Used Dumeta D-Hgz-5-D for sale (85,003)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 10,816 h, load capacity: 3,500 kg, lifting height: 4,650 mm, free lift: 1,430 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, fork carriage width: 1,150 mm, empty load weight: 5,665 kg, total length: 2,750 mm, drive type: Diesel, construction width: 1,250 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Gsdez Htigjpfx Afuskc Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 80 - 100% Battery year of manufacture: 2018 Double auxiliary hydraulics, roof screen, blue spot light, 2 front work lights, 1 rear work light.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 15,942 h, load capacity: 5,000 kg, lifting height: 3,230 mm, free lift: 1,560 mm, fuel type: diesel, mast type: duplex, construction height: 2,476 mm, fork carriage width: 1,450 mm, fork length: 1,450 mm, empty load weight: 6,515 kg, total length: 3,200 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 500 Gkodpfsz Htiyox Afusc ISO class: Integrated Mast type: Duplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 300-15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 250-15 Rear tire condition: 80 - 100% Battery year of manufacture: 2019 Double auxiliary hydraulics, integrated fork positioner with side thrust (GV: 420mm-1380mm), cabin, heater, air conditioning, single-pedal operation, blue spot, lighting according to StVZO (German Road Traffic Licensing Regulations), 2 work lights at the front, 1 work light at the rear.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,499 h, load capacity: 3,500 kg, lifting height: 4,650 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,230 mm, fork carriage width: 1,150 mm, empty load weight: 6,172 kg, total length: 2,800 mm, drive type: Diesel, construction width: 1,250 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 60 - 80% Rear tire type: Superelastic Gksdpfez Htkkjx Afusc Rear tire size: 2 x 23x9-10 Rear tire condition: 40 - 60% Battery year of manufacture: 2019 Double auxiliary hydraulics, single-pedal control, single-lever control, 2 work lights at the front.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,714 h, load capacity: 4,500 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: simplex, construction height: 2,771 mm, fork carriage width: 1,400 mm, fork length: 2,200 mm, empty load weight: 6,880 kg, total length: 3,200 mm, drive type: Diesel, construction width: 1,600 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Pneumatic Front tire size: 2 x 300R15 Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 2 x 250/70R15 Rear tire condition: 0 - 20% Battery year of manufacture: 2015 Gksdpfoz H E A Sex Afusc Double auxiliary hydraulics, integrated fork positioner with side shifter, cabin with heater, 4 work lights at the front, 1 work light at the rear.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 9,015 h, load capacity: 2,500 kg, lifting height: 4,650 mm, free lift: 1,420 mm, fuel type: diesel, mast type: triplex, construction height: 2,180 mm, fork carriage width: 1,150 mm, empty load weight: 4,430 kg, total length: 2,700 mm, drive type: Diesel, construction width: 1,320 mm, Diesel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Gkjdpfx Ajz H E Dcjfusc Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 60 - 80% Battery year of manufacture: 2019 Additional single hydraulic circuit, 3rd valve to fork carriage, full free lift, single-pedal and single-lever operation

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 17,812 h, load capacity: 5,000 kg, lifting height: 3,100 mm, fuel type: diesel, mast type: simplex, construction height: 2,471 mm, fork carriage width: 1,350 mm, empty load weight: 6,675 kg, total length: 3,100 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 500 ISO class: FEM 3A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Gedpfx Afjz H E Nfeuekc Front tire size: 2 x 300-15 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 250-15 Rear tire condition: 60 - 80% Battery year of manufacture: 2013 Additional single hydraulic circuit, fully enclosed cabin with heater, dust protection, single-pedal operation, single-lever operation, 2 work lights at the front, 1 work light at the rear.

Condition: used, Year of construction: 2001, operating hours: 3,824 h, Rental possible Gkjdpfxez Hid Ho Afuoc = Further information = Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2015, operating hours: 8,195 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,960 mm, motor manufacturer: VW, gearing type: automatic, fork length: 1,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, UVV, air conditioning, cabin, hydraulic fork positioner, lighting, pallet forks, sideshift, Technical Specifications * Manufacturer: Linde Material Handling * Model: H25D - 02 * Year of Manufacture: 2015 * Load Capacity: 2,500 kg Gkodpoz H Tm Sefx Afujc * Operating Hours: 8,195 h * Mast: Triplex * Lifting Height: approx. 4,700 mm * Free Lift: approx. 1,600 mm * Side Shifter and Fork Positioner * Drive: Diesel * Dead Weight: 3,725 kg Equipment: * Air Conditioning * Heater * Lighting according to STVO (German Road Traffic Regulations) * Triplex Mast * Work Lights: 2 front, 2 rear * Reversing Light * Comfort Seat with Seat Heating * Hydraulic Additional Functions: 3rd and 4th Valve * CE Version Condition * Immediately ready for operation * Recently serviced * Next service due in approximately 900 operating hours * Engine and hydraulics are functioning perfectly * Technically in good condition * Optically well-maintained Price: 16,900 EUR net, negotiable Inspection and test drive possible by arrangement. Loading and transport can be arranged. If you have any further questions, please feel free to write or call.

Condition: like new (used), 3 face plates, cast iron. Each with an outer diameter of 500 mm. 1 unit with through-hole = 128 mm Gjdpfx Asz Hpdmefuskc 1 unit with through-hole = 90 mm 1 unit with through-hole = 80 mm.

Condition: used, mileage: 599,947 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty whatsoever, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typographical errors, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 115) First registration: December 16, 2013 599,947 km Engine: 6,871 cc 213 kW / 289 hp Euro 5 EEV MOT until 10/2026, technical inspection until 07/2027 Permissible total weight: 19,500 kg, unladen weight: 11,285 kg, payload: 7,215 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,225 mm Double doors at the front and rear Driver's cab with door 38+2 emergency seats + 40+1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system connected to the cash register Tires: 275/70R22.5, front approx. 60%, rear approx. 80/80% Various signs of wear and tear, consistent with the age Good overall condition Last inspection at 565,195 km on April 23, 2025, next inspection at 625,195 km January 20, 2025: Air reservoir replaced. October 2, 2025: Head gasket + valve cover gasket + engine mount on the passenger side rear replaced. January 28, 2026: Brake pads on the front axle replaced, brake caliper on the front axle, driver's side, replaced. Gedpfx Afez Iihususkc Price: €12,000.00 (net) All information is provided without any warranty whatsoever. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: Gkjdpez N Nrksfx Afuoc 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,252 h, load capacity: 4,500 kg, lifting height: 5,500 mm, free lift: 2,050 mm, load center: 700 mm, fuel type: diesel, mast type: triplex, construction height: 2,900 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,400 mm, fork width: 150 mm, fork thickness: 60 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200 / 50 - 10, rear tire type: cushion tires (black), rear tire size: 250 - 15, overall weight: 11,690 kg, empty load weight: 7,190 kg, total height: 2,600 mm, total length: 2,650 mm, total width: 2,250 mm, color: orange, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, fork extension, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, 🔥 HUBTEX DQ45-D | TRIPLEX 5500 MM | FORK POSITIONER | FREE LIFT | FULL CABIN | READY TO WORK 🔥 🔧 FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🚛 TRANSPORT THROUGHOUT EUROPE AND WORLDWIDE If you are looking for a forklift that will start generating profit from day one instead of incurring service costs, this offer is for you. We offer a proven and professionally prepared HUBTEX DQ45-D multidirectional forklift. The machine has undergone a complete technical inspection, full service, and thorough testing. It is ready for immediate operation in a production facility, warehouse, or logistics center. ⭐ KEY ADVANTAGES ✔ Full service completed before sale ✔ Start-up warranty ✔ Brand new super elastic tires ✔ Very good technical and visual condition ✔ Ready to work without additional investment ✔ Live online presentation available ✔ Direct delivery to your company available 📋 TECHNICAL DATA 🏭 Manufacturer: HUBTEX 🔹 Model: DQ45-D 📅 Year: 2012 🏋️ Lifting capacity: 4500 kg ⛽ Engine: DIESEL ⏱️ Operating hours: 4252 h ⬆️ Mast: TRIPLEX 📏 Lifting height: 5500 mm 🔝 Free lift: 2050 mm ↔️ Fork positioner: 1250 mm 🔱 Fork length: 1400 mm ⚖️ Load center: 700 mm 🚪 Cabin: Full and heated ⚙️ Operating weight: 7190 kg 📐 DIMENSIONS ↕️ Height: 2600 mm with air conditioning ↔️ Length: 2650 mm ↔️ Width: 2250 mm 📏 Overall construction height: 2900 mm 🛞 TIRES Front: 200 x 50 - 10 SE super elastic Rear: 250 - 15 SE super elastic Condition: 100 percent NEW ⚙️ EQUIPMENT ✔ Fork positioner ✔ Full heated cabin ✔ Free lift ✔ Working lights ✔ Warning beacon ✔ Windscreen wipers ✔ Sliding windows ✔ Camera system 🏗️ IDEAL FOR 🪵 Timber industry Gedpfez H A R Hex Afujkc 🏭 Steel mills and steel stockholders 🔩 Steel construction manufacturers 🔧 Handling pipes, profiles, and long materials 🏢 Indoor and outdoor operation 💼 WHY FT LOGISTICS FT LOGISTICS specializes in forklifts, sideloaders, multidirectional forklifts, and professional warehouse equipment. Every machine undergoes a technical inspection, complete service, and comprehensive testing before delivery to the customer. 🌍 We have more than 100 machines available in stock and deliver equipment throughout Europe, South America, Africa, Asia, and the Middle East. 🤝 WE PROVIDE ✔ Full service before sale ✔ Warranty ✔ Professional technical advice ✔ Leasing and financing ✔ International transport organization ✔ Export services and customs documentation ✔ After-sales support Hundreds of customers throughout Europe have trusted our machines and return to us for further purchases. 📹 Live online machine presentation available 📸 Additional photos and videos on request 🚛 Individual worldwide transport quotation available FT LOGISTICS 🚀 WE DELIVER MACHINES READY TO WORK.

Condition: used, mileage: 926,538 km, power: 210 kW (285.52 HP), first registration: 09/2006, fuel type: diesel, number of seats: 37, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typographical errors, and prior sale: Mercedes Benz Citaro (emergency seats) (Vehicle 155) First registration: 08.09.2006 926,538 km Engine: 6,374 cc 210 kW / 286 hp Euro 5 EEV MOT valid until 01/2027, technical inspection valid until 10/2026 Permissible gross vehicle weight: 19,000 kg, unladen weight: 11,340 kg, payload: 7,660 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front: 80% remaining tread, rear: approximately 30/30% remaining tread, inner tires: approximately 40/40% remaining tread Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microwave Manual windows 2 x electric and heated mirrors Auxiliary heating + 2nd heating Retarder Stop brake LAWO system connected to the cash register Emergency stop 12-volt socket Tie rods corroded 14.02.2024: Alternator tensioner replaced, 07.05.2025: Radiator replaced, water pump sealed, 07.04.2026: Upper control arms on the front axle (left and right) replaced, 26.07.2024: Brakes and discs on the front axle replaced, both brake chambers on the front axle replaced, 29.10.2024: Pressure switch for the air system, circuit 1+2, replaced with air line, 24.01.2025: Four-circuit pressure valve replaced Various signs of wear and tear, consistent with the vehicle's age Last inspection: 21.01.2025 at 873,162 km, next inspection due at 933,162 km Price: 3,000.00 (net) Gkodpfx Aoz H Ecrjfuoc All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are reserved.

Year of construction: 2021, condition: used, Clamping force: 2700kN, injection volume: 500cm³, injection pressure: 3500bar, EUROMAP size: 2700-1750, rated power: 22kW, weight: approx. 10.7t, nozzle contact force: 58kN, total current: 138A, upstream fuse: 160A, max. short-circuit current: 10kA, enclosure type (UL): 1, hydraulic motor operating hours: 730h, hydraulic pump (clamping force): 65h, operating system active: 3,360h, was regularly maintained, is in well-maintained condition, an on-site inspection is possible. Gkjdpfx Aez Ekdljfuoc

Condition: used, Year of construction: 2008, Format: 550 mm Speed: 120 Tacts er minute Equipment: Kallfass Universa 500 Servo Fully automatic, continuous side welding machine Type: Hybrid side sealer with continuous product flow Product Feed:Simple feeding system, compatible with products of different lengths and automatic production lines Transport:Vacuum conveyor belt Motion Control:SIEMENS?? SIMOTION?? with servos for all product-related drives Operator Interface:SIEMENS TP 270 touch panel Operation Mode:Continuous product flow with intermittent cross-sealing Kallfass Compact 650 D High-Performance Energy-Saving Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Godpfx Afszpghweujkc Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Gksdpoug Ty Hsfx Afusc Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight:

Condition: used, mileage: 155,900 km, power: 70 kW (95.17 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, next inspection (TÜV): 07/2025, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, This used Mercedes-Benz Sprinter 310 CDI Maxi offers a powerful and reliable option for transport. The vehicle was built in 2011, complies with the Euro 5 emissions standard, and has a mileage of 155,900 km. With a 2,143 cc diesel engine producing 95 hp and an automatic transmission, it ensures efficient transportation. The Sprinter features a cargo area and is equipped with shelves and a camera, making the interior functional. In terms of dimensions, the Sprinter measures 7,057 mm in length, 2,100 mm in width, and 2,694 mm in height, offering plenty of cargo space. This model has only been driven by one previous owner and has a valid MOT until July 2025, providing additional peace of mind. Combined fuel consumption is 9.8 l/100 km with CO2 emissions of 259 g/km. The seller offers a viewing without appointment during business hours, as well as various services such as registration services and various loading options. Delivery within Germany is possible for an additional charge. Sale only to businesses (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted. Gksdpfx Afoumxlvjujc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, Gravimetric dosing and mixing system: Mixing system with 5 gravimetric dosing units Gsdpfxet S Rduo Afujkc 5 units: • Gravimetric screw dosing unit • Feeding hopper with pneumatic rotary valve, each with a lid • Screw conveyor for feeding from a big bag, with height-adjustable individual stand 1 unit: • Trough screw for combining and conveying the dosed materials into a transfer container. 5 units: • Big bag feeding station, with a suspension crossbeam to prevent the big bag from collapsing during emptying. • Big bag disc base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control system Delivery EXW

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Gedpovvkipofx Afuokc

Condition: used, mileage: 132,110 km, power: 78 kW (106.05 HP), first registration: 05/2014, fuel type: diesel, empty load weight: 2,390 kg, maximum load weight: 1,110 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,950 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2014, construction height: 2,790 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, The Iveco Daily 35 S11 C30C is a versatile used box van with an automatic transmission and a mileage of 132,110 km. Powered by a 2,287 cc diesel engine with an output of 78 kW (106 hp), it complies with the Euro 5 emissions standard. The vehicle features a yellow paint job, a green environmental sticker, and has one previous owner. This model features a rearview camera and built-in shelving for optimized storage. The rear air suspension ensures improved driving safety and comfort, especially when fully loaded. The dimensions are 6,950 mm long, 2,790 mm high, and 2,160 mm wide, with a wheelbase of 3,750 mm. The gross vehicle weight of 3,500 kg makes the vehicle a robust choice for commercial use. This van is ideal for companies in the logistics, agricultural, or specialty retail sectors. Viewings are possible during business hours without prior appointment, and a registration service and delivery within Germany are available for an additional charge. Gkjdovxbh Uopfx Afuoc Summer body with box. Vehicle equipped with a jump seat. CoC present. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 88,000 km, power: 70 kW (95.17 HP), first registration: 07/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, next inspection (TÜV): 08/2025, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi Euro-5 offers versatile application possibilities with a spacious box body and practical shelving. The 2011 model has a mileage of 88,000 km and complies with the Euro 5 standard. Powered by a robust 2,143 cc diesel engine with an output of 70 kW (95 hp) and an automatic transmission, the vehicle offers both reliability and efficiency. With an attractive yellow metallic paint finish, four doors, and space for two seats, the Sprinter is ideal for commercial users who value both functionality and the implementation of their operational requirements. The green (4) environmental sticker also allows use in urban low-emission zones. It offers a combined fuel consumption rate of 9.8 l/100 km and CO2 emissions of 259 g/km. The interior is accessible via a passageway, and the integrated camera provides additional safety when maneuvering. With an impressive height of 2,694 mm, a width of 2,100 mm, and a length of 7,057 mm, the van offers flexibility for a variety of loading operations. The vehicle is immediately ready for use and, thanks to its current MOT stamp valid until August 2025, is ideal for immediate use. Gsdpfxjvi Stis Afuskc Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, mileage: 133,928 km, power: 78 kW (106.05 HP), first registration: 04/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, total length: 6,783 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, The Iveco Daily 35 S11 C30C is a versatile van with an impressive mileage of 133,928 km. The 2012 vehicle complies with the Euro 5 emissions standard and features a 2,287 cc diesel engine producing 78 kW (106 hp). The automatic transmission ensures a comfortable driving experience, supported by rear air suspension for additional stability and comfort. This yellow, metallic-colored used vehicle offers a sophisticated interior with integrated shelves and a rearview camera, making everyday transport operations easier. The box body offers flexible loading options, ideal for commercial applications. With a maximum height of 2,770 mm, a width of 2,177 mm, a length of 6,783 mm, and a wheelbase of 3,750 mm, this model combines functionality and practicality. Gksdpfsvkqr Hox Afusc The Iveco Daily also has a green environmental sticker, making it suitable for driving in low-emission zones. The permissible gross vehicle weight is 3,500 kg. Additional amenities include a jump seat, and the vehicle can be delivered upon request. Vehicle viewings are available during business hours. Sale only to businesses (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 104,536 km, power: 78 kW (106.05 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, total length: 6,783 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, This used Iveco Daily 35 S11 C30C is a reliable van with an automatic transmission and a 78 kW (106 hp) diesel engine that complies with the Euro 5 emissions standard. It was first registered in May 2012 and has since covered 104,536 km. The box-shaped body measures 6,783 mm in length, 2,177 mm in width, and 2,770 mm in height. With a gross vehicle weight of 3,500 kg, it is suitable for commercial use, especially for agriculture, freelancers, small and large businesses, or for export. The van is equipped with practical features such as air suspension on the rear axle, a rearview camera, and built-in shelves in the box body, which improve handling and comfort during driving and work. An additional jump seat offers greater flexibility in seating arrangement. The vehicle is delivered in a metallic yellow and has a Class 4 (green) environmental badge, making it more environmentally friendly for use in urban areas. The vehicle features various loading options and a comprehensive registration service. A viewing is easily arranged, and delivery within Germany can be arranged for an additional charge. Sale only to businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted. Gkedpfovlz N Sjx Afujc

Condition: used, Technical details: Volt: 380 V Ampere: 150 A charging voltage: 24 V total power requirement: 3,6 kW weight of the machine approx.: 100 kg Gedju Nu Srspfx Afujkc space requirements approx. LxWxH: 0,5x0,6x0,8 m Battery charger for electric forklift trucks, electric pallet trucks - 3 pieces available - All 3 devices are equipped with charging cables. Condition: not checked. On sale as is! *

Condition: used, Technical details: table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) Gksdpfsu N Dz Ajx Afusc -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *