 kg Features Large milling area despite compact design Profiling using side stops or templates (1:1) Pneumatic, two-stage tracing device for different cutter diameters Patented suspension of the tracing lever for precise milling Table height adjustment for profiles up to 400 mm high “Spindle Lock” for quick tool changes Pneumatic material clamping device Metering spray device

Condition: ready for operation (used), Year of construction: 1995, operating hours: 51,658 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Sheet width: 2,500 mm Sheet length: 1,250 mm Sheet thickness: 8 mm Punching force: 220 kN Nodpfx Asy U U Npsc Tjcu MACHINE DETAILS Operating hours: 51,658 h Machine weight: approx. 11,050 kg EQUIPMENT - TRUMPF Sheetmaster

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Sheet metal thickness - max.: 6.4 mm Punching diameter: 76.2 mm Travel distance X-axis: 2,500 mm Travel distance Y-axis: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Ncodpsy U U Edjfx Ac Tou Positioning speed (rotary axis): 360 °/sec Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions: 6,400 x 5,800 x 2,100 mm Machine weight approx.: 11,050 kg Operating hours: 30,430 h

Condition: ready for operation (used), Year of construction: 2014, operating hours: 65,000 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 200 kg, Machine with SheetMaster TECHNICAL DETAILS Travel range of the X-axis during punching: 3,050 mm Travel range of the Y-axis during punching: 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 200 kg Punching force: max. 220 kN Nsdpfx Acsy U Ut Is Tscu Stroke rates Punching stroke rate at 1 mm: 1,350 min⁻¹ Marking stroke rate: 3,000 min⁻¹ Part removal Part size, part flap during punching: max. 500 x 500 mm Part size, fixed chute during punching with a moving table: max. 80 x 50 mm MACHINE DETAILS Operating hours: 65,000 h Space requirement: 7,395 x 6,540 x 2,072 mm Power consumption, auto-shutdown active: 0.5 kW Power consumption during production: 9.5 kW

Condition: ready for operation (used), Year of construction: 2008, operating hours: 59,000 h, functionality: fully functional, punching force: 18 t, working width: 1,270 mm, working height: 2,540 mm, punching diameter: 76 mm, sheet thickness (max.): 6 mm, TECHNICAL DETAILS Working area: 2,540 x 1,270 mm Punching force: 18 t Sheet thickness: max. 6.4 mm Workpiece weight: max. 150 kg Punching diameter: max. 76.2 mm Speed: max. 90/60/108 m/min Accuracy: 0.1 mm MACHINE DETAILS Control system: Bosch Type 3 Length: 5,500 mm Width: 5,900 mm Nodpfx Aoy U Ub Soc Tscu Height: 2,200 mm Weight: 11,400 kg EQUIPMENT - Sturdy, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 19 tool stations - 2 clamping devices - Drives with maintenance-free AC servo motors - Follow-up device with programmable dwell function - Ball tables - Partial slide 180 x 200 mm - 2 finished parts containers - Chip container - Automatic shut-down