Used Fans Unknown for sale (2,985)

Condition: good (used), Year of construction: 2023, functionality: fully functional, TEXA Konfort 760 Touch RID incl. integrated refrigerant analysis for refrigerant R1234yf KONFORT 760 TOUCH, complete with 10" touch display, 20 kg refrigerant tank, 100 l/min capacity, two-stage vacuum pump, and Bluetooth and Wi-Fi interfaces. Equipped with a vehicle database, protective cover, and manual. TECHNICAL SPECIFICATIONS Suitable for R134a or R1234yf Suitable for BUSES (760 Touch BUS) Fully automatic service control Automatic leak detection Refrigerant measurement with electronic scales Oil contamination prevention system - ATB (Air Tight Bottle - patented) Automatic oil management with electronic scales Measurement of recovered oil quantity by electronic scale Compatible with hybrid vehicles Automatic maintenance management (DATABASE) Manual maintenance control Safety system FPS (Fan Protection System) Internal flushing when changing oil type Service report printout via Wi-Fi 10" touch display Suitable for KONFORT APP Refrigerant tank 20 kg (760 TOUCH) Refrigerant tank 30 kg (for 760 BUS TOUCH) Filling accuracy +/- 15 g High refrigerant recovery rate (over 95%) Lhsdowzhnrspfx Aa Rok Two-stage vacuum pump Automatic oil container recognition (patented) Scales locking system Operating mode: DATABASE Operating mode: MANUAL SERVICE Operating mode: MY DATABASE Multilingual software Automatic service hose compensation Automatic maintenance management Simplified maintenance Automatic control of non-condensable gases Remote customer support Highly accurate automatic oil injection Automatic updates Incl. POE oil container for hybrid vehicles Incl. thermal printer

Condition: good (used), Inclined roller conveyor, Mosca, SRF – used: Lhsdpezpf Icofx Aa Rsk Price ex works: only €1,950.00 (net) ex works! Manufacturer: Mosca Type: SRF Year of manufacture: unknown Further details to follow Condition: good Available: immediately Location: Erfurt area

Condition: good (used), Approx. 8 units of mobile flow rack shelving from Creform, FiFo system, assembly frame with flow levels – used: Price per unit, ex works: €400.00 (net)! Manufacturer: Creform Type: Pipe and joint system Year of manufacture: unknown Dimensions: approx. 180x180x200cm 2 channels 9 swivel casters with brakes Roller rails Condition: good Available: immediately Location: Leipzig Lhodpfxezp Rn Ij Aa Rsk

Condition: good (used), Work bench, Garant, approx.: 200x70x85cm – used: Price at our location: €700 (net)! Lhsdpfxozp Rwis Aa Rek Manufacturer: Garant Type: unknown Year of manufacture: unknown Dimensions: approx.: 200x70x85cm 4 drawers and one door, 1 shelf Condition: good Available: immediately Location: Leipzig

Condition: used, Universal Shaker Angle Adapter / Adapter Devices For sale is a used accessory kit for an electrodynamic shaker or vibration test stand. The kit consists of various solid aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. The components are ideally suited for individual test specimen mounting, special designs, and use on vibration test stands and vibration testing systems. Technical data: Manufacturer: unknown Type: Accessory kit for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners Equipment: Several solid angle adapters Adapter plates of various sizes Clamping and fastening devices Clamping blocks and adapter elements Fastening material and other accessories as shown in the pictures Solid aluminum construction Threaded holes and clearance holes Lsdpfxozpx Ucj Aa Rshk Universally applicable Areas of application: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Test specimen mounting and special designs Scope of supply: Complete accessory kit as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Fastening material Other accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal signs of wear and tear, as well as scratches and indentations, are present. Transport: Only the accessories shown in the pictures are sold. The table or other items not explicitly mentioned in the pictures are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, mileage: 15,634 km, power: 229 kW (311.35 HP), gearing type: mechanical, fuel type: diesel, color: yellow, overall weight: 23,200 kg, empty load weight: 23,200 kg, maximum load weight: 15,000 kg, axle configuration: 4x4, number of seats: 1, first registration: 03/2016, brakes: engine braking, Year of construction: 2016, operating hours: 15,634 h, driver cabin: day cab, Equipment: additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, head guard, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, standard shovel, * German vehicle * Wheel loader test according to §14 completely available * Condition, see photos * original ONLY 15,634 BH Lhedpfx Aovzav Nsa Rsk * Driver's cab rollover protection ROPS / stone chip protection FOPS * ROPS/FOPS meet the requirements of the standards ISO 3471:2008 and ISO 3449:2005 Level II * Turning circle (diameter) (counterweight) 6,804 mm * Small turning circle due to articulated steering * Fuel tank 302 liters * Axles, front axle with manually operated differential lock, rear axle with open differential * Brakes, fully hydraulically encapsulated oil bath disc brakes with integral braking system (IBS) * Planetary powershift transmission (4V/4R), automatic * Detect technologies: rear view camera Cat rear object detection * Immobilizer * Air conditioning, heating and defroster (automatic temperature control and fan control) * Driver's cab with pressurized ventilation and sound insulation (ROPS/FOPS) * Electro-hydraulic control levers, single-axle lever for lifting and tilting function * Electro-hydraulic parking brake * Ergonomic ladders and handrails for cabin access * Warning horn, electric * External rear-view mirror with integrated blind spot mirrors * Multifunctional 18 cm color touchscreen display for image display of the rear view camera, time and machine parameters * Radio including antenna, loudspeaker * Seat with fabric cover, air-suspended * Steering joystick, electro-hydraulic, speed-dependent with force feedback * Sliding window (left and right) * Reverse warning signal * Fender, sheet steel, front with mud flap and rear with extension * Engine hood (plastic) with electric tilting device * Sight glasses: engine coolant, hydraulic oil and transmission oil level * Working hydraulic pump type adjustable piston * ? Maximum travel speed of the standard machine with empty bucket and standard tires (L3) with a rolling radius of 826 mm. * Speed with gears: Forward 1 6.5 km/h Forward 2 13.0 km/h Forward 3 23.5 km/h Forward 4 39.5 km/h Reverse 1 7.1 km/h Reverse 2 14.4 km/h Reverse 3 25.9 km/h Reverse 4 39.5 km/h * Operating weight 23,220 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Lsdezp E Dkepfx Aa Rjhk Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Mechanical engineering Automotive industry Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Universal Shaker Accessories / Clamping Devices For sale is a used accessory set for an electrodynamic shaker or vibration test stand. The set consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, retaining elements, precision chucks, and other accessories for vibration testing. The components are ideally suited for individual test specimen setups, special designs, and use in vibration test stands. Technical data: Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Equipment: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Retaining and fastening elements Solid aluminum constructions Precision-engineered components Threaded holes and clearance holes Universally applicable Further accessories as shown in the pictures Application areas: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen setups and special designs Scope of delivery: Complete accessory set as shown in the pictures Clamping devices Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Further accessories as shown in the pictures Condition: Used. Ljdpfozpya Hex Aa Rehk Visual condition as shown in the pictures. Normal wear and tear, scratches, and pressure marks are present due to age. Transport: Only the accessories shown in the pictures are sold. The table shown in the pictures and other items not explicitly mentioned are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230A Dust Collector is a high-performance dust extraction system designed for the efficient removal of sawdust, wood chips, and fine wood dust generated during woodworking operations. This compact and versatile dust collector is ideal for woodworking workshops, production facilities, and home workshops where effective dust extraction is essential for maintaining a clean and safe working environment. The FM230A comes supplied with a 2.5 m flexible Ø100 mm extraction hose, allowing quick and convenient connection to woodworking machines such as planers, table saws, spindle moulders, and thickness planers. The flexible hose enables the dust collector to be positioned wherever needed within the workshop, ensuring efficient extraction directly at the source of dust and chip generation. Its powerful extraction fan delivers an airflow capacity of up to 1,080 m³/h, providing rapid and efficient removal of sawdust and airborne dust particles. A robust steel construction combined with a heavy-duty metal impeller ensures stable operation, long service life, and reliable performance even under intensive daily use. The mobile wheeled base allows easy transportation between workstations, while the dual-bag filtration system effectively separates air from collected waste. As a result, the FM230A helps maintain a cleaner workshop while improving operator safety, visibility, and overall working comfort. Key Features Supplied with a 2.5 m Ø100 mm flexible extraction hose Airflow capacity up to 1,080 m³/h for efficient dust and chip extraction High-performance fan for sawdust, chips, and fine wood dust 0.75 kW single-phase motor (230 V) suitable for standard power outlets Durable metal impeller for long-lasting, reliable operation Mobile design with transport wheels for easy repositioning Efficient dual-bag filtration system Large waste collection bag for extended operating time Compact footprint, ideal for small and medium-sized woodworking workshops Applications The CORMAK FM230A woodworking dust collector is suitable for use with a wide range of woodworking machinery, including: Surface planers and jointers Thickness planers Table saws Spindle moulders Wood sanding machines Its high airflow capacity effectively removes sawdust and wood dust generated during machining, improving workplace visibility while reducing airborne dust levels. Standard Equipment CORMAK FM230A dust collector Ø100 mm flexible extraction hose (2.5 m) Lhjdpeytn Tdefx Aa Rjk Fabric filter bag Waste collection bag Bag retaining clamps Mobile wheeled base Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,080 m³/h Motor speed 2,800 rpm Maximum vacuum pressure 1,000 Pa Noise level 68 dB Number of bags 2 Extraction inlet diameter Ø100 mm Extraction hose length 2.5 m Collection bag capacity 90 L Height 1,800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: good (used), working width: 2,550 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), Guillotine SAFAN - HT 255-8 MACH-ID 9237 Make: SAFAN Type: HT 255-8 Control: ARA TOUCHSCREEN Touchscreen backgauge Maximum sheet thickness: 8mm Max. cutting length: 2550mm Strokes on full length: 19mm Strokes in short 1000 length:40 Cutting angle: 0,5 - 2 Gr° Length backgauge: 0 - 1000mm Number of down holders: 17 Approach speed: 200mm/sec. Power: 15kW Length: 3400mm Lhjdoxdb Eyopfx Aa Rek Width: 2300mm Height: 2150mm Weight: 8900kg

Condition: used, mileage: 897,942 km, power: 340 kW (462.27 HP), first registration: 10/2016, fuel type: diesel, empty load weight: 11,635 kg, maximum load weight: 14,365 kg, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2024, brakes: retarder, color: other, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, cruise control, differential lock, onboard computer, trailer coupling, , Manufacturer: DAF - Type/Model: CF 460 FAN 6x2 - First registration: 25.10.2016 - Mileage: 897.942 km - Number of axles: 3 - Emission class: Euro6 - Gearbox: Automatic - Suspension: Air - Lift axle - Steering axle - Brake: Disc - Length: 9020 mm - Width: 2500 mm - Height: 3210 mm - Unladen weight: 11635 kg - HU date: 02.2024 - Body manufacturer: Schwarte - Tank material: Stainless steel - Total tank volume: 16500 L - Tank chambers: 3 - System designation: Schwarte V 2000 - Centrifugal pump - MAK 3002 - Sampler Probe - CIP cleaning Lhodoq Umu Uopfx Aa Rok

Condition: good (used), Year of construction: 2023, operating hours: 159 h, Used, oil-free, variable 55 kW screw compressor Immediately available! (Subject to prior sale!) ALMIG LENTO 55 WK (water-cooled) with Air Control Premium controller The compressor is in very good condition and has only run for 157 hours so far. Year of manufacture: 2023 Operating hours: 157 h Technical data Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Lhedpoxud Eqjfx Aa Rok Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). 2. Felder AF 14 mobile dust extraction unit (included): Lodpfjzrl A Ejx Aa Rohk Model: Felder AF 14 (movable on rollers) Power: Powerful motor with robust steel fan wheel Airflow: Max. 2,350 m³/h for excellent chip extraction Convenience: Practical quick-change system for chip bags Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement.

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2026, DGUV certified until: 09/2027, Equipment: CE marking, Factory overhauled fan motor WP rack oven Lodpocn Nr Uofx Aa Rohk Circulation motor for Unitherm all models in stock! For every bakery with this bakery technology! immediately available! with warranty

Condition: used, Year of construction: 2008, 12 motors of 15kW Disassembled into 6 parts: Part 1: 2x Upper part with motors 4000kg Lhsdpfx Aaewiwpzo Rek Part 2: 2x Intermediate part with filter bags 4000kg Part 3: 2x Lower part with legs 2000kg Remainder: Return lines and 1x switch cabinet. Dismantling takes place on Extraction is loaded onto the truck. - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8011510B - Capacity [m³/h]: 80000 - Number of filter bags [pcs]: 384 - Filter length [mm]: 2500 - Filter diameter [mm]: 230 - Filter surface area [m²]: 72 - Main fan [pcs]: 12 - Main fan power [kW]: 15.0 - Nominal airflow [m/s]: 22 - Extinguishing system: Yes - Disassembled: Yes - Control cabinet present: Yes - Shaking system: Yes - Extraction: Underpressure installation Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: Ledpfx Aozq Tzaea Rjhk * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: good (used), Year of construction: 2011, functionality: fully functional, cooling capacity: 380.9 kW (517.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,147 kg, input voltage: 400 V, total width: 2,300 mm, total length: 5,350 mm, total height: 2,450 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE CGAM140 380.9 KW Cooling capacity: 380.9 kW / 108.3 tons (12/7 — 35°C) Year of manufacture: 2011 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss CSHN315 (scroll) + 2 pcs. Danfoss CSHN250 (scroll) Lhedpfx Aaozqzrgs Rjk Type of refrigerant: R410A Number of fans: 8 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump Wilo, buffer tank 762 l, expansion vessel 60 l. Dimensions: 5.35x2.3x2.45 m Weight: 4147 kg Working hours: 7343/3545/6326/7990/5866/6489 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, mileage: 1,001 km, driver cabin: other, gearing type: other, loading space volume: 2 m³, loading space length: 3,000 mm, loading space width: 1,980 mm, loading space height: 400 mm, Vehicle location: Bovenden Body: Platform body with aluminum side panels, external rear frame width approx. 860 mm! Year of manufacture unknown, as no identification plate is available! Lhjdpfxszrpvvj Aa Rjk Rear support/crossbar for the side panel is missing (see photos). ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS Ledpezq Axzefx Aa Rohk • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Amis ZBP 50 S Duo sawdust briquetting machine Year of production 2019 Load capacity up to 140 kg depending on material 3.800 working hours Briquettes Ø 50 mm Tank with a capacity of 1.2 m³ Lhsdpfxoumwm So Aa Rjk Roller with feeder Pre-ironing Screw conveyor Hydraulic pump motors, 7.5 kW each Fan cooling Sawdust level sensor in the tank Hydraulic oil tank 100 l SIEMENS control system Dimensions length x width x height 3000 x 2400 x 1700 mm Weight 2000 kg The price of the new machine is 39.800 Euro

Condition: used, Year of construction: 2019, operating hours: 6,742 h, total height: 2,200 mm, total length: 6,950 mm, total width: 1,100 mm, Colour: White Weight: 3.700 kg - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH00001378 - Operating hours: 6742 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit Lhedpozr Hyxefx Aa Rok - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Fine milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Min. edge band thickness [mm]: 10 - Max. edge band thickness [mm]: 60 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 25 - Feed speed control: Variable - Glue system: Glue pot - Type of glue: PUR/EVA - Voltage [V]: 400 - Current consumption [A]: 47 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 6950mm x 1100mm x 2200mm (l x w x h) - Transport weight [kg]: 3700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, DCV6500TC VIBER – Professional Industrial Dust Extraction System with Automatic Filter Cleaning and Heat Recovery The DCV6500TC VIBER is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. It combines high performance, quiet operation, and energy-saving technologies. The unit is equipped with the VIBER system (automatic filter cleaning), TC technology (sound-insulated head housing), REHEAT system (heat recovery), and DAMAGE PROTECT (mechanical rotor protection). Main Advantages of the Machine Automatic VIBER filter cleaning system – effective filter cleaning without interrupting operation. REHEAT heat recovery system – recovers heat from exhaust air and improves thermal comfort. DAMAGE PROTECT system – protects key components against mechanical damage. Fully enclosed TC housing – reduces noise and vibrations during operation. High efficiency of 6500 m³/h – effective dust extraction from multiple workstations simultaneously. Large waste container capacity – 500 litres, reducing the frequency of emptying. Design and Technology The DCV6500TC VIBER has been designed for maximum reliability and long-term operation. The robust steel construction minimizes vibration transfer, while the dynamically balanced metal rotor ensures quiet operation and system stability. The specially designed fan blade geometry improves extraction efficiency while reducing energy consumption. The TC housing with acoustic insulation effectively lowers noise levels in the production area. Precision and Work Efficiency The filtration system, based on 32 polyester filters, captures particles down to 5 microns in size. For even higher filtration efficiency, optional HEPA filters can be installed. Quick-access waste containers and intuitive control via the electrical control cabinet improve operator comfort and increase overall productivity. Applications The DCV6500TC VIBER is an industrial-grade central dust extraction system designed for cooperation with machines such as: Ljdpfsuc U N Uox Aa Rohk sanding machines, panel saws, edge banders, milling machines. It is ideal for continuous operation in manufacturing plants where air quality and the reliability of the extraction system are essential. Standard Equipment VIBER system – automatic filter cleaning TC insulated housing for noise reduction REHEAT heat recovery system DAMAGE PROTECT mechanical rotor protection Control cabinet with main switch Mobile waste containers with viewing windows – 2 × 250 L Optional Equipment HEPA filters Ceiling-mounted extraction system Additional suction pipes and connectors Technical Specifications Parameter Value Motor power S1 5.5 kW / 400 V, 50 Hz Motor speed 2900 rpm Extraction capacity 6500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 280 mm Air velocity 28–32 m/s Filtration area 16 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 32 Waste container capacity 2 × 250 L Dimensions (L × W × H) 2440 × 930 × 2270 mm Weight 440 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK DC3000 Cyclone Dust Collector – Advanced Sawdust and Dust Extraction System The CORMAK DC3000 is an advanced cyclone dust extraction system designed for intensive dust collection processes in woodworking, furniture manufacturing, and metalworking industries. Thanks to its modern cyclone separator, powerful centrifugal sawdust fan, and dual filtration system, the unit efficiently removes both coarse and fine dust particles from the air. The DC3000 sawdust extractor is equipped with an automatic filter cleaning system, ensuring consistent performance and reduced maintenance requirements. Key advantages Automatic filter cleaning system – maintains constant extraction efficiency and reduces downtime. Cyclone separator – effectively separates larger dust particles before they reach the main filter. High-performance centrifugal fan – provides strong suction with low operating noise. Dual filtration system – suitable for both dry and damp sawdust applications. Compact and mobile design – equipped with a durable metal waste container for convenient operation. Lhjdpjwwtz Nofx Aa Rok Precision sealing system – airtight connections ensure high vacuum performance. Construction and technology The CORMAK DC3000 is equipped with a powerful 3 kW three-phase motor (400 V) operating at 2,800 rpm. The centrifugal fan generates high vacuum pressure, enabling efficient extraction even from multiple suction points. An integrated pressure gauge allows real-time monitoring of filter condition and system performance. The cyclone separator reduces the load on the main filter by removing heavier particles before filtration, extending filter life and improving overall efficiency. Precision and performance The cyclone separation system effectively removes larger contaminants, significantly reducing filter clogging. With an extraction capacity of up to 7,000 m³/h, the DC3000 provides efficient operation in multi-point extraction systems and high-dust environments. The combination of two collection containers and four transport wheels improves functionality, mobility, and ease of operation in industrial environments. Applications The CORMAK DC3000 dust extraction system is suitable for: woodworking plants and sawmills furniture manufacturing and flooring industries workshops processing soft metals building material warehouses with high dust levels Standard equipment Automatic filter shaker system Pressure gauge Dual filtration system (pre-filter and main filter) Metal container under the cyclone separator Transport wheels Optional equipment Additional suction outlets with different diameters Pipe distribution systems for workshop-wide extraction networks Protective filter covers Technical specifications Parameter Value Extraction capacity 2,000 – 7,000 m³/h Noise level 75 dB Fan speed 2,800 rpm Suction connections 3 × Ø100 mm / 1 × Ø200 mm Number of containers 2 Motor power 3 kW / 400 V Dimensions (L × W × H) 1300 × 1000 × 2200 mm Weight 219 kg

Condition: new, Year of construction: 2026, DCV8900TC VIBER Industrial Dust Collector – Advanced Extraction System with Automatic Filter Cleaning The DCV8900TC VIBER is a modern industrial dust extraction system designed for intensive operation in professional woodworking plants and industrial production facilities. Combining advanced technology with maximum efficiency, it ensures stable extraction performance while reducing noise and vibration levels. The integrated VIBER automatic filter cleaning system minimizes maintenance requirements and maximizes operational reliability. Key advantages VIBER system – automatic filter shaking and cleaning without interrupting operation. TC acoustic enclosure – effective noise insulation and vibration reduction. DAMAGE PROTECT system – mechanical protection against the intake of hard foreign objects. REHEAT heat recovery system – recovers heat from exhausted air, improving energy efficiency. High airflow capacity of 8,900 m³/h – designed for large industrial facilities. High airtightness construction – cleaner air and reduced heat loss inside the production hall. Construction and technology The extraction unit is equipped with a reinforced metal impeller that is dynamically balanced to ensure stable, quiet, and reliable operation. The fan blade geometry has been optimized for maximum suction efficiency and reduced energy consumption. The integrated REHEAT system enables recovery of thermal energy from discharged air, significantly lowering operating costs and improving the overall efficiency of the ventilation system. Precision and performance The DCV8900TC VIBER maintains a constant suction velocity of 28–32 m/s, even when operating with multiple machines simultaneously. Polyester filters with a filtration accuracy of up to 5 microns, with the option of installing HEPA filters, ensure excellent air quality in demanding industrial environments. The automatic filter cleaning system maintains consistent airflow performance and reduces downtime associated with manual maintenance. Applications The DCV8900TC VIBER is designed for large-scale woodworking, furniture manufacturing, and industrial production facilities. It is ideal for extraction from machines such as: edge banding machines sanding machines panel saws format saws CNC woodworking equipment The unit works perfectly as a central dust extraction system for multiple production stations operating simultaneously. Standard equipment Automatic VIBER filter cleaning system TC acoustic insulated enclosure REHEAT heat recovery system DAMAGE PROTECT protection system Control cabinet Metal waste containers (500 L) Polyester filter cartridges Optional equipment HEPA filter system Additional air distribution system Lhodpfx Aaeudaazs Rjk Ceiling-mounted extraction connections Technical specifications Parameter Value Motor power 7.5 kW / 400 V, 50 Hz Motor speed 3,000 rpm Extraction capacity 8,900 m³/h Maximum vacuum pressure 3,000 Pa Noise level 80 dB Suction inlet diameter 300 mm Air velocity 28–32 m/s Filter surface area 20 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 45 Dimensions (L × W × H) 2400 × 1170 × 2240 mm Weight 500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300 Dust Collector – High-Performance Sawdust Extraction System The CORMAK FM300 is a high-performance dust extraction unit designed for use in medium and large woodworking shops, furniture factories, and production facilities. Equipped with a 1.5 kW motor, a durable metal impeller, and large-capacity 150 L filter bags, it provides a reliable and long-lasting solution for efficient dust extraction from woodworking machines and workstations. With an airflow capacity of 2,530 m³/h, the FM300 can effectively support several machines at the same time. Key advantages High airflow capacity of 2,530 m³/h – efficiently removes large amounts of sawdust and dust in a short time. 1.5 kW motor – reliable and energy-efficient drive powered by a 230 V supply. Metal dynamically balanced impeller – ensures quiet, stable, and vibration-free operation over a long service life. Large 150 L bag capacity – reduces the need for frequent emptying and improves workflow efficiency. Y-type suction outlet – 2 × Ø100 mm or 1 × Ø130 mm – allows extraction from two workstations simultaneously or from one larger machine. Mobile steel construction – four transport wheels make it easy to move the unit around the workshop. Quick bag mounting system – simplifies maintenance and saves operator time. Construction and technology The CORMAK FM300 woodworking dust collector has been designed for intensive operation in industrial environments. The core of the machine is a centrifugal sawdust fan equipped with a metal impeller, dynamically balanced to eliminate vibration and reduce operating noise. The robust steel construction ensures durability and resistance to mechanical damage. The standard Y-type outlet enables quick connection of hoses to various woodworking machines. Precision and performance The FM300 provides highly efficient dust extraction under demanding working conditions. The 2,850 rpm motor maintains a stable airflow, allowing continuous operation with multiple woodworking machines. The dual-bag system, consisting of a filter bag and a collection bag with a total capacity of 150 liters, enables long operating cycles with minimal downtime. Applications The CORMAK FM300 is suitable for: Professional woodworking and furniture factories – for use with panel saws, thickness planers, routers, and sanding machines. Small production lines – as a central sawdust extraction system for several workstations. Technical schools and training workshops – safe, efficient, and easy-to-use dust extraction. Service workshops – point extraction for medium and high-intensity woodworking operations. Standard equipment Y-type suction outlet (2 × Ø100 mm or 1 × Ø130 mm) Mobile metal base Two fabric bags: filter bag and collection bag Optional equipment Ø100 mm extraction hose Galvanized hose clamps Disposable plastic collection bags Technical specifications Parameter Value Lodpfsy Exn Rjx Aa Rshk Extraction capacity 2,530 m³/h Vacuum pressure 1,800 Pa Noise level 70 dB Motor speed 2,850 rpm Motor power 1.5 kW Power supply 230 V Bag capacity 150 L Number of bags 2 Suction outlet diameter 1 × Ø130 mm or 2 × Ø100 mm Dimensions (L × W × H) 940 × 510 × 1960 mm Weight 56 kg Technical documentation (DTR) Included CE Declaration of Conformity Included