Used Engel E-Max 200/100 Reinraum for sale (97,240)

Condition: used, maximum load weight: 39,780 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from equipment – full equipment list on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear slope approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform * 5 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed front lashing rings in the platform (LC 10,000 daN) Bodpsx Uvlrjfx Af Rjlh * Cutouts in the outer frame for lashing strap hooks (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over axles with checker plate covering Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * 205/65 R 17.5 twin tyres Axles: * BPW axles, two fixed axles, two air-suspended trailing steering axles with drum brakes and lift/lower function * Trailing steering axles can be locked electronically during reversing via reverse gear or manually Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel Construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * First-class, durable anti-corrosion protection on the standard shot-blasted welding frame, ensured by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single color, RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 pure white * Wheels in silver Electrical System: * Electrical system according to EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Spare wheel carrier in front of front wall * Yellow-red air couplings at the galvanized front connection panel * 4 wheel chocks with holders on the front wall * Mounts in the rear area of the gooseneck for ALU ramps * Galvanized folding supports under the rear slope of the loading platform * Bracket for warning beacon at rear of trailer * Yellow reflector tape as per EU regulations on sides, sliding section, and rear of trailer * On gooseneck and rear end, left and right, holders for warning boards incl. socket * Mud flap at rear of trailer * Manual and documentation on USB stick * European reflector signs (red-yellow) at rear * 80 km/h speed stickers at rear and both sides * Acoustic reverse signal * Load manometer for axle load determination incl. load diagram

Condition: used, Inductive conductivity transmitter, conductivity transmitter, conductivity measurement -Manufacturer: EH Endress Hauser, conductivity transmitter -Type: conducta XR 2 -100434-0100 -Measuring range: 0 to 100% Bjdpfsldk I Dsx Af Rolh -Voltage: 220V 50/60Hz -Dimension: 180/95/H95 mm -Weight: 0.8 kg

Condition: good (used), Inductive sensor, electronics sensor Blodpovmgvmofx Af Rsh -Manufacturer: IFM -Product type: IEA2002-FROG/US-100-IRF -Weight: 25 g

Condition: used, Inductive conductivity transmitter, conductivity transmitter, conductivity measurement Blsdpfx Aeldk Iksf Rsh -Manufacturer: EH Endress + Hauser, conductivity transmitter -Type: conducta XR 2 -Measurement range: 0 to 200 mS -Voltage: 220V 50/60Hz -Dimension: 180/95/H95 mm -Weight: 0.8 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Double grinding machine: Type ES200 PW Bodpfxsg Eg U Re Af Rolh -Grinding discs: max. Ø 230 mm -Motor: Power 0.55 kW -Speed: 2800 rpm -Voltage: 380 V -Dimensions: 510/320/H1230 mm -Weight: 54 kg

Condition: used, Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand Blodpfx Asgmuz Uof Reh -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set, drill jaw -Manufacturer: Röhm, drill jaw BB, size 200, 4-jaw set, 2 sets -Type: 110068 -Jaw width: 20 mm -Dimensions: see photo technical drawing -Price/Sale: only complete set -Overall dimensions: 160/70/H53 mm -Total weight: 2.8 kg Bsdjx Ic Tiopfx Af Relh

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 258676, clamping force: 3,800 kN, screw diameter: 450 mm, injection pressure: 2,400 bar, The E-VICTORY 765H/170W/400 COMBI, manufactured , is a high-performance injection molding machine designed for precision and efficiency in industrial applications. This versatile machine is equipped with dual plasticizing units, offering screw diameters ranging from 22 mm to 55 mm, and a maximum injection capacity of up to 475 cm³. The machine operates with a screw speed of up to 400 rpm and a torque of 900 Nm, ensuring rapid and consistent material processing. The E-VICTORY model is engineered to handle a variety of materials, including GPPS, HDPE, and PP, with specific recovery rates tailored to each material type. The clamping unit of the E-VICTORY 765H/170W/400 COMBI provides a robust clamping force of 4000 kN, with a maximum platen distance of 1500 mm and a minimum mold height of 500 mm. The machine's wide platen size of 1300 mm x 1100 mm accommodates large molds, with a total mold weight capacity of 6000 kg. The injection unit features a nozzle stroke of 400 mm and a 67 kN, ensuring precise injection control. The machine's dry cycle time is optimized at 3 seconds, enhancing production efficiency. Constructed with high-quality materials and advanced engineering, the E-VICTORY 765H/170W/400 COMBI is designed for durability and reliability. It includes six to seven heating zones with a total power consumption of 185 kW, and a cooling power of 7.40 kW, ensuring optimal thermal management. The machine is compliant with industry standards, offering a comprehensive solution for manufacturers seeking high precision and productivity in injection molding operations. With its advanced features and technical advantages, this machine is ideal for applications in automotive, consumer goods, and medical device manufacturing. Bedpjx E T Ulefx Af Rslh

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) Bjdpfx Afex H Ndle Rolh - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 2200387535, Process air cooler / chiller Type: TAEevo Tech 1002 P3-20-OFF MTA S.p.A. Blsdpfxjlgzcdo Af Rjh TAEevo Tech 1002 P3-20-OFF are air-cooled compact water chillers that are suitable for outdoor installation (from -20°C to +46°C). Including crankcase heating, phase monitoring, buffer storage 950 ltr., built-in P3 circulation pump and winter package -20°C (speed control of the fans, condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 200 [682428 Btu (IT)/h] cold water temp. Outlet/ inlet (°C): 7 / 12 Flow rate (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient temperature (°C) 32 refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max power consumption (kW) 99 Max current (A) 167 Starting current circuit (A) 371 Protection class: IP54 Dimensions: Length (mm) 4655, width (mm) 1250, height (mm) 2155 Weight (kg) 2998 Connection Victaulic DN 100 Serial No.: 2200387535 Year of construction 2022 Condition: optically 2, technically ok needed Price: on request in euros (plus VAT from Nettetal) - 3 months warranty Used machines can have optical defects due to their use. (Subject to technical changes and prior sale!) Location: MTA Germany GmbH, 41334 Nettetal

Condition: ready for operation (used), Schunk Gemotec CLM 200-H100 compact slide SN: MK116609,used, normal traces of use, 100% functional, scope of delivery according to photos Blodemz Ecwepfx Af Rsh

Condition: ready for operation (used), Seidel 20K-200/100B - 20K-200 / 100B converter, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Blodpfx Afji Ec Nyj Roh

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor covering approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section - Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN) - 5 pairs of flip-out lashing rings (LC 5,000 daN) - 3 pairs of flip-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) One-piece Steel Ramps: - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice - TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: - Steel structure made of high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Bljdpfx Afow Tpqwo Rjh Electrical system: - Electrical system according to EU regulations - Lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted with blasting wheel machine after welding - Second shot-blasting using corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection - Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL - Rims in silver - Rear section metallized and in RAL 9010 (continuation see ori

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion Blsdpew Tpq Dofx Af Reh - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: used, maximum load weight: 37,535 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel * One mudflap at the rear of the trailer * Manual and documentation on USB stick Bodpfoxgk U Nox Af Rolh * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Blsdpfxou Sd U Uj Af Rsh Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: ready for operation (used), AEG / Schneider Modicon AS-B872-100 800 I/O ANALOG OUT4-20MA 4CH, serial no. 20032987, used, normal signs of use, 100% functional, scope of delivery as per photos Blsdpfx Aji D Tt Tjf Reh

Condition: used, first registration: 04/2002, Make: KRONE Type: SDR 27 Vehicle type: Refrigerated trailer First registered / 04/2002- Bljdpfx Afjv Ndhfe Reh Loading area: 13.40 x 2.47 x 2.70 m Tires: 385/65 R22.5 Tread depth in mm: 4/3/3/8/3/4 Axle configuration: SAF / pneumatic Total weight: 36,000 kg Unladen weight: 7,400 kg Equipment: CARRIER MAXIMA 1200 As seen or advertised, without any additional services or accessories. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We support you with exports, preparing export documents, obtaining license plates, supplier declarations, etc.! The information provided in advertisements, on the internet, on price tags, and in pictures are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability or warranty for typos or data transmission errors. Listed features may need to be checked separately. We expressly reserve the right to prior sale, as we also offer this item on other portals. Information about accessories is provided without guarantee. Subject to change, prior sale, and errors. We offer and strongly recommend viewing and inspection to ensure that the buyer is not misled about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 222866, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,120 cm³, overall weight: 7,100 kg, TECHNICAL DETAILS Clamping force: 3,000 kN Screw diameter: 70 mm Shot volume: 1,120 cm³ MACHINE DETAILS Weight: 7,100 kg Operating hours: 17,000 hours Bodpfx Asw N In Hsf Relh EQUIPMENT Barrier screw with homogenizing unit and mixing head Cleanroom suitability

Year of construction: 2012, condition: good (used), robot 40 RC 200 X= 700mm Y= tandem 1600mm Z= 3320mm B + C Servo year: 2012 price: 8.900€ Blsdpjgkvtxefx Af Rsh contact person: Mr. Rainer Eckerle

Year of construction: 2013, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2013 Bodpfx Afehqmpxj Relh price: 7.500€ contact person: Mr. Rainer Eckerle

Year of construction: 2012, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2012 price: 9.400€ Blsdpegpwgaofx Af Rsh contact : Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2007, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine inkl. Roboter SEPRO Hersteller: ENGEL Typ: e-motion 740/180 KL Baujahr: 2007 Schließkraft: 180 Tonnen Holmabstand: HOLMLOS Schnecken DN: 45 mm Max. Hubvolumen: 318 ccm³ Spritzteilgewicht 286 g/PS Steuerung: CC200 Bsdpfxjx Ddg To Af Rolh Ausstattung: -Roboter, Hersteller SEPRO -2 x Kernzug -Ausblasventil -Schutzzaun -Förderband

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x1100x1300 mm Bodpfsvz Hicjx Af Rolh Weight 200 kg Total power requirement 1 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x900x1900 mm Weight 800 kg Bsdov A Hcxopfx Af Relh Total power requirement 3,5 kw