Used Dako 280-100 for sale (29,945)

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Ljdpfx Amsy Hkd Hjzoru Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,750 mm, table load: 5,000 kg, spindle diameter: 100 mm, spindle speed (max.): 1,120 rpm, table length: 1,500 mm, table width: 1,500 mm, feed length W-axis: 900 mm, workpiece weight (max.): 5,000 kg, The last conventional machine standardly produced by TOS VARNSDORF Solid design Also available in CNC version RET100B and the overhauled machine W100A-R MAIN PARAMETERS Workspindle diameter 100 mm Clamping taper 50 ISO Spindle speed range 1120 rpm Table transversal travel (X) 1600 mm Headstock travel (Y) 1120 mm Table longitudinal travel (Z) 810 / 1250 / 1750 mm Spindle stroke (W) 900 mm Table clamping surface max. 1500 x 1500 mm x mm Table loading capacity max. 3000 kg Lrjdpfx Amjfk I Niozeu

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Ljdozd Sdmjpfx Amzoru Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 3,953 h, load capacity: 1,000 kg, lifting height: 6,750 mm, fuel type: electric, mast type: triplex, construction height: 2,857 mm, fork carriage width: 560 mm, fork length: 1,150 mm, empty load weight: 3,716 kg, total length: 2,000 mm, drive type: Elektro, construction width: 1,250 mm, High-lift order picker Load center: 600 Ledpfez Sif Rjx Amzjru Mast type: Triplex Drive: AC Technical condition: good Front tire type: Solid tires Front tire size: 2 x BA Front tire condition: Not present Rear tire type: Solid tires Rear tire size: 1 x BA Rear tire condition: Not present Battery voltage: 48V Battery capacity: 620Ah Battery year of manufacture: 2016 Battery, charger

Condition: used, Two used Demag injection molding machines are for sale. Attached are the requested photos of our used 280-ton and 650-ton Demag machines, robot, conveyor belt, and enclosure. The machines are still in use in ongoing production and can be inspected while in operation. The costs and organization for dismantling, transporting the machines out of the hall to the truck, loading, and transporting them to your location will be borne by the buyer. The used 650-ton machine, robot, conveyor belt, and enclosure. Lredpfjz Sl Eajx Amzou The used 280-ton machine, robot, conveyor belt, and enclosure.

Condition: used, Espec Type: TSD-100 New evaporator installed in February 2026 100-liter usable volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Lrsdozizl Ropfx Amzsu Automatic defrost Over-temperature protection Operating hour counter Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), mileage: 29,083 km, power: 57 kW (77.50 HP), first registration: 08/2022, fuel type: electric, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,280 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 3, total length: 5,350 mm, total width: 1,850 mm, total height: 1,900 mm, loading space length: 2,600 mm, loading space width: 1,580 mm, loading space height: 1,300 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional options and accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Unladen weight: 2128 kg, Gross vehicle weight: 3055 kg, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assist: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Heated mirrors, Type of lighting: Halogen lamp, Air conditioning, Bluetooth, Engine power: 57 kW (76 hp), Fuel: electric, Type of gearbox: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, L3H1 75 kWh Long Range Snelladen Airco PDC Rear doors Automatic 136 hp!, Tire type: All-season tires = Additional information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 215/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 2,128 kg Payload: 927 kg GVW: 3,055 kg Functional Loading platform height: 60 cm Maintenance APK (Technical inspection): valid until 11.2026 Condition Lodpfsz Nd E Esx Amzoru Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €383 per month (van, 72 months); Please inquire for further information and conditions.

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Lrjdpfx Amsz Srm Nszou Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, ABB SDS 100 Servo Drives Eprom 53.4kVA SDS105-077A0-670V01-0070 SDS105-077A0-670V01-0070 3ADT211038R1200 SN 53.4kVA Refurbished by the manufacturer Eprom Input 670V DC Output 0-400V AC Very large selection of ABB servo drives. All of our units have been refurbished. See pictures. Units are shipped regardless of the refurbishment date. Please note that the colors on your screen may differ slightly from the original colors. Lrjdpfx Aod Iu Uwjmzju H1R1b23 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0085, pressure: 6 bar, power: 895 kW (1,216.86 HP), temperature: 120 °C, Viessmann Vitoplex 100, 895 kW. Lrsdpfx Amoz Uikkezeu

Condition: new, ATiB HTUB 80/100-L HF Charger The HTUB is a top-of-the-line HF charger designed for maximum performance. This range encompasses all the key features of HF chargers in terms of efficiency, power factor, ventilation, internal structure (dedicated 3 compartments), and overall flexibility. An integrated digital interface with an OLED display and built-in USB enables the best and easiest monitoring/adjustment of charging parameters, diagnostics, and data reports. Key Features AC input voltage: 480Vac (3-phase) 50-60Hz / 600Vac (3-phase) 50-60Hz Display: OLED/LCD display, 4 LEDs, and 4 control buttons Adjustment type: Via OLED display: current, capacity, and 7 pre-set charging profiles Via PC/laptop/USB connection: advanced programming Data storage: Report on the last 50 charging cycles and important technical data (integrated USB connection) Cooling system: Dedicated air cooling directly to the heatsink. Temperature-controlled fan speed. Standby mode within +104°F (+40° C) internal component temperature Efficiency: ≥ 92% Operating temperature: +32° to +104°F (0° to +40° C) Certification: CSA Safety Features Input protection: 3x fast-blow AC fuses Output protection: Ultra-fast fuse (reverse polarity protection) Thermal protection: Sensors on IGBTs, diodes, and power transformer (maximum temperature adjustable) with derating Lrodpfx Amjxuqrwezou Protection during battery disconnection: Undervoltage safety shutdown (direct battery disconnection) Mechanical Properties Dimensions (L x W x H): 456 x 195 x 570 mm Degree of protection: IP 21 (vertical) – Dedicated air cooling directly to the heatsink. Weight: 28 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1967, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 80 t Stroke rate: 125 strokes/min Total power requirement: 9.5 kW Machine weight: approx. 4.4 t Stroke and ram data Stroke: 20–120 mm Ram dimensions: 560 × 355 mm Ram adjustment: 72 mm Working area Overhang: 280 mm Table Table width: 710 mm Table depth: 560 mm EQUIPMENT UVV – accident prevention regulation Lodpfx Ao Aa Ntnomzjru

Condition: excellent (used), CATALOGUE NUMBER 7751 TECHNICAL DATA - track width 250mm - working width of the roller 250mm - max. disc diameter 300mm - disc bore diameter 60mm - max. cutting height 100mm - table width with extension 520mm - table length 1580mm *from above: - pawls, 2 rows - sliding roller, metal, pressure roller - roller with saw blades - smooth sliding roller, metal, sliding roller *from below: - sliding roller - guide strip - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor 0.75kW - main motor 15kW - diameter of dust extraction nozzle 200mm - overall dimensions L/W/H 1640x1400x1550mm - weight 1000kg ADVANTAGES – Italian made Lrsdjzr Izkspfx Amzju – very good condition – used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: new, Piston rod guide, Ø 100/60 Alø: 100 mm Packaging quantity: 1 F: 12 mm Thread G: M105x2 Packaging unit: piece Dø: 114 mm Lodo Abhpkopfx Amzeru Sø: 60 mm A: 70 mm

Condition: used, mileage: 562,221 km, power: 206 kW (280.08 HP), first registration: 06/2015, fuel type: diesel, tire size: 305/70r22,5, axle configuration: 4x2, wheelbase: 6,800 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 8,720 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Equipment: air conditioning, electric window regulation, spoiler, tail-lift, Front axle: Tyre size: 305/70r22,5; Suspension: leaf suspension Rear axle: Tyre size: 315/70r22,5; Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 6 Empty weight: 9.250 kg Carrying capacity: 9.750 kg GVW: 19.000 kg Make of engine: Renault Lsdsz R Sktspfx Amzeru Tail lift: D HOLLANDIA, slider lift = Additional options and accessories = - Roof spoiler

Condition: used, Year of construction: 1997, operating hours: 13,410 h, load capacity: 1,600 kg, lifting height: 4,310 mm, free lift: 1,405 mm, fuel type: electric, mast type: triplex, battery capacity: 1,000 Ah, battery voltage: 24 V, fork carriage width: 1,000 mm, fork length: 1,100 mm, overall weight: 3,000 kg, total height: 2,000 mm, total length: 3,000 mm, total width: 1,050 mm, No. 04537 Electric front forklift Steinbock Boss LE 16-100 MK V A-1 Used, year of manufacture 1997 Approx. 13,410 operating hours Rated load capacity 1600 kg at a 500 mm load center distance Lrodpfx Asz S U S Usmzeu Triplex lift mast Lifting height 4310 mm Free lift 1405 mm Hydraulic mast tilt Fork length 1100 mm Fork carriage width approx. 1000 mm Fork adjustment manually adjustable Superelastic tires (SE) Power steering Electric drive, infinitely adjustable Direction switch on the steering column Driver protection roof Driver's seat with seat belt Rearview mirror Headlights Emergency stop switch Battery data according to nameplate: 24 V / 1000 Ah Including automatic charger miditron B, 24 V / 200 A Vehicle length without forks approx. 1800 mm Transport dimensions approx. 3000 x 1050 x 2000 mm LWH Weight approx. 3000 kg To avoid any possible misunderstandings, an on-site inspection is possible and recommended after prior appointment Sale is made in the current condition Technical data, condition description, year of manufacture and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the condition "sold as seen" applies Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex warehouse

Condition: used, Manufacturer: Gendron Ledpownhkmjfx Amzeru Type: RU 28-100 Max. grinding length: 1000mm Max. grinding diameter: 280mm Center-height: 155mm Table: 1660x150mm Grinding wheel: 300mm Machine-dimensions: 2700x1550x1500mm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, TREIF Felix 100 CE – Professional Dicer / Universal Slicer The TREIF Felix 100 CE is a compact and high-performance cutting machine designed for professional food processing. This machine is ideal for dicing, strip cutting, and portioning meat, bacon, sausage, cheese, fish, and vegetables. Thanks to its semi-automatic feed system with frequency drive, the machine operates precisely, quickly, and reliably. The spacious cutting chamber allows for processing a wide range of products without the need for extensive pre-cutting. The robust stainless steel housing ensures high levels of hygiene and easy cleaning. Technical specifications: Model: TREIF Felix 100 CE Lredpfsy R Aqyex Amzeu Cutting chamber: 96 × 96 mm Cutting length: approx. 0.5 – 32 mm Output: up to 0.8 t/h or approx. 500 kg/h Voltage: 220 V / 3 phase Material: Stainless steel Applications: Meat, poultry, fish, cheese, vegetables, and more Condition: used / good condition (adjust as needed) Advantages: Precise dicing and strip cutting High production capacity Easy operation Hygienic stainless steel design Compact construction Ideal for butcheries, commercial kitchens, and food processing companies The TREIF Felix 100 CE stands out for its reliability, durable construction, and professional cutting results.

Condition: new, 309 143; 309143 Lrsdpfx Aj Abmdyemzou L1: 100 mm Packaging unit: piece Packaging quantity: 1

Condition: new, 309 341; 309341 Lrjdpfxs Abmfqj Amzeu L1: 100 mm Packaging unit: piece Packaging quantity: 1

Condition: new, Energy-saving thanks to the use of IE2 motors Low wear due to very low compressor speed Low-noise operation and high running smoothness In the lower range of pressure vessel sizes, up to 200 liters, they are available in either mobile or stationary versions. For mobile versions in the pressure vessel range of 50 - 200 liters: • Check valve • Relief valve • Manometer • Safety valve • Condor pressure switch • Quick-release coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug For stationary compressors in the pressure vessel range of 50 - 500 liters: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Manometer • Vibration damper Up to 4 kW motor power: • 3 m connection cable with plug • Relief valve Lode Abn Sxopfx Amzsru From 5.5 kW motor power: • Automatic star-delta starter for wall mounting • Solenoid valve with silencer Suction capacity l/min 380 Delivery rate l/min (at 7 bar) 280 Motor power kW 2.2 Rated voltage V/Hz 400/50 Compressor speed min 855 Max. pressure bar (g) 15 Tank capacity l 100 Stages 2 Weight kg 92 Dimensions l/w/h in mm 1,080/510/1,120 Delivery rate l/min (at 7 bar): 280 Tank capacity l: 100 Dimensions l/w/h in mm: 1,080/510/1,120 Weight kg: 92 Motor power kW: 2.2 Rated voltage V/Hz: 400/50 Stages: 2 Suction capacity l/min: 380 Max. pressure bar (g): 15 Compressor speed min: 855

Condition: used, IPG Type Model: YLP-HP-2-1500-50-100 IPG Ytterbium Fiber Laser 90-240 VAC Condition: used Lrsdezd Rmaspfx Amzeu Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). Lrodpszhlr Eofx Amzsu The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has only been operated with argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser on-time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was in early 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during a running job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See image) SLM 280 machine Control cabinet Process chamber Internal control panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone. Lrodozimaaspfx Amzou

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 AC servo controller, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Lrodpfx Amsi Ebhhszsu