Used Crown Cap Supply for sale (12,543)

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 533 mm, Tested forklift battery for your truck - 48V 5PZS 775Ah - DIN B + 1-year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity protocol supplied with delivery) + Year of manufacture: 2024 Dimensions: Length 1,035 mm Width 533 mm Height 784 mm Weight: approx. 1,160 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde A - 5224-00 Linde E 16 - 386-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 10 Linde K 12 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - front battery change Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front battery change Linde R 16 N HD - 1120-00 - front battery change Linde R 20 N - 1120-00 Linde R 20 N - 1120-00 - front battery change Linde R 20 N - 113-00 Linde R 20 N - 113-00 - vertical battery change Linde R 20 SN - 115-08 - vertical battery change Still EK 11 Still FM-X 14 N Still MX 10 Still R 20-16 Still RX 20-18 Still RX 20-18 P Still RX 20-20 Still RX 20-20 PL Jungheinrich ETM 214 Jungheinrich ETM 216 Jungheinrich ETV Jungheinrich ETV C 16 Jungheinrich ETV Q 20 Crown ESR 5220-1.6 Caterpillar NOH10NH Caterpillar NR20NH Common battery sizes available - please enquire. Delivery possible. Bjdpfx Aey Rnn Rjqwjll

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 564 mm, Tested traction battery for your forklift - 80V 3PZS 465 DIN A + 1-year warranty + Includes Aquamatic filling system + Includes end discharge resistor & REMA 320 connector (other connector types can be installed on request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1.5 mm Width: 564 mm Height: 784 mm Weight: approx. 1280 kg Suitable for the following models and others: Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 12 Linde K 15 Linde P 120 - 5007-10 - side battery change Linde P 120 - 5007-10 - vertical battery change Linde P 180 - 5007-10 - side battery change Linde P 180 - 5007-10 - vertical battery change Still MX 13 Still R 60-15 Still R 60-16 Still R 60-18 Still R 60-20 Still RX 60-16 Still RX 60-20 Jungheinrich EKX 513 Toyota 7FBMF16 Toyota 7FBMF18 Toyota 8FBMKT20 Toyota FBM16 Crown TSP 6000-A Crown TSP 7000 Doosan BR13R-5 Mitsubishi FBP16 Yale MTC 13 Bsdpfx Asy Rntaoqwsll Common battery sizes available, please inquire. Transport can be arranged.

Condition: excellent (used), functionality: fully functional, total length: 1,010 mm, total width: 740 mm, total height: 2,070 mm, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: AC, Refrigerator, NordCap BWKS 900 Digital temperature display from -3 to +10°C Energy-saving system EHT Connection: 230V Dimensions: 740 x 1010 x 2070 mm (W x D x H) Used unit Bjdpfx Ajy Ik E Hjqwjll We have many other refrigerators in stock!

Condition: new, Bosch / REXROTH regenerative power supply unit: Type - HMV01.1R - W0065 Bjdpeyu Rz Tefx Aqwoll

Condition: excellent (used), Switch Mode Power Supply Manufacturer: Murr Elektronik Model: Emparro 20-100-240/24 Art. No.: 85442 Input: 100-240 VAC, 50/60 Hz, 5.3-2.3 A 100-230 VDC.... Output: 24 VDC, 20 A, SELV IP20 8 units are available individually, and several more are integrated in control cabinets. Bledpfxsywxz Us Aqwel We have various control cabinets in stock, with different configurations or also empty.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1604/1999, total width: 2,500 mm, total height: 2,660 mm, total length: 21,500 mm, compressed air connection: 6 bar, type of input current: three-phase, overall weight: 3,500 kg, working width: 2,000 mm, working height: 1,000 mm, power: 14 kW (19.03 HP), table width: 1,310 mm, table length: 4,500 mm, Cape CP110 1 and CP110 2 - automatic hydraulic pallet nailing machine designed for top-side and bottom-side nailing. Machine allows for 2-way and 4-way pallet production. Stacker and Outfeed included. No listed price - open to offers. Blodpfxjy S Trwe Aqwsl

Condition: good (used), functionality: fully functional, total length: 1,010 mm, total width: 820 mm, total height: 2,120 mm, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: AC, Alpeninox 900 Storage Freezer Stainless steel construction For trays 600 x 800 mm Digital temperature display from -5 to -18 °C With 15 support rails 230V connection Bsdpfoy Srvbex Aqwell Dimensions: 820 x 1010 x 2120 mm (W x D x H) Used unit

Condition: used, Year of construction: 2002, BE trailer field houses Capacity 6000 kg Bjdpfxjzcu Ruo Aqwjll Bj 2002

Year of construction: 2021, condition: new, Approx. 9 professional espresso machines, LaMacatec, Capri II Black – New: Bljdpfx Aqszbyhcswol Price ex works: only €1,500 (net)! Manufacturer: LaMacatec Type: Capri II Black Art. No.: LM 721 black Year of manufacture: 2021 – but still in original packaging! Groups: 2 Power: 3050 watts, 230V Boiler water: 11.5 liters Dimensions (W x H x D): 66 x 48 x 54 cm Steam: 1 Hot water: 1 Weight: 48 kg Automatic coffee dispensing via volume programming Steel body Low drip tray for “coffee-to-go” Stainless steel steam and water wand, thermosiphon system water circuit Copper boiler (Cu 99.5) with anti-oxidation treatment Former new price in 2021: €3,400, current price: €4,119 Condition: New, in original packaging Available: immediately Location: 88448 Attenweiler

Condition: used, Year of construction: 2024, functionality: fully functional, 3M Encapsulated System Holder 16EZB – Filter holder for production capsules Manufacturer: 3M Purification Inc. / 3M Separation and Purification Sciences Division Model: 3M™ Encapsulated System Holder 16EZB Year of manufacture: 2024 Location: Marburg, Germany Condition: Used, already in operation New price: approx. 78,000 USD Description: For sale is a high-quality 3M™ Encapsulated System Holder, type 16EZB, for use in biopharmaceutical production, pilot plants, or process development. The filter holder was specifically designed to accommodate 3M production capsules and is suitable for both upstream and downstream processes. The vertical process design ensures optimal media utilization. The system allows for quick capsule changes and reduces cleaning and validation efforts compared to conventional stainless steel filter housings. Technical features: Model: 16EZB Accommodates 1 to 7 multi-cell production capsules Robust stainless steel construction Vertical operating position for optimal media utilization Swivel design for easy loading and unloading Mobile system with industrial swivel casters Locking mechanism with two handles Suitable for pilot and production scale Maximum differential pressure load: 3.4 bar (50 psid) Materials: Frame: Stainless steel 304 End plates: Stainless steel 304 Guide rods: Stainless steel 316 Base: Stainless steel 304 Locking elements: Stainless steel 304 Rollers: Polyurethane on stainless steel construction Application areas: Biopharmaceutical production Cell culture harvest Bsdpszbkr Ejfx Aqwjll Monoclonal antibodies (mAb) Recombinant proteins Microbial filtration Downstream process steps Pilot and scale-up applications Advantages: No stainless steel filter housings required Reduced cleaning and validation efforts Quick capsule changes Low risk of contamination Space-saving design High process flexibility Scope of supply: 3M Encapsulated System Holder 16EZB Used, functional Further details and photos on request Inspection: Possible by appointment in Marburg. Price: Negotiable Contact: Further information, technical documents, and inspection appointments on request.

Condition: used, functionality: fully functional, AUGUST SPECIAL OFFER - The machine needs to be moved urgently: SPECIAL PRICE: Only €2,000 (as is)!!! Bledpfx Aqszg Nb Iowsl MAN Roland Practica PRZ 00 2-Color Offset Printing Press Type: Sheet-fed Manufacturer: MAN Roland Model: Practica PRZ 00 Colors: 2 Important Note: Only 14 million copies printed!!! Maximum paper size: 360 x 520 mm Maximum print area: 350 x 500 mm Numbering and perforation Maximum speed: 10,000 sheets/hour Machine length: 2640 mm Condition: Excellent (in stock) Location: Italy Note: (The machine will be sold as spare parts)

Condition: used, Year of construction: 1995, 1995 (CE) Comec MOV8UX+CAP(LV+LO) Mortising machine horizontal and vertical, for short parts, with double magazine for high productivity. 2 vertical groups and 2 horizontal groups for each feeder. Blsdpfx Asykni Hsqwsl

Condition: good (used), EA Elektro-Automatik EA-EL 9080-170 B Laboratory Power Supply EA-EL9080-170B | EA-EL 9080 Bedpfx Ajyplqlsqwell Condition: Used 6.3A 2400W PD 7.00 Financing through our bank is also available. komplett-konzept.leasingo.de Find more laboratory power supplies – new and used – in our shop! International shipping costs on request!

Condition: used, mileage: 94,336 km, power: 110 kW (149.56 HP), first registration: 04/2008, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro5, total width: 1,993 mm, total height: 3,000 mm, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Mercedes Benz Sprinter 315 CDI with Rausch TV inspection system - RCA Proline with Sat Bodpfx Aezit Ukoqwell Installed equipment: * RCA Proline control unit * ELKA 600 cable drum with approx. 250 m camera cable (renewed 2019) * Quattro SAT cable drum with approx. 90 m camera cable and 2 separate push rods approx. 18 m each * Swivel jib with winch for lowering camera/crawler * 1 crawler 1500 with KS200 head for main pipes DN200 to DN1500 * 1 SAT crawler with KS200 head and 2x KS60 SAT cameras * 1 crawler 1100 DN100 - DN250 * Additional halogen lighting, inclination and deformation measurement * Flushing device for cleaning house connections (add-on part) * Computer package with monitors (software for vehicle and office workstations included) * Reversing camera with monitor for driver for positioning vehicle with rear doors open * Water tank * Power supply via generator Chassis: * Mercedes Benz Sprinter 315 CDI, panel van, color: white * First registration: 04/2008, self-propelled working machine, green license plate * Fuel: Diesel * Wheelbase: 3665 mm * Engine output: 150 HP * Reinforced rear and front axles (shock absorbers) * Reinforced stabilizer front axle * High roof and high rear doors * Auxiliary hot-air heater, air conditioning * Amber rotating beacon front left / rear right / front * Rear door double-winged, 270-degree opening angle Special equipment: Rear door (270-degree opening angle), radio pre-installation, spare wheel with road tyres, spare wheel carrier under rear frame including jack, revolving beacons (2), passenger seat comfort, driver’s seat: comfort suspension, stabilizer rear, reinforced front stabilizer, reinforced shock absorbers, aux air heater (electric), partial limitation cargo area sliding door Additional features: Third brake light, driver's airbag, wash water level indicator, electrically adjustable and heated exterior mirrors, both sides, exterior mirrors with integrated indicators, 74 Ah battery, brake assist, driver's cab headliner, lockable glove compartment, body/build: high-roof panel van, child safety locks, fuel tank: main tank 75 liters, continuous partition in load compartment, load securing/tie down rings, headlight range adjustment, engine 2.1 liters - 110 kW CDI CAT, wheelbase 3665 mm, low-emission according to Euro 4 Gr. III emissions standard, sliding door right in load/passenger compartment, steel rims 6.5x16, service interval display Assyst, heat-insulating glass, permitted gross vehicle weight 3.50 t For further details and/or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Specification, prior sale, and errors subject to change. The buyer is responsible for independently inspecting the condition and specification of the equipment. Year of manufacture for the chassis and the inspection system/superstructure may differ. Sale is strictly in line with our terms & conditions and with all warranties excluded.

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Bedpfx Aqjy Aubuswjll Dial gauge position rollers readout safety installations with emergency stop

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 FOR HELICAP 23 PRO: YOM 2019 VERSION 400v 9.000 RUNNING HOURS NEW CONDITION THE MACHINE IS IN PRODUCTION TILL MAY 15TH. Bodeyynd Rjpfx Aqwsll

Year of construction: 2018, condition: like new (used), functionality: fully functional, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Bedpfx Aey Nk Hasqwjll Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018

Condition: new, CAPTRON sensor pushbutton two-hand control for punching and pressing machines / SCB4-185Z-S + SCA4-185Z-S + MCR-225 two-hand safety relay + LKW-SCA-5 cable socket with 5m cable + LKW-SCB-5 cable socket B with 5m cable, unused in opened original packaging, 100% functional, delivery as per photos. Bljdjy Np Iiopfx Aqwol

Condition: good (used), Year of construction: 2006, functionality: fully functional, Used CNC 4-meter press brake from Ermaksan Model: CNC AP 40200 Capacity: 4100 x 200 tons 1 set of complete tooling Delem DA66w graphical CNC control Bledpfx Ajyw Swioqwjl CNC-controlled Y1, Y2, X, and R axes Manual crowning

Condition: good (used), Year of construction: 2025, General information Field of application: Construction Reference number: 1 Weights Empty weight: 1.650 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Blsdpfx Aqsym Agfjwel Other information Fits to following machines: 20-30ton Delivery terms: EXW Required hydraulic flow: 175 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information ASG300H 1650kg Atlas Scap Grapple/ Poliepgrijper with hydraulic rotation, 2x Parker motor, 5 forks, 5 cylinders.

Condition: used, Year of construction: 1997, Automatic in-line filling machine: Model: Bosch FLK 6040 CIP Year : 1997 Power: 5 kW Speed: 30-40 bottles/min Conveyor width: 8 cm Transporting bottles from right to left Linear dosing system with 6 stainless steel pistons Filling point: 6 heads Plunger filling head: yes Volume: from 15 to 500 ml Pistons replaced in 2012. Filling accuracy: +/- 0.5% depending on the product Product: liquid/semi-liquid for bottles, flasks, cans Formats : ⌀ 41 to 115 mm Hauteur max : 320 mm Minimum internal diameter of opening: 5 mm Closed hopper Clean-in-place (CIP) module Maximum temperature: 60°C Dimension : 400 x 150 x 320 cm Weight : 2100 kg Several formats and spare parts available.   Capping/screwing machine: Model : VLM 7010 Year : 1997 Power : 10 kW Transporting bottles by conveyor belt. Direction from right to left. Screw, pressure or push-fit sealing system Capacity : 60 units / min Bottle dimensions: Width: 16 to 90 mm Length: 16 to 135 mm Height: 40 to 280 mm Diameter: 16 to 100 mm Cap dimensions: screw cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Bedpfeyfw H Rjx Aqwell Length: 16 to 60 mm pressure cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length : 16 à 70 mm Machine dimensions: 400 x 130 x 200 cm (+ electrical cabinet 160 x 50 x 170 cm) Weight : 2050 kg  

Condition: used, mileage: 504,265 km, power: 331 kW (450.03 HP), first registration: 07/2021, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, The price does not include VAT and transfer of ownership. Bledpfezfbxpox Aqwol We invite you to verify the characteristics of the published vehicle. Lodotruck s.r.l. disclaims any liability for any unintentional inconsistencies with the description in the ad.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1 x Cimec America Rinser, 8-Head Filler and Capper. This is a compact, automatic monoblock bottling system equipped with 9 x rinsing nozzles, 8 x isobaric (counter-pressure) filling valves, and 1 x capping head. It is highly engineered for rinsing, filling, and crowning still and carbonated beverages. Manufacturer – Cimec S.r.l. Type - AM/DPS 9/8/IC/IVA. Date of manufacture - 2004. Equipment Included: • Rinser, filler and ROPP capper integrated. Crown capper is currently disabled. • All conveyors and drive motors – both ends. • Various change parts including 200ml and 330ml (currently installed). Output speed - Capable of up to 1,800 bph, depending on the bottle volume and product type. Overall dimensions - 3.5 m long x 1.4 m wide x 2.6 m high (approx.). Bedpfx Ajy Um Anoqwoll Last in production in August 2025.

Condition: used, Year of construction: 2018, machine/vehicle number: LC667, Used GEA Aseptic line 48000 BPH - year 2020 (data of use)Technical Specifications & Performance DataThis used bottling line is a 2020 PET aseptic production line configured for 230 ml PET bottled water at a rated output of 48,000 bph. It combines PET bottle blowing, aseptic processing, filling, capping, labeling, inspection and secondary packaging for high-output beverage production.* Production capacity: 48,000 bph* Available bottle format: 230 ml PET only* Main line year: 2018, 2020 (data of use)* Blowing equipment: SIPA SFR24 EVO, 48,000 bph* Filling equipment: GEA FILLSTAR FX AS 84 PET filler, 48,000 bph* Compressor: AF L5S, 35 bar, 220 kWAdvanced Automation & Control SystemsThe line includes electrical control cabinets with HMI displays, ventilated electrical enclosures and high-voltage warning protection. Process equipment includes a Tetra Pak FLEX1 PET UHT sterilizer rated at 17 t/h, a Tetra Pak 15,000 L/h homogenizer rated at 90 kW, a 15,000 L/h yogurt secondary pasteurizer, pulsed-light sterilizers, laser marking machines and visual inspection systems.Product preparation assets include four 25 m³/h centrifugal pumps rated at 7.5 kW, two 30 m³/h centrifugal pumps rated at 18.5 kW, one 12,000 L/h rotary pump rated at 7.5 kW and one 20,000 L/h rotary pump rated at 18.5 kW. The installation also includes a triple 100 mm high-pressure filter, model ECS7003SCA5H19-A61.Production Line Integration CapabilitiesThe PET production line integrates bottle blowing, drying, aseptic filling and capping, cap handling, labeling, coding, inspection, carton packing, sealing and conveying. A GEA conveyor chain system provides bottle transport at 20 to 60 m/min. Five bottle dryer sets with conveyors are included, together with two GEA dryers rated at 700/840 m³/h.Machine type | Manufacturer / model | YearMachine typeManufacturer / modelYearBlow Molding MachineSIPA SFR24 EVO2020 (data of use)Filling MachineGEA FILLSTAR FX AS 84 PET2020 (data of use)Labeling MachineGuangzhou Lixin AP-400H2020 (data of use)Labeling MachineGuangzhou Santuo SL-695 Bodezwu Uuopfx Aqwell

Condition: like new (used), Year of construction: 2018, functionality: fully functional, total width: 4,600 mm, total length: 9,100 mm, total height: 3,000 mm, overall weight: 40,500 kg, Double-production solar panel laminating machine Bsdpfx Aezrdhgjqwsll This laminator is used to produce solar modules or composite materials. Multiple layers of materials are bonded together and fed into the laminator. The materials are laminated under pressure and temperature. The lamination process is carried out under vacuum, preventing the inclusion of undesirable entrapped gases in the final product. Finally, the finished laminate is conveyed out of the laminator. The machine comes with many spare parts and can be viewed in operation.