Used Esterer Complete Sawmill (Stationary) for sale (13,522)

Year of construction: 1982, condition: good (used), pre-cutting saw Esterer KSG-F year 1982 travelling Fjdpfjip T Dlex Accoph with swords with control with length measuring with frame with hydraulics immediately available Location: Austria, near Vienna

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox full bleed trimming’ finishing system. Item for sale: 1 x Xerox complete finishing system for brochure production with the following equipment: Includes A-FN13 booklet finisher Includes CZ module A-FN08 Includes 2-page trimming A-GW07 Includes Plockmatic Pro35 WITHOUT IDM You will receive a complete finishing system for complete brochure production. Plug and play connection to various Xerox machines. Xerox Versant 3100 Xerox Verdant 4100 Xerox Versant 180 Xerox Versant 280 and more... Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Fodpfx Aoxnxy Neccjph Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Fpedpfxsyhduye Acceh Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings • 55 kW saw motor • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected Fpedow I Sg Depfx Acceh • Machine newly painted

Condition: used, Year of construction: 1994, Esterer singulator 8-lane (8 conveyor chains) 2-stage singulator Length: approx. 5 meters Width: approx. 1.5 meters Height: approx. 1.6 meters Fpsdpfxjygfkgo Accoh Location: Austria, near Wiener Neustadt

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH stationary stone crushing plants are designed with a focus on high efficiency and durability, offering long-lasting industrial solutions. Each plant is specifically configured based on the hardness and abrasiveness of the material to be crushed and the desired product size. With production capacities ranging from 50 t/h to 1,000 t/h, they perfectly adapt to projects of different scales. The crusher types used in the plants are selected according to material properties to achieve maximum performance. Our design team creates optimized 3D layout plans using feeder, crusher, screen, bunker, washer, and conveyor components. This ensures high capacity, low energy consumption, and minimal maintenance costs throughout the production process. Each plant is custom-designed to suit the investment budget and operating conditions. Our engineering team offers the most suitable projects and proposals to prevent unnecessary expenses. CONSTMACH stationary crushing and screening plants are equipped with high-quality electronic components from SIEMENS and SCHNEIDER, and minimize operator intervention thanks to a PLC-based fully automated system. This provides safe, fast, and stable production. Fixed Stone Crushing Plant Technical Specifications Production Capacity: 50 – 1,000 t/h Type of Material to be Crushed: Varies according to the desired product type Fpedpfjxqhzhex Accoh Final Product Dimensions: Adjustable upon request Crusher Types: Jaw, impact, cone, or vertical shaft crusher options Why Choose a Fixed Stone Crushing Plant from CONSTMACH? CONSTMACH makes a difference with its engineering approach that offers customized solutions to each customer. Our plants operate continuously for many years thanks to high-quality components, energy-efficient designs, and reliable automation systems. With our after-sales support service that prioritizes customer satisfaction, we are by your side at every stage of your investment. CONSTMACH is the right choice for fixed rock crushing plants offering powerful performance, low operating costs, and maximum efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. Fjdpfx Asxpfuioccoph It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Stationary-30 Fixed Concrete Plant Technical Specifications Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Control Type: Fully Automatic What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: reconditioned (used), functionality: fully functional, 1 branded Esterer electric auxiliary trolley EHK from a small business Track gauge: 790 mm Height top edge of track to top edge of lower creel roller: 390 mm Block support with reversible overrun horn and roller transfer bevel, Liftable chain attachment for prism cutting Lateral movement by separate gear motor Operation from the clamping carriage Swivel rollers renewed and newly mounted Fpsdpfxorrwzbj Accoh Motor with new bearings Rubber buffer renewed

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Fsdjyam Exepfx Accsph Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Location: Austria, near Leoben

Condition: good (used), Trak do drewna Esterer HDN600 przeswit 710mm skok ramy 600mm rozsuwane pily wozek podawczy hydrauliczny wozek pomocniczy urzdzenie rozdzielcze pila kapujaca Fodpfx Acsvpiukecsph

Condition: good (used), Wielopila Esterer Dkv 2 wysokosc ciecia 160mm szer 750mm silnik 30kw 2 pily ruchome lasery stol podajacy stol odbierajacy Fpodpfx Acjvn Auhocoh

Condition: good (used), Trak do drewna Esterer HDN600 przeswit 710mm skok ramy 600mm napinanie pil wozek hydrauliczny wozek pomocniczy urzadzenie rozdzielcze stan bardzo dobry Fsdsvnlb Rspfx Accoph

Condition: good (used), Esterer SS45 full gang saw was technically completely overhauled Only visually the gate is no longer beautiful Passage 45 cm 340 upm 500 stroke with complete hanging, saw blades and Templates with hydraulic roller lifting with splitting wedge with drive power 30 kW with hydraulic power pack with complete switch cabinet Fodpfx Aefvb Etoccsph Please also visit my other advertisements. I look forward to your inquiry.

Year of construction: 1995, condition: ready for operation (used), Manual edger DK 90 consisting of: 2 x under-table crosscut saws, line laser, edger, roller conveyor with slat separator, and tilting table. Naturally equipped with all associated control cabinets and hydraulic power unit. Additionally included are numerous templates and a fixed slat head. Inspection is possible upon prior and mandatory appointment. The price is exclusive of 20% VAT, ex works, excluding dismantling, loading, contract preparation, and customs clearance costs. Fpodpfx Asq U R Eteccjh

Condition: good (used), Complete feed of gang saw Esterer HDN 600 Fpsdpjr Hmhnjfx Accjh was recently removed due to conversion to frequency-controlled feed. immediately available Location: Austria, near Wels

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates Fsdpfx Acsw Dn S Aocjph With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. Fpjdpfx Acoq Nyuvocjh 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means. Fpedpfxeq Ngb Do Acceh

Condition: refurbished (used), functionality: fully functional, The 2024 general overhaul includes, among other things, the die roller, the hydraulic nut, the bearings, the main shaft, the oil pump with filter, and synthetic oil. Only the steel housing is older, but it is in excellent condition. The images of the production line in the hall are from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h MACHINE DETAILS Motor year of manufacture: 2024 Cooler with sieve year of manufacture: 2015 Conveyor belt year of manufacture: 2015 Feed screw year of manufacture: 2015 Fsdpfxjzaricj Accsph EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Complete electrical documentation Conveyor belt Sieve system with automatic cooling Hydraulic nut Die roller Electrical wiring Metering screw for product feed Automatic metering system for filling 4 additional dies of 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new pressure piece (main shaft) Documentation of the overhauled and renewed parts

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Complete packing line used for packing muffins, brownies and cakes, comprising of: 1 x Fuji FW3410CX high-speed box-motion flow wrapper (Serial no. – 032901. Date of manufacture – 2019) with Zodiac HS thermal transfer printer. Fitted with adjustable folding box. Sealing jaws - 300mm wide. Belt width - 240mm wide. Pitch - 230mm. Largest product - 200mm wide x 100mm high. Cut off length - 100mm to 450mm. Overall dimensions - 4.5m long x 1.6m wide x 1.8m high. 1 x Loma Systems CW3 checkweigher with infeed spacer conveyors (Serial no. ACW54376-49727D, Date of manufacture – 2019). Belt width - 280mm wide. Weigh platform - 500mm lonc x 260mm wide. Overall length - 3m long. 1 x Lazy Susan with poly-top. Diameter - 1.2m. Fixed speed. 1 x Endoline top and bottom case sealer. 1 x Loma Systems IQ3+ bulk metal detector with alarm and stop-on-detect reject system (Serial no. – QPB56-30-37541D, Date of manufacture – 2017). Aperture dimensions - 550mm wide x 300mm high (245mm height clearance). Belt dimensions - 1800mm long x 495mm wide. 1 x Codeology Ltd C515 conveyor-mounted print-and-apply label applicator with thermal transfer printer (Serial no. – CT20-000106, Date of manufacture – 2020). 1 x Extendable gravity roller conveyor. Fjdezcfn Depfx Accsph All equipment to be removed from the factory by the Buyer.

Condition: used, Composed of: 1) Dough storage hopper Mod. 'STAR' 2) Conveyor L=500 Mod. 'TRL' 3) Dough extruder Mod. 'RON 1/480' 4) Conveyor L=700 Mod. 'MCI 690' 5) Dough flouring unit L=700 Mod. 'B/M 700L' 6) Multi-roller unit Mod. 'MUL 700' 7) Conveyor L=700 Mod. 'MCI 690' 8) Fat extruder Mod. 'EG-7-E' 9) Overlapping conveyor belts Mod. 'NPP/200' 10) Conveyor L=700 Mod. 'MCI 690' Year of manufacture 2006 Fjdpfx Aowxwiaoccsph

Condition: excellent (used), content of factory set up to produce breakfast cereals such as granola. machinery available includes nut and seed mixing, AC Horn/Telford roasting oven, he could castles, open tumblr, and washer, multi head wire and bagger, Bradman Lake automatic cartoner with automatic loading. Fsdpfx Ajyzbktsccoph

Condition: excellent (used), we have the complete contents of a recently closed high care baby food factory for sale. Machinery available includes Dc Norris cooking vessels with JetCook facility, 3 x Lagarde retort / autoclaves, Toyo Jidoki and Gualapack pouch fillers, Proseal pot sealer Fpjdpfx Acoy H Rqaecsh

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Fjdpfx Aeflz Hdsccoph Back off available.

Condition: used, Line 6 Complete Can Filling LIne Jorgensen fully automated full can cleaner Domino 620i laser marking system with camera unit Graham Labelling System automated labelling line Accusort AL5010 4 head barcode reader Del Packaging IVCL/99/189 flat capping machine Dylog DYXIM D pass through X Ray machine Involvo PTF 28 PW fully automated case packing machine Thermo Scientific VERSA BOX 0 checkweigher Jorgensen fully automated depalletizing system Isoma Elevator L6 can elevator 2016 Isoma De-elevator L6 can de-elevator 2016 Isoma Can Rinser L6 fully automated can rinsing system with invertor, Accusort, Coperion K Tron bulk material vacuum loader 2015 Sweco QC485156+C quick-change separator Aylesbury Automation 630/65 fully automated scoop dropping machine Automated can filling system Ishida DACS-W-030-SB-PB-1 chekweigher 2002 Angelus Model 50 PR DF can seamer Jorgensen Engineering twin head can gas chamber Angelus Model B3 P can seamer Please note, this lot 30466-400 is offered for sale as a complete line. Its components are simultaneously offered as individual lots 30466-401 to 30466-419 Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Fedpfey Uygysx Accsph Successful bidders will be notified within 2 working days.