Used Dgs Ssf650P50 for sale (185)

Condition: ready for operation (used), Year of construction: 2011, A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible. Kjdpfx Ahoxd Au Ajienc

Condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw assembly with digital length display Cutting area at 90°: 195 x 120 mm Kedpfx Ahozi A Uaeisnc Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung

Condition: excellent (used), pressure: 13 bar, operating pressure: 13 bar, For sale: a Jumag steam generator with a gas burner. An oil burner can be included upon request. The unit is in very good condition. Type DG 160. Steam output: 160 kg/h. Kodpsydq E Dsfx Ahijnc Maximum steam pressure: 13 bar. Delivery available for an additional charge. On-site inspection possible. Please contact us if you have any questions.

Condition: excellent (used), Year of construction: 2022, overall weight: 790 kg, chuck outer diameter: 1,000 mm, bolt circle diameter: 145 mm, total height: 140 mm, total width: 1,000 mm, total length: 1,000 mm, Metal cutting Tooling TDG Solutions - PGI 1000 MACH-ID 9418 Make: TDG Solutions Type: PGI 1000 Year: 2022 Diameter: 1000mm 4 chuck: Yes Spindle bore:145mm Max. speed: 611Rpm Length: 1000mm Width: 1000mm Knedpfx Ahszcnm Asisc Height: 140mm Weight: 790kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, DEMAG Spare Parts: 1. Transmitter / Circuit Board DRC - DR D3 2. Load Measuring Pin DMR 20 3. CAN Safety Transceiver 4. Brake Ring / Conical KB 160 B - 2 pieces 5. Brake Ring / Conical KB 100 B - 2 pieces 6. Clutch Set 7. Brake Disc 13KF - 3 pieces Knjdpfx Ahewug Nusioc 8. Swivel Eye DK 20 - 2 pieces 9. Torque Support Set MA 125-1 - 2 pieces 10. Magnet Body for Brake B140 - 1 piece + B050 - 2 pieces 11. Wire Rope Diameter 16 mm - 35 meters 12. Wire Rope Diameter 10 mm - 62.8 meters 13. Gear Limit Switch DGS 3

Condition: reconditioned (used), Year of construction: 2008, operating hours: 45,172 h, laser type: CO₂ laser, laser power: 2,500 W, Equipment: cooling unit, DG Tech – Authorized BLM Group Inspection Center DG Tech was established as a spin-off of DGService to specifically cater to the market for used BLM Group machines. Leveraging our experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. We manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high quality standards. We handle logistics, disassembly, and transportation directly, eliminating the risks associated with private sales. Kodpfxexqdg Tj Ahionc In partnership with BLM Group, we provide dedicated software, technical training, and post-sales support. We also offer flexible operational leasing solutions to optimize investment and productivity. LT722D Round tube: min 12 mm, max 140 mm – Square/rectangular tube: max 120×120 mm – Bar weight: max 15 Kg/m – Rear beam loader: 6500 mm – Unloader: 4500 mm

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, 1 used steam boiler ----- - with corrugated flame tube and dished ends - Manufacturer: STANDARD Heating surface approx.: 240 sqm Capacity: 13.4 t/h Knsdpfx Aoxtndnjhijc Previous operating overpressure: 14.0 bar Test overpressure: 18.2 bar Water content approx.: 18,160 l Year of manufacture: 1988 Equipped with Saacke natural gas burner type DG 80, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: new, 0 4000,5000 mm Working height 120 mm Knjdpfx Ahexmk Amjioc 0 ja

Condition: new, Bernardo Dual-Column Bandsaw MBS 400 DG / 400 V Technical Specifications Cutting capacity, round / square 90°: 315 mm / 270 x 270 mm Cutting capacity, flat 90°: 400 x 250 mm Cutting capacity, round / square 45° (right): 280 mm / 280 x 280 mm Cutting capacity, flat 45° (right): 300 x 280 mm Cutting capacity, round / square 45° (left): 250 mm / 220 x 220 mm Cutting capacity, flat 45° (left): 280 x 200 mm Cutting capacity, round / square 60° (right): 180 mm / 140 x 140 mm Working height: 870 mm Saw band dimensions: 3460 x 34 x 1.1 mm Cutting speeds: 35/70 m/min Coolant pump: 100 W Motor output (S1 100%): 2.2 kW Motor input (S6 40%): 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2150 x 1400 x 1420 mm Weight: approx. 550 kg Scope of delivery • Saw band Knedpfjzibbxox Ahioc • Workpiece stop • Base frame • Pressure gauge for band tension • Saw band guide with carbide inserts • Quick-release vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end stop

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Kodpfxeywxraj Ahijnc Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: new, Bernardo Double-Column Bandsaw MBS 600 DG / 400 V Technical Specifications Cutting capacity, round / square, 90°: 410 mm / 300 x 300 mm Cutting capacity, flat, 90°: 540 x 300 mm Cutting capacity, round / square, 45° (right): 400 mm / 260 x 260 mm Cutting capacity, flat, 45° (right): 400 x 210 mm Cutting capacity, round / square, 45° (left): 340 mm / 260 x 260 mm Cutting capacity, flat, 45° (left): 380 x 170 mm Cutting capacity, round / square, 60° (right): 260 mm / 175 x 175 mm Working height: 866 mm Bandsaw blade dimensions: 4290 x 34 x 1.1 mm Cutting speeds: 45 / 90 m/min Coolant pump: 100 W Motor output power S1 100%: 2.2 kW Motor input power S6 40%: 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2340 x 1430 x 1460 mm Weight: approx. 606 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for blade tension • Bandsaw blade guide with carbide inserts Kedpfx Ahszibc Aeienc • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer The unit is in full working condition and is ready for immediate release The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains. Key Features: Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film. Dynamic Range: Wide dynamic range for accurate quantitation. Imaging Technology: Three-color red, green, and blue CCD imaging. Calibration: Self-calibrating for consistent performance. Compliance: 21 CFR Part 11 compliance for regulatory environments. Included Components Scanner and Cables: Comes with the necessary scanner and cables for operation. Optional Software: Knsdpfexv D Dcjx Ahisc Image Lab™ Software: PC-compatible software for image analysis. 21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11. Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs. Specifications: Scan Area: 29 x 33 cm (transmissive and reflective) Wavelength: 400 – 750 nm Bit Depth: 16-bit grayscale

Condition: good (used), Year of construction: 2001, Separator TEBA 240 DG Knodpfx Aheu Ekw Nsioc Round 240 mm Rectangular 230 x 230 mm Motor 1,5kW Dimensions: 1,950 x 1,650 x 1,000 mm Mitre saws 90° / -45° / +45°/ +60° Cutting speed: 40/80 m/min.

Condition: new, cutting diameter 315 mm capacity 90 degrees: flat 400 x 250 mm capacity 90 degrees: square 270 x 270 mm capacity 45 degrees: flat RE 300 x 280 mm capacity 45 degrees: round RE 280 mm capacity 45 degrees: square RE 280 x 280 mm capacity 45 degrees: flat LI 280 x 200 mm capacity 45 degrees: round LI 250 mm capacity 45 degrees: square LI 220 x 220 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 140 x 140 mm turning speed range: 35 + 70 m/min Knodpfoz D It Uox Ahioc saw band length 3460 x 34 x 1.1 mm work height max. 870 mm voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 550 kg range L-W-H 2150 x 1400 x 1420 mm The MBS 400 DG model is a precision horizontal band saw designed for universal use. Key features of this machine include a swiveling saw frame for double miter cuts from -45° to 60°, as well as a hydraulic cylinder for precise lowering via a control valve. Features: - Professional band saws for general workshop use - for cutting hollow profiles and solid materials, stainless steel, ... - torsion-resistant, heavily dimensioned saw frame made of ductile iron - adjustable hydraulic cylinder for regulating the contact - pressure of the saw frame - Swiveling saw arm for double miter cuts * to the left (-45°) and right (60°) - Smooth, low-vibration operation thanks to the use of high-quality materials - Sturdy vise made of gray cast iron with quick-release lock - Band saw guide with quick adjustment * to accommodate the workpiece width, ensuring optimal results - Automatic shut-off upon completion of the cut Scope of Delivery - Band saw blade - Workpiece stop - Base frame - Pressure gauge for band tension - Band saw guide with carbide inserts - Quick-release vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic end-of-cut shut-off

Condition: new, cutting diameter 410 mm capacity 90 degrees: flat 540 x 300 mm capacity 90 degrees: square 300 x 300 mm capacity 45 degrees: flat RE 400 x 210 mm capacity 45 degrees: round RE 400 mm capacity 45 degrees: square RE 260 x 260 mm capacity 45 degrees: flat LI 380 x 170 mm capacity 45 degrees: round LI 340 mm capacity 45 degrees: square LI 260 x 260 mm capacity 60 degrees: round 260 mm capacity 60 degrees: square 175 x 175 mm turning speed range: 45 + 90 m/min saw band length 4290 x 34 x 1.1 mm work height max. 866 mm voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 606 kg range L-W-H 2340 x 1430 x 1460 mm The MBS 600 DG is a precision horizontal band saw designed for universal use. Key features of this machine include a swiveling saw frame for double miter cuts from -45° to 60°, as well as a hydraulic cylinder for precise lowering via a control valve. Features: - Band saw guide via a combined roller-and-jaw guide system * with carbide inserts - Swiveling saw frame for double miter cuts * to the left (-45°) and right (60°) - 2 band saw speeds (45 / 90 m/min) for optimal cutting results - Robust construction, ensuring smooth and vibration-free operation - Professional band saw offering excellent value for the price - Optimal power transmission to the drive wheel via a hardened . and ground worm shaft and bronze worm gear - Adjustable hydraulic cylinder for regulating the clamping . pressure of the saw arm - Sturdy gray cast iron vise with workpiece stop * Ideal for batch cutting Knsdpfx Ajz D Iufshioc - For cutting profiles, tubes, and solid materials made of iron . and non-ferrous materials Scope of Delivery - Saw blade - Workpiece stop - Base frame - Pressure gauge for band tension - Band guide with carbide inserts - Quick-release vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic end-of-stroke shut-off

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice Kedoupxupopfx Ahijnc • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Ksdpjvtqacofx Ahionc Maximum stacking height : 500 mm Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t Knedpfofgyicjx Ahijc dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, machine/vehicle number: 26653, Year of construction: 2026, operating hours: 1 h, load capacity: 1,200 kg, lifting height: 2,410 mm, fuel type: electric, mast type: simplex, construction height: 1,788 mm, .: 26653 Device Details: Year of manufacture: 2026 Load capacity: 1200 kg Lifting height: 2410 mm Recorded operating hours: 1 h Mast type: Standard Mast height: 1788 mm Length/Width/Height: 1735 / 820 / 1255 mm Operating weight: 653 kg ---- Equipment: * DGS made of plexiglass ---- Additional device information: ---- The operating hours indicated are generally recorded hours. We would be happy to offer you suitable transport. Knsdpfozik Hdsx Ahiec We have another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We would also be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Subject to prior sale and errors in this offer. In dealer sales, the device is sold in its AS IS condition, without refurbishment. All information is without guarantee, errors and changes excepted.

Condition: refurbished (used), Year of construction: 2016, operating hours: 18,000 h, DG Tech – Authorized BLM Group Inspection Center DG Tech was created as a spin-off of DGService to specifically address the market for used BLM Group machines. Thanks to our experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. Knodpfxozhw Eqe Ahisc We handle the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high quality standards. We directly manage logistics, disassembly, and transportation, eliminating the risks associated with private sales. In partnership with BLM Group, we provide dedicated software, technical training, and post-sales support. We also offer flexible operating lease solutions to optimize investment and productivity. LC5 laser cutting machine, combined tube and sheet metal processing Materials processed: mild steel, stainless steel, aluminum alloys, copper, brass. Round tube: min 12 mm, max 120 mm – Square tube: min 12x12, max 100x100 mm – Rectangular tube: min 10x12, max 120x70 mm Maximum bar weight: 13.5 kg/m Sheet metal processing limits: 3000×1500 mm Configuration: Automatic Tube Loading System (Rear) 6500 – Unloading 4500 max

Condition: used, This listing is for a Grifols DG-224 Blood Typing Solution. The unit is in full working condition and is ready for intimidate release. The Grifols DG-224 is a sophisticated diagnostic instrument designed for use in clinical laboratories, particularly in blood typing and antibody investigations. It is an integral part of the DG Gel system, which employs column agglutination technology (CAT) to deliver precise and reliable testing results. Below are detailed insights into the features and specifications of the DG-224. Key Features: Manual Testing System: The DG-224 delivers efficient testing procedures, making it suitable for both patient and donor testing while maintaining a comprehensive assay menu. Kedpfx Asxxz N Ushionc Compatibility with DG Gel Cards: This instrument works exclusively with DG Gel cards, which utilize 8-column gel technology to facilitate accurate blood group typing and detection of unexpected antibodies. Load Capacity: The DG-224 is designed to accommodate up to 24 DG Gel cards, allowing for high-throughput testing in busy laboratory environments. Removable and Interchangeable DG Spin Head: The device features a unique spin head that can be easily removed and replaced, ensuring ease of maintenance and versatility. Pre-Programmed Centrifugation Conditions: The DG-224 includes pre-set centrifugation parameters specifically optimized for use with DG Gel cards. Centrifugation Speed: The instrument operates at a centrifugation speed of 990 rpm ±10 rpm, ensuring effective separation and analysis. Digital Display and Alarm System: The DG-224 is equipped with a digital display for easy monitoring of the testing process. It also features an alarm system to signal any operational issues. Safety Features: Built-in safety systems include out-of-balance control to prevent misuse in case of improper loading and detection mechanisms for door opening during operation, enhancing user safety. Technical Specifications: Voltage: 100-240V, allowing for use in a variety of international settings. Frequency: 50-60 Hz, compatible with global power specifications. Maximum Input Power Consumption: 50 W, indicating low energy consumption. Fuses: Requires 2 x T 2A L 250 V fuses.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2015, operating hours: 19,915 h, laser power: 5,000 W, warranty duration: 6 months, Equipment: cooling unit, DG Tech – Authorized BLM Group Inspection Center DG Tech was created as a spin-off of DGService to specifically address the market for used BLM Group machinery. Leveraging our extensive experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. We manage the evaluation, purchase, and refurbishment of machinery, including laser source maintenance, ensuring high-quality standards. We handle logistics, disassembly, and transportation directly, eliminating the risks associated with private sales. In partnership with BLM Group, we provide dedicated software, technical training, and post-sales support. We also offer flexible operational leasing solutions to optimize investment and productivity. Kodpfsw Dcd Hjx Ahisnc 4000x2000 LONGITUDINAL PALLETS - IPG 5000W

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder Knsdpfxsv Rahdj Ahiec -Manufacturer: Festo, standard cylinder type DGS-25- -Stroke: 70 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 -Hole diameter: 13 mm -Max. pressure: 12 bar -Dimensions: Ø 33 x 208 mm -Weight: 0.6 kg

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV permanent magnet motor, serial number: MAC093-32704 + Stegmann DG 1604 2500 pulses/rev rotary encoder, serial number: 330003657, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Knodpfx Aoi D In Tehiec

Condition: new, Bernardo DG 32 Pro Drill Grinding Machine Specifications Drill diameter: 2 – 32 mm Point angle: 90° - 135° Speed: 4800 rpm Motor power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Kodpogd H U Uefx Ahisnc Scope of delivery • SBC diamond grinding wheel • ER 20 collets, 3 – 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • ER 40 collets, 13 – 32 mm, 20 pcs. (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) • ER 20 or ER 40 collet chuck Features • Includes a setup for point grinding, i.e., improved centering of the drill tip on the workpiece and reduction of the required feed force • 30 ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes • Additional station for back-grinding the drill cutting edges (relief angle) • Universally adjustable point angle from 90° - 135° • Rotor with precision ball bearings ensures smooth running • Fast and precise working results due to simple operation • Vibration-free operation due to high inherent weight and rubber feet