Used Eht Ehps 20-35 for sale (36,022)

Condition: used, mileage: 1,001 km, first registration: 01/1993, color: black, driver cabin: other, gearing type: other, Year of construction: 1993, Vehicle location: Bovenden, Body: grab, payload 300 kg grab width 740mm depth 600mm ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bodpji Rphnofx Ad Aelg - .

Condition: excellent (used), Year of construction: 2000, HAUG Sauer Compressors AG High-pressure piston compressor with associated pressure vessel and control cabinet Blodpfx Adski Tzus Asg Type: QTOX 120/65/35 WM-W Max. final pressure: 66 bar Volume flow: 50m³/h Nominal power: 18.5kW Nominal speed: 1450min Voltage/frequency: 400/50V/Hz Year of construction:2000 Maschinen- und Behälterbau GmbH High pressure tank up to 65bar Type MB 00320-2,10 1000 liters Year of construction:2017

Condition: used, functionality: fully functional, machine/vehicle number: 9328, Year of construction: 2017, operating hours: 10,065 h, load capacity: 12,000 kg, lifting height: 3,500 mm, free lift: 1,600 mm, fuel type: diesel, mast type: duplex, construction height: 3,240 mm, power: 129 kW (175.39 HP), fork length: 1,500 mm, empty load weight: 19,650 kg, total length: 5,790 mm, drive type: Diesel, construction width: 2,500 mm, Sideloading forklift Chassis number: 9328 Load center: 750 Fork width: 200 mm Fork thickness: 80 mm Mast type: Duplex Condition: Refurbished with warranty Technical condition: good Front tyre type: Pneumatic Bjdpfex Ekz Nex Ad Aelg Front tyre size: 14.00-20 Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 14.00-20 Rear tyre condition: 60 - 80%

Condition: used, mileage: 20,553 km, power: 260 kW (353.50 HP), first registration: 09/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, parking heater, Like-new municipal winter service truck: Mercedes-Benz Arocs 2235 4x4 all-wheel drive tipper, 22 t gross vehicle weight, equipped with Meiller three-way tipper body and Meiller winter service hydraulics, front mounting plate, additional winter service lighting, heated windscreen, differential locks on front and rear axles, automatic transmission, automatic climate control, reversing camera and much more. German vehicle, single owner, only 20,553 km, new service performed by Mercedes-Benz in 10/2025. Wheelbase: 3,900 mm Unladen weight: 10,328 kg Payload at 18,000 kg GVW: 7,672 kg Payload at 22,000 kg GVW (winter service): 11,672 kg Weight variant: 20.5 t (9.0/13.0) Permissible gross vehicle weight for winter service: 22,000 kg Increased front axle load for winter service: 10.5 t Front axle: 9.0 t straight; rear axle: bevel gear 300, planetary gears, 13.4 t Front spring: 10.5 t, 3-leaf; rear spring: 13.0 t Meiller winter service hydraulics for plough and spreader Front mounting plate with hydraulic connections Winter service lighting Heated windscreen M-cab ClassicSpace with rear window Additional thermal insulation Engine: OM936, inline-6, 7.7 l, 260 kW (354 hp), 1400 Nm, Euro 6 E Drive: 4x4 Differential locks front and rear axles Axle ratio: i = 4.143 Meiller three-way tipper body, approx. 4.60 m long x 2.42 m wide Bulkhead height: 800 mm Side boards: 600 mm high Additional removable aluminium side board extensions +400 mm Lashing eyes in tipper bed floor Automatic transmission G 211-12/14.93-1.0 Mercedes PowerShift 3 Transfer case VG 3000-3W, 1.04, engageable PTO via engine driven output Automatic climate control Auxiliary hot water heater Towing hitch: Maul Ringfeder D40 with air connections Tipper hydraulics connections at rear Towing capacity: 30,000 kg Gross combination weight: 40,000 kg Front and rear axles with leaf springs Front and rear stabilizer Electronic braking system with ABS and ASR High Performance Engine Brake Drum brakes Predictive Powertrain Control Cruise control Bledpoxlwngefx Ad Asg Engine brake Reversing camera Sun visor 290-litre fuel tank LED daytime running lights LED rear lights Fog lamps 2 rotating beacons on the rear above cab roof Rear work lights Exhaust routed vertically behind cab Electrically adjustable and heated exterior mirrors Electric windows Comfort driver's air-suspension seat Comfort central locking system with remote control Last Mercedes-Benz service performed 10/2025 German vehicle, one owner Top-maintained, like-new condition Net price plus 19% VAT. Attractive financing options available. All information subject to change. Errors and intermediate sale reserved. Internal vehicle number: 2577.

Condition: used, mileage: 20,553 km, power: 260 kW (353.50 HP), first registration: 09/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, parking heater, Almost new municipal winter service truck Mercedes-Benz Arocs 2235 4x4 all-wheel tipper with 22 t gross vehicle weight, Meiller three-way tipper and Meiller winter service hydraulics, front mounting plate, additional winter service lighting, heated windscreen, differential locks on front and rear axles, automatic transmission, automatic climate control, reversing camera, and much more. Bodpsxlwnaefx Ad Aolg German one-owner vehicle with only 20,553 km (odometer), new service performed by Mercedes-Benz in 10/2025. Wheelbase: 3,900 mm Unladen weight: 10,328 kg Payload with 18,000 kg gross weight: 7,672 kg Payload with 22,000 kg gross weight (winter service): 11,672 kg Weight variant 20.5 t (9.0/13.0) Permitted gross weight during winter service: 22,000 kg Winter service front axle load increased: 10.5 t Front axle: 9.0 t straight, Rear axle: bevel gear 300, planetary design, 13.4 t Front leaf spring: 10.5 t, 3-leaf; Rear leaf spring: 13.0 t Winter service hydraulics by Meiller for plough and spreader Front mounting plate with hydraulic connections Winter service lighting Heated windscreen M-driver’s cab ClassicSpace with rear window Additional heat insulation Engine: OM936, R6, 7.7 l, 260 kW (354 HP), 1400 Nm, Euro 6 E Drive: 4x4 Differential lock front and rear axle Axle ratio i = 4.143 Meiller 3-way tipper, approx. 4.60 m long x 2.42 m wide Bulkhead height: 800 mm Side walls: 600 mm high Removable aluminium side wall extensions +400 mm Lashing pockets in tipper body floor Automatic transmission G 211-12/14.93-1.0 Mercedes PowerShift 3 Transfer case VG 3000-3W, 1.04 selectable PTO via engine power take-off Automatic climate control Auxiliary heater – hot water additional heating Tow hitch Maul Ringfeder D40 with air brake connections Tipper hydraulics connections at rear Towing capacity: 30,000 kg Gross train weight: 40,000 kg Front and rear leaf suspension Front and rear axle stabilisers Electric braking system with ABS and ASR High Performance Engine Brake Drum brakes Predictive Powertrain Control Cruise control Engine brake Reversing camera Sun visor 290 litre tank LED daytime running lights LED rear lights Fog lights 2 rotating beacons to the rear, above the cab roof Rear work lights Exhaust raised behind cab Electrically adjustable and heated exterior mirrors Electric windows Comfort driver’s air-suspended seat Central locking with remote control Last Mercedes-Benz service performed in 10/2025 German one-owner vehicle Meticulously maintained and as-new condition Price NET plus 19% VAT. Attractive financing options available upon request. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2577

Condition: used, Year of construction: 2003, SCM SANDYA 20 model 20 M3 135 calibrating and sanding machine, used Year of manufacture: 2003 Serial number: AE/024903 Maximum working width: 1350 mm Feed speed: 3.5-18 m/min with inverter Working height: 4-170 mm Vacuum bed: 7.5 KW Configuration: 1st group: grooved steel calibration roller D. 250 – motor 22 KW 2nd group: sanding roller D. 250, hardness 45 SH – two-speed motor 9/11 KW, 1400/2800 rpm Blodexwbydepfx Ad Ajg 3rd group: combined roller D. 170, hardness 30 SH + segmented elastic pad (46 segments) – motor 11 KW with inverter 4th group: scotch brite finishing roller Bed positioner with workpiece Belt size: 2620 x 1370 mm Blowers for 2nd and 3rd belt Automatic belt centering Electronic control of 1st / 2nd / 3rd roller / pad

Year of construction: 2013, condition: excellent (used), Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working. Blsdpfevr U Syex Ad Asg

Condition: used, mileage: 233,206 km, power: 259 kW (352.14 HP), first registration: 07/2003, fuel type: diesel, overall weight: 17,990 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, Equipment: air conditioning, all wheel drive, crane, Tel.: call (Contact · Phone · Mobile · WhatsApp) * Iveco Euro Trakker 190 E 35 W 4x4 all-wheel drive * Front crane with Meiller tipper * Manual transmission Blodpor Ex A Ssfx Ad Aeg * Full leaf spring suspension * Air conditioning * VIN: WJMB1VPS10C119715 * Engine type: F2BE0681A * kW: 259 * Euro 3 * Displacement: 7790 cc * Unladen weight: 12,500 kg * Gross vehicle weight: 17,990 kg * Payload: 5,415 kg * Wheelbase: 4,200 mm * Vehicle length: 7,500 mm * Vehicle width: 2,550 mm * Vehicle height: 3,700 mm * Tires: 315 / 80 R 22.5---- * Front crane * Hiab 122 E S - 3 PRO * Radio remote control * 4 hydraulic extensions---- * Net price * All information without guarantee

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, operating pressure: 350 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 160 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 13/35-4 CAGE Blsdpfxev N Hlmo Ad Aeg 2019 year of production The device has new accessories, including a pressure gun, stainless steel lance, steel braided hose and 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 350bar and 1300l / h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Voltage [Ph / V / Hz]: 3 / 400 / 50 Pumping capacity [l / h]: 500 - 1300 Inlet water temperature [°C]: max 60 Working pressure [bar]: 100 – 350 Connection power [kW] 15 Weight with accessories [kg] 160 Dimensions (length × width × height) [mm]: 930 × 800 × 920 EQUIPMENT: NEW durable 500bar pressure gun NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 15m NEW power nozzle 25° Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service

Condition: used, Manufacturer: EXNER Type: EX 20 Maximum pressing force: 20 t Bledpfxsxbf Nds Ad Ajg Table size: 480 x 350 mm Maximum tool height: 230 mm

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film Blsdpfx Adoykucme Aeg F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm Bodpfxoykuias Ad Aslg ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Bljdpfx Adjykub Aj Aeg Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: R201204B9, overall weight: 252 kg, Equipment: safety light barrier, TECHNICAL DETAILS Control Control model: A05B-2611-B382 Control serial number: E20110087 Gripper Design: Vacuum gripper Drive: Single zone MACHINE DETAILS Total weight: 252 kg Operating hours: approx. 1,000 h EQUIPMENT Safety enclosure with Allen Bradley PLC Sick laser scanners, 2 units Light barriers, 4 units Bledpfx Adjy Hiy Te Ajg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, No reserve price – guaranteed sale to the highest bidder! Bsdpfx Ajy Exdxed Aelg TECHNICAL DETAILS Clamping force: 220 t Screw diameter: 55 mm + 40 mm Maximum injection volume: 618 cm³ + 251 cm³ MACHINE DETAILS Mounting platen: 960 x 830 mm Minimum mold installation height: 320 mm Maximum mold installation height: 730 mm EQUIPMENT EC100/A03 Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced costs for disassembly and loading.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, screw diameter: 55 mm, displacement volume: 618 cm³, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 220 tons Bedjy Ew S Iepfx Ad Ajlg Screw diameter: 55 mm Volume: 618 cm³ MACHINE DETAILS Platen size: 860 x 830 mm Minimum mould installation height: 250 mm Maximum mould installation height: 730 mm Note: When purchasing multiple items from the same location (see offers below), the lower cost for dismantling and loading will be applied.

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Bljdjihf Tpspfx Ad Asg Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: new, functionality: fully functional, empty load weight: 945 kg, maximum load weight: 2,555 kg, overall weight: 3,500 kg, axle configuration: 3 axles, permissible axle load (axle 1): 1,500 kg, permissible axle load (axle 2): 1,500 kg, permissible axle load (axle 3): 1,500 kg, loading space length: 3,940 mm, loading space width: 1,800 mm, loading space height: 270 mm, loading space volume: 1.91 m³, total length: 5,750 mm, total width: 2,300 mm, total height: 1,850 mm, tire size: 185/60R12, tire condition: 100 %, color: grey, Year of construction: 2025, operating hours: 1 h, Equipment: jockey wheel, === KEY SPECIFICATIONS === Year: 2025 First registration: 29-10-2025 Machine type: Trailer; machine transporter Gross vehicle weight: 3,500 kg Net payload: 2,555 kg Empty weight: 945 kg Number of axles: 3 Braked trailer: Yes Loading floor: Aluminium Load bed dimensions: 394 x 180 cm Overall dimensions: 575 x 230 x 185 cm Ramp length: 150 cm Load bed height: 32 cm Upstand height: 27 cm Tyre size: 185;60R12 Automatic jockey wheel: Yes Construction: Hot-dip galvanised steel Country of production: Germany === HIGHLIGHTS === Professional Hulco Terrax machine transporter Triple-axle version with 3,500 kg gross vehicle weight Net payload of 2,555 kg Strong aluminium loading floor 150 cm loading ramp with supergrip profile Low loading height for easy loading and unloading Automatic fold-away jockey wheel Multiple lashing points for safe transport Hot-dip galvanised chassis Suitable for aerial work platforms, scissor lifts, mini excavators, compact loaders and other machinery === CONDITION === New trailer from stock. Good visual condition and ready for use. Inspection possible on request. === LOCATION & PRICE === Located in Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). This Hulco Terrax-3 3500 machine transporter is designed for professional transport of machinery and equipment. Thanks to its triple-axle chassis, 3,500 kg gross vehicle weight, 2,555 kg net payload, strong aluminium loading floor and 150 cm loading ramp, this trailer is suitable for transporting aerial work platforms, scissor lifts, mini excavators, compact loaders and other compact machines. The trailer is equipped with an automatic fold-away jockey wheel, hot-dip galvanised chassis and multiple lashing points for safe and secure transport. Reliable trailer from our stock in Sittard, Netherlands. Professional transport and export documentation can be arranged on request. === DELIVERY === Bsdpfx Asy Iz Nied Aslg Flexible shipping options available depending on destination and logistics requirements. All transport can be professionally handled by the logistics team of Collé Rental & Sales.

Condition: good (used), functionality: fully functional, power: 24 kW (32.63 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 30 l, color: gold, overall weight: 2,250 kg, maximum load weight: 750 kg, lifting power: 750 kg/m, lifting height: 2,680 mm, tire size: 31x15.50-15, tire condition: 90 %, axle configuration: 4x4, number of seats: 1, emission class: euro3, shovel volume: 0.35 m³, Year of construction: 2016, operating hours: 2,148 h, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, === KEY SPECIFICATIONS === Year: 2016 Model year: 2017 Operating hours: 2,148 h Machine type: Compact wheel loader Serial number: 348014970 Machine type / model code: 348 Version: 348-01 Permissible gross weight: 2,250 kg Bucket capacity: 0.35 m³ Tipping load with bucket: 1,250 kg Payload: 750 kg Drive: Hydrostatic Bodpfoy Iyudjx Ad Ajlg Four-wheel drive: Yes Steering: All-wheel steering Quick coupler system: Yes Cabin: Closed cabin Attachments included: Bucket, pallet forks and work basket Tires: 31x15.50-15 Engine manufacturer: Yanmar Engine power: 24.1 kW Emission standard: Stage IIIA Travel speed: 20 km/h Hydraulic flow: 20 l/min Fuel tank capacity: 30 l CE certification: Yes Country of production: Germany === HIGHLIGHTS === Compact and manoeuvrable Kramer wheel loader Hydrostatic drive system Closed cabin with good all-round visibility Hydraulic quick coupler system Bucket, pallet forks and work basket included All-wheel steering for excellent manoeuvrability CE certified Ready for transport and use === CONDITION === Good working condition with normal signs of use for age and operating hours. Machine is supplied with bucket, pallet forks and work basket. Inspection possible on request. === LOCATION & PRICE === Located in Sittard, Netherlands. Worldwide delivery available. Price €19,950 (EXW / excl. VAT). Kramer 5035 compact wheel loader for sale. This compact and manoeuvrable wheel loader is suitable for a wide range of applications. The machine is equipped with a closed cabin, hydrostatic drive, all-wheel steering and a hydraulic quick coupler system. The machine comes complete with bucket, pallet forks and work basket, making it suitable for different applications such as construction, landscaping, agricultural and yard work. The machine has 2,148 operating hours and CE certification is present. Reliable machine from our stock in Sittard, Netherlands. Professional transport and export documentation can be arranged on request. === DELIVERY === Crane loading possible on request for smooth transport. Flexible shipping options available depending on destination and logistics requirements. All transport can be professionally handled by the logistics team of Collé Rental & Sales.

Condition: good (used), Clamping angle, clamping aid Blodpfxoy Iwado Ad Aeg -Clamping angle: for workpiece clamping -Wall thickness: 24 mm -Dimensions: 300/205/H635 mm -Weight: 62 kg

Condition: excellent (used), mileage: 380,592 km, power: 353 kW (479.95 HP), first registration: 08/2014, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: other, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 12,000 kg, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Power brake booster - Speed limiter - Refrigerator - Air suspension - Media system - Particulate filter - Sun visor - Toolbox - PTO (power take-off) - Central lubrication - Towing hitch = Further Information = Axle configuration Brakes: disc brakes Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steering; Suspension: leaf suspension Front axle 2: Tire size: 315/80/22.5; Max. axle load: 9,000 kg; Steering; Suspension: leaf suspension Rear axle 1: Tire size: 315/80/22.5; Dual tires; Differential lock; Max. axle load: 12,000 kg; Suspension: air suspension Rear axle 2: Tire size: 385/65/22.5; Lift axle; Max. axle load: 8,000 kg; Suspension: air suspension Weights Empty weight: 26,875 kg Payload: 10,125 kg Gross vehicle weight: 37,000 kg Functional Mast: Telescopic (10 sections) Mast length: 26.3 m Lifting capacity: 16,900 kg Lifting height: 2,630 cm Crane: PALFINGER PK92002-SH H, year 2014, mounted behind the cab Body manufacturer: PALFINGER PK92002-SH H CE marking: yes Condition Technical condition: very good Visual condition: very good MAN MAURER TGS 35.480 8X4H-6 BL WITH PALFINGER PK92002-SH H CRANE EURO 5 | L PACKAGE | 480 HP DRIVE 8X4H-6 BL WHEELBASE 530 CM LEAF / AIR SUSPENSION SLEEPER CAB WITH AIR CONDITIONING, REFRIGERATOR MEDIA SYSTEM, PHONE PREPARATION MANUAL GEARBOX Bledpfx Adoyiupdo Aog TRAILER HITCH STROBE LIGHT FRONT AND REAR TOOLBOX LOADING DIMENSIONS: L=545CM, W=247CM PALFINGER PK92002-SH H 10X HYDRAULIC EXTENSIONS PALFINGER WINCH KBW007-A 18M TOTAL 5X JIBS CRANE CAN WORK IN FRONT OF THE CAB VIA 1X FRONT JIB RADIO REMOTE CONTROL MAX. LIFTING CAPACITY AT 4.3M: 16,900 KG MAX. WORKING HEIGHT: 26.3M

Condition: good (used), Year of construction: 2017, operating hours: 6,535 h, load capacity: 2,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, Toyota 8FBM20T Triplex 470 Freelift / Sideshift Electric 2017 6535 hours Continuously updated stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. carries a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our terms and conditions) For a viewing and/or test drive you can make a non-binding appointment. Please call in advance as we are not always on site. Bjdpfxjy Iptvo Ad Aslg Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, mileage: 69,500 km, power: 115 kW (156.36 HP), first registration: 01/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 12 m³, loading space length: 3,540 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Transmission * Manual transmission, 6 gears Lighting and Visibility * Headlight range adjustment * Tinted windows * Daytime running lights Audio & Communication * Radio * Digital radio reception DAB * AUX & USB connection * Mobile phone preparation Bluetooth Exterior * Leaf spring suspension * Exterior mirrors electrically adjustable and heated * All-season tires * Rear doors with 270° opening angle * Trailer connector, 1x13-pin Safety * Driver airbag * Electronic Stability Program (ESP) * Traction control (ASR) * Anti-lock Braking System (ABS) * Outside temperature display * Immobilizer Interior * Cloth seats * Multifunction steering wheel * On-board computer * Partition * Wooden cargo area floor * High plastic sidewall lining in cargo area Comfort * Automatic climate control * Height-adjustable driver's seat * Front passenger bench * Power steering * Adjustable steering column * Electric windows * Central locking system with remote control * Cup holders Cargo Area * Length: 3,540 mm, Width: 1,800 mm, Height: 1,900 mm * Volume: 12 m³ Other Dimensions and Weights Blodsyvc R Njpfx Ad Ajg * Permissible gross vehicle weight: 3,500 kg * Permissible combination weight: 7,000 kg * Wheelbase: 3,520 mm Further Specifications * Used vehicle certification: CERTIFIED PRE-OWNED Standard * Former rental vehicle -----IVECO CERTIFIED PRE-OWNED STANDARD - Fluids topped up (excluding fuel) - De-branded and thoroughly cleaned - Signs of previous use - IVECO CERTIFIED PRE-OWNED PLUS (Surcharge net 2,200.00 + VAT) - New general inspection (TÜV) and emissions test (AU) - New service inspection - De-branded and thoroughly cleaned - Technical check and repair - IVECO CERTIFIED PRE-OWNED PREMIUM (Surcharge net 3,300.00 + VAT) - General inspection (TÜV) and emissions test (AU) - New service inspection - Optical reconditioning - Technical check and repair - Surcharge for tow bar: net 785.00 + VAT - Surcharge for rearview camera: net 880.00 + VAT - Optional: Small or large Iveco warranty available up to 36 months for an additional charge - Subject to prior sale - Your contacts: - Mr. Axel Scheske, Tel. - Mr. Luca Netter, Tel.

Condition: good (used), Year of construction: 2001, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück Blodpfx Adsy Ig R Ee Asg distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good condition (!!) from a maintenance workshop Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side fence, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front emergency stop button - Rear safety guard (protective grille) - original operating instructions

Condition: used, maximum load weight: 2,735 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,260 mm, loading space width: 2,040 mm, total width: 2,100 mm, total height: 990 mm, A23 GW26M0147488 Bjdpoyn Ubwsfx Ad Aelg High-loader with manually operated hand winch (removable), fitted with overrun brake, wooden floor plate, rear drop-leg supports (accessory), 2 loading ramps behind the license plate... and many more features. Subject to errors and prior sale.