Used Evobend Gmbh D600 for sale (69,245)

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Godpfxsyizxrj Adgjub Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Gusdpfx Adju Tha Iegeb Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h Gsdpfou Thh Esx Adgsub bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Gedpfsu Th S Sjx Adgjub Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition, see the functional video after the overhaul and is sold with the 12 months OBM parts warranty. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit TruDisk 3302, Trumpf company Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Pipe diameter: 80 - 600 mm Gusdpov Ipcfofx Adgeb Pipe length: 100 - 1250 mm

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: KR 210 R2700 prime, Basic data KR 210 R2700 prime Number of axes: 6 Number of controlled axes: 6 Working envelope volume: 55 m³ Pose repeatability (ISO 9283): ± 0.06 mm Approximate weight: 1111 kg Rated payload: 210 kg Maximum reach: 2696 mm Protection rating: IP65 Protection rating, in-line wrist: IP65 Noise level: < 75 dB (A) Mounting position: Floor Footprint: 830 mm x 830 mm Permissible angle of inclination: ≤ 5° Gusdpfxsyl Ux Dj Adgjb Default color: Base frame black (RAL 9005); Moving parts KUKA orange 2567 Controller: KR C4 Transformation name KR C4: KR210R2700 PRIME C4 FLR Hollow shaft diameter: A1 139 mm (partially occupied by motor cables) Humidity class (EN 60204): - Environmental condition classification (EN 60721-3-3): 3K3 Ambient temperature: Operation: 10°C to 55°C (283 K to 328 K) Storage/transport: -40°C to 60°C (233 K to 333 K) Axis data, KR 210 R2700 prime Motion range: A1: ±185° A2: -140° / -5° A3: -120° / 155° A4: ±350° A5: ±122.5° A6: ±350° Speed with rated payload: A1: 105°/s A2: 107°/s A3: 114°/s A4: 136°/s A5: 129°/s A6: 206°/s Payloads, KR 210 R2700 prime Rated payload: 210 kg Rated mass moment of inertia: 105 kgm² Rated total load: - Rated supplementary load (base frame): - Maximum supplementary load (base frame): - Rated supplementary load (rotating column): - Maximum supplementary load (rotating column): 300 kg Rated supplementary load (link arm): - Maximum supplementary load (link arm): 130 kg Rated supplementary load (arm): 50 kg Maximum supplementary load (arm): 150 kg Nominal distance to load center of gravity: Lxy: 270 mm Lz: 240 mm Exceeding the specified payloads and supplementary loads will reduce the service life of the robot and can overload the motors and gears. It is recommended to always test your specific application with KUKA.Load. If any individual value is exceeded, please consult KUKA Roboter GmbH.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 2,400 mm, loading space length: 4,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Mini Cube Nero 1.0 from Villex Container GmbH is a versatile 4.0-meter container that combines a compact footprint with a surprisingly spacious interior. Measuring 4.0 m in length, 2.4 m in width, and 2.6 m in height, this model offers more space than smaller alternatives while remaining easy to transport. Its 5 cm thick insulation ensures effective thermal protection, while the anthracite-colored panels and base frame (RAL7016) provide a modern and stylish look. The container is equipped with a robust steel door and a standard window (1000 x 1000 mm) for ample natural light. Electrical fittings include a 32A CEE plug, three double power sockets, two LED lights, and a light switch. Weighing just 800 kg, the Villex Mini Cube Nero 1.0 is lightweight, highly portable, and suitable for a wide range of applications. Article number: MINCN1.0 Version: 4.0 m container Length: 4.0 m Width: 2.4 m Height: 2.6 m Gusdpfx Adjy H Huzogjb Insulation thickness: 5.0 cm Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Weight: 800 kg Doors: 1 steel door Windows: 1 standard window (1000 x 1000 mm) Electrics: 32A CEE plug, red; 3 double sockets; 2 LED lights & 1 light switch

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, overall weight: 800 kg, loading space width: 2,400 mm, loading space length: 4,000 mm, loading space height: 2,600 mm, Equipment: lighting, We are offering our Villex Mini Cube Nero 2.0 container in this listing, which can be used as an office container, school container, kindergarten container, refugee container, residential container, or construction site container. Dimensions: 4.0 x 2.4 x 2.6 m Delivery: Nationwide delivery available Standard Features: Condition: New & Fully Assembled Exterior color: RAL 7016 (anthracite) Exterior wall thickness: 50 mm Area: 9.6 m² Weight: 800 kg 1x entrance door (205 cm x 105 cm) 1x double window -> single sash, fixed glazing, and tilt function Electrical installation: 6x electrical outlets (3x double sockets), circuit breaker + protection, surface-mounted conduit (PVC) We manufacture your container fully customized to your specifications! Optional features available at surcharge: Custom sizes, e.g., 7x3 m, 4x2.4 m, double containers, triple units, and more Different window sizes Various exterior and floor colors Practical forklift pockets Lighting Roller shutters Heating WC, shower, toilet, wash basin Kitchen Plastered interior walls And much more Guedpoy Egq Hsfx Adgjb Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance by PayPal or bank transfer. Nationwide delivery time is typically around 1–3 weeks after receipt of order, depending on the destination postcode area. Custom containers are manufactured and delivered within 1–4 weeks.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 2,500 mm, loading space length: 6,000 mm, loading space height: 2,550 mm, Equipment: lighting, The Villex X-Series Black Short 1.0 from Villex Container GmbH is a premium 6.0-meter office container distinguished by its well thought-out features and modern design. Measuring 6.00 m in length, 2.50 m in width, and 2.55 m in height, it offers a versatile usable area of approximately 15 m² – perfectly suited as a mobile office, meeting room, or temporary workstation. Its robust construction with 75 mm thick sandwich panels provides excellent thermal insulation, making the container suitable for year-round use, even under extreme weather conditions. The sophisticated combination of anthracite panels (RAL 7016) and a deep black base frame (RAL 9005) give the container an elegant, striking appearance. Two large aluminium windows (1000 x 1000 mm) with integrated fly screens ensure plenty of light and air, providing not only natural daylight but also effective insect protection. A sturdy steel door (RAL 9005) guarantees security and durability in everyday use. In terms of electrical equipment, the Villex X-Series is fully outfitted: with a 32 A CEE heavy-duty power connection, five power sockets, two LED lights and one light switch, the container is immediately ready for use – whether for technical equipment, workspace lighting, or IT infrastructure. Despite its solid build, the container weighs only 1,500 kg, making it flexible and easy to transport. Article number: XSERS1.0 Variant: 6.0 m container Length: 6.0 m Width: 2.50 m Height: 2.55 m Insulation thickness: 7.5 cm Panel colour: RAL7016 (anthracite) Base frame colour: RAL 9005 (black) Gjdpsy H Em Nofx Adgoub Weight: 1500 kg Doors: 1x door (steel) Windows: 2x windows with fly screens (1000 x 1000 mm) Electrics: 5 power sockets, 2x LED, 32A CEE plug & 1x light switch

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch Guodpfx Adeng Exasgeb OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB Gusdpfx Ajndn Agsdgjb OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° Guodpfenh R Ekjx Adgob optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable Guodponfvx Nefx Adgjb OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV Guodpfx Asndk N Ajdgsb - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) Godpfx Adenfvy Ujgsub - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on Gedpsng A R Ssfx Adgjub torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) Godpfonh R Susx Adgsub - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: Gsdpfx Adsng Amkegsub - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 Gedpfx Adjng Ax Segeub - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment Godpfx Adoyx Hgbogoub • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system Gsdpjyxccrsfx Adgsub - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing Gedsxt Dk Rspfx Adgjub - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: new, Year of construction: 2022, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) Guedpfx Adjyx Hrkegsb • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 5,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Medium Sales Container Cube Nero 1.0 from the Nero-LINE series is a compact and functional sales unit, measuring 5.0 meters in length, 3.0 meters in width and 2.6 meters in height. Its robust construction and modern design in RAL7016 (anthracite) provide a sophisticated appearance, while the 5.0 cm thick insulation ensures efficient thermal performance. The container is equipped with a sturdy steel door insulated with mineral wool and a large sales window (4000 mm x 1200 mm) including roller shutters, making it ideal for mobile retail or food service applications. Electrical equipment features a 32A CEE power connector (red), three double power sockets, two LED lights, and a light switch—ensuring the sales area is well-lit and ready for use. A sales counter is included in delivery and supplied separately; installation is to be carried out by the customer on site, as a permanently installed counter would require a special permit for crane-truck transport. With a weight of 1,100 kg, the container is both stable and versatile—perfect for events, markets, or stationary sales. Individual customization is available upon request. Item number: MEDVKCN1.0 Area: 15 m² Variant: 5.0 m container Length: 5.0 m Width: 3.0 m Height: 2.6 m Insulation thickness: 5.0 cm Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Weight: 1,100 kg Doors: 1x door (steel) Windows: 1x sales window incl. roller shutters (4000 mm x 1200 mm) Electrics: 32A CEE plug (red), 3x double sockets, 2x LED lights & 1x light switch Equipment: 1x sales counter (counter supplied loose and to be assembled by customer) Guedpfsy Hrm Aox Adgeb

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, overall weight: 600 kg, loading space width: 2,400 mm, loading space length: 3,000 mm, loading space height: 2,600 mm, Equipment: lighting, Turnkey assembled, in stock & available for immediate delivery Dimensions: Length: 3.0 m Width: 2.4 m Height: 2.6 m External area: 7.2 m² Insulation thickness: 5.0 cm Colours: Panel: RAL 7016 (anthracite) Base frame: RAL 7016 (anthracite) Wood cladding: RAL 7016 Weight: 600 kg Door: 1x PVC glass door, double glazed Windows: none Electrical installation: In accordance with VDE standard 3-phase, 32A CEE plug (red) 2x double sockets Lighting: Gsdpfx Adoy Egt Isgsub 1x lamp 1x light switch Air conditioning: Split unit for heating and cooling, included in the price ----- Optional additional equipment (for an extra charge): Double-wing doors: For wider access and greater transport options. Additional doors: Flexible access points. Additional windows: Increased ventilation and daylight. Additional double windows: Improved thermal and sound insulation. Additional floor-to-ceiling windows: Modern design and generous lighting conditions. Roller shutters: Privacy and sun protection for adjustable light control. Glass façade: Bright appearance with fully glazed front. Woodstyle façade: Timber-look finish for a warm and aesthetic appearance. Divided rooms: Flexible usage options thanks to additional room separation. WC: Integrated sanitary facility for greater comfort. Shower: Addition to sanitary unit, ideal for longer stays. Air conditioning: Additional heating and cooling functions. Insulation: Choice of 50 mm, 60 mm, 80 mm, 100 mm or 120 mm. Forklift pockets: For easier transport with forklifts. ----- Delivery: Nationwide delivery with crane vehicles available. To calculate a delivery price, please provide your postal code. Delivery time: 1-4 weeks, depending on distance and availability (standard containers or custom builds).