Used Differential-Way Press for sale (20,801)

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ Lsdpfx Acozvz Tbjfoaf - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: used, empty load weight: 4,110 kg, maximum load weight: 10,290 kg, overall weight: 14,400 kg, first registration: 07/2023, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 900 mm, suspension: steel, tire size: 385/55 R 19,5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: en route / in transit, 2 axles, SAF axles, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, rear supports, swing-out tailgates, adjustable drawbar, removable sideboards Laodpfx Acezvzgbjfjf Body: with sideboard extension, steel sideboards that can be folded down and are spring-supported, like new condition, drum brakes, ramp compartment, R-wheel available at an additional cost of €300 and for ramps €1,000.00, loading height 1.08 m, frame galvanized, data subject to change as the vehicle is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 10/2002, loading space length: 5,040 mm, loading space width: 2,420 mm, loading space height: 500 mm, suspension: steel, tire size: 235 / 75 R 17,5, wheelbase: 990 mm, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: en route / in transit, steel frame, ABS (anti-lock braking system), 2 axles, tandem axle, leaf spring suspension, front support legs. Lodpozvzgujfx Acfoaf Wheelbase: 990 mm. Frame: ARCHIVE PHOTO! Drawbar height-adjustable. All information is provided without guarantee, as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: new, Year of construction: 2026, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. Ledpfsgvkmrox Acfsaf • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: used, Year of construction: 1987, machine/vehicle number: 17080987, input voltage: 380 V, table length: 2,500 mm, total width: 1,300 mm, year of last overhaul: 2024, Equipment: documentation/manual, We are offering this used Italpresse BN-25-F veneer press, manufactured in 1987. It has been inspected and overhauled in 2024 and is SKH certified. It features two-hand operation and an emergency stop. Lsdozu A Azspfx Acfeaf If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 08/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,000 mm, loading space width: 2,200 mm, loading space height: 1,370 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Are you looking for a different model, engine specification, dimensions, or additional options? Feel free to contact us. We offer financing and leasing on attractive terms – also available in the Netherlands, Austria, and for new business start-ups! --- VEHICLE * Wheelbase: 3450 mm * Manual transmission * Single cab * Twin rear tires * Gross weight: 7.2 tonnes SEATING * Passenger seatbelt pretensioner * Fabric seat covers Ljdpfxex S S Rlo Acfjaf ELECTRICAL/LIGHTING ConnectivityBox 4G * Daytime running lights * Accident data recorder * Digital EU tachograph 4.1 * Battery 12 V 105 Ah (AGM) * Light and rain sensor * Manual high beam control * Additional speed limiter * Switch for body lighting * 12V 13-pin trailer socket EXTERIOR CAB Mirrors for body width 2350 mm * Wide wheel arch trims * Blind spot radar behind cab * Fuel filler neck in B-pillar * Turn assistant passenger side (BSIS) * Tire Pressure Monitoring System (TPMS) * Front field monitoring (MOIS) * Proactive steering assistant with lane monitoring (ELK) * Emergency brake assistant AEBS with City Brake * Electrically adjustable and heated exterior mirrors * Mud flaps on front axle * Additional vehicle key with remote control INTERIOR CAB / AUDIO Extended driver attention warning system (Advanced Driver Distraction Warning) * Central locking with remote control * Grab handle on A-pillar * Rear wall insulation * Traffic sign recognition with Intelligent Speed Assistant (ISA) * Electric windows for front doors * Left-hand drive for right-hand traffic * Front airbags for driver and passenger with seatbelt pretensioners * Preparation for alcohol interlock (alcolock) * Speed limiter 90 km/h * Overhead storage above windshield * Smoker package, ashtray, and cigarette lighter * 12V socket for windshield OBU CHASSIS Spare wheel carrier at rear end of frame * 20-liter AdBlue tank under cab * Weight variant 2500/5350 kg * Spare wheel, matching vehicle tire size * Rear underrun protection * ESP system * Integrated 90L fuel tank * Centrally mounted manual parking brake * Tires 225/75 R16 * Reinforced front axle * Tow bar with ball head ENGINE / TRANSMISSION / AXLES Preparation for PTO * Rear axle ratio i 4.23 * Standard oil pan * Aluminum radiator * Emissions standard EURO VI E * Heated crankcase breather * Settings for special fuels (HVO/GTL) * Heated fuel filter * Comfort noise insulation * Manual gearbox FT 50.6 * Alternator 3500 watt (14 volt x 250 ampere) * Documentation in German * 4x2 MY24 * Tires 225/75 R16 all-season * Electronic operating and maintenance manual – available via app (Iveco Easy Guide) COMFORT PLUS USB socket on driver and passenger side * My Iveco Infotainment 10-inch with navigation * Integrated Alexa voice assistant * Passenger bench with multifunction storage and compartment * Fog lights * Air conditioning with automatic climate control, pollen filter and outside temperature display * Adaptive cruise control (ACC) * 170ccm air conditioning compressor * Comfort headrests WINTER * Auxiliary hot water heater * Luxury driver’s seat with armrest and lumbar support, adjustable in height, tilt, and length, hydraulically suspended, heated * Heated windshield CONSTRUCTION Electronic differential lock (EDS)

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 08/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,000 mm, loading space width: 2,200 mm, loading space height: 1,370 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Are you looking for a different model, engine variant, dimensions, or other specifications? Feel free to contact us. We offer financing and leasing at attractive terms – also available for the Netherlands, Austria, and startups! ----VEHICLE * Wheelbase: 3450 mm * Manual transmission * Single cab * Dual rear wheels * Gross weight: 7.2 tonnes SEATING * Belt tensioner on passenger side * Fabric seat covers ELECTRICAL/LIGHTING & CONNECTIVITY * 4G ConnectivityBox * Daytime running lights * Accident data recorder * Digital tachograph (EU standard) 4.1 * 12V 105 Ah (AGM) battery * Light and rain sensor * Manual high beam control * Additional speed limiter * Switch for body lighting * 12V 13-pin trailer socket CAB EXTERIOR * Mirrors for body width 2350 mm * Wide wheel arch covers * Blind spot radar behind cab * Fuel filler neck in B-pillar * Turn assist system passenger side (BSIS) * Tire pressure monitoring system (TPMS) * Front field monitoring (MOIS) * Proactive steering assistant with lane monitoring (ELK) * Emergency braking assistant AEBS with city brake * Electrically adjustable and heated exterior mirrors * Mud flaps front axle * Additional vehicle key with remote control CAB INTERIOR/AUDIO * Advanced Driver Distraction Warning system * Central locking with remote control * Grab handle on A-pillar Lsdpox S S Rxefx Acfjaf * Rear wall insulation * Traffic sign recognition with Intelligent Speed Assist (ISA) * Electric window lifters for front doors * Left-hand drive for right-hand traffic * Front airbags for driver and passenger with belt tensioners * Preparation for alcohol interlock device * Speed limiter 90 km/h * Roof shelf above windscreen * Smoker package, ashtray and cigarette lighter * 12V socket for windscreen OBU CHASSIS * Spare wheel holder at frame end * 20-litre AdBlue tank under cab * Weight configuration 2500/5350 kg * Spare wheel same dimension as vehicle tires * Rear underrun protection * ESP system * 90L integrated fuel tank * Manual parking brake in center * 225/75 R16 tires * Reinforced front axle * Ball-type trailer hitch ENGINE/TRANSMISSION/AXLES * PTO preparation * Rear axle ratio i 4.23 * Standard oil sump * Aluminum radiator * Emission standard EURO VI E * Heated crankcase ventilation * Settings for special fuels (HVO/GTL) * Heated fuel filter * Comfort sound insulation * Manual gearbox FT 50.6 * Alternator 3500 Watt (14 Volt x 250 Ampere) * Documentation in German * 4x2 MY24 * 225/75 R 16 all-season tires * Operating and maintenance manual available electronically – user manual accessible via app (Iveco Easy Guide) COMFORT PLUS * USB port driver and passenger side * My Iveco 10-inch infotainment with navigation * Integrated Alexa voice assistant * Passenger bench with multifunction tray and storage compartment * Fog lights * Air conditioning with automatic climate control, pollen filter, and outside temperature display * Adaptive cruise control (ACC) * 170 cc air conditioning compressor * Comfort headrests WINTER * Additional hot-water heater * Luxury driver's seat with armrest and lumbar support, adjustable for height, tilt, and longitudinal position, hydraulically suspended and heated * Heated windscreen CONSTRUCTION * Electronic differential lock (EDS)

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 08/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,000 mm, loading space width: 2,200 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Are you looking for a different model, engine variant, dimensions, or other options? Feel free to contact us. We offer financing and leasing at attractive terms—including for the Netherlands, Austria, and new business startups! ---VEHICLE--- * Wheelbase: 3,450mm * Manual transmission * Single cab * Dual rear wheels * Gross weight: 7.2 tons SEATING * Seatbelt tensioner on passenger side * Fabric seat covers ELECTRICS / LIGHTING / CONNECTIVITY * ConnectivityBox 4G * Daytime running light control * Accident data recorder * Digital EU tachograph 4.1 * 12V 105Ah AGM battery * Light and rain sensor * Manual high beam control * Additional speed limiter * Switch for body lighting * 13-pin 12V trailer socket CAB EXTERIOR * Mirrors adapted for body width: 2,350 mm * Wide wheel arch covers * Blind spot radar behind cab * Fuel filler neck in B-pillar * Turn assist system passenger side (BSIS) * Tire pressure monitoring system (TPMS) * Proximity monitoring (MOIS) * Proactive steering assistant with lane departure warning (ELK) * Emergency brake assistant AEBS with city brake * Electrically adjustable & heated exterior mirrors * Splash guards on front axle * Additional vehicle key with remote control CAB INTERIOR / AUDIO * Advanced Driver Distraction Warning * Central locking with remote control * Grab handle on A-pillar * Rear wall insulation * Traffic sign recognition with intelligent speed assist (ISA) * Electric windows for front entry doors * Left-hand drive for right-hand traffic * Front airbags for driver and passenger with belt tensioners * Pre-installation for alcohol interlock system * 90 km/h speed limiter * Overhead storage above windshield * Smoker package, ashtray and cigarette lighter * 12V connection for windshield OBU CHASSIS * Spare wheel mount at end of frame * 20L AdBlue tank under cab * Weight configuration: 2,500/5,350 kg * Spare wheel matches vehicle tire specs * Rear underride guard * ESP system * Integrated 90L fuel tank * Manual parking brake, center position * 225/75 R16 tires * Reinforced front axle * Ball-type trailer hitch ENGINE / TRANSMISSION / AXLES * PTO preparation * Rear axle ratio: i 4.23 * Standard oil pan * Aluminum radiator * Emissions standard EURO VI E * Heated crankcase ventilation * Settings for special fuels (HVO/GTL) * Heated fuel filter * Comfort sound insulation * Manual transmission FT 50.6 * Alternator: 3,500W (14V x 250A) * Documentation in German * 4x2 MY24 * 225/75 R16 all-season tires * Digital operation and maintenance manual—available via Iveco Easy Guide app COMFORT PLUS * USB sockets on driver and passenger sides * My Iveco infotainment, 10-inch with navigation * Integrated Alexa voice assistant * Passenger bench with multi-function tray and storage compartment * Fog lights * Automatic climate control with pollen filter and exterior temperature display * Adaptive cruise control (ACC) * 170ccm air conditioning compressor Lajdpfxsx S S R Sj Acfef * Comfort head restraints WINTER PACKAGE * Auxiliary hot water heater * Luxury driver's seat with armrest and lumbar support, adjustable in height, tilt, and length, hydraulically suspended and heated * Heated windshield CONSTRUCTION * Electronic differential lock (EDS)

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 08/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,200 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Are you looking for a different model, a different engine specification, different dimensions, or additional features? Feel free to contact us. We offer financing and leasing at attractive terms – also available for the Netherlands, Austria, and for new businesses! ----VEHICLE * Wheelbase: 3,450 mm * Manual transmission * Single cab * Rear twin tires * Gross vehicle weight: 7.2 tonnes SEATING * Seat belt tensioner, passenger side Lajdpfjx S S Rrox Acfsf * Fabric seat upholstery ELECTRICS/LIGHTING – ConnectivityBox 4G * Daytime running lights * Accident data recorder * Digital tachograph (EU) 4.1 * Battery 12 V 105 Ah (AGM) * Light and rain sensor * Manual high beam control * Additional speed limiter * Switch for body lighting * 12V 13-pin trailer socket CAB EXTERIOR – Mirrors for body width 2,350 mm * Wide wheel arch trim * Blind spot radar behind the cab * Fuel filler neck integrated in B-pillar * Turn assist system, passenger side (BSIS) * Tire pressure monitoring system (TPMS) * Front area monitoring (MOIS) * Proactive steering assistant with lane keeping (ELK) * Emergency braking assistant (AEBS) with City Brake * Electrically adjustable and heated exterior mirrors * Mud flaps on front axle * Additional vehicle key with remote control CAB INTERIOR / AUDIO – Advanced driver distraction warning system * Central locking with remote * Grab handle on A-pillar * Rear wall insulation * Traffic sign recognition with intelligent speed assistance (ISA) * Electric windows for front doors * Left-hand drive for right-hand traffic * Front airbags for driver and passenger with belt tensioners * Preparation for alcohol interlock * Speed limiter 90 km/h * Overhead storage above windscreen * Smoking package: ashtray and cigarette lighter * 12V socket for windscreen OBU CHASSIS – Spare wheel carrier at frame end * 20-liter AdBlue tank under cab * Weight variants: 2,500/5,350 kg * Spare wheel matching tire specification * Rear underrun protection * ESP system * Integrated 90-liter fuel tank * Manual handbrake, center-mounted * 225/75 R16 tires * Reinforced front axle * Towbar with ball head ENGINE / TRANSMISSION / AXLES * PTO preparation * Rear axle ratio i = 4.23 * Standard oil pan * Aluminum radiator * Emission standard EURO VI E * Heated crankcase ventilation * Settings for special fuels (HVO/GTL) * Heated fuel filter * Comfort sound insulation * Manual transmission FT 50.6 * Alternator 3,500 Watt (14 Volt x 250 Ampere) * German documentation * 4x2 MY24 * 225/75 R16 all-season tires * Electronic operation & maintenance manual – user manual accessible via app (Iveco Easy Guide) COMFORT PLUS * USB sockets, driver and passenger side * My Iveco infotainment 10-inch with navigation * Integrated Alexa voice assistant * Passenger bench seat with multifunction tray and storage compartment * Fog lights * Air conditioning with automatic climate control, pollen filter, and outside temperature display * Adaptive cruise control (ACC) * 170cc A/C compressor * Comfort headrests WINTER PACKAGE * Additional hot water heater * Luxury driver's seat with armrest and lumbar support, height, tilt, and longitudinally adjustable, hydraulically suspended, heated * Heated windscreen CONSTRUCTION * Electronic differential lock (EDS)

Condition: used, Year of construction: 2011, Web Width: 850 mm 1. Unwinding and Infeed System - Unwinder with constant web tension control - Web guiding and stabilization unit - Electronically controlled infeed system with precise tension regulation - Complete drive package for accurate web handling 2. Rewinding System - Single-shaft rewinder, max. roll diameter: 1000 mm - Constant tension control for stable winding 3. Surface Treatment & Web Cleaning - Corona treatment unit for surface energy optimization (pre-print) - ACE single-sided contact roller web cleaner for dust and particle removal 4. Printing Units Flexographic Printing Section - 8 flexo printing units with: - Central impression drum - Removable ink drawer (excl. anilox rollers) - Optional flexo features: - Explosion-proof configuration (per print station) - Drum cooling system - Lightweight anilox rollers: - 5 units (195–300 lpi) with gear - 5 units (>300 lpi) with gear - 24 print sleeves with cams - 2 additional ink drawers (tray + rubber roller) - 1 trolley for ink drawers (3 slots: 2 in use + 1 reserve) Special Flexo Units - 1 cold foil trolley - 1 movable cold foil unit (can be positioned at any print station, rail-free design) Rotogravure Printing Section - 1 rotogravure station for front- or reverse-side printing, includes: - Reversing bar for reverse-side printing - Designed for PETROCOLL cold-seal coating (2.8–3.2 g/m² at 180 m/min on paper) - Rotogravure trolley for mobile positioning - Extended hot air drying system: - “Super Hood” with 32 high-efficiency blowers - Methane gas burner for heating - Integrated cooling unit - Electrostatic assist for ink transfer Laedpfxey Ey Nis Acfof - 3 rotogravure print sizes (16”–26”) - Solvent ink viscometer - Pump and ink supply tank 5. Drying and UV Curing - 8 UV curing units, 22 kW each (one per print station) - Integrated cooling for UV lamps - Drum cooling for heat-sensitive substrates 6. Die-Cutting and Finishing Units - Rotary die-cutter, working width up to 530 mm - Base unit for die station - Trim removal system (up to 530 mm wide) - Matrix waste pressure system (limit: 530 mm) 7. Slitting Section - Shear (scissor) slitting system - 6 Helios box knives with self-sharpening counter blades 8. Electronic Control & Inspection - OMET electronic register control for 8-color operation - Includes “gate” function for accurate registration - Vision system for real-time print inspection - Motorized E+L Elscan camera for high-resolution web monitoring 9. Safety and Compliance - Complete CE-compliant safety guards and emergency stop systems - Designed for ergonomic operation and rapid job changeovers

Condition: used, Year of construction: 2016, General technical data: Machine type: Flexographic printing press Web width: 430 mm Number of colors: 6 Equipment & Configuration: • 1-side tape cleaner Ledpeyn Sb Ujfx Acfeaf • 1-side corona treatment • 3 die-cut stations • 2 gap master units • Delivery: reel or sheet with folding table • 6 UV IVT lamps • Turning bar • Delam/Relam unit – 1 color • 3 sets of sleeves • 6 anilox rollers • 3 magnetic cylinders

Condition: used, Year of construction: 2002, Machine type: Flexographic printing press Web width: 520 mm Number of colors: 8 Equipment & Configuration: • 7 UV LED units + 1 UV unit • 5 sets of sleeves • 5 magnetic cylinders • 12 anilox rollers • Cold foil unit – 1 • Turning bar – 1 • 2 die-cut stations • Double-shaft rewinder Lodpfx Acsyn Scljfjaf

Condition: used, Year of construction: 2017, Maximum printing width: 1,650 mm Maximum web width: 1,700 mm Printing repeat: 430 – 880 mm Maximum mechanical speed: 600 m/min Suitable for solvent-based inks and coatings CFK Air Base mandrel printing cylinder system Stork CFK Air Base anilox sleeve system Gas drying system with Maxon burners Automatic viscosity control system Allstein / Inkspec Automatic ACLEAN ink cleaning system AVISCO viscosity control ARUN automation package Hydrostatic central impression cylinder bearings Unwind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shaftless * Material width: 850–1,700 mm (shaftless); minimum 450 mm with winding shaft * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Rewind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shafted * Material width: 450–1,700 mm * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Suitable for printing on: • PET Lajdpfxezp R Dps Acfef • BOPP • OPA • LDPE • HDPE • PP films

Condition: used, Year of construction: 2000, The Carint central impression flexographic printing press is designed for printing on PE, PP, OPP, PET films, and paper. The machine features 6 printing units (6+0), a geared drive, and is suitable for a wide range of flexible packaging applications. Material width: 1,280 mm Printing width: 1,250 mm Print repeat: Min: 360 mm / Max: 1,040 mm Mechanical speed: Up to 300 m/min UNWINDER AND REWINDER The machine is equipped with a non-stop turret unwinder and a non-stop turret rewinder. Maximum reel diameter: 800 mm. Expanding shafts: 3" DRYING SYSTEM Electrical drying system. INK SUPPLY Lasdpfszku Nlsx Acfjf 6 pneumatic ink pumps. ACCESSORIES • Motorized longitudinal register • Chamber doctor blade system • 8 Anilox cylinders • 6 Plate cylinders • Video inspection system • Web guides • Banana rollers • Plate cylinder lifting hoist • 2 electrical hoists • 2 cylinder storage racks with 6 cylinders of various repeat sizes

Condition: used, Year of construction: 2001, 8 colors Printing width (endless sleeves) Max.: 1270 mm Printing width (non-endless sleeves) Max.: 1250 mm Maximum mechanical machine speed: 460 m/min Gear pitch: 10 mm Printing length / repeat: 300–1200 mm Material width: max. 1320 mm Materials Suitable for processing: LDPE, PP, PA: 20–150 µm HDPE, OPP: 12–100 µm Laminated films: max. 120 µm Paper: 30–120 g/m² Lajdpfxezvfgfs Acfof Unwind / Rewind Maximum roll diameter, unwind: 1000 mm Maximum roll diameter, rewind: 1000 mm Core inside diameter: 76 mm Core outside diameter: 85 mm Maximum roll weight: 1240 kg Drying system Printing unit supply air: max. approx. 5,250 m³/h Printing unit fresh air: approx. 2,620 m³/h Bridge supply air: max. approx. 8,430 m³/h Bridge fresh air: approx. 2,150 m³/h Recirculated air: approx. 5,600 m³/h Supply air temperature, printing unit: max. 100 °C Supply air temperature, bridge: max. 120 °C Equipment / Features W&H Turboclean ink supply system Unwind and rewind units Drying system Corona treatment Operator control system Printing cylinders and accessories Anilox rollers Portalift system

Condition: used, Year of construction: 2003, General technical data: Machine type: Flexographic printing press Web width: 330 mm Number of colors: 6 Laedpfx Ajyn Scfecfef Equipment & Configuration: • Turning bar • 2 die-cut stations • 2-shaft rewinder • 6 UV IVT lamps • Video camera system • 3 sets of cylinders • 6 anilox rollers • 3 magnetic cylinders

Condition: used, Year of construction: 1996, Machine type: Flexographic printing press Web width: 520 mm Number of colors: 2 Equipment & Configuration: • Unwinder Ø1000 mm • Rewinder Ø1000 mm • 2 UV lamps Lodpoyplxisfx Acfeaf • 2 die-cut stations • Delivery: reel or sheet with folding table

Condition: used, Year of construction: 2013, General technical data: Machine type: Flexographic printing press Web width: 530 mm Number of colors: 10 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • Turning bar Laedpfx Aeyplyascfof • Delam/Relam unit – 1 color • Cold foil unit – 1 • Die-cut station – 1 • Master gap unit – 1 • Rewind shaft – 1 • 10 UV GEW lamps • 3 sets of sleeves • 10 anilox rollers • 3 magnetic cylinders

Condition: used, Year of construction: 2010, Material width: 760 mm Speed 400 m/min Laodpfx Acoy Ntnmjfsf 6 x offset printing unit 2 x Flexp printing unit UV drying Cold foil Inline laminating unit

Condition: used, Year of construction: 2011, Printing & Processing Units: - 5 x EXL offset printing units (single) Laodpfx Ajy Rp E Docfsf - 1 x Flexo printing unit (single) - 1 x EC printing unit on rail - 7 x UV drying stations (GEW HCP) - Corona S-unit - Die-cutting and laminating nip - Laminating unit – unwind / rewind Web Handling - Combination unwind / infeed unit S-1000 - Web cleaning unit (TEKNEK, single) - Web turner unit with backside reading - Combination outfeed / rewind unit S-1000 - Edge trimmer / crush cut unit Registration & Control - Single matrix unit - Double vertical die unit (SD) - Main control unit - Web video powerscope 4000 (motorized) - ELTROMAT key adjustment system Auxiliary Systems - Technotrans water dampening system - Cooling water in / out for cooling rollers (UV system) - Exhaust air connection (max. 70 °C)

Condition: used, Year of construction: 2008, Web width: 1320 mm Printing width: 1300 mm Printing repeat: 450 mm - 900 mm Unwinder type: Double Unwinder diameter: 1000 mm Rewind unit type: Double Rewinder diameter: 1000 mm Rewinder and unwinder: non-stop operation Maximum printing speed: 350 m/min Drying system: oil-based (oven not included in the machine) Printing capability: 8+1 (reverse printing of 8 sets) LEL concentration detection system Ledoy Ty Uzjpfx Acfoaf Additionally: Corona treatment Printing support: ESA 24V ACE – upgraded in 2021 Viscometer system on printing stations Eltromat BST print control system – upgraded in 2019 Two BST cameras for viewing the print from both sides of the film – upgraded in 2016 Automatic CO2 fire extinguishing system Allen Bradley drive train communication module replacement – 2020 Shafts for hollow cylinders, screwed – 25 pcs Shafts for hollow cylinders, folded – 18 pcs Pressers (sleeves): 126 pcs

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm Laodpfx Acevakdzefef PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: ready for operation (used), Year of construction: 1994, Web width: Max 1250 Print width: 1230 mm Lajdpfxjwvvwdj Acfef Print repeat Max 760mm , Min 300mm Max. mechanical speed: 300 m/min Single unwind Max. unwind diameter: 1250 mm Drying type Boiler Substrate types: Paper, polyethylene (PE), polypropylene (PP), and other flexible packaging materials Ink system: Solvent-based inks/water-based inks

Condition: used, Year of construction: 2007, The machine has undergone extensive modernization, including: • Regi-Star 20 register control upgrade • IPQ Check Pro 100% print inspection system HELIOSTAR S DRIVE RETROFIT The original gravure cylinder drive system has been upgraded to the latest Heliostar S configuration, including: • New gravure cylinder drive motors • Upgraded inking roller drive system • New cylinder chucks with adapters • Chuck drive supports • Chuck sensor system • New gravure cylinder bearings • Upgraded sidelay register components • New sidelay register drive units • New sidelay register safety guards • Mechanical retrofit and mounting components • Electrical accessories and complete technical documentation FEATURES • Excellent mechanical condition • Outstanding cosmetic condition • Fully operational and production ready • Extensive modernization program • High-performance automatic turret unwind and rewind • Gas-heated drying system • Integrated corona treatment • Automatic ink viscosity control • BST 100% web inspection • Suitable for high-quality flexible packaging production Lajdpfxszrugto Acfjf TECHNICAL SPECIFICATIONS Specification Details Printing Process Rotogravure Number of Colours 8 Web Width 1,020 mm Maximum Print Width 1,000 mm Print Repeat Range 450 – 1,050 mm Unwind Diameter 1,000 mm Unwind System Turret flying splice with reel lift Drying System Gas heated Corona Treater Yes Ink Viscosity Control Yes Edge Guide System Yes Inspection System BST Rewind Diameter 1,000 mm Rewind System Turret flying splice with reel lift (76 mm & 152 mm cores) Machine Features • 8-colour high-performance rotogravure printing press • Automatic turret unwind and rewind with flying splice • Gas-heated drying system • Integrated corona treatment • Automatic ink viscosity control • Web edge guiding system • BST web inspection system • Suitable for high-quality flexible packaging and converting applications • Robust W&H engineering for reliable, high-speed production Applications Ideal for printing: • Flexible packaging • Food packaging • Industrial packaging • Laminating films • Printed plastic films • High-quality packaging materials

Condition: used, mileage: 311,602 km, power: 114 kW (155.00 HP), first registration: 06/1998, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 05/2024, color: green, gearing type: mechanical, loading space length: 3,800 mm, loading space width: 2,209 mm, loading space height: 40 mm, * Manual transmission * 7 seats * Double cab Lsdpjvhwgxsfx Acfsaf * Three-way tipper * Curb weight: 4,550 kg * 40 mm Rockinger towing eye * Ball hitch coupling -----Internal vehicle number: 9331----Subject to errors and prior sale. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to message us conveniently via WhatsApp. Whatsapp Whatsapp