Used Elbh 45.000 M3/Hr for sale (6,578)

Condition: used, PLC control, electronic module, interference filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter -Manufacturer: Siemens, mains filter interference filter -Type: :B84131-M3-A116 -Voltage: 440/2500V 50 - 60Hz -Dimensions: 180/105/H50 mm Weight: 1.7 kg Rjdpfx Aeubfynjf Recd

Condition: good (used), Geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: SEW-Eurodrive, geared motor with brake -Type: KH47 DT100L4BMG/HR/TF Rcsdpsik Ac Aefx Af Rsd -Speed: 133 rpm -Power: 3 kW -Hollow shaft: Ø 35 x 180 mm -Protection rating: IP54 -Brake: 16 Nm -Number: 2x geared motors available -Price: per unit -Dimensions: 650/265/H195 mm -Weight: 51 kg/unit

Condition: used, Electric motor, three-phase motor -Manufacturer: Himmel, electric motor from saw-drill / milling machine Rapid DGL / BFA -Type: 2 HR 80 -Power: 1.3 kW -Speed: 2820 rpm Rcodpfx Aegzwxzof Red -Shaft: Ø 19 x 40 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 270/200 / H250 mm -Weight: 11 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 1400 rpm -Power: 1.5 kW -Brake: 20.0 Nm -Shaft on both sides: Ø 14 x 20/19 x 40 mm -Protection class: IP54 Rcodpsfrlt Uofx Af Rsd -Dimensions: 430/200/H260 mm -Weight: 27 kg

Year of construction: 1994, condition: used, Side channel blower, ring blower, vacuum pump -Drive: 0.75 kW -Feed rate: 130 m3 / h -Max. Compression pressure: 195 mbar -Speed: 2800 rpm -Number: 2x pumps available -Price per piece -Dimensions: 320/280 / H420 mm -Weight: 16 kg / piece Rodob R Ubbopfx Af Rjcd

Condition: excellent (used), Year of construction: 2017, operating hours: 595 h, WWB200 SuperGrinder. Perfect machine for kebab factories, sausage and burger producers etc. Has run for 595 hours only. Redjwhagtopfx Af Recd

Condition: excellent (used), Continuous pasta press for short and long pasta. Bought for a project and never used. Rcsdpjyh Rdfefx Af Rjd

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Rcjdpfei Uli Eex Af Rod

Condition: new, functionality: fully functional, machine/vehicle number: 01.1274197402.0001X08, power: 4 kW (5.44 HP), rotational speed (max.): 1,420 rpm, input frequency: 50 Hz, type of input current: AC, overall weight: 101 kg, protection type (IP code): IP54, Multiple available. Operating mode: S1 (continuous operation) Voltage (V): 230 (rated voltage of the motor in delta operation) Current (A): 15.20 A Rcjdpfxju Dkv No Af Red Insulation class: F (higher temperature resistance of the insulation) Mounting form: IM M1AB Braking torque: 75 Nm The SEW-EURODRIVE K77 DV112M4/BMG/HR/TF/ASB8 gearmotor is a powerful and reliable drive solution that is ideal for demanding industrial applications. With a rated power of 5.5 kW and an operating voltage of 400 V, this motor offers high efficiency and excellent torque. The integrated bevel gear ensures a compact design and enables optimum power transmission, while the robust construction guarantees durability and reliability. This geared motor is particularly suitable for use in conveyor systems, mechanical engineering and automation technology where precision and performance are required.

Condition: good (used), Year of construction: 2021, machine/vehicle number: H 21-3743, Offer 26175 Technical data: Rodpfx Aszh Edbof Rscd - max. pressing force up to 25 t - max. ram stroke 160 mm - installation height without straightening unit 675 mm - overhang to the center of the ram 250 mm - table size approx. 1300 x 300 mm - working speed, roughing approx. up to max. 30 mm/s - working speed, finishing approx. 100 mm/s - oil capacity approx. 150 liters - drive 400 V / 10 kW - space requirement approx. W 4900 x H 2400 x D 1500 mm - weight approx. 3000 kg - including: - straightening table extension 2030 + 1520 mm - traversing carriage with mounts on the straightening table - pointed die holder - roller die holder - straightening ram - pivoting feeler gauge with dial indicator

Condition: excellent (used), Year of construction: 2006, track width: 300 mm cutting height: 120 mm max. disc diameter: 350 mm Rsdpfx Aswxrrvof Rscd motor power: 30 kW table width: 750 mm feed adjustable via frequency inverter fence adjustable pneumatically

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2466718, load capacity: 280 kg, overall weight: 14,650 kg, transport length: 9,280 mm, transport width: 2,490 mm, transport height: 2,700 mm, fuel type: electric, color: green, Equipment: all wheel drive, Technical data: Rcodjyxm Uxepfx Af Red Year of manufacture: 2020 Motor: Electric, 48 kW Working height: 28.00 m Platform height: 26.00 m Platform width: 0.9 m Platform length: 2.40 m Outreach: 19.0 m Overall dimensions (L x W x H): 9.28 m x 2.49 m x 2.70 m Load capacity: 280 kg Climbing ability: 40% Driving speed: 4.7 km/h Total weight: 14,650 kg General signs of use, fully functional.

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2466708, load capacity: 280 kg, overall weight: 14,650 kg, transport length: 9,280 mm, transport width: 2,490 mm, transport height: 2,700 mm, fuel type: electric, color: green, Equipment: all wheel drive, Technical data: Year of manufacture: 2020 Engine: Electric, 48 kW Working height: 28 m Platform height: 26 m Platform width: 0.9 m Platform length: 2.4 m Outreach: 19.0 m Overall dimensions (L x W x H): 9.28 m x 2.49 m x 2.70 m Payload capacity: 280 kg Rcodpfx Aoyqy Arsf Rjd Gradeability: 40% Travel speed: 4.7 km/h Total weight: 14,650 kg General signs of use, fully functional.

Condition: excellent (used), CATALOG NUMBER: 7947 Technical specifications: - Track width: 300 mm - Shaft working width: 300 mm - Max. saw blade diameter: 350 mm - Saw blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 750 mm - Table length: 1540 mm – From above: - Kickback barriers (anti-return block for material) Rodpfjzh Ixbjx Af Recd - Metal roller guide - Kickback barriers - Metal roller guide - Shaft with saw blades - 2 smooth metal idler rollers – From below: - Guide rail - Kickback barriers - Track (caterpillar) - Central track lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 37 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 1800x1550x1500 mm - Weight: approx. 1700 kg Advantages: – Italian manufacture – Very good condition – DTR technical documentation – Used multirip saw Net price: PLN 33,900 Net price: EUR 8,070 (based on EUR/PLN 4.2) (Prices may change with significant exchange rate fluctuations)

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Rjdpszcwitsfx Af Recd Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available.

Condition: used, mileage: 560,000 km, power: 368 kW (500.34 HP), first registration: 10/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, parking heater, Manufacturer Scania Model R500 NGS CR20H 6x2 26 m3 Silo - Kompressor - Retarder Year 2020 Condition Good Serial Number YS2R6X20005594073 Ref. nr. 1268147 Reg. date: Last seen: Hk: 500 Km: 560000 Gearbox: Opticruise GRS905R Eurotype: 6 Diesel tank: 1 Tank liter: 500 L Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: CR20H Leather seats: ? Radio: ? Refrigerator: ? Walkie: ? Disc brake: ? ABS: ? Engine brake: ? Retarder: ? Tire Size: 385/65R22,5 - 315/80R22,5 - 385/65R22,5 Cover% left 40% 60% 60% Front suspension: Air Suspension rear: Air Wheelbase: 4150 mm Toolbox: ? Hydraulic system: ? Total weight: 26000 Kg Net weight: 11896 Kg Load capacity 14104 Kg Rcsdpezfu T Tofx Af Red Manufacturer: HMK Bilcon Tank capacity: 26.200 L Separation room: 4 Compressor: ? ATVF 53P

Condition: used, maximum load weight: 23,580 kg, overall weight: 30,000 kg, axle configuration: > 3 axles, first registration: 12/2013, Year of construction: 2013, Equipment: ABS, Manufacturer HMK Bilcon Model 42 m3 Silo tank 6 rum Year 2013 Condition Very good Serial Number UH9FP4BXXD1HB1878 Ref. nr. 8148 Reg. date: Rcsdpfx Aozfu T Hjf Rod Last seen: 18-03-2026 Disc brake: ? ABS: ? Rear axles: BPW Suspension: Air Tire Size: 385/65R22,5 Cover% left 40 - 40 - 40 - 40% Total weight: 30000 kg. Net weight: 6420 kg. Load capacity 23580 kg

Condition: used, mileage: 801,000 km, power: 368 kW (500.34 HP), first registration: 07/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, Manufacturer Scania Model R500 NGS CR20H 6x2 26 m3 Silo - Kompressor - Retarder Year 2020 Condition Good Serial Number YS2R6X20005589555 Ref. nr. 918145 Reg. date: Hk: 500 Km: 801000 Gearbox: Opticruise GRS905R Eurotype: 6 Diesel tank: 1 Tank liter: 500 L Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: CR20H Leather seats: ? Radio: ? Refrigerator: ? Walkie: ? Disc brake: ? ABS: ? Engine brake: ? Retarder: ? Tire Size: 385/65R22,5 - 315/80R22,5 - 385/65R22,5 Cover% left 70% - 50% - 60% Front suspension: Air Suspension rear: Air Rsdpfxozfu Uks Af Recd Wheelbase: 4150 mm Toolbox: ? Hydraulic system: ? Total weight: 26000 Kg Net weight: 11896 Kg Load capacity 14104 Kg Manufacturer: HMK Bilcon Tank capacity: 26.200 L Separation room: 4 Compressor: ? ATVF 53P

Condition: used, mileage: 812,000 km, power: 368 kW (500.34 HP), first registration: 04/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, Manufacturer Scania Rcodpfx Aezfu Tyef Rjd Model R500 NGS CR20H 6x2 26 m3 Silo - Kompressor - Retarder Year 2020 Condition Good Serial Number YS2R6X20005584821 Ref. nr. 148144 Reg. date: 30-04-2020 Hk: 500 Km: 812000 Gearbox: Opticruise GRS905R Eurotype: 6 Diesel tank: 1 Tank liter: 500 L Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: CR20H Leather seats: ? Radio: ? Refrigerator: ? Walkie: ? Disc brake: ? ABS: ? Engine brake: ? Retarder: ? Tire Size: 385/65R22,5 - 315/80R22,5 - 385/65R22,5 Cover% left 30% Front suspension: Air Suspension rear: Air Wheelbase: 4150 mm Toolbox: ? Hydraulic system: ? Total weight: 26000 Kg Net weight: 11917 Kg Load capacity 14083 Kg Manufacturer: HMK Bilcon Tank capacity: 26.200 L Separation room: 4 Compressor: ? ATVF 53P

Condition: used, functionality: fully functional, Full Newman M3 Roller Frame Setup - Selling due to business closure 23 X 31 inch frames (60+ frames) - some are meshed, some are just the frames Newman Stretching Table (requires air - small compressor or link up to current air supply) Selection of mesh panels (approx 10) - or can be used with rolls of mesh of your choice 40n tension can be achieved £1,200 + VAT (ONO) Sold as seen, all in good working order Rjdezb Rgpepfx Af Recd Mid-Wales - UK Buyer responsible for collection or pallet delivery (2) can be arranged at buyers expense

Condition: excellent (used), CATALOGUE NUMBER 8031 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - table width with extension 1030mm - table length 1740mm Rcjdpfxezha Izo Af Rod * from above: - kickback pawls (barrier to prevent material from retracting) 2 rows - sliding roller, metal, pressure roller - kickback pawls/ratchets - sliding roller, metal, pressure roller - roller with saws - 2 smooth, metal sliding rollers * from below: - guide strip - kickback pawls/ratchets - track - central, electric track lubrication - stepless feed speed adjustment - feed motor 1.1kW - main motor 25kW - dust extraction nozzle diameter 1x200mm, 1x120mm - overall dimensions L/W/H 2550x1800x1450mm - weight 1770kg ADVANTAGES - Made in Italy - Unpainted - Very good condition - Used multi-blade saw Net price: 57900 PLN Net price: 13786 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to larger fluctuations)

Condition: used, functionality: fully functional, usable tank capacity: 25,000 l, Item: AV-12176-Vertical Insulated Tank 25000L Exterior dimensions: Dia Ø 2550/2700 mm Total H 7000 mm. Vertical insulated tank 25.000 L Insulated with 50 mm wool completed with stainless steel trapezoid. Conical top with ventilation / cip. Rcsdpfxsuwdhls Af Rod Conical bottom with 3" outlet. Manhole in lower part of cylinder. Powerful topmounted agitator. AISI 904 L

Condition: used, Technical specifications: Track width: 300 mm Max. cutting height: 120 mm Rcjdpfx Afozhumxj Red Max. saw blade diameter: 350 mm Min. saw blade diameter: 200 mm Saw blade speed: 4200 rpm Infinitely adjustable feed rate Automatic lubrication system Anti-kickback protection Laser marker Culaga Dust extraction port: 200 mm Safety switch Power supply: 380 V Main motor power: 26 kW Overall dimensions: Length: 2200 mm Width: 1800 mm Height: 1850 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), number of axes: 3, total length: 2,500 mm, total width: 1,300 mm, overall weight: 1,260 kg, Equipment: CE marking, documentation/manual, Reduce retooling by 4-5 times with pneumatic auto-change and a tool height sensor! Convenience in operations. This CNC router machine can cut and engrave wood, MDF, chipboard, acrylic, plexiglass, PVC, composites, and aluminum. The Wattsan M3 1325 has an increased thickness of housing that allows it to work with heavy workpieces. It can manufacture parts for light industries, interior and exterior decorating, souvenirs, outdoor advertising, working with soft metals and stone, woodworking, and furniture production. You can give our managers a call for additional details! Wattsan M3 1325 characteristics Working area: 1300x2500 mm Positioning precision: 0.03 mm Spindle: 7.5 kW Machine size: 1960x3350x1740 Weight: 830 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Rodpjrywtqjfx Af Recd On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 2018, Marelec M3/6P-6025-DB Compact Grader with Batching Compact graders incorporate infeed, weighing and grading on one belt and one frame. This MARELEC M3/6 compact grader is an easy to use, simple and robust solution. All of this with the same precision as the classic graders. MARELEC sets the new standard for smaller versatile grading systems using pull arms with six stations, combined left and right. This Compact Grader is equipped with the option to batch. Key benefits High accuracy High weighing and grading speed Robust and compact construction User-friendly Selection keyboard MARELEC Z2 Machine is fully checked by Marelec. Manufacturer: Marelec Model: M3 / 6P-6025-DB Year: 2018 Belt speed: 1,5m/sec. Weighing range: 20 - 1.500 gram Resolution: 1 gram Max. speed: 150 pieces/minute (depending on product) Max. product dimensions: 240 (width) x 400 (length) mm Belt width: 250 mm Gates: 6 Machine dimensions LxWxH: 3.500x1.050x1.100 mm Rcsdozddufepfx Af Rod Machine weight: 300 kg.