Used Edge Bander for sale (3,687)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Fpjdpfxehy Tlro Ad Nog • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm Fsdpjc S Di Rofx Ad Nopg feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: new, ALTENDORF Model F 2 Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Fodel D Rp Eopfx Ad Njpg Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) F2/27 nesting for milling stations

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Fjdelc Ewiopfx Ad Nopg Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: excellent (used), Edge trimming machine Fodpfowiwnqex Ad Nepg Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Fodpfxeuxqzuj Ad Njpg Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 1992, Belt dimensions: 2600 x 150 mm Sanding belt motor power: 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Sanding table height-adjustable via handwheel Table size: 975 x 340 mm Height-adjustable sanding table for radii; size: 400 x 200 mm Sanding beam can be swiveled 90 ° - 0 ° Suction connection Ø 120 mm CE Space requirement (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note for used machines: Fodpfstt Da Dsx Ad Nopg - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, edge sanding machine - made in AUSTRIA Fodpfx Adj Dxrge Nspg motor 2,2 kW, 400 V, 50 Hz oszillation 0,18 kW, 400 V, 50 Hz sanding belt length 3000 mm sanding belt width 200 mm work table seize 1000/ 300 mm weight 300 kg roller DM 120 mm sanding roller DM, exchangeable 65/ 115 mm small sanding table for round sanding 350/ 250 mm mitre fence suction DM 140 mm

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine Fsdpfx Adjfbr S Rj Nspg coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Fpedpfx Ajbahd Esd Nog Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm

Condition: good (used), Year of construction: 2006, System with pump and water basin, Two spindles need repair. Swivels up to 60°, Fodorz Rgzepfx Ad Nepg Working direction: from right to left, max. height: approx. 2500 mm, Depth: approx. 1000mm, Length: approx. 6200mm, Available at the beginning of October.

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC MACHINING CENTER WITH EDGE BANDING UNIT AND ASSOCIATED POST-PROCESSING AGGREGATES. Technical Data: Fpedpfsy Hrh Tjx Ad Njg Working dimensions: + X-axis: 3,050 mm for single setup + X-axis: 900 mm for pendulum operation + Y-axis: Milling up to 1,220 mm with 25 mm tool diameter Edge banding up to 1,220 mm All aggregates up to 1,170 mm Workpiece thickness up to 60 mm with standard clamp 6 workpiece consoles for a tubeless vacuum system 4 workpiece stops in X-direction, integrated into the machine frame, for large workpieces 6 workpiece stops in the X-direction, one each integrated in the console 1 workpiece stop each on the left and right in the Y-direction 4 lifting rails for easy positioning of heavy workpieces LED positioning aid for easy placement of vacuum cups and consoles Aggregate equipment: Milling spindle 11 kW, HSK F63 Speed range 0 - 18,000 rpm Liquid cooling C-axis for use with processing units, with torque support and 3-point stabilization 12-position tool changer magazine Drilling head with 17 vertical spindles Spindle pitch 32 mm Air nozzle for cleaning workpiece edges Exchangeable edge banding unit for 360-degree edgebanding work With single-roll magazine With granulate feed Edge thickness up to 3 mm Adapter aggregates: + Horizontal boring head in cross-head design + Lock case milling unit, 2 outlets + 90-degree sawing unit + Swiveling drilling/sawing unit + Combination unit for radius milling / scraper blade Control system: POWERCONTROL with: WOOD WOP AV license WOODWOP

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes Fedjw S Dmdopfx Ad Nopg 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: good (used), For sale, Edge chamfering machine. Fpedpfx Aov T Ttfod Nog - Assfalg ASO 750. - 1.1kw engine. - We will help you organize a profitable shipping company or courier.

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. Fpsdpeyga T Njfx Ad Nog The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-200-21-3286, functionality: fully functional, input voltage: 400 V, input current: 56 A, type of input current: three-phase, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 79/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the right side. Year of Manufacture: 1999 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x3.5kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold Fpedey H Hzbspfx Ad Nog tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN11, with auto-revolver positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: excellent (used), Knife edge honing device REFORM Fedpjyidtpofx Ad Nspg

Condition: used, used, top condition Fsdpfx Adsy H N Tms Nspg Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Fjdpfxeyzxa Ej Ad Nopg Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Fpsdjxy Tm Ijpfx Ad Nog

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: Fjdpfxjy Id Nlj Ad Nopg - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Fpodpfx Aevwgizjd Nsg Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: new, Year of construction: 2026, Edge Sander Description: Sanding of curved materials using a side table. Simple and quick sanding belt replacement using a lever. Movable aggregate ensures horizontal and vertical operation. Additional table with adjustable height included as standard. Tensioning device ensures even sanding belt tension. Compact size of the device with a wide range of applications. Technical Data: Belt size: 2010 x 152 mm Worktable size: 790 x 221 mm Table height: 810 mm Stand height: 600 mm Additional rounding table size: 514 x 221 mm Fjdpfx Adsvuggze Nepg Maximum sanding length: 790 mm Dust extraction port diameter: 100 mm Edge and face sanding at an angle: 0 - 45° Belt speed: 840 m/min Motor power: 1.1 kW Power supply: 400 V Weight: 75 kg The price quoted is the net price. It does not include transportation costs

Operating hours: 7 h, condition: as good as new (ex-display), functionality: fully functional, Micro-stationary system for the production of a zero joint - jointless optics as if from a single casting A machining table is also available as an option - Heating time:ᐸ30Sekunden Fsdpfsd St R Sjx Ad Nopg - max. edge height 65mm (option 103mm), max. edge thickness 3mm - Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges) - higher heat resistance and water resistance - perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed. - sloping cut surfaces of up to 55° (installation in the available table) - high process reliability & lower follow-up costs; - no glue change necessary = almost no set-up costs; - no burning of the glue; - no glue residue on the workpiece - Infinitely variable feed speed from 1 to 5.5 m/min. - continuously adjustable hot air up to 520°C - 230VoltAC, 4m connection cable, compressed air hose - 3,05kW - low air requirement, assembly compressor is sufficient The zero joint unit can be used mobile as well as micro-stationary! Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery. The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us

Condition: new, Year of construction: 2025, functionality: fully functional, power: 34 kW (46.23 HP), input voltage: 380 V, Equipment: documentation/manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure slip-free transport. Panel conveyor The long, heat-treated semicircular guide rail allows perfect contact with the conveyor, without play. The conveyor is fixed to the machine body for stability of wide panels, with a maximum extension width of 600mm. Package for narrow parts Feeding package for narrow parts, ensuring the minimum edge width is 40 mm. Pre-milling unit Pre-milling with 2 diamond cutters, 43mm height. Two pneumatically controlled motors (2 x 3.7kW), intermittent edge milling of the panel. Panel pre-heating unit x2 Heats the panel edge so that the adhesive melts correctly, ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel edge for better bonding. Edge band support x2 The large support is at an appropriate height for easy feeding and long service life. Edge cutting unit x2 Pneumatically operated guillotine with electric switch for accurate cutting of the edge band at the end. Premelting gluing unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps the adhesive fresh. Automatic adhesive pumping + 25kg tank Adhesive is automatically pumped into the upper reservoir when the level drops below the sensor. Edge cutting unit Pneumatically operated guillotine with electrical switch for correct end-cutting of the edge band. 2 sets of pressure rollers A 100mm pre-pressing roller in coordination with four rear rollers ensures firm bonding. Lubrication system Lubrication pump for daily maintenance, lubricates the guide rail by simply actuating the lever. End trimming unit Structure with linear guide at 45 degrees, with 2 motors of 0.35kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is practically zero. Diamond knives R1.5. Fpsdpfoy Rlbnox Ad Njg Corner rounding unit Designed for rounding the edge band on the ends and lengthwise, achieving a circular radius R. 2 sets of scraping units with pneumatic actuation Two sets with different circular radius knives (one set with R1.5, the other with R1). Extraction system Each unit has its own independent extraction outlet (125mm), totaling 6 outlets. Straight glue cleaning scraping group Removes edge band residues, followed by straight scraping to remove excess adhesive from the top and bottom surfaces. Spraying unit - cleaning agent Separation agent before pre-milling, preventing adhesive from sticking to the panel surface. 2 sets of polishing units Intended for 2 adhesive colors (dark and light) to avoid contamination. Solution for narrow pieces Allows processing of parts with the following sizes: 120x120mm (4 sides), 200x40mm (long side), 40x200mm (short side). Additional conveyor roller Solid support for large or in-line panels. PUR Device 2KG/20KG – 6500 EUR + VAT Temperature control system via touch screen and uniform heating. Polyurethane-based (PUR) adhesive technology ensures superior bonding performance.