Used Corona Roller Separator for sale (14,417)

Condition: used, Technical specifications: Max. planing width: 240 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: bottom right left top Iedov Hzh Dopfx Abyotk bottom Each spindle driven by a separate motor Number of upper steel feed rollers: 4 Number of upper rubber feed rollers: 2 Extraction port diameter: 150 mm Infinitely variable feed speed control Feed through cardan shafts Lubrication pump for the work table Pressure: 6 atm Electric lifting of machine body Power supply: 380 V Total power: 31 kW Overall dimensions: Length: 4000 mm Width: 1740 mm Height: 1730 mm

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Iodpfxezdpvgj Abystk Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension Itjdpoy Iu N Asfx Abyok With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: used, Year of construction: 2017, Working widths 1600 mm Roller width 1800 mm Number of rollers 2 x s-rolls Stück Swimming roll - dia 190 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 9 to liquor trough withunder-liquor squeezing 4 rolls Capacity of dye tub ca. 48 Liter Cloth guiding system for woven fabrics curved spreader Hydraulic unit for separately pressure Drive shaft • Dye-Padder with two Swimming Rolls (S-rolls) and a small basin for CPB-dyeing, • Machine will be completely overhauled before delivery, we supply with warranty (Photo shows an overhauled machine in delivery-status), Iedstv H T Sjpfx Abystk • Without drive, it must be adapted when mounting in a plant or as single machine

Condition: excellent (used), Technical data: Max planing width: 210 mm Max planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 4 Spindle arrangement: bottom right left top Itodpowv Sxkefx Abyok Each spindle powered by a separate motor Toothed feed roller in the table before the first head Number of upper steel feed rollers: 6 Number of upper rubber feed rollers: 1 Extraction port diameter: 4x130 mm Continuously variable feed speed Feed drive via cardan shafts Lubrication pump for worktable 1 smooth roller in the table Pressure: 6 atm Electric elevation of machine body Power supply: 400 V Total power: 23 kW Overall dimensions: Length: 3580 mm Width: 1700 mm Height: 1800 mm

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame Iedpfxszuzcts Abystk - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S

Condition: ready for operation (used), Year of construction: 1995, This SCHELLING FLM 365.002 panel saw was manufactured in 1995. It features a main saw blade diameter of 400 mm and a scoring saw blade diameter of 200 mm, with a maximum saw blade projection of 80 mm. The machine is capable of processing materials like acrylic and glass-fiber reinforced plastic, with a maximum panel length of 3000 mm and a maximum thickness of 80 mm for acrylic. Consider the opportunity to buy this SCHELLING FLM 365.002 panel saw. Contact us for further details. • Technical data: • Main saw blade diameter: 400 mm • Scoring saw blade diameter: 200 mm • Max. saw blade projection: 80 mm • Max. clamp opening: 100 mm • Max. stack height: 60 mm • Main motor power (50/60 Hz): 15 / 18 kW • Saw unit feed speed: 0.2 – 22 m/min • Saw unit return speed: 22 m/min • Forward feed speed: 10 m/min • Backward feed speed: 10 m/min • Working height: 930 mm • Performance and requirements: • Processable materials: Acrylic, glass-fiber reinforced plastic (GFRP) • Max. panel length: 3000 mm • Max. panel width: 2200 mm • Max. thickness (Acrylic): 80 mm • Max. thickness (GFRP): 60 mm • Edges: deburred • Panel flatness: max. wave 5 mm • Thickness tolerance: ±0.2 mm • Electrical power consumption: approx. 25 kW • Supply voltage: 380 V / 50 Hz • Compressed air requirement: approx. 100 l/min (6 bar) • Extraction requirement: approx. 4000 m³/h (air speed 32 m/s) • Equipment (included with the machine): • Scoring unit • Servo-driven feed (0 – 40 m/min) • Side guides on roller table, automatic adjustment; adjustment range 80 – 2200 mm • Safety light curtain with separate support frame • Hold-down clamps (according to machine configuration) • Cooling and spraying system • Computer control – COMMANDER (PLC/SPS) with display, membrane keyboard, diagnostic system • Graphical display of cutting plans • Electrical cabinet and control integrated in the machine Iedpfxozugu Is Abyotk • Slow scoring / pre-cut function

Condition: used, Used automatic shot blasting machine from KF Strahltechnik for sale. The machine is designed for the automatic shot blasting of profiles, sheet metal, and steel structures. The four blast wheels/turbines make the machine suitable for efficient processing of the top and bottom surfaces of workpieces. The machine is in good condition and is currently in operation. An inspection and test run at our facility are possible by arrangement. Technical data: Manufacturer: KF Strahltechnik Machine type: Automatic shot blasting machine Number of turbines: 4 Maximum workpiece width: 800 mm Maximum workpiece height: 400 mm Suitable for: Profiles, sheet metal parts, steel structures, and similar workpieces Processing: Shot blasting of the top and bottom surfaces Roller conveyor at the front: approx. 6 m Roller conveyor at the rear: approx. 6 m Ijdekw Ukujpfx Abyetk Condition: Good, currently in operation Inspection: Possible at the facility Test run: Possible by arrangement Delivery and sales conditions The stated price is the ex-works price for direct collection. Dismantling, loading, transport, and installation/commissioning at the new location are not included in the price and can be offered separately if required. The machine is sold used and in its current condition. An inspection and examination before purchase is expressly possible. ✅ Automatic shot blasting machine from KF Strahltechnik ✅ 4 turbines/blast wheels ✅ For profiles and sheet metal parts up to 800 x 400 mm ✅ Roller conveyors at the front and rear, each approx. 6 m ✅ Currently in operation and in good condition ✅ Inspection and test run possible at the facility ✅ Price ex-works, dismantling and installation optionally available at an extra charge

Condition: used, Year of construction: 2018, operating hours: 5,690 h, mileage: 89,600 km, power: 55 kW (74.78 HP), empty load weight: 15,000 kg, Operating hours: 5,690, First registration: 23.02.2018 Carrier vehicle: DB Atego 1324 #WDB96752620163901 Basic equipment VT 651 Exhaust air blower: Control speed variable between 2,400 rpm and 3,500 rpm, suitable for the respective application. Driven by the auxiliary engine via the reduction gearbox and fluid coupling. Gearbox ratio: 1.79:1 Disc brushes: Quick-release brush system with infinitely variable speed up to 200 rpm (controlled from the cab). Suction nozzle: Cast aluminum suction nozzle with a 250 mm inlet opening and tool-free adjustment. Sweeping roller: Quick-release brush system with a nominal rotational speed of 160 rpm. Dust suppression system: Spray nozzles for dust suppression at the suction nozzle(s), disc brushes, and at the vehicle front. Pressadrain water expulsion system. Electrical system: 24 volts. All external wiring harness connections rated to automotive standard IP67. Controls: Main control panel centrally mounted in the cab with Johnston Video Monitor (JVM) provides information on a wide range of sweeping functions and allows download of recorded data. Up to four cameras (optional accessories) can also be monitored on the JVM screen. A separate palm-rest control includes controls for main sweeping functions and is mounted on the door side. Ijdpfx Abou Ay Tzeyotk Superstructure and hood: The superstructure consists of the debris container and the integrated water tank, manufactured from high-performance stainless steel sheet. The hood is lined with frequency-adaptive sound-absorbing material. The water tank is equipped with baffle plates and filled via a hydrant filling port type "A". A dual, dry-run-protected diaphragm pump runs continuously. Watertight rear door with double locking system and drainage function. Two side access doors on the superstructure. Insertable superstructure floor as a transfer port for use as a street washer. Rear discharge chute, double amber beacons at the rear protected by wire cages. Automatic multi-positional body support mechanism and side-mounted storage compartments as standard features. Special features: - Special painting LA1 2603 deep orange - Water recycling - High-pressure washing system - Hand suction hose - Brush tilt adjustment from cab - Manual water valves in cab Optional equipment: - Side underrun protection left - Relocated battery box - TÜV approval - Chassis programming - Tachograph inspection and sealing Location: 54595 Prüm

Year of construction: 2005, condition: used, - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Used destacking unit Manufacturer: Meinert Type: AM 33 - 3000 /1300 Systems Year of manufacture: 2005 Technical data - max. 28 cycles/min for single stacks Iedjzuz N Tspfx Abyetk - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Design - Infeed belt conveyor in front of the system (special version: pneumatically adjustable for collecting 2 parts on top of each other) - Infeed belt conveyor in the paternoster - 2 paternoster walls – fixed side and motor-adjustable loose side - Synchronized stop adjustment – infeed and stacking positions AM 33: 2 stacking positions on one lifting device with powered roller conveyor - Personnel protection consisting of safety grilles and automatic sliding gates - Control cabinet according to VDE regulations - PC control in a separate PC cabinet Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, Features: Condition: Fully functional, with signs of use Ideal for rapid material transport Professionally dismantled and packaged 90° roller conveyor curve Model: Round belt year: 2016 Manufacturer: AMI Fördertechnik Condition: Used Overall width (outside): approx. 2100 mm Overall width (inside): approx. 1130 mm Conveying width incl. motor: approx. 700 mm Conveying width without motor: approx. 600 mm Roller pitch/axle distance: approx. 80/130 mm Frame made of steel Frame height: approx. 125 mm Frame width: approx. 35 mm Color: Light grey Includes SEW motor (0.37 kW) Includes side guides Feet to be ordered separately Stock: 2 units Price per unit The conveyor system was in operation until it was dismantled. Thanks to the excellent workmanship, your materials will glide smoothly to their destination, even under heavy loads. Tailored solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic systems for loading and unloading your goods, we are your competent partner! We are happy to provide you with a customised offer or advise you on system design or installation questions. Just let us know your requirements and site conditions. Isdpfx Aepl Uypebyetk Benefit from our many years of experience and our outstanding network of specialists. We have already successfully completed projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, skilled trades, or the electronics sector. Together we will find ways to optimise your process and material flow in a cost-effective and sustainable way. We can also offer fully automated sorting technology or additional components such as order picking racks or bins.

Condition: used, Technical data: Max planing width: 240 mm Max planing height: 130 mm Spindle diameter: 400 mm Number of spindles: 4 Spindle order: bottom right left top Each spindle on a separate engine Toothed roller in the table before the first head Itjdpfx Absv Um Tbjyek Number of upper steel pulling rollers: 4 Number of upper rubber pulling rollers: 1 Smooth feed adjustment Feed on cardans Worktable lubrication pump 2 smooth rollers in the table Pressure: 6 atm. Electric lifting of the body Power supply: 400 V Total power: 28 kW Overall dimensions: Length: 3780 mm Width: 1800 mm Height: 1800 mm

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 10000241, workpiece height (max.): 160 mm, workpiece width (max.): 310 mm, number of spindles: 4, WEINIG POWERMAT 1500 - SPECIAL MACHINE CONFIGURED FOR MILLING WOODEN DOOR FRAME PANELS Itodsuygcwjpfx Abysk Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 10 - 160mm (with tool flight circle 93-163 mm)Description of machine parameters Number of spindles 4 Spindles bottom 1 Spindles right 1 Spindles left 1 Spindles top 1 Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: used, Year of construction: 2015, operating hours: 10,900 h, functionality: fully functional, overall weight: 19,000 kg, Model: Fine Shredder Doppstadt AK 510 BioPower Year of manufacture: 06/2015 Serial No.: 983 Location: NRW Operating hours: approx. 10,900 hrs Availability: short-term, by arrangement Standard equipment: - Central axle trailer chassis for 80 km/h - Brake system with ABS according to EC directive - 50 mm EC towing eye, bolt-on shoe - Tyres 285/65 R 22.5 - Permissible total weight 19,000 kg - Mercedes-Benz engine OM 460 LA, 375 kW at 2,000 rpm, emission standard Euro Mot III B - Load-dependent feed control incl. automatic scraper conveyor reversal - Fuel tank 600 liters - Complete radio remote control - Hydraulic drive - Hydraulic support legs - Separate drive for feed roller/scraper conveyor 'TwinDrive' - Painted in RAL 2011 deep orange Condition of the machine: Itodpfsy Sam Ujx Abyek The machine is in technically and visually good and ready-to-use condition. New diesel engine at 10,310 operating hours! Warranty: The machine is sold in the condition existing at the time of delivery. The seller assumes no liability for defects.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, power: 375.1 kW (509.99 HP), year of last overhaul: 2026, Mobile shredder DOPPSTADT AK 535 compact Fine shredding basket; hole-size can be agreed. Foldable discharge conveyor with magnetic head pulley (magnet roll) Itedpfxjy A Iv Ee Abyok Twin-drive (separate drives for infeed roller and scraper floor) Hydraulically self propelled drive (for moving on site) Radio remote control

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Ijdpfx Abet Dx U Sjyjtk Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Siemens Sinumerik ONE control system, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, 24-position tool changer, Linear axis speeds X/Y/Z 24 m/min, Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor, Renishaw probing system kit, Coolant spray gun, Enclosure roof, Internal high-pressure cooling 20 bar, Bed flushing via M-function, Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator Ø 150 mm, 4th axis package, Itodpfxjza Apas Abyok LEHMANN rotary table EA-520.L, with automatic spindle clamping, Center height: 180 mm, Compact and stable tailstock with large roller bearing, Prepared for automatic clamping, Permissible hydraulic pressure max. 220 bar, Steel clamping bridge L/W 600/270 mm, Base plate steel, Tropical package, Active cooling unit for control cabinet, Blow-off air externally and internally (through spindle center) can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 2100 spindle hours.

Condition: used, Year of construction: 2016, Year: 2016 Condition: very good Counter state: 10.4 mil Configuration: - 2 x Collators DSC 10/60 ( 20 bins ) - LUL - HM hand marry + ejaction unit - 1 x DMB 600 - stitching and folding unit - 1 x DBM 600T - face trimmer - 1 x long delivery Technical Specification - Duplo DSC 10/60 - Paper Size and Media - Minimum size: approx. 120 × 148 mm - Maximum size: approx. 350 × 500 mm - (up to 350 × 610 mm for some versions) - Paper weight: - standard: approx. 52–300 g/m² - coated paper: approx. 79–300 g/m² - Media types: loose sheets, folded sheets, cross-folded sheets Capacity and Performance - Bin capacity: approx. 60–65 mm per station - Collating speed: up to 9,000–10,000 sets/hour (depending on configuration) - Inline production speed: approx. 4,000–5,000 booklets/hour Feeding and Transport System - vacuum belt feeding with air separation (Air Management System) - Error detection: double sheet detection, missing sheet detection, paper jam detection - Additional features: automatic calibration for different paper types Technical Specification - Duplo DBM-600 / DBM-600T (Stitching & Folding Unit – 600i Booklet System) - Paper Size and Media - Sheet size (min.): approx. 105 × 170 mm - Sheet size (max.): approx. 356 × 508 mm - (up to 230 × 610 mm for long sheets) - Supported formats: - A4, A3, B4, B5, Letter, Legal (various orientations) Capacity and Performance - Production speed: up to 5,200 booklets/hour - 2-up production speed: up to 9,000 booklets/hour (with trimmer) - Folding capacity: up to 30 sheets (80 gsm) - Stitching capacity: up to 50 sheets (80 gsm) - (approx. 5 mm thickness, depending on paper) - Maximum booklet thickness: approx. 6 mm (≈120 pages) Stitching System - Number of heads: 2 standard (optional 4 stitching heads – not included) - Stitch types: saddle stitching, side stitching, corner stitching - stitch & fold / fold only - Stitch head type: Hohner 43/6S - Stitch distance (1-up): approx. 60–320 mm Booklet Formats - Finished booklet size (1-up): Itedpfjzblbhjx Abyek - max: approx. 350 × 254 mm - min: approx. 120 × 75 mm - Untrimmed booklet size: - max: approx. 356 × 254 mm Trimming Unit - Duplo DBM-600T - Face trimming (standard): - adjustable trim range - head & foot trimming - 2-up processing capability - trim range: approx. 2–60 mm Folding System - Type: automatic roller folding system - Adjustment: fine tuning from approx. 0.1 mm Control and Automation - Control system: PC-controlled interface - graphical user interface (GUI) - Automation features: fully automatic setup, job memory and recall - quick changeover between jobs Electrical and Physical Data - Power supply: 220–240 V, 50/60 Hz - Power consumption: - DBM-600: approx. 465 W - DBM-600T: approx. 645 W - Dimensions (DBM-600): approx. 1848 × 929 × 1227 mm - Weight (DBM-600): approx. 377 kg

Condition: used, Year of construction: 2024, Working width 3200 mm Roller width 3400 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 290 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 16 to Cloth guiding system for woven fabrics Breithalter, Leitwalze Drive side after order Itodpetv If Asfx Abyjk Operting side after order Drive shaft dia 80 mm required power bei 80 m/min = 11 kW Hydraulic unit for separately pressure in inox • completely new machine, (Photo shows a similar machine after overhauling in delivery-status), • a new drive as single machine or for following operation can be additionally adapted,

Condition: used, Technical specifications: Maximum planing width: 240 mm Maximum planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle configuration: bottom 5.5 kW right/left 7.5 kW top 5.5 kW top 5.5 kW bottom 5.5 kW universal 5.5 kW 1/4/5/6 spindles on separate motors 2/3 on a single motor Ribbed worktables Ribbed rollers in the table: 2 Upper steel feed rollers: 5 Upper rubber feed rollers: 3 Extraction port diameter: 6 x 140 mm Infinitely variable feed rate Feed drive on cardan shafts Lubrication pump for worktable 2 smooth rollers in the table Pressure: 6 atm. Electric elevation of machine body Power supply: 400 V Total power: 32 kW Overall dimensions: Length: 4600 mm Width: 2000 mm Iodpeycu R Iofx Abyetk Height: 1800 mm

Condition: new, Year of construction: 2024, color: red, loading space volume: 20 m³, loading space width: 2,500 mm, loading space length: 6,900 mm, loading space height: 1,250 mm, gearing type: other, total length: 6,900 mm, driver cabin: other, Vehicle location: in transit, Structure: ARCHIVE IMAGES Roll-off container for water in accordance with DIN 14505 - Water transport for at least 10,000 liters - Length: approx. 6.90 m - Width: approx. 2.50 m - Height: approx. 1.25 m - Permissible total weight: 14,000 kg - Roll-off frame must be manufactured in accordance with DIN 14505:2015 - Water tank with baffles - Dome cover 60 x 60 cm square or round (diameter 60 cm) as entry and cleaning opening - Ventilation valve - Equipment compartment in the rear area for storing 2 B 5m filling hoses, folding containers (Husky 3000 Gal.) and water-carrying fittings, size: min. 80cm deep, 200cm wide, 100cm high, closed with a simple closing flap system or roller shutter - Complete emptying must be possible without a pump at the rear, e.g. two emptying nozzles min. DN 100 with shut-off valves and Storz A coupling DN 125 in the middle of the container with a shut-off valve, also accessible at the rear - Two access nozzles DN 75 with Storz B coupling and shut-off valve, free inlet into the tank, pipe routing in the lower area of the roll-off container on the right and left or both at the back, led outwards - Automatic ventilation and final ventilation valve, volume flow min. 3,000l min - Water level indicator - Color: red RAL 3000 - Storage box for 2 A hoses, dimensionally stable 5 m in roof box design - Plastic coating inside - with overflow possible for use on 3-axle vehicles (tank approx. 11,500L capacity) Itedpfx Aovhmqyobyok Delivery time approx. 10 - 12 weeks Available from 5,000-25,000 liters Price depending on the number of liters between EUR 10,000.00 to approx. EUR 20,000.00 per number of liters/volume Available with self-priming water pump, self-lubricating with separate motor, delivery capacity: 129m³/hour 2000l/min, pump height: 17m, grain size: 28mm, fuel diesel, tank: 4.3 ltr., see 2907 for an additional charge of EUR 4,000! Available as a roll-off container and tank ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1670-736, type of input current: three-phase, power: 7.5 kW (10.20 HP), rotational speed (max.): 7,570 rpm, space requirement height: 1,600 mm, space requirement length: 1,200 mm, input voltage: 380 V, space requirement width: 800 mm, input frequency: 50 Hz, Equipment: documentation/manual, For sale: GEA / Westfalia Separator SA 14-47-076 professional centrifuge, built in 1980, serial number 1670-736. This machine was used in a craft brewery for beer clarification. Specifications: 15–45 hl/h • 7,570 rpm • hermetic version • self-cleaning / automatic sludge removal • flow meter • 7.5 kW motor • 380 V / 50 Hz • 32 A connection. History: The machine was completely overhauled in April 2014. It was acquired in 2018 from another brewery. Maintenance work was documented by GEA / Westfalia Separator Belgium in 2021 and 2023, including the replacement of seals, sleeves, oils, greases and other maintenance consumables. Condition: Complete machine, photographed in its current installation. On-site inspection is possible by appointment. Documentation and GEA invoices are available for serious buyers. Iodeztma Uepfx Abystk Asking price: €19,500 (excluding VAT). Transport, disassembly and loading to be agreed upon with the buyer.

Condition: used, functionality: fully functional, WEINIG Profimat 14/6 Four-Sided Planer Iodpfx Abszd Tmvjystk Specifications: • Condition - used, after technical inspection, has defects • Manufacturer - WEINIG • Model - Profimat 14/6 • Working width 140 mm • Working height 120 mm • The machine has 6 spindles with a diameter of 35 mm • Spindle motors - 5 x 3.0 kW (separate for each head) and 1 x 7.5 kW (burnt out) • Total power 24 kW • Electric adjustment of planing height from the control panel and at the end of the machine, at the 6th head • Manual adjustment of planing width • Possibility of adjusting the vertical spindles up/down (as in an up-cutting router) • Infeed gear before the first head • Pressure from spring-loaded feed rollers • Infeed table with a length of 200 cm and a width of 20 cm • Smooth speed adjustment on a variator • Several profile cutters and wrenches included • Overall dimensions 440 x 140 x 155 cm (L x W x H) Additional information: • The machine has one burnt-out motor (the price takes this defect into account), but the remaining spindles and functions of the machine can be checked on-site • The machine shows signs of wear, but its solid construction ensures it will last for many years • The photos show the actual condition of the item for sale • Possibility to switch on and test the machine on-site • Free training on how to operate the machine (at the company's headquarters) • The price stated in the auction does not include VAT and transport costs Financing and transport: • We organize transport with the MDD fleet, courier companies or external carriers • We can provide financial support in the form of leasing or a leasing loan

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Itsdpfszuyxgsx Abyjk Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000023212, functionality: fully functional, power: 13 kW (17.68 HP), input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 12 mm, height adjustment type: electric, feed rate X-axis: 18 m/min, actuation type: electric, total length: 5,900 mm, overall weight: 1,870 kg, Equipment: CE marking, Biesse Akron 1440 A – single-sided automatic edgebander (2018) Itsdpsy U T Azofx Abyek Single-sided automatic edgebander in excellent, near-new condition. Regularly serviced, fully functional and currently in full daily production. Inspection under power / live demonstration possible. Gluing system – dual EVA + PUR: the machine is equipped with both a polyurethane (PUR) glue roller and an EVA glue roller, each with its own glue pot, plus a PUR pre-melter. This allows the full range of edgebanding work, from standard EVA to high-quality, water- and heat-resistant PUR bonding. Feed & pressure: automatic coil edge feeder with separate, automatic feeding; pressure-roller conveyor (steel, rubber and edge-pressing rollers) for a clean, consistent glue line. New touch-screen control panel; rear cleaning brushes replaced; scraper inserts/blades replaced. Working capacity: panel thickness 8–60 mm · edging material height 14–64 mm · edge thickness 0.4–3 mm (coil) / up to 12 mm (strips) · panel length 100–3200 mm · multi-speed feed 8/12/15/18 m/min. Technical data: power 13 kW · 400 V / 50 Hz / 3-phase · weight approx. 1870 kg · air supply 7 bar · year of construction 2018.